Francisco de Assis Brito Filho
Research Subjects
Research Interests
Francisco de Assis Brito Filho has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Isaac Barros Tavares da Silva
Department of Engineering and Technology Federal Rural University of the Semi‐Arid Mossoró Rio Grande do Norte Brazil
5 shared publications - Leonardo Oliveira de Sousa
Center of Engineering, Federal Rural University of Semi-Arid,Mossor,Brazil
5 shared publications - Samanta Mesquita de Holanda
Federal Rural University of the Semi-Arid,Dpt. of Engineering and Technology,Mossor,Brazil
5 shared publications - Mirelli S. da Silva
Federal Rural University of Semi-Arid,Center of Engineering,Mossor,Brazil
4 shared publications - Gabriel Goncalves Machado
Advanced Wireless Technologies Laboratory, Ulster University, Belfast Campus, Belfast, U.K.
2 shared publications - Boris Murmann
University of Hawai‘i at Manoa
1 shared publication
Latest Publications
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Firat Outer Model Fractal Evaluation on Microstrip Patch Antennas
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Firat Outer Model Fractal Evaluation on Microstrip Patch Antennas
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Explainable ANN for Complementary Split Ring Resonator Design
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Explainable ANN for Complementary Split Ring Resonator Design
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Evaluating Single- and Multi-Topology XGBoost Models for CSRR Inverse Design
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Evaluating Single- and Multi-Topology XGBoost Models for CSRR Inverse Design
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Biodegradable Chitosan-Nb 2 O 5 Substrates for Microwave Devices
- 22 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Biodegradable Chitosan-Nb 2 O 5 Substrates for Microwave Devices
- Open Access
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Latin America Transactions
- Vol. 23 (5) , 444-450
A 2.4 GHz Wireless Temperature Sensor with 0.93 C precision designed in 130 nm CMOS technology for Internet of Things applications
Temperature sensors are present in many applications within the context of the Internet of Things, such as monitoring people, equipment, homes, industries, among others. Some of these portable devices need low power consumption, be compact, and have a linearity range for their application. There- fore, this work proposes a wireless temperature sensor developed in 130-nanometer CMOS technology, designed to operate in the 2.4 GHz ISM band. The wireless sensor was developed using exclusively open-source EDA tools and the Skywater 130 nm openPDK. The devices linearity as evaluated between -50C to 200C, demonstrating a maximum inaccuracy of 0.93 C in a range from 12.0 C to 144.0 C, while consuming only 1.6 mW and occupying an area of 0.028 mm, including the RF block. Additionally, this work was compared with sensors reported in the state of the art and its area and maximum error were smaller.
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Latin America Transactions
- Vol. 23 (5) , 444-450
Open AccessA 2.4 GHz Wireless Temperature Sensor with 0.93 C precision designed in 130 nm CMOS technology for Internet of Things applications
Temperature sensors are present in many applications within the context of the Internet of Things, such as monitoring people, equipment, homes, industries, among others. Some of these portable devices need low power consumption, be compact, and have a linearity range for their application. There- fore, this work proposes a wireless temperature sensor developed in 130-nanometer CMOS technology, designed to operate in the 2.4 GHz ISM band. The wireless sensor was developed using exclusively open-source EDA tools and the Skywater 130 nm openPDK. The devices linearity as evaluated between -50C to 200C, demonstrating a maximum inaccuracy of 0.93 C in a range from 12.0 C to 144.0 C, while consuming only 1.6 mW and occupying an area of 0.028 mm, including the RF block. Additionally, this work was compared with sensors reported in the state of the art and its area and maximum error were smaller.
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Design & Test
- Vol. 41 (6) , 5-7
Open-Source Silicon—Unleashing Innovation and Collaboration
- 25 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Design & Test
- Vol. 41 (6) , 5-7
Open-Source Silicon—Unleashing Innovation and Collaboration
- 25 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (19) , 23713-23720
Soil Moisture Monitoring System Based on Metamaterial-Inspired Microwave Sensor for Precision Agriculture Applications
This paper presents a new soil moisture monitoring system for precision agriculture applications. The system consists of a metamaterial-inspired microwave sensor and an electronic back-end. The sensor was built on a biodegradable dielectric substrate, emphasizing sustainability, and utilizes a complementary split-ring resonator coupled to a microstrip line for excitation. This resonator, being a planar artificial structure with metamaterial properties, exhibits composite left/right-handed propagation, thereby displaying sensitivity to the dielectric constant of the applied medium. Accordingly, the sensing mechanism involves establishing a correlation between soil moisture content and the relative displacement of the sensor’s resonance frequency, which varies as the soil’s dielectric constant changes due to moisture variations. The back-end is controlled by an ESP32 module, which fulfills the tasks of signal capture, processing the data, and delivering the corresponding soil moisture. The transmission of data occurs via Wi-Fi employing the MQTT protocol. To ensure accuracy, the sensor was calibrated using a gravimetric-based method for sandy and clay soil types. A curve-fitting model was extracted, exhibiting remarkable precision (R 2 = 0.997), enabling the system to detect moisture levels from 0% to 20% for both soil types. The overall relative error was found to be 3.6% for sand and 8.3% for clay. Finally, the results obtained from the evaluation of the system in typical sandy soil conditions are presented. The system demonstrated its effectiveness by continuously detecting moisture levels ranging from 5% to 11% over a duration of 33 hours, thereby confirming its viability for practical implementation.
- 25 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 23 (19) , 23713-23720
Soil Moisture Monitoring System Based on Metamaterial-Inspired Microwave Sensor for Precision Agriculture Applications
This paper presents a new soil moisture monitoring system for precision agriculture applications. The system consists of a metamaterial-inspired microwave sensor and an electronic back-end. The sensor was built on a biodegradable dielectric substrate, emphasizing sustainability, and utilizes a complementary split-ring resonator coupled to a microstrip line for excitation. This resonator, being a planar artificial structure with metamaterial properties, exhibits composite left/right-handed propagation, thereby displaying sensitivity to the dielectric constant of the applied medium. Accordingly, the sensing mechanism involves establishing a correlation between soil moisture content and the relative displacement of the sensor’s resonance frequency, which varies as the soil’s dielectric constant changes due to moisture variations. The back-end is controlled by an ESP32 module, which fulfills the tasks of signal capture, processing the data, and delivering the corresponding soil moisture. The transmission of data occurs via Wi-Fi employing the MQTT protocol. To ensure accuracy, the sensor was calibrated using a gravimetric-based method for sandy and clay soil types. A curve-fitting model was extracted, exhibiting remarkable precision (R 2 = 0.997), enabling the system to detect moisture levels from 0% to 20% for both soil types. The overall relative error was found to be 3.6% for sand and 8.3% for clay. Finally, the results obtained from the evaluation of the system in typical sandy soil conditions are presented. The system demonstrated its effectiveness by continuously detecting moisture levels ranging from 5% to 11% over a duration of 33 hours, thereby confirming its viability for practical implementation.