Jun‐Hyung Im
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jun‐Hyung Im has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Young-Ki Kim
Department of Chemical Engineering Pohang University of Science and Technology (POSTECH) Pohang Republic of Korea
5 shared publications Kwang-Suk Oh
Department of Chemical Engineering
2 shared publicationsMyeonggeun Han
Department of Chemical Engineering
2 shared publicationsTaesu Choi
Department of Chemical Engineering
2 shared publicationsYeongseon Choi
Department of Chemical Engineering Pohang University of Science and Technology (POSTECH) Pohang 37673 Republic of Korea
2 shared publications- Yong-Young Noh
Pohang University of Science and Technology
2 shared publications
Latest Publications
- Open Access
- 31 July 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70359
Theory‐Guided Low‐Speed Centrifugation for High‐Purity Boron Nitride Nanotubes
Boron nitride nanotubes (BNNTs) are promising building blocks for next‐generation technologies, yet synthesis‐derived impurities and structural damage from conventional purification methods (e.g., harsh acid treatments, high‐speed centrifugation) hinder their practical applications. Here, we report a theory‐guided low‐speed centrifugation strategy for high‐purity BNNT enrichment without detectable structural damage. Leveraging fundamental sedimentation principles, this approach capitalizes on the distinct sedimentation contrast between compact impurities and high‐aspect‐ratio BNNTs. This mechanism enables highly selective separation, where impurities sediment rapidly while BNNTs remain suspended. Comprehensive experimental validations confirm that estimated BNNT purity approaching ∼95% is achievable, providing a favorable purity–recovery balance while preserving nanotube morphology and dispersibility under the tested conditions. The strategy exhibits versatility across tested surfactant systems in environmentally benign aqueous media, eliminating the need for strong acids or organic solvents while maintaining compatibility with ionic and nonionic stabilizers. Importantly, the purified BNNT dispersions retain their capacity for Onsager‐type anisotropic assembly to form uniformly aligned architectures during subsequent gravity filtration. This offers direct opportunities for advanced anisotropic applications, including thermal management, mechanical reinforcement, and directional transport. By unifying sedimentation theory with practical processing, this work establishes low‐speed centrifugation as a viable and sustainable strategy for high‐aspect‐ratio one‐dimensional nanomaterials.
- 31 July 2026
- Published by Wiley in Small Science
- Vol. 6 (8) , e70359
Open AccessTheory‐Guided Low‐Speed Centrifugation for High‐Purity Boron Nitride Nanotubes
Boron nitride nanotubes (BNNTs) are promising building blocks for next‐generation technologies, yet synthesis‐derived impurities and structural damage from conventional purification methods (e.g., harsh acid treatments, high‐speed centrifugation) hinder their practical applications. Here, we report a theory‐guided low‐speed centrifugation strategy for high‐purity BNNT enrichment without detectable structural damage. Leveraging fundamental sedimentation principles, this approach capitalizes on the distinct sedimentation contrast between compact impurities and high‐aspect‐ratio BNNTs. This mechanism enables highly selective separation, where impurities sediment rapidly while BNNTs remain suspended. Comprehensive experimental validations confirm that estimated BNNT purity approaching ∼95% is achievable, providing a favorable purity–recovery balance while preserving nanotube morphology and dispersibility under the tested conditions. The strategy exhibits versatility across tested surfactant systems in environmentally benign aqueous media, eliminating the need for strong acids or organic solvents while maintaining compatibility with ionic and nonionic stabilizers. Importantly, the purified BNNT dispersions retain their capacity for Onsager‐type anisotropic assembly to form uniformly aligned architectures during subsequent gravity filtration. This offers direct opportunities for advanced anisotropic applications, including thermal management, mechanical reinforcement, and directional transport. By unifying sedimentation theory with practical processing, this work establishes low‐speed centrifugation as a viable and sustainable strategy for high‐aspect‐ratio one‐dimensional nanomaterials.
- Open Access
- 25 February 2026
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 6 (3) , 339-347
Efficient and Stable Ligand-Exchange Process Using Perovskite Nanocrystals Synthesized from a Liquid Crystalline Antisolvent
Ligand exchange of perovskite nanocrystals (PNCs) is an essential process for optoelectronics applications, but it often causes structural instability and degradation of PNCs. In this work, we demonstrate that PNCs synthesized via ligand-assisted reprecipitation (LARP) using a liquid crystalline (LC) antisolvent, referred to as LC-LARP, enable a significantly more efficient and stable ligand-exchange process compared with those prepared by conventional LARP using toluene (T-LARP). After ligand exchange, PNCs from the LC-LARP (LC-PNCs) exhibit a dramatic increase in photoluminescence quantum yield (PLQY) from 29% to 80%, whereas PNCs from T-LARP (T-PNCs) show negligible improvement. Furthermore, LC-PNCs show exceptional stability under ligand-exchange reactions, retaining over 50% PLQY even at high ligand concentrations that trigger the complete decomposition of T-PNCs. This efficient and stable ligand exchange is attributed to superior ligand passivation and a low density of surface defects in LC-PNCs. Our approach is versatile and generalizable across diverse ligands and perovskite compositions. Finally, we demonstrate the practical utility of this method by designing LC-PNC-based light-emitting diodes (LEDs), which achieve a maximum external quantum efficiency (8.2%), significantly surpassing that of T-PNC-based LEDs (0.5%).
- 25 February 2026
- Published by American Chemical Society (ACS) in ACS Nanoscience Au
- Vol. 6 (3) , 339-347
Open AccessEfficient and Stable Ligand-Exchange Process Using Perovskite Nanocrystals Synthesized from a Liquid Crystalline Antisolvent
Ligand exchange of perovskite nanocrystals (PNCs) is an essential process for optoelectronics applications, but it often causes structural instability and degradation of PNCs. In this work, we demonstrate that PNCs synthesized via ligand-assisted reprecipitation (LARP) using a liquid crystalline (LC) antisolvent, referred to as LC-LARP, enable a significantly more efficient and stable ligand-exchange process compared with those prepared by conventional LARP using toluene (T-LARP). After ligand exchange, PNCs from the LC-LARP (LC-PNCs) exhibit a dramatic increase in photoluminescence quantum yield (PLQY) from 29% to 80%, whereas PNCs from T-LARP (T-PNCs) show negligible improvement. Furthermore, LC-PNCs show exceptional stability under ligand-exchange reactions, retaining over 50% PLQY even at high ligand concentrations that trigger the complete decomposition of T-PNCs. This efficient and stable ligand exchange is attributed to superior ligand passivation and a low density of surface defects in LC-PNCs. Our approach is versatile and generalizable across diverse ligands and perovskite compositions. Finally, we demonstrate the practical utility of this method by designing LC-PNC-based light-emitting diodes (LEDs), which achieve a maximum external quantum efficiency (8.2%), significantly surpassing that of T-PNC-based LEDs (0.5%).
- 24 January 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (11)
Design of Highly Selective and Sensitive Optical Sensor for Arsenic(III) Based on the Orientational Coupling Between L‐Cysteine and Liquid Crystals
Water pollution by toxic arsenic compounds, As(III), has emerged as a global problem, because prolonged exposure causes serious health issues. Accordingly, it is critical to monitor As(III) in drinking water and food, but conventional techniques still require complex and costly instruments that are not affordable in third‐world countries where As(III) contamination is significant. To resolve this social issue, simple and generalizable principles for the design of As(III) sensors are proposed by integrating the selective binding of L‐cysteine (L‐cys) with As(III) into the unique ability of liquid crystals (LCs) to transduce stimuli into macroscopic optical signals. We revealed significant orientational coupling of L‐cys with LCs that can be modulated by the selective binding of L‐cys with As(III) at the LC‐aqueous interface. When decorated with both L‐cys and surfactants, the LC‐aqueous interface is subjected to competition between the L‐cys‐imposed tangential (bright state) and surfactant‐imposed homeotropic (dark state) anchoring of LCs. Consequently, the competitive intermolecular interactions offers the basis for a highly stable and versatile LC material that can selectively detect As(III) in water and also quantify its concentration from trace to high levels (1 ppb – 4 ppm) via distinct optical outputs within 2 min.
- 24 January 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (11)
Design of Highly Selective and Sensitive Optical Sensor for Arsenic(III) Based on the Orientational Coupling Between L‐Cysteine and Liquid Crystals
Water pollution by toxic arsenic compounds, As(III), has emerged as a global problem, because prolonged exposure causes serious health issues. Accordingly, it is critical to monitor As(III) in drinking water and food, but conventional techniques still require complex and costly instruments that are not affordable in third‐world countries where As(III) contamination is significant. To resolve this social issue, simple and generalizable principles for the design of As(III) sensors are proposed by integrating the selective binding of L‐cysteine (L‐cys) with As(III) into the unique ability of liquid crystals (LCs) to transduce stimuli into macroscopic optical signals. We revealed significant orientational coupling of L‐cys with LCs that can be modulated by the selective binding of L‐cys with As(III) at the LC‐aqueous interface. When decorated with both L‐cys and surfactants, the LC‐aqueous interface is subjected to competition between the L‐cys‐imposed tangential (bright state) and surfactant‐imposed homeotropic (dark state) anchoring of LCs. Consequently, the competitive intermolecular interactions offers the basis for a highly stable and versatile LC material that can selectively detect As(III) in water and also quantify its concentration from trace to high levels (1 ppb – 4 ppm) via distinct optical outputs within 2 min.
- Open Access
- 2 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1177-1189
Controlled Synthesis of Perovskite Nanocrystals at Room Temperature by Liquid Crystalline Templates
Perovskite nanocrystals (PNCs) are promising active materials because of their outstanding optoelectronic properties, which are finely tunable via size and shape. However, previous synthetic methods such as hot-injection and ligand-assisted reprecipitation require a high synthesis temperature or provide limited access to homogeneous PNCs, leading to the present lack of commercial value and real-world applications of PNCs. Here, we report a room-temperature approach to synthesize PNCs within a liquid crystalline antisolvent, enabling access to PNCs with a precisely defined size and shape and with reduced surface defects. We demonstrate that elastic strains and long-range molecular ordering of the liquid crystals play a key role in not only regulating the growth of PNCs but also promoting high surface passivation of PNCs with ligands. The approach is a simple, rapid, and room-temperature process, yet it enables access to highly homogeneous PNCs on a mass scale with substantially reduced surface defect states leading to significantly enhanced optoelectronic features. Our results provide a versatile and generalizable strategy to be broadly compatible with a range of nanomaterials and other synthetic methods such as ligand exchange and microfluidic processes.
- 2 January 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (1) , 1177-1189
Open AccessControlled Synthesis of Perovskite Nanocrystals at Room Temperature by Liquid Crystalline Templates
Perovskite nanocrystals (PNCs) are promising active materials because of their outstanding optoelectronic properties, which are finely tunable via size and shape. However, previous synthetic methods such as hot-injection and ligand-assisted reprecipitation require a high synthesis temperature or provide limited access to homogeneous PNCs, leading to the present lack of commercial value and real-world applications of PNCs. Here, we report a room-temperature approach to synthesize PNCs within a liquid crystalline antisolvent, enabling access to PNCs with a precisely defined size and shape and with reduced surface defects. We demonstrate that elastic strains and long-range molecular ordering of the liquid crystals play a key role in not only regulating the growth of PNCs but also promoting high surface passivation of PNCs with ligands. The approach is a simple, rapid, and room-temperature process, yet it enables access to highly homogeneous PNCs on a mass scale with substantially reduced surface defect states leading to significantly enhanced optoelectronic features. Our results provide a versatile and generalizable strategy to be broadly compatible with a range of nanomaterials and other synthetic methods such as ligand exchange and microfluidic processes.
- Open Access
- 15 March 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (24) , e2311785
Dynamic Hyperspectral Holography Enabled by Inverse‐Designed Metasurfaces with Oblique Helicoidal Cholesterics
Metasurfaces are flat arrays of nanostructures that allow exquisite control of phase and amplitude of incident light. Although metasurfaces offer new active element for both fundamental science and applications, the challenge still remains to overcome their low information capacity and passive nature. Here, by integrating an inverse‐designed‐metasurface with oblique helicoidal cholesteric liquid crystal (ChOH), simultaneous spatial and spectral tunable metasurfaces with a high information capacity for dynamic hyperspectral holography, are demonstrated. The inverse design facilitates a single‐phase map encoding of ten independent holographic images at different wavelengths. ChOH provides precise spectral modulation with narrow bandwidth and wide tunable regime in response to programmed stimuli, thus enabling dynamic switching of the multicolor holography. The results provide simple and generalizable principles for the rational design of interactive metasurfaces that will find numerous applications, including security platform.
- 15 March 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (24) , e2311785
Open AccessDynamic Hyperspectral Holography Enabled by Inverse‐Designed Metasurfaces with Oblique Helicoidal Cholesterics
Metasurfaces are flat arrays of nanostructures that allow exquisite control of phase and amplitude of incident light. Although metasurfaces offer new active element for both fundamental science and applications, the challenge still remains to overcome their low information capacity and passive nature. Here, by integrating an inverse‐designed‐metasurface with oblique helicoidal cholesteric liquid crystal (ChOH), simultaneous spatial and spectral tunable metasurfaces with a high information capacity for dynamic hyperspectral holography, are demonstrated. The inverse design facilitates a single‐phase map encoding of ten independent holographic images at different wavelengths. ChOH provides precise spectral modulation with narrow bandwidth and wide tunable regime in response to programmed stimuli, thus enabling dynamic switching of the multicolor holography. The results provide simple and generalizable principles for the rational design of interactive metasurfaces that will find numerous applications, including security platform.