Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Malavika Arun has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Physio‐Chemical, Thermal Degradation and Calorimetric Properties of Two Commercially Available Proton‐Exchange Membranes

    by Malavika Arun, Sarbjit Giddey, Paul Joseph, Dattatray S. Dhawale

    Elucidation of the relevant properties of commercially available polymeric electrolyte membranes (PEMs) is crucial for designing better and more efficient variants to be used in electrochemical devices. Therefore, in the present study, the physico‐chemical, thermal, and calorimetric properties of two commercially available PEMs—Nafion and Aquivion— were evaluated. Their structural and morphological features were primarily examined using Fourier‐transform infrared (FT‐IR) spectroscopy and scanning electron microscopy with energy‐dispersive provision (SEM/EDS). The thermal and calorimetric parameters were also studied by employing a combination of thermogravimetric (TGA) and differential scanning calorimetric (DSC) and pyrolysis combustion flow calorimetric (PCFC) tests. The thermograms obtained through the TGA runs were further utilized to obtain the Arrhenius parameters using proprietary software and the standard Flynn‐Wall‐Ozawa (FWO) method. Furthermore, the wettability characteristics of the membranes were assessed through contact angle measurements and water sorption tests. The results revealed that both membranes exhibited similar characteristics despite the differences in the lengths of their side chains and the extent of functionalization, the latter obtained through SEM/EDS. Given that perfluorinated membranes are being phased out due to environmental concerns, the findings from this study have already provided insights that led to the development of some novel membranes based on non‐fluorinated polyolefins, with promising attributes.

  • Open Access

    Experimental and numerical investigation of burning characteristics of Australian pine trees for wildfire modelling

    by Siddharth Gupta, Mohamed Sharaf, Malavika Arun, Maurice Guerrierri, Khalid Moinuddin


  • Open Access

    The Thermo-Phase Change Reactivity of Textile and Cardboard Fibres in Varied Concrete Composites

    by Robert Haigh, Malindu Sandanayake, Paul Joseph, Malavika Arun, Ehsan Yaghoubi, Zora Vrcelj, Soorya Sasi

    The building and construction industry heavily relies on the use of concrete and cementitious composites due to their exceptional attributes, including strength and durability. However, the extensive use of these materials has led to significant environmental challenges, including resource depletion, carbon emissions, and waste accumulation. In response to these challenges, recent advancements in fibre cementitious composites have shown promise in mitigating these detrimental effects. The integration of waste materials to supplement manufactured fibres represents a promising development in reinforced concrete composite materials. Waste materials like textiles and cardboard are emerging as potential fibre supplements in cementitious composites. While these materials have primarily been investigated for their mechanical characteristics, understanding their thermal properties when applied in construction materials is equally crucial. Incorporating fibres within composite designs often requires matrix modification to reduce degradation and enhance fibre longevity. This study aims to investigate the thermo-phase change properties of both textile and cardboard fibres within varied concrete matrices. Additive materials offer a range of advantages and challenges when used in composite materials, with additional complexities arising when incorporating fibre materials. Understanding the thermal reactivity of these materials is crucial for optimizing their application in construction. This study demonstrates the potential of waste fibres used with gypsum, metakaolin, and silica fume as matrix modifiers in concrete. This research provides valuable insights for future studies to explore specific material combinations and investigate complex fire testing methods, ultimately contributing to the development of sustainable construction materials.


  • Open Access

    The Effects of Nitrogen‐Containing Monomers on the Thermal Degradation and Combustion Attributes of Polystyrenes Chemically Modified With Phosphonate Groups

    by Aloshy Baby, Svetlana Tretsiakova‐McNally, Paul Joseph, Jianping Zhang, Malavika Arun

    In the present study, polystyrene (PS) is chemically modified with diethyl(acryloyloxymethyl)phosphonate (DEAMP) and an N‐containing monomer, selected from different classes of compounds, via a ter‐polymerization route; thus, exploring possible P–N synergistic effects on fire retardance of the base polymer. The successful incorporation of P and N monomeric units is confirmed by Fourier Transform Infrared (FT‐IR), 1H and 31P Nuclear Magnetic Resonance (NMR) spectroscopies. The thermal degradation and combustion attributes of modified polymeric materials are measured using standard techniques, including Thermo‐Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), “bomb” calorimetry, and Pyrolysis Combustion Flow Calorimetry (PCFC). The thermal and combustion studies demonstrate that the thermal stability and combustion characteristics of styrenic polymers are significantly altered by the presence of even nominal amounts of P‐ and N‐containing groups, and in certain cases, synergistic interactions of these groups are also evident. For instance, as revealed by TGA, the extent of char formation, under the oxidative atmosphere, in the prepared ter‐polymers, is enhanced by 16–44%, when compared to the unmodified PS. The heat release rates and heat release capacities of ter‐polymers, measured using the PCFC technique, are reduced by 18–50%, in comparison to the same parameters obtained for the unmodified counterpart.


  • Open Access

    An Overview of Some Reactive Routes to Flame-Retardant Fibre-Forming Polymers: Polypropylene and Polyacrylonitrile

    by Svetlana Tretsiakova-McNally, Malavika Arun, Maurice Guerrieri, Paul Joseph

    The thermal degradation and flammability characteristics of some common fibre-forming polymers, such as polypropylene (PP) and polyacrylonitrile (PAN), are described in this review paper. The flame retardance of these polymers is principally affected by reactive routes that were primarily developed in our laboratories. The modifying groups that are incorporated into polymeric chains include phosphorus- or phosphorus/nitrogen-containing moieties in different chemical environments. The degradation characteristics and extent of flame retardance were mainly evaluated using routine thermal and calorimetric techniques. Elements of flame-retardant mechanisms occurring in the condensed and vapour phases were also identified. Furthermore, we also explored the effects of molecularly dispersed β-cyclodextrin, including its physical mixtures, on the thermal and combustion characteristics of PAN. Given that both types of polymers are often used in the form of fibres, and that the aspect ratio of fibrous materials is relatively high, even nominal enhancements in their fire retardance are highly welcomed. Hence, the preliminary results of our research on chemically modified PAN incorporating molecularly dispersed β-cyclodextrin are encouraging in terms of their enhanced fire retardance, and hence this field warrants further exploration.


  • Open Access

    Separation and Characterization of Plastic Waste Packaging Contaminated with Food Residues

    by Svetlana Tretsiakova-McNally, Helen Lubarsky, Ashlene Vennard, Paul Cairns, Charlie Farrell, Paul Joseph, Malavika Arun, Ian Harvey, John Harrison, Ali Nadjai

    In this paper, we present the development of a novel processing technology to tackle hard-to-recycle plastic packaging waste contaminated with food residues. The proof-of-concept (POC) technology can effectively separate food residual amounts from plastic waste materials to a level acceptable for further re-use or recycling of the plastic packaging. To assess this technology, we have conducted spectroscopic, thermal, and calorimetric characterizations of the obtained fractions, such as cleaned mixed plastics (CMP), food waste with mixed plastics (FWMP), and a mixture of microplastics (MP). The analyses were carried out with the aid of Fourier-Transform Infrared spectroscopy (FT-IR), Thermo-Gravimetric Analysis (TGA), Microcone Combustion Calorimetry (MCC), and ‘bomb’ calorimetry. The highest ratio of CMP to FWMP and the lowest amount of MP were obtained utilizing 700 rpm blade rotational speed and 15 s residence time of contaminated plastics in a cutting mill chamber. The plastics were freed from food contamination by 93–97%, which highlights a strong potential of the POC as a solution for ‘dry-cleaning’ of similar wastes on a larger scale. The main components of the CMP fraction were low-density polyethylene (LDPE), polypropylene (PP), and polyethylene terephthalate (PET), which are recyclable plastics. The knowledge and understanding of thermal degradation behaviours and calorimetric attributes of separated fractions, determined in this study, are essential in informing the industrial players using pyrolysis as a technique for recycling plastics.


  • Open Access

    Gaseous- and Condensed-Phase Activities of Some Reactive P- and N-Containing Fire Retardants in Polystyrenes

    by Svetlana Tretsiakova-McNally, Aloshy Baby, Paul Joseph, Doris Pospiech, Eileen Schierz, Albena Lederer, Malavika Arun, Gaëlle Fontaine

    Polystyrene (PS) was modified by covalently binding P-, P-N- and/or N- containing fire-retardant moieties through co- or ter-polymerization reactions of styrene with diethyl(acryloyloxymethyl)phosphonate (DEAMP), diethyl-p-vinylbenzyl phosphonate (DEpVBP), acrylic acid-2-[(diethoxyphosphoryl)methylamino]ethyl ester (ADEPMAE) and maleimide (MI). In the present study, the condensed-phase and the gaseous-phase activities of the abovementioned fire retardants within the prepared co- and ter-polymers were evaluated for the first time. Pyrolysis–Gas Chromatography/Mass Spectrometry was employed to identify the volatile products formed during the thermal decomposition of the modified polymers. Benzaldehyde, α-methylstyrene, acetophenone, triethyl phosphate and styrene (monomer, dimer and trimer) were detected in the gaseous phase following the thermal cracking of fire-retardant groups and through main chain scissions. In the case of PS modified with ADEPMAE, the evolution of pyrolysis gases was suppressed by possible inhibitory actions of triethyl phosphate in the gaseous phase. The reactive modification of PS by simultaneously incorporating P- (DEAMP or DEpVBP) and N- (MI) monomeric units, in the chains of ter-polymers, resulted in a predominantly condensed-phase mode of action owing to synergistic P and N interactions. The solid-state 31P NMR spectroscopy, Scanning Electron Microscopy/Energy Dispersive Spectroscopy, Inductively-Coupled Plasma/Optical Emission Spectroscopy and X-ray Photoelectron Spectroscopy of char residues, obtained from ter-polymers, confirmed the retention of the phosphorus species in their structures.


  • Open Access

    Thermal and Calorimetric Investigations of Some Phosphorus-Modified Chain Growth Polymers 2: Polystyrene

    by Malavika Arun, Stephen Bigger, Maurice Guerrieri, Paul Joseph, Svetlana Tretsiakova-McNally

    In this paper, we report on the thermal degradation behaviours and combustion attributes of some polymers based on polystyrene (PSt). Here, both additive and reactive strategies were employed, through the bulk polymerization route, where the modifying groups incorporated P-atom in various chemical environments. These included oxidation states of III or V, and the loading of phosphorus was kept at ca. 2 wt.% in all cases. The characterization techniques that were employed for the recovered products included spectroscopic, thermal, and calorimetric. It was found that the presence of different modifying groups influenced the degradation characteristics of the base polymer, and also exerted varying degrees of combustion inhibition. In all cases, the modification of the base matrix resulted in a noticeable degree of fire retardance as compared to that of the virgin material. Therefore, some of the modifications presented have the potential to be explored on a commercial scale.


  • Open Access

    Thermal and Calorimetric Investigations of Some Phosphorus-Modified Chain Growth Polymers 1: Polymethyl Methacrylate

    by Malavika Arun, Stephen Bigger, Maurice Guerrieri, Paul Joseph, Svetlana Tretsiakova-McNally

    The thermal and calorimetric characterizations of polymethyl methacrylate-based polymers are reported in this paper. The modifying groups incorporated the phosphorus atom in various chemical environments, including oxidation states of III, or V. Both additive and reactive strategies were employed, where the loading of phosphorus was kept at 2 wt% in all cases. The plaques, obtained through the bulk polymerization route, were subjected to a variety of spectroscopic, thermal and combustion techniques. The results showed that the different modifying groups exerted varying nature, degrees and modes of combustion behaviors, which also included in some cases an additive, and even an antagonistic effect. In the case of covalently-bound phosphonate groups, early cracking of the pendent ester moieties was shown to produce phosphoric acid species, which in turn can act in the condensed phase. For the additives, such as phosphine and phosphine oxide, limited vapor-phase inhibition can be assumed to be operative.


  • Open Access

    Passive Fire Protection of Taeda pine Wood by Using Starch-Based Surface Coatings

    by Svetlana Tretsiakova-McNally, Adeline Le Douarin, Paul Joseph, Malavika Arun

    The present paper reports the preliminary results relating to the development, subsequent application, and testing of environmentally benign starch-based formulations for passive fire protection of wood substrates. This study evaluated the effectiveness of starch colloid coatings applied onto the wood surface with a view to improving its performance when exposed to the external heat flux (35 kW/m2) during cone calorimetric tests. The formulations were prepared from aqueous colloid solutions of either starch alone, or in combination with inorganic salts, such as: sodium carbonate, Na2CO3, potassium carbonate, K2CO3, and diammonium hydrogen phosphate, (NH4)2HPO4. The fire performance of Taeda pine wood samples, where their top surfaces were treated with these formulations, was compared with the control sample. The thermal and combustion characteristics of the tested samples were determined with the aid of thermo-gravimetric analysis (TGA), bomb and cone calorimetric techniques, and a steady state tube furnace coupled to an FT-IR spectrometer. A significant boost of fire protection was observed when starch formulations with added inorganic salts were applied onto the wood surfaces, compared with the control sample. For example, the presence of K2CO3 in starch colloid solutions resulted in a notable delay of the ignition and exhibited a reduction in the heat release parameters in comparison with the untreated wood substrate.