Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


İbRahim Şen has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • From farm waste to high-performance plastics: Revolutionary acrylonitrile-butadiene-styrene (ABS) composites through direct injection

    by İbRahim Şen

    This study investigates the development of novel biocomposites by blending powdered acrylonitrile-butadiene-styrene (ABS) with olive stone (OS) filler via an efficient direct injection method. A comprehensive evaluation of the resulting materials was conducted to ascertain their thermal, mechanical, structural, and visual properties. Thermal analyses indicated strong stability; thermogravimetric analysis (TGA) showed only minor fluctuations (1°C to 3°C) in the maximum decomposition temperature, while differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) revealed no substantial changes in glass transition or melting temperatures. From a mechanical standpoint, the integration of OS filler into the material resulted in a notable enhancement in several key mechanical properties, including the storage modulus, Young’s modulus, flexural modulus, and tensile strength at break. However, structural evaluations using Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) confirmed that the matrix-filler interaction was purely physical, lacking chemical bonding. Consequently, scanning electron microscopy (SEM) revealed distinct voids and weak interfacial adhesion between the ABS matrix and OS filler, which accounted for a general decline in other mechanical performance parameters. Furthermore, visual and physical assessments demonstrated that elevated OS concentrations systematically augmented the composite’s overall density and darkened its color. While direct injection has been demonstrated to be a viable manufacturing approach for these biocomposites, the findings of this study highlight the necessity of future research focused on incorporating surface treatments or compatibilizers to enhance interfacial adhesion and fully realize the material’s mechanical potential.


  • THERMAL CHARACTERIZATION OF WALNUT SHELL AND KAOLIN ENHANCED POLYPROPYLENE COMPOSITES

    by İbRahim Şen, Sibel Tuna

    Composite materials for natural-based organic and inorganic fillers have become an innovative class of materials that have attracted attention in recent years. Improving the properties of Polypropylene (PP), which is one of the most widely used thermoplastics due to its advanced mechanical properties, chemical resistance and processability advantages, and reducing the usage rates and environmental impacts of petroleum-based polymers have led to the increasing use of natural-based fillers. In this study, the applicability of walnut shell (W), an agricultural waste, together with kaolin (K), a natural clay mineral, in PP matrix was investigated and the synergistic effects of natural and inorganic fillers were characterised by thermal analyses. Differential scanning calorimetry (DSC) results revealed that kaolin acted as an effective nucleating agent, increasing the crystallization temperature of PP from 115.7 °C to 122.2 °C and enhancing the degree of crystallinity from 48.2% to 53.7%, while the melting temperature remained nearly constant (165–167 °C) for all compositions. Thermogravimetric analysis (TGA) and thermomechanical test results showed that hybrid W/K filled PP composites exhibited improved thermal and dimensional stability, with the highest thermal onset temperature reaching 426.1 °C and reduced coefficient of linear thermal expansion (CLTE) values down to 86.6 µm/m·K, indicating synergistic effects of filler hybridization on thermal resistance and viscoelastic performance. It was observed that the combination of two natural-based fillers with PP can improve the thermal properties of the composites and also has the potential to reduce the negative impact on the environment.

  • Open Access

    Investigations of the Nucleating Agent Effects on Polypropylene of Pumice from Three Distinct Areas in Türkiye

    by Yasin Özdemir, Metehan Atagur, İbrahim Şen, Kutlay Sever

    This study investigates the mechanical and thermal properties of polypropylene (PP) composites incorporating pumice, a naturally occurring porous volcanic rock with high SiO2 content, sourced from three regions in Türkiye (Nevşehir, Alaçatı, and Kütahya). Pumice was processed to particle sizes below 10 microns to maximize nucleating effectiveness, and composites were fabricated by melt compounding. The distinct mineralogical composition, porosity, and surface chemistry of the pumice samples enabled systematic evaluation of how regional variations influence crystallization and mechanical performance. A multi-analytical characterization approach, including thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and standardized mechanical tests (tensile, flexural, and impact), was applied. Results revealed that Alaçatı pumice at 0.1 wt% increased the impact strength of PP by about 11%, while maintaining stiffness. This demonstrates that pumice, unlike conventional fillers, can simultaneously enhance toughness and rigidity. Thermal analysis confirmed improved stability, with higher degradation onset and maximum decomposition temperatures observed in pumice-filled PP. DSC results indicated that certain pumice loadings promoted nucleation and increased crystallinity, while excessive amounts disrupted chain packing. SEM examinations confirmed uniform dispersion at low loadings, with agglomeration at higher levels reducing impact resistance. This work provides the first systematic demonstration of pumice powders as effective nucleating agents in PP, combining regional mineralogical diversity with measurable performance benefits. These findings indicate that pumice can serve as a sustainable, low-cost alternative to conventional nucleating agents, with potential applications in polymer components requiring improved toughness and thermal stability.

  • Development of Carboxymethyl Cellulose and Graphene Filled Polypropylene Composites: Hybridization of Natural and Nanofillers

    by Sibel Tuna, İbRahim Şen

    Polymeric composites have become important in materials engineering thanks to their advanced properties and potential for versatile applications. In this study, the effects of reinforcing polypropylene (PP), a widely used thermoplastic with carboxymethyl cellulose (CMC), a natural additive, and graphene (Gr), a nanoadditive on its performance were investigated. While CMC offers advantages such as lightness and biodegradability, the goal of Gr is to achieve high mechanical and thermal performance in the composite. Using maleic anhydride as a compatibilizing agent improves the compatibility between the fillers and the matrix. Physical, structural, thermal, mechanical and morphological characterization of the injection‐moulded composite structures revealed slight increases in density and hardness values, as well as enhanced crystallization behavior, thermal stability, and degree of crystallinity. The tensile and flexural properties generally improved with increasing filler content and microstructural analysis confirmed the good distribution and high interaction of the fillers in the matrix. Overall, hybrid structures incorporating CMC/Gr fillers in a PP matrix were identified as a promising alternative for multifunctional and sustainable engineering applications.

  • Open Access

    Production and characterization of agricultural waste natural fiber-filled polylactic acid composites

    by İbRahim Şen, Kutlay Sever

    The objective of this study was to obtain new composites containing polylactic acid (PLA) with artichoke stem (AP) at concentrations of 1%, 3%, 5%, 7%, and 10% by weight using a twin-screw extruder. The composites were created using biodegradable PLA and postharvest agricultural waste AP. The study aimed to determine whether these composites could be used. Thermal, mechanical, and morphological characterization of AP and these composites were performed. The findings of the study revealed that AP particles exhibited chemical and physical properties similar to other natural fibers. When incorporated into composites, these materials showed increased density and elastic modulus. However, decreases in tensile strength, elongation at break, and unnotched Izod impact were observed. Dynamic mechanical analysis revealed that PLA exhibited higher storage modulus (E′) values compared to AP-filled composites at 40 °C. In the differential scanning calorimetry analysis, while there was a slight fluctuation in the glass transition temperature (T g) in the AP-filled composites, significant increases in the crystallinity degree (X c) were observed when looking at the values of PLA. The results of the thermal gravimetric analysis showed that both T max and T s values of the composite decreased as the AP content in PLA increased. Furthermore, SEM imaging of the composites containing P5AP clearly demonstrated the presence and distribution of AP particles within the PLA matrix. Graphical abstract


  • Open Access

    Characterization of Olive Seed Powder Incorporated Low Density Polyethylene Composites

    by Sibel Tuna, İbRahim Şen

    Global warming, increasing production and consumption rates, environmental concerns have revealed the need for some innovative material studies, and studies on the use of polymeric composites prepared with natural based fillers have become widespread in order to increase environmental awareness and ensure sustainable production. Composite materials prepared by using easily accessible, affordable, lightweight, high-strength plant based fillers can be used in many areas. In this study, composites of low density polyethylene (LDPE), which is one of the most widely used thermoplastics, were prepared by injection moulding process using the waste seeds of olives (OS), which have an important place in Turkey's agriculture and economy, and the density, hardness (Shore D), spectroscopic (Fourier transform infrared (FTIR) spectroscopy), morphological (Scanning electron microscopy (SEM)), mechanical, thermal (Differential Scanning Calorimetry (DSC), Heat Deflection Temperature (HDT) and Vicat softening temperature) analyses of OS filled LDPE composites were performed. As a result of the study, an increase in hardness and elastic modulus values of OS filled LDPE composites was observed, while no noticeable decrease in thermal properties was seen.


  • EFFECT OF SiO₂ ADDITION ON MECHANICAL AND THERMAL PROPERTIES OF BORIC ACID CROSSLINKED POLYVINYL ALCOHOL (PVA) FİLMS

    by İbRahim Şen

    In this study, the thermal, mechanical and chemical changes of water-soluble polyvinyl alcohol (PVA) were investigated both by crosslinking with boric acid (BA) and by adding SiO2 at different ratios into crosslinked PVA. Tensile strength (TS), percentage elongation at maximum tensile strength (ETS) and elastic modulus (EM) parameters were investigated for mechanical properties. The findings revealed that crosslinking with BA led to an enhancement in TS and EM values, accompanied by a reduction in ETS. Conversely, the incorporation of SiO2 as a filler material resulted in a decline in all parameters. To elucidate the thermal properties, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA) were conducted. The results indicated that crosslinking with BA significantly improved the thermal stability, while the addition of SiO2 did not yield substantial changes. According to the DSC analysis, both cross-linking with BA and the addition of SiO2 to cross-linked PVA resulted in regular increases in the glass transition temperature (Tg) of PVA films. Tg peaks were observed in the tan δ thermogram in the DMA analysis, and the increase in these peaks was found to be wavy.


  • Open Access

    Production And Characterization Of Electrical Conductive Polymeric Hybrid Composites Containing Organic And Inorganic Materials

    by Kutlay Sever, Hüseyin Yılmaz, Metehan Atagur, İbRahim Şen

    Polymer composites are becoming more and more involved in many industries such as aerospace, automotive, transportation and sports. As usage increases in the commercial market, the polymer industry provides materials to almost every area of technology and industry, allowing the production of materials or new materials to be produced and the development or orientation of new types of needs. In the last 10 years, the use of polymer composites has become the new materials needed in electronic technology. The aim of this study is to investigate the effects of polypropylene (PP) on mechanical and conductivity properties by using mica (M) as an inorganic filler and carbon nano tube (CNT) as an organic filler. Before hybrid composite materials were produced, polypropylene (PP) and M-PP composites were produced and composite with the best mechanical properties were selected. PP-M composites were produced by using a thermokincetic mixer with the addition of mica in 10%, 20%, and 30% weight ratios. Hybrid composites were manufactured using CNT addition into PP-20M with %1, %3, %5, and %7 weight ratios. Mechanical properties of the composite materials produced using tensile and bending tests and viscoelastic properties by dynamic mechanical analysis (DMA), thermal properties by differential scanning calorimeter (DSC) and thermogravimetric (TGA) analyses and morphological structures by scanning electron microscopy (SEM) were investigated