YZYuqiu Zhang

Yuqiu Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuqiu Zhang has a total of 8 co-authors. Here are the top co-authors by number of shared publications:

  • Minghu Yu

    School of Low-Altitude Equipment and Intelligent Control, Guangzhou Maritime University, Guangzhou, People’s Republic of China

    4 shared publications
  • Minghu Yu

    School of Low-Altitude Equipment and Intelligent Control, Guangzhou Maritime University, Guangzhou, China

    3 shared publications
  • Minghu Yu

    School of Low-Altitude Equipment and Intelligent Control, Guangzhou Maritime University, Guangzhou, China

    3 shared publications
  • Tianyu Fang

    School of Electric Power Engineering, South China University of Technology, Guangzhou, People’s Republic of China

    2 shared publications
  • Jiekun Lin

    School of Electric Power Engineering, South China University of Technology, Guangzhou, China

    1 shared publication
  • Jiekun Lin

    School of Electric Power Engineering, South China University of Technology, Guangzhou 510641, China

    1 shared publication

Latest Publications

  • Top Cited Papers
    Open Access

    Multi-objective optimization design of linear oscillating actuator based on hybrid surrogate model

    by Minghu Yu, Jiekun Lin, Yuqiu Zhang

    Thrust fluctuations, including electromagnetic and cogging forces, significantly limit the efficiency of linear oscillating actuators (LOAs) and hinder their ability to generate reciprocating driving forces and stroke ranges, presenting a complex multi-objective optimization challenge. This study introduces an innovative optimization strategy utilizing a hybrid surrogate model (HSM) in conjunction with an improved nondominated sorting genetic algorithm II (NSGA-II). The HSM integrates four complementary data-driven surrogate models through a heuristic weighting scheme based on the coefficient of determination, effectively capturing both nonlinear behaviors and local characteristics. This integration enhances the accuracy and robustness of motor performance predictions and facilitates the rapid generation of candidate solutions for optimal exploration within a broad design space. Furthermore, a modified NSGA-II improves the crowding degree model, thereby increasing the number of viable solutions in the target region. The proposed optimization strategy results in significant enhancements in average performance and a reduction in force fluctuations in LOAs, ultimately improving system controllability. Empirical validation through static and dynamic tests of the optimized prototype, coupled with finite element analysis, substantiates the efficacy of the HSM and the proposed optimization method. This research contributes a robust, data-driven framework for high-performance LOA design. The proposed strategy may offer insights for addressing similar complex multi-objective optimization problems in engineering.


  • Top Cited Papers

    Enhanced sensorless position measurement and control of linear oscillatory motors using novel fractional-order terminal sliding mode observers

    by Minghu Yu, Yuqiu Zhang, Tianyu Fang

    This study introduces a novel sensorless position measurement and control scheme for linear oscillatory motors (LOMs) in linear compressors, leveraging a high-order generalized integrator (HOGI) integrated with a fractional-order terminal sliding mode observer (FOTSMO). Traditional position estimation methods have shown limitations in accuracy due to direct current (DC) offsets and residual harmonics, leading to inefficiencies in maintaining optimal operational states. The proposed HOGI addresses DC component rejection while enhancing signal smoothness, effectively minimizing amplitude and phase distortions. The FOTSMO employs a fractional-order sliding surface to process voltage and current signals, significantly reducing highfrequency noise from back electromotive force. This synergistic approach yields high-fidelity position estimations crucial for precise control and improved tracking of resonant frequencies, validated through dynamic experiments. Results demonstrate the superior performance of the HOGI-equipped FOTSMO, showing enhanced convergence, noise reduction, and robustness under varying stroke conditions. The findings underscore the method's applicability to other precision-dependent systems, positioning it as an innovative solution within the fields of engineering and measurement technology.


  • Position estimation enhancement and robust resonant frequency tracking control strategy in linear oscillating machines

    by Yuqiu Zhang, Tianyu Fang, Minghu Yu

    Linear oscillating machines (LOMs) are increasingly used in measuring instruments, medical devices, refrigeration systems, and industrial automation due to their precise control over oscillation frequency and amplitude. Resonant frequency tracking control (RFTC), which is achieved by estimating position from voltage and current measurement signals, eliminates the need for position sensors and improve both reliability and efficiency. However, position estimation accuracy is often compromised by direct current (DC) interference and current distortion. To address these issues, an enhanced signal processing method and a stroke estimation control strategy are proposed for RFTC of LOMs. The third-order generalized integrator (TOGI) is developed to eliminate the DC bias in conventional integrator outputs and attenuate high-frequency harmonics, thereby achieving more precise position estimation. Additionally, a current inner-loop strategy based on finite control set double-vector model predictive current control is introduced to enhance both disturbance rejection and RFTC accuracy. Experimental results confirm that the method significantly improves signal extraction under DC interference, enhances position estimation from circuit measurements, and increases overall RFTC precision and system efficiency. Beyond LOMs, the TOGI-based processing technique offers strong immunity to signal interference and facilitates accurate information extraction in other motor drive systems.


  • Harmonic Localization Analysis of Radial Electromagnetic Force in Interior Permanent Magnet Synchronous Motors Influenced by Saliency Effect

    by Minghu Yu, Yuqiu Zhang, Tianyu Fang

    This study investigates the challenges posed by electromagnetic (EM) vibration noise in interior permanent magnet synchronous motors (IPMSMs), specifically focusing on the rotor saliency effect. Comprehensive harmonic localization models that incorporate the saliency effect have been developed to analyze magnetic flux density and radial EM force density (REMFD) in IPMSMs. An 8-pole, 12-slot spoke-type IPMSM serves as the primary model, exploring both temporal and spatial harmonic characteristics influenced by the saliency effect under no-load and load conditions through finite element quantitative analysis while tracing their origins to the magnetic field. A novel rapid layered traced optimization strategy for multiple objectives of further reducing REMFD under both no-load and load conditions while maintaining torque performance is proposed on the key rotor dimensions, based on the traceability of REMFD harmonics. Validation is conducted using multi-physics vibration noise prediction models and experimental measurements. The results indicate that reducing the saliency effect mitigates the harmonics of the main pole magnetic field under load, effectively reducing low-order REMFD and EM noise across various loading conditions. This study not only enhances the theoretical understanding of EM noise and vibration in IPMSMs but also offers a more straightforward optimization strategy for IPMSM design.


  • Source identification and hierarchical suppression of measured carrier frequency noise in variable frequency drive system

    by Minghu Yu, Yuqiu Zhang

    Vibration and noise signals have long been crucial for predicting motor performance and detecting faults. In high-performance variable-frequency permanent magnet synchronous motor (PMSM) drive systems, electromagnetic (EM) vibrations and noise arising from high-frequency current harmonics, especially around the carrier frequency, significantly adversely impact motor performance and the surrounding application environment. Furthermore, these disturbances can interfere with the operation of nearby precision electronic devices, resulting in measurement signal distortion. To address this issue, this paper presents a comprehensive analysis of carrier frequency radial EM force density (CFREMFD), which is the source of measured carrier frequency noise in PMSM. A detailed analytical model of CFREMFD is established, considering both carrier frequency current harmonics and saliency effects. The spatial-temporal characteristics of CFREMFD of a 10-pole 12-slot interior PMSM coupled with control system are investigated and predicted through the analytical model and multiple finite element analysis (FEA), revealing the dominant contributions from excitation magnetic field, fundamental and carrier frequency armature field interactions, with saliency effects superposing flux harmonic and introducing new components. Furthermore, a novel optimization framework that combines carrier frequency shifting FEA with hierarchical optimization is proposed to minimize CFREMFD by adjusting rotor dimensions and topology. Experimental validation demonstrates that the optimized design effectively suppresses high-frequency vibration and the measured carrier frequency noise is reduced 5.62 dBA from 27.79 dBA. Through comprehensive analysis and experimentation, it has been demonstrated that vibrations and noise near the carrier frequency are induced by CFREMFD, facilitating the prediction of trends in substantial high-frequency variations and amplitude fluctuations of vibration and noise signals. This research provides theoretical support and practical strategies for the rapid optimization of carrier frequency EM noise in variable frequency drive system, showcasing innovative methods to mitigate the negative impacts of carrier frequency current harmonics during motor design.


  • Open Access

    Analysis and Optimization Design of Moving Magnet Linear Oscillating Motors

    by Minghu Yu, Yuqiu Zhang, Jiekun Lin, Peng Zhang

    Permanent Magnet Linear Oscillating Motors (PMLOMs) are popular in micro-positioning systems, biomedical devices, and refrigeration compressors due to their simple structure, high efficiency, rapid response, and quiet operation. This paper proposes a method for the analysis and optimization of electromechanical systems that employs a moving magnet linear oscillating motor. A simplified magnetic circuit method model was built to derive an electromagnetic thrust formula, and the initial design parameters of the motor and the thrust at the equilibrium position were calculated. Subsequently, a finite element model was developed, and a multi-objective optimization method was applied to refine the key dimensions of the motor to enhance its thrust characteristics. Furthermore, an analysis of the resonant characteristics of the electromechanical coupled system was conducted to identify the optimal operating frequency for the optimization scheme. Finally, the experimental validation of the optimized design was performed on a prototype, with the measured data showing a general correlation with the trends observed in the simulation analysis results. The effectiveness of this system analysis method was validated through experimental data. The results demonstrate that the thrust at the initial position is linearly correlated with both the outer arc radius of the permanent magnet and its mechanical pole arc coefficient. Additionally, the axial length of the outer stator, the axial spacing between the two outer stators, and the axial length of the magnets serve as key influencing parameters for the thrust characteristics within the effective stroke range. Furthermore, when the motor operates at its mechanical resonance frequency, it can attain the maximum efficiency.


  • Open Access

    Performance Trade-Off Design Based on Electromagnetic Noise Reduction of Fractional-Slot Permanent Magnet Synchronous Motors

    by Minghu Yu, Yuqiu Zhang

    The electromagnetic (EM) vibration noise of fractional-slot permanent magnet synchronous motors (PMSMs) has become increasingly prominent. This paper initiates by deriving the spatial and frequency characteristics of radial EM force density (REMFD) and presents a general expression linking the key parameters of the lowest nonzero order REMFD with the stator auxiliary slots. The effectiveness of the formulas and traceability analysis is verified using finite element analysis of prototypes with various pole-slot combinations and numbers of auxiliary slots. The addition of auxiliary slots typically reduces torque ripple, but also affects the average torque and the REMFD. Consequently, a comprehensive analysis and trade-off designs of the 10-pole 12-slot motors with a eccentric arc rotor and a three-arc-segment rotor, are conducted, covering the total harmonic distortion (THD) of the air-gap flux density, main REMFD harmonics, cogging torque, average torque, torque ripple and process. Finally, the EM noise are validated through multi-physics FEA models of multiple optimization schemes. Experimental tests on both the original cogging torque optimization prototype and newly proposed comprehensive process and performance optimization prototype substantiated the validity and precision of the previous analyses. Additionally, it is demonstrated that the lowest non-zero order REMFD significantly contributes to EM noise at even multiples of the frequency but lacks 0 6kf components. Tangential forces are identified as the primary contributors to 0 6kf EM noise.


  • Harmonics Traceability and Suppression of Electromagnetic Noise in Fractional Slot Permanent Magnet Synchronous Motors

    by Minghu Yu, Yuqiu Zhang

    Fractional slot permanent magnet synchronous motors (PMSMs) have rich air-gap magnetic field harmonic components and large vibration noise. A fast traceability method is targeted for identification and suppression of the electromagnetic (EM) noise. First, the generalized traceability expression of the main air-gap flux density harmonic sources corresponding to EM noise at a certain frequency are deduced inversely. In addition, for a 10-pole, 12-slot fractional slot PMSM, a multi-physics field noise prediction model is constructed to confirm the correctness of the analytical formula. The measured noise data of the prototype presents an overall agreement with the noise prediction data. Finally, the noise frequency band of the prototype to be improved is selected, and the related magnetic field harmonics are quickly traced. After the introduction of the three-segment arc rotor and the multi-objective optimization process for output performance improvement and noise reduction, both the noise prediction model and the measured data of the newly proposed prototype exhibit a reduction in noise across each primary frequency band, and providing larger and more stable torque as well.