XSXiaowu Shu

Xiaowu Shu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Xiaowu Shu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Calibration-excitation design for fiber-optic gyroscope bias compensation under sparse temperature sensing

    by Zhouxiang Hu, Wang Lei, Bi Ran, Xiaowu Shu

    Temperature-induced nonreciprocity remains a primary limitation on the bias stability (BS) of fiber-optic gyroscopes, especially when the distributed internal thermal field is observed through only one or a few temperature sensors. Under such sparse sensing, the same measured gyro temperature can correspond to different internal thermal gradients, and hence to different bias values, depending on the preceding startup or environmental temperature trajectory. As a result, instantaneous temperature is a non-unique descriptor of the bias-relevant thermal state. This study formulates FOG thermal compensation as the learning of a history-dependent empirical compensation mapping from sparse measurements, and develops a source-balanced complementary thermal-excitation calibration (CTEC) strategy that combines startup and variable-temperature records. The two record types are interpreted as distinct thermal-history trajectories for this shared mapping: startup transients emphasize self-heating and internal redistribution, whereas temperature cycles emphasize boundary-driven thermal evolution. A compact gated recurrent unit realizes the shared thermal-history mapping common to both sources. On independent records, CTEC reduces the BS metric from 0.397 to 0.124   ∘   h − 1 for startup tests and from 2.072 to 0.468   ∘   h − 1 for held-out variable-temperature cycles. Matched-exposure controls show larger gains from combined-source calibration than from repeated single-source training. For the investigated stationary FOG and prescribed thermal protocols, the results identify calibration-excitation design as an effective means of improving FOG bias compensation under sparse temperature sensing.

  • Study on the Actual Mean Wavelength of the Interferometric Fiber Optic Gyroscope

    by Xilong Guo, Yuhao Ma, Kan Chen, Lei Wang, Xiaowu Shu

    Scale factor stability is a critical parameter determining the precision of the interferometric fiber optic gyroscope (IFOG), with current advanced high-precision IFOGs requiring scale factor stability at the level of several parts per million (ppm). This study investigates the relationship between the IFOG scale factor and the mean wavelength (MWL) of light, focusing on the mean wavelength in the wavenumber domain (k-MWL) and the mean wavelength in the wavelength domain (λ-MWL) to identify the key indicator and core mechanism determining the optical scale factor stability of the IFOG. The results demonstrate that, compared to the λ-MWL, the k-MWL exhibits a more direct and fundamental mathematical and physical relationship with the IFOG interference fringes. The k-MWL can be considered the actual MWL that reflects the properties of the interference fringes and determines the IFOG scale factor. Additionally, a quantitative discrepancy exists between the k-MWL and λ-MWL, with variations ranging from tens of picometers to several nanometers across different spectral bands and bandwidths of light sources. Even under the same light source, spectral perturbations can induce variations in this discrepancy at the picometer level. This magnitude of discrepancy variation suggests that using the λ-MWL as the metric for evaluating the IFOG's MWL may misguide the reference standard and optimization direction for the high-precision IFOG scale factor, potentially hindering the achievement of ppm level stability. This study innovatively investigates the physical properties of interference fringes, combining clear mathematical derivations to establish k-MWL as the actual mean wavelength determining the optical scale factor of the IFOG from the fundamental physical perspective of the interference process. It reveals the intrinsic relationship between high-precision IFOG scale factor stability and the k-domain MWL, optimizes the optical model of the IFOG, effectively reduces scale factor error terms, and establishes a more accurate reference standard for optimizing scale factor stability in the high-precision IFOG.

  • High-Performance 2 × 2 3 dB Power Splitter on Thin-Film Lithium Niobate via Numerical-Assisted Inverse Engineering

    by Fei Huang, Ran Bi, Xuan She, Zhiwei Zheng, Xiwei Shen, Meng Chen, Kan Chen, Lei Wang, Xiaowu Shu

    In this paper, we propose and experimentally demonstrate a high-performance 3 dB power splitter based on thin-film lithium niobate (TFLN). The waveguide widths and separations are designed using invariant-based inverse engineering. A mathematical model is developed to characterize the bandwidth of the splitter, enabling evaluation of splitting ratio (SR) error without additional simulations. The results show that the proposed splitter exhibit a highly balanced SR of 0.475–0.525 and a low excess loss (EL) below 0.2 dB over the entire S-,C-,L- and U-bands (1400–1700 nm). The minimum waveguide gap is 400 nm, which significantly reduces fabrication difficulty and can be reliably achieved using high-resolution lithography, thereby facilitating large-scale manufacturing of TFLN devices. Unbalanced Mach–Zehnder interferometers (MZIs) and cascaded 3 dB couplers were fabricated for experimental validation. The measurement results confirm that the power splitter achieves an SR of 0.48–0.52 and an EL below 0.4 dB across the wavelength range of 1520 nm to 1630 nm.

  • Study of Pyroelectric Suppression Method for LiNbO₃ E-O Modulator

    by Peiji Sun, Xuan She, Lei Zhang, Haoyi Han, Ran Bi, Heliang Shen, Fei Huang, Lei Wang, Xiaowu Shu

    The pyroelectric effect in ${\mathbf {LiNbO}}_{\mathbf {3}}$ electro-optic (E-O) modulators leads to bias instability in temperature variation environments. In this study, the pyroelectric model of X-cut ${\mathbf {LiNbO}}_{\mathbf {3}}$ modulator is established for the first time. Simulations of pyroelectric responses under a fixed rate of 2 K/min are conducted, testing two suppression methods: grounding the $\boldsymbol {\pm Z}$ polarization planes and adding surface grounded electrodes, with the latter showing a decrease in the pyroelectric voltage drop by 29.75%. The temperature experiment on the fabricated X-cut ${\mathbf {LiNbO}}_{\mathbf {3}}$ modulator with foldback form reveals that short-circuiting the electrodes could eliminate the pyroelectric pulse discharge phenomenon. Further coating electrically conductive adhesive(ECA) to act as grounded electrodes could suppress pyroelectric secondary oscillations, which shows a reduction of 44.96%. The proposed pyroelectric suppression methods provide a potential improvement strategy for enhancing bias stability in phase-sensitive devices based on ${\mathbf {LiNbO}}_{\mathbf {3}}$ materials.


  • Analysis of polarization error of sensors based on michelson interferometer

    by Fei Huang, Peiji Sun, Wen Fan, Heliang Shen, Xiwei Shen, Kan Chen, Lei Wang, Ran Bi, Xuan She, Xiaowu Shu


  • IFOG Output Fluctuation Caused by Electrostriction Effect and Its Solution

    by Qiaohan Wang, Ran Bi, Xiaowu Shu

    The multifunctional optical integrated circuit (MIOC) is a key component of interferometric fiber optic gyroscope (IFOG), and the phase error in its signal modulation process will inevitably bring output signal error to the IFOG. This article theoretically analyzes and simulates the modulation and output of gyroscopes from the perspective of energy loss caused by MIOC resonance. This article establishes an IFOG testing system and it is found that the fluctuation frequency of the gyroscope output is consistent with the resonance frequency of the MIOC, which proves the correlation between the two. This article also achieves the effect of reducing the output fluctuation of the gyroscope by adjusting the frequency composition of the modulation signal to avoid the resonance frequency of MIOC, which has strong engineering practicality.

  • Ring Resonator of Hollow-Core Photonic Crystal Fiber Based on Spatial Coupling Scheme

    by Wen Fan, Xuan She, Heliang Shen, Fei Huang, Ran Bi, Kan Chen, Xingfan Chen, Xiaowu Shu

    In this paper, we proposed a hollow-core photonic crystal fiber (HCPCF) ring resonator based on a spatial coupling method, and the component is only 22×30×6mm 3 . When using a 7-core photonic crystal fiber with a mode field diameter of 10um, a ring resonator with the measured finesse of 18 can be built, indicating that the coupling loss is as low as 0.41dB. Compact and low-loss closed resonator is accomplished using a highly integrated free space silicon optical bench manufactured by deep silicon etching and tiny optical lens package technology, which promotes the practicality of the HCPCF gyro. In addition, two important factors affecting the spatial optical coupling efficiency, the lens type and the fiber mode field size, are investigated in this paper. The obtained results are instructive for all spatial optical coupling systems.


  • Open Access

    A Hollow-Core Photonic-Crystal Fiber-Optic Gyroscope Based on a Parallel Double-Ring Resonator

    by Heliang Shen, Kan Chen, Kang Zou, Yijia Gong, Ran Bi, Xiaowu Shu

    A novel system structure of resonant fiber optical gyroscope using a parallel double hollow-core photonic crystal fiber ring resonator is proposed, which employs the double closed loop and reciprocal modulation–demodulation technique to solve the problem of the length mismatch between rings. This structure can suppress the residual amplitude modulation noise and laser frequency noise, essentially eliminating the influence of the Rayleigh backscattering noise and dramatically reduce the Kerr-effect-induced drift by three orders of magnitude. Thanks to its excellent noise suppression effect, the sensitivity of this novel system can approach the shot-noise-limited theoretical value of 8.94 × 10−7 rad/s assuming the length of the fiber ring resonator is 10 m.


  • Optimization of Reciprocal Modulation Parameters in Resonant Fiber Optic Gyro

    by Kang Zou, Lei Wang, Kan Chen, Ran Bi, Xiaowu Shu

    The resonant fiber optic gyro (RFOG) based on reciprocal modulation-demodulation technique is introduced and the influence of high modulation frequency on resonance and demodulation output is analyzed. The expression of backscattering output in resonant cavity is deduced and the experimental device is built to measure the backscattering coefficient. The demodulation model considering backscattering noise is established under reciprocal sinusoidal modulation, and the optimal modulation parameters are obtained by simulation. Finally, the RFOG system is set up. The results show that the detection sensitivity is improved by 19% with the optimal modulation parameters and the system bias stability improves from 0.067/s to 0.023/s.