Changhong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Changhong Wang has a total of 136 co-authors. Here are the top co-authors by number of shared publications:
- Chunxian Guo
Suzhou University of Science and Technology
15 shared publications - Zhen Wang
Key Laboratory of Research on Utilization of Si‐Zr‐Ti Resources of Hainan Province School of Materials Science and Engineering Hainan University Haikou China
9 shared publications Changming Li
Institute of Renewable Energy on Demand, School of Materials Science and Engineering, Suzhou University of Science and Technology, 215009, P.R. China
8 shared publicationsJingsha Li
School of Materials Science and Engineering, Suzhou University of Science and Technology, Suzhou 215011, PR China
8 shared publicationsYingyu Chen
School of Materials Science and Engineering Key Laboratory of Research on Utilization of Si-Zr-Ti Resources of Hainan Province Hainan University 570228 Haikou China
8 shared publicationsFeng Du
School of Materials Science and Engineering Suzhou University of Science and Technology 215011 Suzhou P. R. China
7 shared publications
Latest Publications
- 29 September 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (76) , 19009-19012
Valence-engineered CuO x via anion doping to boost nitrate-to-ammonia conversion
Phosphorus anion doping uniquely enriches Cu(I) sites in CuO x nanowires and weakens *H adsorption, suppressing the HER and enabling 96.2% NH 3 Faradaic efficiency for nitrate-to-ammonia conversion in a neutral electrolyte.
- 29 September 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (76) , 19009-19012
Valence-engineered CuO x via anion doping to boost nitrate-to-ammonia conversion
Phosphorus anion doping uniquely enriches Cu(I) sites in CuO x nanowires and weakens *H adsorption, suppressing the HER and enabling 96.2% NH 3 Faradaic efficiency for nitrate-to-ammonia conversion in a neutral electrolyte.
- 19 December 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (1) , 819-827
Green Hydrogen Production Using Direct Current/Direct Current Connection between Photovoltaic and Alkaline Electrolyzer
- 19 December 2025
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 40 (1) , 819-827
Green Hydrogen Production Using Direct Current/Direct Current Connection between Photovoltaic and Alkaline Electrolyzer
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (6) , 1950-1953
Ultrafast liquid Joule heating to in situ fabricate and stabilize NiFe-LDH for enhanced oxygen evolution electrocatalysis
The NiFe-LDH-JH electrode features hierarchical porosity, high-density active sites, enhanced conductivity, and strong interfacial bonding, achieving exceptional OER activity.
- 8 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (6) , 1950-1953
Ultrafast liquid Joule heating to in situ fabricate and stabilize NiFe-LDH for enhanced oxygen evolution electrocatalysis
The NiFe-LDH-JH electrode features hierarchical porosity, high-density active sites, enhanced conductivity, and strong interfacial bonding, achieving exceptional OER activity.
- Open Access
- 1 December 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (12)
Enhanced high-energy-density WO 3 -based electrochromic batteries via acid-modified graphite foil cathode
In conventional tungsten oxide-based electrochromic batteries (ECBs), tungsten oxide acts as the cathode and Zn foil as the anode, but low redox potential leads to a limited discharge plateau, low areal capacitance, and power density, restricting practical applications. In this study, a novel WO3||AGF ECB was developed using acid-modified graphite foil (AGF) as the cathode, WO3 as the anode, and a hybrid Zn2+/Al3+ electrolyte. The AGF offers advantages such as high ion storage capacity, fast kinetics, and a high electrode potential, ensuring a high discharge voltage and capacity for the WO3||AGF ECB. The prepared WO3||AGF ECB not only exhibits excellent electrochromic performance but also demonstrates superior energy storage capabilities. At a charge/discharge current density of 0.5 mA cm−2, the WO3||AGF ECB achieves a stable discharge capacity of 315.6 mAh m−2, which is 7.8 times higher than that of the traditional Zn||WO3 ECB. Moreover, the rapid ion diffusion kinetics of the AGF ensure the cycling stability of the device at high voltages, maintaining 94.4% optical modulation after 8000 coloring/bleaching cycles. This work provides a novel approach by designing more compatible electrode material systems to achieve ECBs with high energy and power densities.
- 1 December 2025
- Published by Tsinghua University Press in Nano Research
- Vol. 18 (12)
Open AccessEnhanced high-energy-density WO 3 -based electrochromic batteries via acid-modified graphite foil cathode
In conventional tungsten oxide-based electrochromic batteries (ECBs), tungsten oxide acts as the cathode and Zn foil as the anode, but low redox potential leads to a limited discharge plateau, low areal capacitance, and power density, restricting practical applications. In this study, a novel WO3||AGF ECB was developed using acid-modified graphite foil (AGF) as the cathode, WO3 as the anode, and a hybrid Zn2+/Al3+ electrolyte. The AGF offers advantages such as high ion storage capacity, fast kinetics, and a high electrode potential, ensuring a high discharge voltage and capacity for the WO3||AGF ECB. The prepared WO3||AGF ECB not only exhibits excellent electrochromic performance but also demonstrates superior energy storage capabilities. At a charge/discharge current density of 0.5 mA cm−2, the WO3||AGF ECB achieves a stable discharge capacity of 315.6 mAh m−2, which is 7.8 times higher than that of the traditional Zn||WO3 ECB. Moreover, the rapid ion diffusion kinetics of the AGF ensure the cycling stability of the device at high voltages, maintaining 94.4% optical modulation after 8000 coloring/bleaching cycles. This work provides a novel approach by designing more compatible electrode material systems to achieve ECBs with high energy and power densities.
- 26 November 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (1)
Tristate Electrochromic Device Enabling Transparent–Black–Yellow Switching via Metal/Nonmetal Synergistic Deposition
Reversible metal electrodeposition has attracted extensive attention for its ability to achieve color–neutral switching between transparent and black states; however, its color expression remains relatively limited, making it difficult to meet the demand for versatile color modulation. This work proposes a hybrid deposition strategy that combines metal and nonmetal redox processes in a single electrochromic device. The metal component involves codeposition of Cu 2+ and Bi 3+ ions for high‐contrast black‐state formation, while the nonmetal component utilizes reversible Br − /Br 3 − conversion. Br 3 − is further stabilized via complexation with 1‐methyl‐3‐propylimidazolium ion (MPI + ) to form yellow MPIBr 3 , enabling a transparent‐to‐yellow transition. These two processes are synergistically driven and precisely controlled by applied voltages, allowing reversible switching among transparent, black, and yellow within a single device. The device exhibits a high optical modulation of up to 60.8% in the yellow state, and the transmittance can be modulated below 1% in the black state, demonstrating excellent color neutrality and privacy protection. Moreover, after 24 h of resting, the transmittance increases by only 1.3%, indicating outstanding open‐circuit stability. This multicolor dynamic switching capability not only fulfills the functional requirements of smart windows for privacy and light regulation but also offers enriched color expression of aesthetic value.
- 26 November 2025
- Published by Wiley in Physica Status Solidi (RRL) – Rapid Research Letters
- Vol. 20 (1)
Tristate Electrochromic Device Enabling Transparent–Black–Yellow Switching via Metal/Nonmetal Synergistic Deposition
Reversible metal electrodeposition has attracted extensive attention for its ability to achieve color–neutral switching between transparent and black states; however, its color expression remains relatively limited, making it difficult to meet the demand for versatile color modulation. This work proposes a hybrid deposition strategy that combines metal and nonmetal redox processes in a single electrochromic device. The metal component involves codeposition of Cu 2+ and Bi 3+ ions for high‐contrast black‐state formation, while the nonmetal component utilizes reversible Br − /Br 3 − conversion. Br 3 − is further stabilized via complexation with 1‐methyl‐3‐propylimidazolium ion (MPI + ) to form yellow MPIBr 3 , enabling a transparent‐to‐yellow transition. These two processes are synergistically driven and precisely controlled by applied voltages, allowing reversible switching among transparent, black, and yellow within a single device. The device exhibits a high optical modulation of up to 60.8% in the yellow state, and the transmittance can be modulated below 1% in the black state, demonstrating excellent color neutrality and privacy protection. Moreover, after 24 h of resting, the transmittance increases by only 1.3%, indicating outstanding open‐circuit stability. This multicolor dynamic switching capability not only fulfills the functional requirements of smart windows for privacy and light regulation but also offers enriched color expression of aesthetic value.
- 31 January 2025
- Published by Elsevier in Chinese Chemical Letters
- Vol. 37 (4)
Temperature-tolerant electrochromic devices enabled by LiCl water-in-salt electrolyte with excellent performance
- 31 January 2025
- Published by Elsevier in Chinese Chemical Letters
- Vol. 37 (4)
Temperature-tolerant electrochromic devices enabled by LiCl water-in-salt electrolyte with excellent performance
- Open Access
- 16 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Electrochromism via reversible electrodeposition of solid iodine
Electrochromic materials were discovered in the 1960s when scientists observed reversible changes between the light and dark states in WO3 thin films under different voltages. Since then, researchers have identified various electrochromic material systems, including transition metal oxides, polymer materials, and small molecules. However, the electrochromic phenomenon has rarely been observed in non-metallic elemental substances. Herein, we propose the development of non-metallic iodine electrodeposition-based electrochromic dynamic windows using a water-in-salt electrolyte containing iodine ions. The unique electrolyte environment and solvation structure of the water-in-salt electrolyte suppress the dissolution and shuttle effect of iodine, thereby achieving a different reaction pathway compared to traditional electrolytes. This pathway involves a reversible solid-liquid transition between solid iodine and solvated iodide ions. The iodine electrodeposition-based electrochromic dynamic window demonstrates a high optical contrast of 76.0% with near colour neutrality and excellent cycling stability. A practical 400 cm2 complementary dynamic window is fabricated to demonstrate good electrochromic performance, including high optical contrast, a near colour-neutral opaque state, fast response time, uniform modulation, and polarity-switchable functionality.
- 16 January 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-10
Open AccessElectrochromism via reversible electrodeposition of solid iodine
Electrochromic materials were discovered in the 1960s when scientists observed reversible changes between the light and dark states in WO3 thin films under different voltages. Since then, researchers have identified various electrochromic material systems, including transition metal oxides, polymer materials, and small molecules. However, the electrochromic phenomenon has rarely been observed in non-metallic elemental substances. Herein, we propose the development of non-metallic iodine electrodeposition-based electrochromic dynamic windows using a water-in-salt electrolyte containing iodine ions. The unique electrolyte environment and solvation structure of the water-in-salt electrolyte suppress the dissolution and shuttle effect of iodine, thereby achieving a different reaction pathway compared to traditional electrolytes. This pathway involves a reversible solid-liquid transition between solid iodine and solvated iodide ions. The iodine electrodeposition-based electrochromic dynamic window demonstrates a high optical contrast of 76.0% with near colour neutrality and excellent cycling stability. A practical 400 cm2 complementary dynamic window is fabricated to demonstrate good electrochromic performance, including high optical contrast, a near colour-neutral opaque state, fast response time, uniform modulation, and polarity-switchable functionality.
- 19 December 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (7) , 8897-8903
Enhanced dual-band electrochromism in mesoporous WO3·H2O with high optical modulation and stability
- 19 December 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (7) , 8897-8903
Enhanced dual-band electrochromism in mesoporous WO3·H2O with high optical modulation and stability
- 13 December 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (51) , 16360-16367
Robust MnO2–WO3 Complementary Electrochromic Device Enabled by Reversible Electrodeposition of MnO2
Reversible electrodeposition and dissolution of manganese oxide (MnO2) represent an emerging electrochromic system. However, challenges such as "dead MnO2" formation, limited optical modulation across a narrow wavelength range, and difficulties in scaling up have significantly hindered the development of MnO2 reversible electrodeposition-based electrochromic windows. In this work, we introduced Fe2+/Fe3+ mediator ions into the electrolyte to suppress the Jahn-Teller effect, thereby preventing the formation of "dead MnO2" and achieving stable and reversible MnO2 deposition/dissolution. Furthermore, by employing WO3 as the counter electrode, we developed a complementary electrochromic device based on ion insertion and metal oxide deposition. This complementary system exhibits color neutrality in the colored state and high optical contrast across the entire visible spectrum, with an average optical modulation of 67.3%, excellent cycling stability (85.0% retention after 3000 cycles), and capability to switch uniformly over areas as large as 100 cm2.
- 13 December 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (51) , 16360-16367
Robust MnO2–WO3 Complementary Electrochromic Device Enabled by Reversible Electrodeposition of MnO2
Reversible electrodeposition and dissolution of manganese oxide (MnO2) represent an emerging electrochromic system. However, challenges such as "dead MnO2" formation, limited optical modulation across a narrow wavelength range, and difficulties in scaling up have significantly hindered the development of MnO2 reversible electrodeposition-based electrochromic windows. In this work, we introduced Fe2+/Fe3+ mediator ions into the electrolyte to suppress the Jahn-Teller effect, thereby preventing the formation of "dead MnO2" and achieving stable and reversible MnO2 deposition/dissolution. Furthermore, by employing WO3 as the counter electrode, we developed a complementary electrochromic device based on ion insertion and metal oxide deposition. This complementary system exhibits color neutrality in the colored state and high optical contrast across the entire visible spectrum, with an average optical modulation of 67.3%, excellent cycling stability (85.0% retention after 3000 cycles), and capability to switch uniformly over areas as large as 100 cm2.
- 6 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (3) , e202415259
Bimetallic Cu 11 Ag 3 Nanotips for Ultrahigh Yield Rate of Nitrate‐to‐Ammonium
Electrochemical reduction of nitrate to ammonia (NRA) offers a sustainable approach for NH 3 production and NO 3 − removal but suffers from low NH 3 yield rate (−1 cm −2 ). We present bimetallic Cu 11 Ag 3 nanotips with tailored local environment, which achieve an ultrahigh NH 3 yield rate of 2.36 mmol h −1 cm −2 at a low applied potential of −0.33 V vs. RHE, a high Faradaic efficiency (FE) of 98.8 %, and long‐term operation stability at 1800 mg‐N L −1 NO 3 − , outperforming most of the recently reported catalysts. At a NO 3 − concentration as low as 15 mg‐N L −1 , it still delivers a high FE of 86.9 % and an NH 3 selectivity of 93.8 %. Finite‐element method and density functional theory calculations reveal that the Cu 11 Ag 3 exhibits reduced adsorption energy barrier of *N intermediates, favorable water dissociation for *H generation and high energy barrier for H 2 formation, while its tip‐enhanced enrichment promoting NO 3 − accumulation.
- 6 November 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (3) , e202415259
Bimetallic Cu 11 Ag 3 Nanotips for Ultrahigh Yield Rate of Nitrate‐to‐Ammonium
Electrochemical reduction of nitrate to ammonia (NRA) offers a sustainable approach for NH 3 production and NO 3 − removal but suffers from low NH 3 yield rate (−1 cm −2 ). We present bimetallic Cu 11 Ag 3 nanotips with tailored local environment, which achieve an ultrahigh NH 3 yield rate of 2.36 mmol h −1 cm −2 at a low applied potential of −0.33 V vs. RHE, a high Faradaic efficiency (FE) of 98.8 %, and long‐term operation stability at 1800 mg‐N L −1 NO 3 − , outperforming most of the recently reported catalysts. At a NO 3 − concentration as low as 15 mg‐N L −1 , it still delivers a high FE of 86.9 % and an NH 3 selectivity of 93.8 %. Finite‐element method and density functional theory calculations reveal that the Cu 11 Ag 3 exhibits reduced adsorption energy barrier of *N intermediates, favorable water dissociation for *H generation and high energy barrier for H 2 formation, while its tip‐enhanced enrichment promoting NO 3 − accumulation.