Barbara Wawrzaszek
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Barbara Wawrzaszek has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Barbara Charmas
Department of Chromatography, Institute of Chemical Sciences, Faculty of Chemistry, Maria Curie-Sklodowska University, Maria Curie-Sklodowska Sq. 3, 20-031 Lublin, Poland
2 shared publications - Aleksander Učakar
Jožef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia
1 shared publication - Anamarija Zore
Faculty of Health Sciences, University of Ljubljana, 1000 Ljubljana, Slovenia
1 shared publication - Andrijana Sever Škapin
Slovenian National Building and Civil Engineering Institute, Dimičeva ulica 12, SI-1000 Ljubljana, Slovenia
1 shared publication - Anže Abram
Jozef Stefan Institute, 1000 Ljubljana, SLOVENIA
1 shared publication - Atiđa Selmani
Pharmaceutical Technology and Biopharmacy, Institute of Pharmaceutical Sciences, University of Graz, Universitätsplatz 1, 8010 Graz, Austria
1 shared publication
Latest Publications
- 21 June 2026
- Published by Wiley in Chemphyschem
- Vol. 27 (12) , e70424
Quasi‐Isothermal Thermogravimetric Insight Into Energetic Heterogeneity of Ni‐Modified Biocarbons
Quasi‐isothermal thermogravimetric analysis (Q‐TG) was used to characterize the structure and energy heterogeneity of water layers adsorbed on the surface of nickel‐modified biocarbons. The investigated materials were obtained from biomass in the pyrolysis process carried out at temperatures of 500°C and 800°C, with the nickel contents of 5% and 10% by weight. The combination of Q‐TG, low‐temperature nitrogen adsorption, and FTIR, XRD, and XPS analyses enabled a comprehensive assessment of the effect of carbonization temperature and the presence of the metallic phase on porosity, surface chemistry, and water/biocarbon interactions. Biocarbons obtained at 500°C proved to possess a dominant microporosity and hydrophilic surface character, while carbonized materials at 800°C exhibit a micro‐/mesoporous structure, greater ordering of graphene domains, and increased hydrophobicity. The analysis of the relationship between and dG/dM derivatives revealed the presence of strong adsorption centers at a low degree of hydration and a shift in the capillary condensation threshold towards larger numbers of water monolayers with the increasing pyrolysis temperature and nickel content. The obtained results confirm the applicability of the Q‐TG method for the determination of energetic heterogeneity of biocarbons and indicate the possibility of controlling their hydrophilic/hydrophobic properties for environmental applications.
- 21 June 2026
- Published by Wiley in Chemphyschem
- Vol. 27 (12) , e70424
Quasi‐Isothermal Thermogravimetric Insight Into Energetic Heterogeneity of Ni‐Modified Biocarbons
Quasi‐isothermal thermogravimetric analysis (Q‐TG) was used to characterize the structure and energy heterogeneity of water layers adsorbed on the surface of nickel‐modified biocarbons. The investigated materials were obtained from biomass in the pyrolysis process carried out at temperatures of 500°C and 800°C, with the nickel contents of 5% and 10% by weight. The combination of Q‐TG, low‐temperature nitrogen adsorption, and FTIR, XRD, and XPS analyses enabled a comprehensive assessment of the effect of carbonization temperature and the presence of the metallic phase on porosity, surface chemistry, and water/biocarbon interactions. Biocarbons obtained at 500°C proved to possess a dominant microporosity and hydrophilic surface character, while carbonized materials at 800°C exhibit a micro‐/mesoporous structure, greater ordering of graphene domains, and increased hydrophobicity. The analysis of the relationship between and dG/dM derivatives revealed the presence of strong adsorption centers at a low degree of hydration and a shift in the capillary condensation threshold towards larger numbers of water monolayers with the increasing pyrolysis temperature and nickel content. The obtained results confirm the applicability of the Q‐TG method for the determination of energetic heterogeneity of biocarbons and indicate the possibility of controlling their hydrophilic/hydrophobic properties for environmental applications.
- Open Access
Impact of Mechanochemical Activation (MChA) on Characteristics and Dye Adsorption Behavior of Sawdust-Based Biocarbons
The increase in environmental pollution due to the development of industry and human activity has resulted in intensive development of research on the possibility of its purification. A very effective method is the pollutants’ adsorption from the air and water environment. For adsorption to be effective, materials with a specific structure and a well-developed surface decorated with numerous functionalities, e.g., biocarbons (BC), are necessary. An effective method of activating biocarbons is mechanochemical milling, an environmentally friendly procedure. This paper describes the possibility of using mechanochemical activation (MChA) of non-porous biocarbons to develop surface and porosity for their use in processes of pollutant adsorption. BC was characterized based on N2 adsorption, thermogravimetry (TGA), SEM/EDS imaging, Fourier (ATR-FTIR) and Raman spectroscopies, as well as titration using the Boehm method and determination of zeta potential. The adsorption capacity of BC for methylene blue (MB) was studied. It was proven that the solvent-free MChA made it possible to obtain microporous biocarbons, causing an intensive increase in the surface area and pore volume and the generation of oxygen functionalities. The biocarbons had predominantly acidic (mainly carboxylic) or basic functionalities and exhibited an amorphous structure. BC proved to be effective in adsorbing MB from aqueous solutions.
Open AccessImpact of Mechanochemical Activation (MChA) on Characteristics and Dye Adsorption Behavior of Sawdust-Based Biocarbons
The increase in environmental pollution due to the development of industry and human activity has resulted in intensive development of research on the possibility of its purification. A very effective method is the pollutants’ adsorption from the air and water environment. For adsorption to be effective, materials with a specific structure and a well-developed surface decorated with numerous functionalities, e.g., biocarbons (BC), are necessary. An effective method of activating biocarbons is mechanochemical milling, an environmentally friendly procedure. This paper describes the possibility of using mechanochemical activation (MChA) of non-porous biocarbons to develop surface and porosity for their use in processes of pollutant adsorption. BC was characterized based on N2 adsorption, thermogravimetry (TGA), SEM/EDS imaging, Fourier (ATR-FTIR) and Raman spectroscopies, as well as titration using the Boehm method and determination of zeta potential. The adsorption capacity of BC for methylene blue (MB) was studied. It was proven that the solvent-free MChA made it possible to obtain microporous biocarbons, causing an intensive increase in the surface area and pore volume and the generation of oxygen functionalities. The biocarbons had predominantly acidic (mainly carboxylic) or basic functionalities and exhibited an amorphous structure. BC proved to be effective in adsorbing MB from aqueous solutions.
- Open Access
- 25 March 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (7) , 570
Poly(Allylamine Hydrochloride) and ZnO Nanohybrid Coating for the Development of Hydrophobic, Antibacterial, and Biocompatible Textiles
In healthcare facilities, infections caused by Staphylococcus aureus (S. aureus) from textile materials are a cause for concern, and nanomaterials are one of the solutions; however, their impact on safety and biocompatibility with the human body must not be neglected. This study aimed to develop a novel multilayer coating with poly(allylamine hydrochloride) (PAH) and immobilized ZnO nanoparticles (ZnO NPs) to make efficient antibacterial and biocompatible cotton, polyester, and nylon textiles. For this purpose, the coated textiles were characterized with profilometry, contact angles, and electrokinetic analyzer measurements. The ZnO NPs on the textiles were analyzed by scanning electron microscopy and inductively coupled plasma mass spectrometry. The antibacterial tests were conducted with S. aureus and biocompatibility with immortalized human keratinocyte cells. The results demonstrated successful PAH/ZnO coating formation on the textiles, demonstrating weak hydrophobic properties. Furthermore, PAH multilayers caused complete ZnO NP immobilization on the coated textiles. All coated textiles showed strong growth inhibition (2–3-log reduction) in planktonic and adhered S. aureus cells. The bacterial viability was reduced by more than 99%. Cotton, due to its better ZnO NP adherence, demonstrated a slightly higher antibacterial performance than polyester and nylon. The coating procedure enables the binding of ZnO NPs in an amount (−2) that, after complete dissolution, is significantly below the concentration causing cytotoxicity (10 µg mL−1).
- 25 March 2024
- Published by MDPI AG in Nanomaterials
- Vol. 14 (7) , 570
Open AccessPoly(Allylamine Hydrochloride) and ZnO Nanohybrid Coating for the Development of Hydrophobic, Antibacterial, and Biocompatible Textiles
In healthcare facilities, infections caused by Staphylococcus aureus (S. aureus) from textile materials are a cause for concern, and nanomaterials are one of the solutions; however, their impact on safety and biocompatibility with the human body must not be neglected. This study aimed to develop a novel multilayer coating with poly(allylamine hydrochloride) (PAH) and immobilized ZnO nanoparticles (ZnO NPs) to make efficient antibacterial and biocompatible cotton, polyester, and nylon textiles. For this purpose, the coated textiles were characterized with profilometry, contact angles, and electrokinetic analyzer measurements. The ZnO NPs on the textiles were analyzed by scanning electron microscopy and inductively coupled plasma mass spectrometry. The antibacterial tests were conducted with S. aureus and biocompatibility with immortalized human keratinocyte cells. The results demonstrated successful PAH/ZnO coating formation on the textiles, demonstrating weak hydrophobic properties. Furthermore, PAH multilayers caused complete ZnO NP immobilization on the coated textiles. All coated textiles showed strong growth inhibition (2–3-log reduction) in planktonic and adhered S. aureus cells. The bacterial viability was reduced by more than 99%. Cotton, due to its better ZnO NP adherence, demonstrated a slightly higher antibacterial performance than polyester and nylon. The coating procedure enables the binding of ZnO NPs in an amount (−2) that, after complete dissolution, is significantly below the concentration causing cytotoxicity (10 µg mL−1).