Fengyun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fengyun Li has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Rumao Tao
China Academy of Engineering Physics
7 shared publications Chun Zhang
5 shared publications- Chun Zhang
Laser Fusion Research Center, China Academy of Engineering Physics
4 shared publications Qiuhui Chu
4 shared publicationsHonghuan Lin
3 shared publications- Honghuan Lin
Laser Fusion Research Center, Chinese Academy of Engineering Physics, Mianyang 621900, China
3 shared publications
Latest Publications
- 6 November 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 25
Impact of bending diameter on TMI threshold in confined-doped fibers
Confined-doped fiber design, which enables selective gain amplification of specific modes, is a key technique for raising the TMI threshold and has attracted considerable research interest in recent years.The confined-doped fiber design, which enables selective gain amplification of specific laser modes, is a key technique for raising the transverse mode instability (TMI) threshold and has become a research hotspot in recent years. In this paper, the TMI characteristics under different bending diameters are investigated based on an (18/30/400) μm confined-doped fiber. The results show that fiber bending increases the loss of high order modes (HOMs) for mode selection, while simultaneously inducing mode distortion, which enlarges the filling area of HOMs and enhances their gain. Under the combined influence of bending loss and mode distortion, as the bending diameter increases, the TMI threshold first decreases and then increases. Specifically, when the bending diameter increases from 17 cm to 26 cm, the TMI threshold drops; then, as the bending diameter further increases to 38 cm, the TMI threshold rises. This study reveals for the first time the non-monotonic influence of bending diameter on the TMI threshold in confined-doped fibers, providing a basis for improving the laser performance of such fibers.
- 6 November 2026
- Published by SPIE-Intl Soc Optical Eng
- p. 25
Impact of bending diameter on TMI threshold in confined-doped fibers
Confined-doped fiber design, which enables selective gain amplification of specific modes, is a key technique for raising the TMI threshold and has attracted considerable research interest in recent years.The confined-doped fiber design, which enables selective gain amplification of specific laser modes, is a key technique for raising the transverse mode instability (TMI) threshold and has become a research hotspot in recent years. In this paper, the TMI characteristics under different bending diameters are investigated based on an (18/30/400) μm confined-doped fiber. The results show that fiber bending increases the loss of high order modes (HOMs) for mode selection, while simultaneously inducing mode distortion, which enlarges the filling area of HOMs and enhances their gain. Under the combined influence of bending loss and mode distortion, as the bending diameter increases, the TMI threshold first decreases and then increases. Specifically, when the bending diameter increases from 17 cm to 26 cm, the TMI threshold drops; then, as the bending diameter further increases to 38 cm, the TMI threshold rises. This study reveals for the first time the non-monotonic influence of bending diameter on the TMI threshold in confined-doped fibers, providing a basis for improving the laser performance of such fibers.
- 22 September 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 204
Thermally induced coupling dynamics in distributed side-coupled cladding-pumped fiber amplifiers toward 20 kW operation
- 22 September 2026
- Published by Elsevier in Optics & Laser Technology
- Vol. 204
Thermally induced coupling dynamics in distributed side-coupled cladding-pumped fiber amplifiers toward 20 kW operation
- 10 March 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (6) , 1566-1569
311.7-W high-beam-quality single-frequency fiber laser based on heavy boron doping for SBS suppression
In this Letter, Yb-doped Al 2 O 3 –P 2 O 5 –B 2 O 3 –SiO 2 fibers are first studied with different B 2 O 3 doping levels to suppress stimulated Brillouin scattering (SBS). It is revealed that by heavy B 2 O 3 doping, the Brillouin gain spectrum broadens, and the gain coefficient decreases substantially, which leads to a significant SBS suppression effect. For Yb-doped fibers (YDFs) of 6.43 mole% B 2 O 3 , the Brillouin gain coefficient suppression ratio improves by more than 5.0 dB, and the SBS threshold of single-frequency (SF) laser emission enhances by 4.87 times, compared to YDF of weak B 2 O 3 doping. Based on the optimal B 2 O 3 -doped YDF with a step-index 20-μm-diameter core, high-beam-quality single-frequency laser emission has been achieved with 311.7 W output power. The laser linewidth is measured to be 2.9 kHz. The beam quality M 2 factor is 1.20, and the fundamental mode ratio is calculated to be above 97% in the output beam at the maximum output. This work provides an effective material-based strategy for power scaling of single-frequency fiber lasers with strong potential for practical applications.
- 10 March 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (6) , 1566-1569
311.7-W high-beam-quality single-frequency fiber laser based on heavy boron doping for SBS suppression
In this Letter, Yb-doped Al 2 O 3 –P 2 O 5 –B 2 O 3 –SiO 2 fibers are first studied with different B 2 O 3 doping levels to suppress stimulated Brillouin scattering (SBS). It is revealed that by heavy B 2 O 3 doping, the Brillouin gain spectrum broadens, and the gain coefficient decreases substantially, which leads to a significant SBS suppression effect. For Yb-doped fibers (YDFs) of 6.43 mole% B 2 O 3 , the Brillouin gain coefficient suppression ratio improves by more than 5.0 dB, and the SBS threshold of single-frequency (SF) laser emission enhances by 4.87 times, compared to YDF of weak B 2 O 3 doping. Based on the optimal B 2 O 3 -doped YDF with a step-index 20-μm-diameter core, high-beam-quality single-frequency laser emission has been achieved with 311.7 W output power. The laser linewidth is measured to be 2.9 kHz. The beam quality M 2 factor is 1.20, and the fundamental mode ratio is calculated to be above 97% in the output beam at the maximum output. This work provides an effective material-based strategy for power scaling of single-frequency fiber lasers with strong potential for practical applications.
- Open Access
- 18 December 2025
- Published by IOP Publishing in Journal of Physics: Photonics
- Vol. 8 (1)
Mode instability in coiled high power fibre amplifiers: revisiting with a modified theoretical model
Mode instability behaviour in high-power fibre amplifiers with various coiled packages has been investigated numerically by a modified theoretical model, considering the stimulated thermal Rayleigh scattering reseeded by spontaneous thermal Rayleigh noise. The modified model can avoid the physical fake case where the high order mode is reduced to below the spontaneous thermal Rayleigh noise level, which can cause as large as 30% overestimate of the mode instability threshold. The modified model improves the accuracy of the mode instability threshold simulations by >30%, and the discrepancy between experimental results and previous theoretical predictions is explained and eliminated by the modified theoretical model. Mode instability threshold as well as the high order mode evolution in various coiled high power fibre amplifiers is revisited based on this model, which reveals that, from the perspective of mitigating mode instability, fibre amplifiers with the gain fibre coiled in a cylindrical shape are superior to those in a spiral shape, and the mode instability threshold can be increased by nearly two times. It also shows that the current gain fibres do not reach the upper mode instability limits, and have the potential of delivering mode-instability-free 10kW fibre lasers. This work provides further insight on the physical mechanism of the mode instability, and can guide the design of the high-power fibre lasers to achieve near-diffraction-limited beam quality.
- 18 December 2025
- Published by IOP Publishing in Journal of Physics: Photonics
- Vol. 8 (1)
Open AccessMode instability in coiled high power fibre amplifiers: revisiting with a modified theoretical model
Mode instability behaviour in high-power fibre amplifiers with various coiled packages has been investigated numerically by a modified theoretical model, considering the stimulated thermal Rayleigh scattering reseeded by spontaneous thermal Rayleigh noise. The modified model can avoid the physical fake case where the high order mode is reduced to below the spontaneous thermal Rayleigh noise level, which can cause as large as 30% overestimate of the mode instability threshold. The modified model improves the accuracy of the mode instability threshold simulations by >30%, and the discrepancy between experimental results and previous theoretical predictions is explained and eliminated by the modified theoretical model. Mode instability threshold as well as the high order mode evolution in various coiled high power fibre amplifiers is revisited based on this model, which reveals that, from the perspective of mitigating mode instability, fibre amplifiers with the gain fibre coiled in a cylindrical shape are superior to those in a spiral shape, and the mode instability threshold can be increased by nearly two times. It also shows that the current gain fibres do not reach the upper mode instability limits, and have the potential of delivering mode-instability-free 10kW fibre lasers. This work provides further insight on the physical mechanism of the mode instability, and can guide the design of the high-power fibre lasers to achieve near-diffraction-limited beam quality.
- Open Access
Impact of LD Spectra on Efficiency of Yb-Doped Fiber Laser
The spectral characteristics of pump laser diodes (LDs) introduce significant ambiguity into the performance evaluation of high-power ytterbium-doped fiber lasers (YDFLs), obscuring their intrinsic efficiency and hindering reliable system design. Here, we introduce a rigorous quantitative framework that decouples these pump-induced effects by referencing laser performance to the absorbed, rather than the launched, pump power. Our analysis demonstrates that the widely reported discrepancies in conventional optical-to-optical (OO) and slope efficiencies are governed almost entirely by variations in pump absorption, while the influence of the quantum defect is negligible. This approach provides a robust metric for intrinsic laser performance that is independent of the LD’s spectral properties, proving particularly valuable for systems pumped by non-wavelength-stabilized LDs (nWS-LDs). We uncover a non-monotonic evolution of the unabsorbed residual pump power, revealing that the peak thermal load on system components occurs at an intermediate operational state, not at maximum pump power. This finding challenges conventional thermal management strategies and is critical for ensuring the long-term operational reliability of high-power YDFLs.
Open AccessImpact of LD Spectra on Efficiency of Yb-Doped Fiber Laser
The spectral characteristics of pump laser diodes (LDs) introduce significant ambiguity into the performance evaluation of high-power ytterbium-doped fiber lasers (YDFLs), obscuring their intrinsic efficiency and hindering reliable system design. Here, we introduce a rigorous quantitative framework that decouples these pump-induced effects by referencing laser performance to the absorbed, rather than the launched, pump power. Our analysis demonstrates that the widely reported discrepancies in conventional optical-to-optical (OO) and slope efficiencies are governed almost entirely by variations in pump absorption, while the influence of the quantum defect is negligible. This approach provides a robust metric for intrinsic laser performance that is independent of the LD’s spectral properties, proving particularly valuable for systems pumped by non-wavelength-stabilized LDs (nWS-LDs). We uncover a non-monotonic evolution of the unabsorbed residual pump power, revealing that the peak thermal load on system components occurs at an intermediate operational state, not at maximum pump power. This finding challenges conventional thermal management strategies and is critical for ensuring the long-term operational reliability of high-power YDFLs.
- Open Access
A 6 kW Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with a 0.43 nm Linewidth
A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.
Open AccessA 6 kW Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with a 0.43 nm Linewidth
A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.
- Open Access
- 18 June 2025
- Published by MDPI AG in Preprints.org
6 kW-Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with Linewidth Being 0.43nm
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.
- 18 June 2025
- Published by MDPI AG in Preprints.org
Open Access6 kW-Level Linearly Polarized Near-Diffraction-Limited Monolithic Fiber Laser with Linewidth Being 0.43nm
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.
- 27 May 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (6) , 1631
Origin of SBS-induced mode distortion in high power narrow linewidth fiber amplifiers
Stimulated Brillouin scattering (SBS)-induced mode distortion (MD) in high power narrow linewidth fiber amplifiers has been implemented, and the origin has been investigated from the aspect of the evolution of the optical spectrum, spatial beam profiles, and temporal-frequency domain characteristics. It is shown that, following the onset of the backward giant pulses generated by SBS, forward giant pulses were generated, which reached multi-kilowatt level peak power and triggered the onset of stimulated Raman scattering (SRS). After the onset of SRS, the beam quality starts to degrade, and the beam profiles deteriorate obviously. It reveals that the SBS-induced MD is a two-stage physical process: SBS-induced forward giant pulses trigger the SRS effect, and then the SRS effect causes the beam deterioration of the signal laser, which means that SRS is the origin of the MD observed after the onset of SBS. To the best of our knowledge, this is the first revelation of SBS-induced mode distortion in high power narrow linewidth fiber amplifiers, which can facilitate the in-depth understanding and effective suppression of the complicated mode evolution phenomena.
- 27 May 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (6) , 1631
Origin of SBS-induced mode distortion in high power narrow linewidth fiber amplifiers
Stimulated Brillouin scattering (SBS)-induced mode distortion (MD) in high power narrow linewidth fiber amplifiers has been implemented, and the origin has been investigated from the aspect of the evolution of the optical spectrum, spatial beam profiles, and temporal-frequency domain characteristics. It is shown that, following the onset of the backward giant pulses generated by SBS, forward giant pulses were generated, which reached multi-kilowatt level peak power and triggered the onset of stimulated Raman scattering (SRS). After the onset of SRS, the beam quality starts to degrade, and the beam profiles deteriorate obviously. It reveals that the SBS-induced MD is a two-stage physical process: SBS-induced forward giant pulses trigger the SRS effect, and then the SRS effect causes the beam deterioration of the signal laser, which means that SRS is the origin of the MD observed after the onset of SBS. To the best of our knowledge, this is the first revelation of SBS-induced mode distortion in high power narrow linewidth fiber amplifiers, which can facilitate the in-depth understanding and effective suppression of the complicated mode evolution phenomena.
- 29 February 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 84
Effect of thermal expansion to the coupling efficiency of (1 + 1) long distance side pumping fiber
- 29 February 2024
- Published by Elsevier in Optical Fiber Technology
- Vol. 84
Effect of thermal expansion to the coupling efficiency of (1 + 1) long distance side pumping fiber