BWBinyu Wang

Binyu Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Binyu Wang has a total of 46 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multiphysics Modeling and Parametric Optimization of Janus Particle Wheel Microactuators Under Alternating-Current Induced-Charge Electrophoresis

    by Xudong Wang, Qisheng Wu, Kai Du, Xiwei Zhou, Binyu Wang, Dan Chen, Xiaoming Chen, Weiyu Liu

    Electrokinetic actuation enables non-contact fluid transport and particle manipulation in microfluidic devices. Induced-charge electrokinetics (ICEK) is particularly attractive for AC-field actuation because it can generate strong electrohydrodynamic motion without fixed surface charges. Here, we investigate the rotation of metallodielectric Janus-particle (JP) wheels using a transient, fully coupled reduced-order two-dimensional multiphysics model incorporating moving-mesh solid mechanics, viscous flow with induced-charge electroosmotic (ICEO) slip, and resistor–capacitor (RC) charging of induced electrical double layers. The model identifies the frequency range for stable counterclockwise rotation and clarifies the effects of applied voltage, connecting-rod geometry, JP radius, electrolyte conductivity, and JP number. Under the conditions examined, the rotation is dominated by ICEO slip on the JP metal surfaces, while AC electroosmosis (ACEO) and dielectrophoretic (DEP) torque provide secondary contributions. Stable continuous rotation requires at least three JPs, and the three-JP wheel gives the highest time-averaged angular velocity among the tested configurations, reaching 26.2 rad/s at a field strength of 20 V/mm. Increasing electrolyte conductivity shifts the characteristic rotation frequency upward and decreases the peak speed, whereas the effects of JP radius are non-monotonic. These results provide design guidance for ICEK-based microfluidic actuators and microrobots.

  • Open Access

    Multi-Objective Parameter Optimization Design of Heat Pipe Heat Sink for Bidirectional Power Converter Based on MOEDO Algorithm

    by Zechen Su, Xiwei Zhou, Yangfan Li, Qisheng Wu, Hongwei Zhang, Binyu Wang, Weiyu Liu

    Bidirectional power converters generate significant heat losses during high-frequency operation, posing a severe challenge to the performance of heat dissipation systems. Traditional thermal design methods often struggle to balance multiple objectives, such as cooling efficiency, cost, weight, and size, thereby limiting the reliability and safety of the system. To address these challenges, this paper proposes a novel Multi-Objective Exponential Distribution Optimizer algorithm based on the Exponential Distribution Optimizer. Subsequently, key design variables of the heat dissipation system are selected. Next, the Optimal Latin Hypercube Sampling method is employed to generate sample points, and a second-order response surface surrogate model for the heat pipe radiator’s volume and temperature is developed. Lastly, by integrating elite non-dominated sorting, crowding distance mechanisms, and an information feedback mechanism, the multi-objective challenge is decomposed into subproblems, thereby enhancing optimization efficiency. Through comparative simulation experiments on benchmark functions, the Wilcoxon signed-rank test results for the MOEDO algorithm on the majority of the three metrics are denoted as ‘+’, indicating statistically significant advantages over the compared algorithms, thereby demonstrating its superior performance in addressing multi-objective optimization problems. The study further conducts simulation verification of the heat pipe heat dissipation system before and after optimization using ANSYS Icepak. The simulation results demonstrate that, compared with the conventional design, the maximum Insulated Gate Bipolar Transistor (IGBT) temperature is reduced by 17.12% and the heat sink volume is reduced by 14.61%.

  • Open Access

    A Probabilistic Model Based on Gamma Distribution for Performance Analysis of Urban Drainage Systems

    by Binyu Wang, Ruijie Zhou, Mengfei Qi, Ran Zhou, Wei Li, Xiwei Zhou, Qisheng Wu, Xiyao Liu, Weiyu Liu

    Evaluating urban drainage system efficacy is critical for design and renovation. Existing probabilistic models often rely on exponential distributions, which are inadequate for specific climatic regions (coefficient of variation of rainfall characteristics does not equal 1). This study proposes a Gamma distribution-based probabilistic model, integrating B.J. Adams’ rainfall-runoff transformation theory to accurately characterize rainfall properties (volume, duration, intensity, interevent time) and assess drainage system performance. A systematic, criteria-based framework is provided to determine where the Gamma model should be preferred. The model enhances estimation accuracy by incorporating both the mean and standard deviation of meteorological data, providing a reliable tool for engineering design.

  • Open Access

    An Enhanced Cooling Method for Power Modules on All-Electric Ships Based on Parameter Optimization and Special-Shaped Design of Sintered Heat Pipes

    by Binyu Wang, Ting Lu, Qisheng Wu, Bobin Yao, Hongwei Zhang, Xiwei Zhou, Weiyu Liu

    This paper proposes an enhanced cooling method for multi-chip power modules (e.g., in MMC inverters) with uneven power loss in all-electric propulsion ships based on sintered heat pipe parameter optimization and special-shaped design. First, five key parameters of straight sintered heat pipes were optimized: placement directly under hotspot chips, 10 mm in diameter, quantity matching the number of hotspot chips, length equal to the heatsink side length, and direction perpendicular to heatsink fins. Then, a C-shaped heat pipe was designed using the parallel thermal resistance principle, which forms two parallel low-thermal-resistance paths and outperforms conventional U-shaped ones. Finite element simulations showed that the hotspot temperature of the conventional heatsink was 91.26 °C, while it dropped to 87.35 °C with optimized straight heat pipes and further to 80.85 °C with C-shaped ones. Experiments verified an 11.65% temperature reduction (from 86.7 °C of conventional heatsinks to 76.6 °C of C-shaped heat pipe heatsinks). This method effectively lowers hotspot temperatures, reduces device failure rates, improves the thermal reliability of power modules, and provides a generalized design methodology for heatsinks of various power electronic converters.

  • Open Access

    An Asymmetric SiC Power Module Directly Integrated with Vapor Chamber for Thermal Balancing in MMC

    by Binyu Wang, Xiwei Zhou, Yawen Zhu, Mengfei Qi, Hai Lin, Bobin Yao, Shaohua Huang, Xuetao Wang, Qisheng Wu, Weiyu Liu

    Power modules in silicon carbide (SiC)-based modular multilevel converters (MMCs) suffer from notably severe thermal imbalance and localized overheating. This paper puts forward an asymmetric SiC power module with direct integration of a vapor chamber (VC), designed to balance the thermal distribution inside MMC SMs. Specifically, the chips on the lower side of the HBSM are soldered onto a VC, which is additionally mounted on the direct bonding copper (DBC). Endowed with merits such as favorable temperature uniformity, exceptional thermal conductivity, compact size, flexible design, high integration level, and reasonable cost, the VC serves as an outstanding heat diffuser significantly expanding the effective thermal conduction area and reducing thermal resistance. Moreover, in this structure, the VC also functions as a conductor for device current. Finite element method (FEM) simulation results reveal that the proposed structure can notably reduce the hotspot temperature (from 109 °C to 71.8 °C), the maximum temperature difference among chips (from 45 °C to 13.89 °C), and the low-frequency temperature swing (TSL) (from 68 °C to 38 °C). Consequently, the issues of localized overheating and thermal imbalance in SiC-MMC SMs are effectively addressed. Lifetime analysis further indicates that the proposed structure can reduce the annual damage rate of the chip solder layer by 92.6%.


  • An IGBT Boundary-Dependent Thermal Network Considering External Cooling Conditions and Thermal Coupling Effect

    by Xiaotong Zhang, Wei Mu, Binyu Wang, Xiangqian Tong, Jiawei Zhang, Kangning Wu, Jianying Li

    Thermal networks show superiority in temperature estimation of insulated gate bipolar transistor (IGBT) modules for reliability assessment. Unfortunately, the deteriorated thermal behaviors of actual radiators, such as water-cooled radiators, are not reflected due to the simplification for the external cooling conditions of IGBT modules, leading to the inaccuracy of thermal networks. This article proposes an IGBT boundary-dependent thermal network considering external cooling conditions and thermal coupling effect, which guarantees the accuracy with the consideration for the external cooling conditions provided by actual water-cooled radiator. The impact of blockage on velocity in the water-cooled radiator is primarily analyzed. The convective heat transfer process, which is dependent on initial velocity, blockage degree, and coolant material properties, is clarified. By analyzing the convective heat transfer process and thermal coupling effect, the thermal impedances are derived and can be easily extracted from finite-element method (FEM) simulations. The thermal behavior of the water-cooled radiator with blockage is characterized by the thermal impedances dominated by the initial velocity and blockage degree. The accuracy of the proposed boundary-dependent thermal network is verified by experiments.


  • Open Access

    YOLOv13-Cone-Lite: An Enhanced Algorithm for Traffic Cone Detection in Autonomous Formula Racing Cars

    by Zhukai Wang, Senhan Hu, Xuetao Wang, Yu Gao, Wenbo Zhang, Yaoyao Chen, Hai Lin, Tingting Gao, Junshuo Chen, Xianwu Gong, et al.

    This study introduces YOLOv13-Cone-Lite, an enhanced algorithm based on YOLOv13s, designed to meet the stringent accuracy and real-time performance demands for traffic cone detection in autonomous formula racing cars on enclosed tracks. We improved detection accuracy by refining the network architecture. Specifically, the DS-C3k2_UIB module, an advanced iteration of the Universal Inverted Bottleneck (UIB), was integrated into the backbone to boost small object feature extraction. Additionally, the Non-Maximum Suppression (NMS)-free ConeDetect head was engineered to eliminate post-processing delays. To accommodate resource-limited onboard terminals, we minimized superfluous parameters through structural reparameterization pruning and performed 8-bit integer (INT8) quantization using the TensorRT toolkit, resulting in a lightweight model. Experimental findings show that YOLOv13-Cone-Lite achieves a mAP50 of 92.9% (a 4.5% enhancement over the original YOLOv13s), a frame rate of 68 Hz (double the original model’s speed), and a parameter size of 8.7 MB (a 52.5% reduction). The proposed algorithm effectively addresses challenges like intricate lighting and long-range detection of small objects and offers the automotive industry a framework to develop more efficient onboard perception systems, while informing object detection in other closed autonomous environments like factory campuses. Notably, the model is optimized for enclosed tracks, with open traffic generalization needing further validation.


  • Open Access

    Near Junction Integration of Vapor Chamber for Transient Thermal Performance Improvements of SiC Power Module

    by Wei Mu, Laili Wang, Haoyuan Jin, Borong Hu, Binyu Wang, Jinfeng Zhang, Liang Wang, Teng Long

    Power semiconductor modules are mostly stressed when faced with large junction temperature variations, leading to failures such as bond wire lift-off and solder fatigue. This issue becomes more challenging with the implementation of SiC devices because their smaller die size reduces the thermal inertia and increases the thermal resistance. This paper explores the potential of utilizing vapor chamber (VC) through near junction integration inside a SiC power module to reduce junction temperature swings. A novel fabrication process enables the near junction integration of VC which not only acts as heat spreaders but also conducts the drain current of MOSFETs. The thermal impedance analysis in the frequency domain highlights VC's strong attenuation effect on medium frequency thermal cycles, which are particularly damaging to power modules. Two case studies are performed to evaluate the thermal performance of VC integrated module in traction inverter applications. Both simulations and experiments demonstrate the effectiveness of integrating VC: more than 33% reduction in maximum junction temperature and 44% reduction in junction temperature fluctuation. Time constant spectrum analysis further reveals that the VC module's superior thermal performance stems from its ability to minimize thermal resistance components with short time constants, a benefit that is unique to near-junction thermal management


  • Integration of a Clamp Double Submodule Based on Integrated Chips for MMC Reliability Improvement

    by Binyu Wang, Jiachen Tian, Xiaotong Zhang, Rui Yang, Wei Mu, Xiwei Zhou, Maode Yan

    Among different modular multilevel converters (MMCs) submodules (SMs), the clamp double submodule (CDSM) has the capability of dc-fault current clearing with a relatively small number of switching devices. Furthermore, the control scheme of CDSM-MMC is compatible to the HBSM-MMC in normal operation. Hence, CDSM is a cost-effective and promising solution for the MMCs with dc-fault handling capability. The dc-fault handling capability of CDSM is realized by adding an insulated gate bipolar transistor (IGBT) with its anti-paralleled diode and two independent diodes for every two HBSMs. The IGBT and its anti-paralleled diode connect the two HBSMs. However, since the connecting devices with greater current loading would be subject to extremely higher temperature and larger temperature excursion, the lifetime of the CDSM is severely limited. In this paper, a CDSM based on integrated chips is integrated. No additional cooling components and software-based techniques are introduced. The finite element method (FEM) simulation results show that the thermal stress of the connecting device can be reduced significantly by using integrated chips. And the lifetime of the connecting devices extends greatly. Finally, the advantages of the CDSM based on integrated chips is verified by experiments.