Amanda L. Miller
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amanda L. Miller has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- John A. Renye
Dairy and Functional Foods Research Unit, USDA Agricultural Research Services, Wyndmoor, PA 19038
7 shared publications - Rafael A. Garcia
Dairy and Functional Foods Research Unit, United States Department of Agriculture, Agricultural Research Service, Eastern Regional Research Center, Wyndmoor, PA 19038, USA
5 shared publications - Adam M. Oest
Dairy and Functional Foods Research Unit, Agricultural Research Service, United States Department of Agriculture, Wyndmoor, PA 19038, USA
4 shared publications - Peggy M. Tomasula
Dairy and Functional Foods Research Unit, USDA Agricultural Research Services, Wyndmoor, PA 19038
4 shared publications - Benjamin M. Plumier
Dairy and Functional Foods Research Unit, USDA, Agricultural Research Service, Eastern Regional Research Center, Wyndmoor, PA 19038
3 shared publications - Michael J. McAnulty
Dairy and Functional Foods Research Unit, USDA, Agricultural Research Service, Eastern Regional Research Center, Wyndmoor, PA 19038
3 shared publications
Latest Publications
- Open Access
Strain-Dependent Responses of Listeria monocytogenes Biofilms to Combined Enzymatic and Bacteriocin Treatments
Listeria monocytogenes forms resilient biofilms that protect cells from sanitizers and environmental stress, allowing the pathogen to persist in food processing environments. This study evaluated the combined effects of an engineered carbohydrate-active enzyme (CAase) and two food-grade bacteriocins, nisin and thermophilin 110 (T110), on biofilm disruption and cell inactivation. Biofilm biomass was quantified by crystal violet staining and visualized by microscopic imaging, with viable cells enumerated in treatment supernatants. Minimum inhibitory concentrations (MIC) for nisin (12.5–25 µg mL−1) and T110 (64 to 512 arbitrary units (AU) mL−1) were determined against all 11 L. monocytogenes strains, while CAase alone showed limited antimicrobial activity. CAase was shown to significantly reduce biofilm biomass, releasing embedded cells from the matrix. Nisin (25 µg mL−1) and T110 (1024 AU mL−1) were observed to decrease biofilm biomass and viable-cell recovery, but results were strain-dependent. Biofilm clearance improved for some L. monocytogenes strains when CAase was combined with either bacteriocin, but nisin was more effective at reducing the number of viable cells recovered. Results from this study demonstrated that enzymatic degradation of the extracellular matrix may enhance bacteriocin efficacy by improving access to target cells and support the potential of enzyme–bacteriocin combinations as food-safe biofilm control strategies in food production environments.
Open AccessStrain-Dependent Responses of Listeria monocytogenes Biofilms to Combined Enzymatic and Bacteriocin Treatments
Listeria monocytogenes forms resilient biofilms that protect cells from sanitizers and environmental stress, allowing the pathogen to persist in food processing environments. This study evaluated the combined effects of an engineered carbohydrate-active enzyme (CAase) and two food-grade bacteriocins, nisin and thermophilin 110 (T110), on biofilm disruption and cell inactivation. Biofilm biomass was quantified by crystal violet staining and visualized by microscopic imaging, with viable cells enumerated in treatment supernatants. Minimum inhibitory concentrations (MIC) for nisin (12.5–25 µg mL−1) and T110 (64 to 512 arbitrary units (AU) mL−1) were determined against all 11 L. monocytogenes strains, while CAase alone showed limited antimicrobial activity. CAase was shown to significantly reduce biofilm biomass, releasing embedded cells from the matrix. Nisin (25 µg mL−1) and T110 (1024 AU mL−1) were observed to decrease biofilm biomass and viable-cell recovery, but results were strain-dependent. Biofilm clearance improved for some L. monocytogenes strains when CAase was combined with either bacteriocin, but nisin was more effective at reducing the number of viable cells recovered. Results from this study demonstrated that enzymatic degradation of the extracellular matrix may enhance bacteriocin efficacy by improving access to target cells and support the potential of enzyme–bacteriocin combinations as food-safe biofilm control strategies in food production environments.
- Open Access
- 1 May 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (5) , 4946-4956
The effects of pasteurization on caseinate-based edible film solutions
Edible films based on the dairy protein casein have been developed, but widespread adoption will require pasteurization, and nothing is known about the effects of pasteurization on properties of the film solutions or their resulting films. This study investigated alterations in calcium and sodium caseinate-based film solutions due to commonly used pasteurization techniques: low temperature, long time; HTST; and UHT. All pasteurization conditions resulted in films with most textural properties and water vapor permeabilities having no significant changes in comparison to those made from nonpasteurized solutions; the only exceptions were films made from the UHT-processed calcium caseinate and HTST-processed sodium caseinate solutions having increased tensile strength and decreased yield stress, respectively. The solutions themselves, however, changed dramatically after higher temperature pasteurization conditions, with reduced viscosity (resistance to flow), and a weakened storage and loss moduli. The pasteurized solutions would thus be easier to process, except more complications may arise during casting. The particle size distribution of the solution based on calcium caseinate, but not the sodium caseinate, changed with all pasteurization techniques to become more polydisperse. Whereas lower temperature processing did not change solution stability, UHT increased stability of the sodium caseinate film solution, but decreased the suspension stability of the calcium caseinate film solution. Processing with UHT was the only pasteurization technique that proved effective in reducing microbial counts to below the limit of detection (1 log10 cfu∙mL-1). Overall, we demonstrated that caseinate-based film solutions may be pasteurized without concern of obvious changes to properties of resulting films; however, considerable rheological changes to the film-forming solutions are likely to occur.
- 1 May 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (5) , 4946-4956
Open AccessThe effects of pasteurization on caseinate-based edible film solutions
Edible films based on the dairy protein casein have been developed, but widespread adoption will require pasteurization, and nothing is known about the effects of pasteurization on properties of the film solutions or their resulting films. This study investigated alterations in calcium and sodium caseinate-based film solutions due to commonly used pasteurization techniques: low temperature, long time; HTST; and UHT. All pasteurization conditions resulted in films with most textural properties and water vapor permeabilities having no significant changes in comparison to those made from nonpasteurized solutions; the only exceptions were films made from the UHT-processed calcium caseinate and HTST-processed sodium caseinate solutions having increased tensile strength and decreased yield stress, respectively. The solutions themselves, however, changed dramatically after higher temperature pasteurization conditions, with reduced viscosity (resistance to flow), and a weakened storage and loss moduli. The pasteurized solutions would thus be easier to process, except more complications may arise during casting. The particle size distribution of the solution based on calcium caseinate, but not the sodium caseinate, changed with all pasteurization techniques to become more polydisperse. Whereas lower temperature processing did not change solution stability, UHT increased stability of the sodium caseinate film solution, but decreased the suspension stability of the calcium caseinate film solution. Processing with UHT was the only pasteurization technique that proved effective in reducing microbial counts to below the limit of detection (1 log10 cfu∙mL-1). Overall, we demonstrated that caseinate-based film solutions may be pasteurized without concern of obvious changes to properties of resulting films; however, considerable rheological changes to the film-forming solutions are likely to occur.
- Open Access
- 1 April 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (4) , 3544-3555
Wastewater treatment techniques for application in fat recovery from waste ice cream
Ice cream is a popular dairy food in the United States. Unfortunately, substantial loss of product occurs during production, despite it being of acceptable quality. There are many valuable components in waste ice cream (WIC) that can be utilized if separated. To investigate the potential of wastewater treatment techniques as a means of recovering fat from WIC, a variety of flocculants were tested on 5 ice cream varieties. The flocculation procedure was able to concentrate 89% to 100% of the total fat in 50% to 70% of the original volume. The amount of fat recovered was consistently superior to that recovered from previous centrifugation techniques. Increasing ice cream temperature was effective in reducing the need for flocculant, but was not economical under current cost estimates. Additionally, the remaining aqueous stream was shown to support the growth of Streptococcus thermophilus B59671 and production of its broad-spectrum bacteriocin, thermophilin 110, as well as Saccharomyces cerevisiae Y45, resulting in the production of ∼10% ethanol. This study demonstrates the potential for utilizing flocculation strategies to efficiently concentrate fat from WIC for recovery and generate a defatted stream for use in ethanol and bacteriocin production.
- 1 April 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (4) , 3544-3555
Open AccessWastewater treatment techniques for application in fat recovery from waste ice cream
Ice cream is a popular dairy food in the United States. Unfortunately, substantial loss of product occurs during production, despite it being of acceptable quality. There are many valuable components in waste ice cream (WIC) that can be utilized if separated. To investigate the potential of wastewater treatment techniques as a means of recovering fat from WIC, a variety of flocculants were tested on 5 ice cream varieties. The flocculation procedure was able to concentrate 89% to 100% of the total fat in 50% to 70% of the original volume. The amount of fat recovered was consistently superior to that recovered from previous centrifugation techniques. Increasing ice cream temperature was effective in reducing the need for flocculant, but was not economical under current cost estimates. Additionally, the remaining aqueous stream was shown to support the growth of Streptococcus thermophilus B59671 and production of its broad-spectrum bacteriocin, thermophilin 110, as well as Saccharomyces cerevisiae Y45, resulting in the production of ∼10% ethanol. This study demonstrates the potential for utilizing flocculation strategies to efficiently concentrate fat from WIC for recovery and generate a defatted stream for use in ethanol and bacteriocin production.
- Open Access
- 1 April 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (4) , 3556-3564
Fermentation of an aqueous ice cream by-product by lactose-utilizing yeast species
This study evaluated the fermentative performance of several yeast strains on the aqueous by-product of waste ice cream (WIC) to ethanol, comparing 3 reported lactose-utilizers, Kluyveromyces marxianus Y-329, Dekkera anomala Y-1414, and Kluyveromyces lactis 8585, with the non-lactose utilizer Streptomyces cerevisiae Y-45. Fermentation progression was monitored by weight loss, and HPLC was used to analyze the composition of the fermentates. Ethanol production reached >10% for S. cerevisiae and K. marxianus but was <5% for D. anomala and K. lactis, possibly due to catabolite repression from the hydrolysis of sucrose. Treatment of the WIC by-product with lactase increased the availability of fermentable carbohydrates, resulting in greater ethanol yields for all strains except K. marxianus Y-1414, which may be limited by its ethanol tolerance. A minimal medium supplemented with lactose, sucrose, or a combination of both sugars was used to test whether the yeast could metabolize lactose alone or in the presence of sucrose. Sucrose was utilized by all 4 strains and produced ethanol in the absence and presence of lactose. Lactose was only utilized by D. anomala Y-1414 and K. lactis 8585 in the absence of sucrose, confirming that the presence of sucrose can prevent lactose utilization by yeasts in this study. Fermentation efficiency was also determined, with S. cerevisiae Y-45 having achieved the greatest efficiency in sucrose alone, whereas K. lactis 8585 showed the greatest efficiency in lactose alone. Results from this study showed that S. cerevisiae remains the ideal candidate for the valorization of waste ice cream, as it had the highest ethanol yield in WIC by-product with lactose and increased when lactose was hydrolyzed with lactase, reaching 12.5% at 72 h.
- 1 April 2026
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 109 (4) , 3556-3564
Open AccessFermentation of an aqueous ice cream by-product by lactose-utilizing yeast species
This study evaluated the fermentative performance of several yeast strains on the aqueous by-product of waste ice cream (WIC) to ethanol, comparing 3 reported lactose-utilizers, Kluyveromyces marxianus Y-329, Dekkera anomala Y-1414, and Kluyveromyces lactis 8585, with the non-lactose utilizer Streptomyces cerevisiae Y-45. Fermentation progression was monitored by weight loss, and HPLC was used to analyze the composition of the fermentates. Ethanol production reached >10% for S. cerevisiae and K. marxianus but was <5% for D. anomala and K. lactis, possibly due to catabolite repression from the hydrolysis of sucrose. Treatment of the WIC by-product with lactase increased the availability of fermentable carbohydrates, resulting in greater ethanol yields for all strains except K. marxianus Y-1414, which may be limited by its ethanol tolerance. A minimal medium supplemented with lactose, sucrose, or a combination of both sugars was used to test whether the yeast could metabolize lactose alone or in the presence of sucrose. Sucrose was utilized by all 4 strains and produced ethanol in the absence and presence of lactose. Lactose was only utilized by D. anomala Y-1414 and K. lactis 8585 in the absence of sucrose, confirming that the presence of sucrose can prevent lactose utilization by yeasts in this study. Fermentation efficiency was also determined, with S. cerevisiae Y-45 having achieved the greatest efficiency in sucrose alone, whereas K. lactis 8585 showed the greatest efficiency in lactose alone. Results from this study showed that S. cerevisiae remains the ideal candidate for the valorization of waste ice cream, as it had the highest ethanol yield in WIC by-product with lactose and increased when lactose was hydrolyzed with lactase, reaching 12.5% at 72 h.
- Open Access
- 1 August 2025
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 108 (8) , 8237-8246
The valorization of waste ice cream into alcohol
Valorization of food waste or food by-products into higher-value products can benefit the food industry by contributing to the food supply chain. This study aimed to investigate the potential for using waste ice cream as a fermentation substrate for production of ethanol by yeast. Results showed that 2 Saccharomyces cerevisiae strains, Lalvin EC-1118 (Lallemand Inc.) and Ethanol Red (Lesaffre), were able to ferment an aqueous by-product of waste ice cream, resulting in the production of ethanol, ~7% (wt/vol). This most likely occurred due to the utilization of free monosaccharides or sucrose, because they were unable to ferment lactose. Lactase and glucoamylase were added, to increase the availability of fermentable carbohydrates, resulting in 9.77% and 9.30% (wt/vol) ethanol produced by Lalvin EC-118 and Ethanol Red strains, respectively. Both strains were also shown to not utilize the galactose released following the hydrolysis of lactose. Maximum ethanol production, above 13% (wt/vol), was seen in samples treated with a combination of lactase and a protease, suggesting that a lack of nitrogen was stalling the fermentation. A benchtop-scale distillation was performed using a fermented vanilla ice cream treated with protease, lactase, and diammonium phosphate. The distillation was successful, and several fractions with various aromas and odors were collected. Results from this study suggest that that ethanol production is a viable valorization strategy to produce distilled beverage alcohol from waste ice cream, which is expected to be free of protein allergens.
- 1 August 2025
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 108 (8) , 8237-8246
Open AccessThe valorization of waste ice cream into alcohol
Valorization of food waste or food by-products into higher-value products can benefit the food industry by contributing to the food supply chain. This study aimed to investigate the potential for using waste ice cream as a fermentation substrate for production of ethanol by yeast. Results showed that 2 Saccharomyces cerevisiae strains, Lalvin EC-1118 (Lallemand Inc.) and Ethanol Red (Lesaffre), were able to ferment an aqueous by-product of waste ice cream, resulting in the production of ethanol, ~7% (wt/vol). This most likely occurred due to the utilization of free monosaccharides or sucrose, because they were unable to ferment lactose. Lactase and glucoamylase were added, to increase the availability of fermentable carbohydrates, resulting in 9.77% and 9.30% (wt/vol) ethanol produced by Lalvin EC-118 and Ethanol Red strains, respectively. Both strains were also shown to not utilize the galactose released following the hydrolysis of lactose. Maximum ethanol production, above 13% (wt/vol), was seen in samples treated with a combination of lactase and a protease, suggesting that a lack of nitrogen was stalling the fermentation. A benchtop-scale distillation was performed using a fermented vanilla ice cream treated with protease, lactase, and diammonium phosphate. The distillation was successful, and several fractions with various aromas and odors were collected. Results from this study suggest that that ethanol production is a viable valorization strategy to produce distilled beverage alcohol from waste ice cream, which is expected to be free of protein allergens.
- Open Access
- 1 April 2025
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 108 (4) , 3314-3323
Effect of pH adjustments on a novel micellar casein–based edible 3-dimensional printing formulation
Three-dimensional (3D) food printing holds the potential to help reduce food waste by precise portion control and use of materials that are produced in excess or are otherwise discarded. This relatively new technology is likely to undergo decreases in equipment costs. To take advantage of such prospects, we developed a novel micellar casein-based edible 3D printing formulation. Our formulation relies on a highly concentrated micellar casein solution (27.75%, wt/wt, final) along with pH adjustments (3.5, 4.0, 4.8, 6.7, 7.2, and 8.2) at chilled temperature (4-9°C) to avoid premature aggregation. In comparison to the natural pH of 6.7, both alkalinization and acidification past the isoelectric point of 4.6 enhanced both elastic and viscous moduli that enable for shape retention during and after extrusion from a 3D food printer. However, alkalinization led to smaller increases in the viscous modulus and did not lead to the shape retention that acidification to 4.0 or 3.5 does. Both acidification and alkalinization also resulted in rougher surface textures compared with the formulation at pH 6.7. Whereas the pH 4.8 formulation had inferior shape retention qualities compared with those at the other pH values tested, it had optimized water resilience, defined here as minimized swelling and dissolution of dried structures placed in water. Overall, we present a novel casein-based 3D printing formulation that could be printed while chilled, and with properties that could be modified by pH adjustments.
- 1 April 2025
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 108 (4) , 3314-3323
Open AccessEffect of pH adjustments on a novel micellar casein–based edible 3-dimensional printing formulation
Three-dimensional (3D) food printing holds the potential to help reduce food waste by precise portion control and use of materials that are produced in excess or are otherwise discarded. This relatively new technology is likely to undergo decreases in equipment costs. To take advantage of such prospects, we developed a novel micellar casein-based edible 3D printing formulation. Our formulation relies on a highly concentrated micellar casein solution (27.75%, wt/wt, final) along with pH adjustments (3.5, 4.0, 4.8, 6.7, 7.2, and 8.2) at chilled temperature (4-9°C) to avoid premature aggregation. In comparison to the natural pH of 6.7, both alkalinization and acidification past the isoelectric point of 4.6 enhanced both elastic and viscous moduli that enable for shape retention during and after extrusion from a 3D food printer. However, alkalinization led to smaller increases in the viscous modulus and did not lead to the shape retention that acidification to 4.0 or 3.5 does. Both acidification and alkalinization also resulted in rougher surface textures compared with the formulation at pH 6.7. Whereas the pH 4.8 formulation had inferior shape retention qualities compared with those at the other pH values tested, it had optimized water resilience, defined here as minimized swelling and dissolution of dried structures placed in water. Overall, we present a novel casein-based 3D printing formulation that could be printed while chilled, and with properties that could be modified by pH adjustments.
- Open Access
- 5 January 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (1) , 399
Integrating Bacteriocins and Biofilm-Degrading Enzymes to Eliminate L. monocytogenes Persistence
Listeria monocytogenes is a Gram-positive bacterium causing listeriosis, a severe infection responsible for significant morbidity and mortality globally. Its persistence on food processing surfaces via biofilm formation presents a major challenge, as conventional sanitizers and antimicrobials exhibit limited efficacy against biofilm-embedded cells. This study investigates a novel approach combining an engineered polysaccharide-degrading enzyme (CAase) with a bacteriocin (thermophilin 110) produced by Streptococcus thermophilus. Laboratory assays evaluated the effectiveness of this combination in disrupting biofilms and inactivating L. monocytogenes on various surfaces. The results demonstrated that CAase effectively disrupts biofilm structures, while thermophilin 110 significantly reduces bacterial growth and viability. The preliminary trials indicate a dual-action approach offers a potential alternative to conventional treatments, enhancing food safety by effectively controlling Listeria biofilms in food processing environments.
- 5 January 2025
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 26 (1) , 399
Open AccessIntegrating Bacteriocins and Biofilm-Degrading Enzymes to Eliminate L. monocytogenes Persistence
Listeria monocytogenes is a Gram-positive bacterium causing listeriosis, a severe infection responsible for significant morbidity and mortality globally. Its persistence on food processing surfaces via biofilm formation presents a major challenge, as conventional sanitizers and antimicrobials exhibit limited efficacy against biofilm-embedded cells. This study investigates a novel approach combining an engineered polysaccharide-degrading enzyme (CAase) with a bacteriocin (thermophilin 110) produced by Streptococcus thermophilus. Laboratory assays evaluated the effectiveness of this combination in disrupting biofilms and inactivating L. monocytogenes on various surfaces. The results demonstrated that CAase effectively disrupts biofilm structures, while thermophilin 110 significantly reduces bacterial growth and viability. The preliminary trials indicate a dual-action approach offers a potential alternative to conventional treatments, enhancing food safety by effectively controlling Listeria biofilms in food processing environments.
- Open Access
- 1 June 2024
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 107 (6) , 3468-3477
Bacteriocin production by lactic acid bacteria using ice cream co-product as the fermentation substrate
Ice cream manufacture commonly results in the accumulation of wasted product that contains valuable food-grade quality components, including fat, carbohydrates, and protein. Methods have been developed for recovering the fat from this waste stream, but this results in the generation of a co-product rich in fermentable carbohydrates. This study aimed to investigate the potential for using this co-product as a fermentation substrate for production of antimicrobial peptides, called bacteriocins, by dairy starter cultures. Results showed that Streptococcus thermophilus B59671 and Lactococcus lactis 11454 produced the broad-spectrum bacteriocins thermophilin 110 and nisin, respectively, when the fermentation substrate was melted ice cream, or a co-product generated by a modified butter churning technique. Bacteriocin production varied depending on the brand and variety of vanilla ice cream used in this study. When an alternate enzyme-assisted fat extraction technique was used, S. thermophilus metabolism was impaired within the resulting co-product, and thermophilin 110 production was not observed. Lactococcus lactis was still able to grow in this co-product, but antimicrobial activity was not observed. Results from this study suggest the co-product generated when using the churning technique is a better choice to use as a base medium for future studies to optimize bacteriocin production.
- 1 June 2024
- Published by American Dairy Science Association in Journal of Dairy Science
- Vol. 107 (6) , 3468-3477
Open AccessBacteriocin production by lactic acid bacteria using ice cream co-product as the fermentation substrate
Ice cream manufacture commonly results in the accumulation of wasted product that contains valuable food-grade quality components, including fat, carbohydrates, and protein. Methods have been developed for recovering the fat from this waste stream, but this results in the generation of a co-product rich in fermentable carbohydrates. This study aimed to investigate the potential for using this co-product as a fermentation substrate for production of antimicrobial peptides, called bacteriocins, by dairy starter cultures. Results showed that Streptococcus thermophilus B59671 and Lactococcus lactis 11454 produced the broad-spectrum bacteriocins thermophilin 110 and nisin, respectively, when the fermentation substrate was melted ice cream, or a co-product generated by a modified butter churning technique. Bacteriocin production varied depending on the brand and variety of vanilla ice cream used in this study. When an alternate enzyme-assisted fat extraction technique was used, S. thermophilus metabolism was impaired within the resulting co-product, and thermophilin 110 production was not observed. Lactococcus lactis was still able to grow in this co-product, but antimicrobial activity was not observed. Results from this study suggest the co-product generated when using the churning technique is a better choice to use as a base medium for future studies to optimize bacteriocin production.