QHQiaoyu Hu

Qiaoyu Hu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qiaoyu Hu has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Piezoelectric surface acoustic wave memristor neural network

    by Yi Zhang, Yi Deng, Dingchen Wang, Zilong Xiong, Yang Jiang, Chenkai Deng, Chuying Tang, Shaocong Wang, Mujun Li, Xiaohui Wang, et al.

    Processing wireless RF signals using analog electromagnetic (EM) wave-based neural networks enables energy efficiency and parallelism by integrating sensing, memory, and computation, avoiding analog-to-digital conversions (ADCs) and the von-Neumann bottleneck. Yet, a notable challenge remains: the absence of compact and programmable building blocks for EM wave-based neural networks. To overcome this limitation, we propose a piezoelectric surface acoustic wave (SAW) memristor that integrates an Ag/SiO 2 /Au memristor with an acoustoelectric phase shifter. Operating at shorter wavelengths than EM waves, it offers a compact footprint and encodes tunable neural network parameters via nonvolatile programmability and the acoustoelectric effect. A proof-of-concept SAW memristor neural network was experimentally demonstrated on a vector classification task, achieving 91.7% accuracy on par with software while reducing footprint by 10 5 times versus EM systems and energy consumption by 37 times versus digital systems. This work paves the way for compact, energy-efficient RF signal processing at the edge.


  • A High Sensitivity and Linearity AlGaN/GaN SBD Thermal Sensor With Partially Recessed AlGaN Barrier Layer Near the Pt Anode

    by Yuhan Sun, Kangyao Wen, Wenmao Li, Chenkai Deng, Jiaqi He, Qiaoyu Hu, Mujun Li, Robert Sokolovskij, Yu-Long Jiang, Hong-Yu Yu

    An AlGaN/gallium nitride (GaN) Heterostructurebased Schottky barrier diode (SBD) temperature sensor with partially recessed AlGaN barrier layer near the Pt anode and 40-nm SiO2 dielectric under the field plate is proposed for high sensitivity and linearity thermal sensing. The partially thinned AlGaN barrier layer and the 40-nm dielectric with a high work function Pt anode metal collectively result in a lower 2-D electron gas (2DEG) density with a higher Schottky barrier and a wider depletion region, leading to a lower tunneling current with a higher thermal sensitivity and linearity below the turn on voltage. It is experimentally revealed that the SBD with a 3-nm residual AlGaN layer demonstrated the highest sensitivity of 3.75 mV/K with a linearity of 0.997 at 8 $\times$ 10-6 A. The systemic TCAD analysis was conducted to reveal the effects of the anode metal work function and the AlGaN barrier thickness toward the thermal sensing performance of the SBD. This work explores the optimum conditions to reduce the total tunneling current for the AlGaN/GaN-based thermal sensors and shows a great potential for high-performance thermal sensing applications in AlGaN/GaN Heterostructure-based power ICs without the introduction of p-GaN.

  • Open Access

    Study on the Relationship Between Threshold Voltage Instability and Gate Leakage Current in p-GaN HEMTs

    by Yifan Cui, Yang Jiang, Yutian Gan, Qiaoyu Hu, Qing Wang, Hongyu Yu

    This work uncovers a temperature-dependent relationship between gate leakage current (IG) and threshold voltage shift (DVTH) through an evaluation combining deep level transient spectroscopy (DLTS) measurements, IG testing, and assessments of VTH instability. Analysis across a temperature range of 80 K to 440 K of p-GaN gate defects on device characteristics. These findings indicate that the same type of gate defects simultaneously affects both gate leakage and VTH instability. Specifically, defects release holes during positive gate stress. During low-bias VTH measurement, the persistent negative charge from defects, due to slow hole re-trapping, enhances the depletion of the two-dimensional electron gas (2DEG) at the AlGaN/GaN interface, reducing 2DEG density and causing a positive DVTH. Furthermore, high-temperature gate bias (HTGB) stress significantly increases the concentration of relevant defects within the p-GaN gate, leading to a marked rise in both IG and VTH. Notably, the IG/VTH ratio remains consistent even after HTGB stress. These observations provide valuable insights into the relationship between gate defects and the performance of p-GaN gate HEMT.


  • A Novel AlGaN/GaN SBD Thermal Sensor With Ultralow Power, Excellent Linearity, and High Sensitivity

    by Yuhan Sun, Kangyao Wen, Fangzhou Du, Chenkai Deng, Wenmao Li, Jiaqi He, Qiaoyu Hu, Yang Jiang, Robert Sokolovskij, Qing Wang, et al.

    A novel AlGaN/GaN Schottky barrier diode (SBD) thermal sensor featuring a recessed anode and a thin Al0.25Ga0.75N barrier layer is fabricated, which is demonstrated to have ultralow power, excellent linearity and high sensitivity for thermal sensing. The AlGaN layer thickness is employed to trade off the tunneling current proportion against the two dimensional electron gas (2DEG) density for the thermionic emission (TE) dominated electron transportation with better linearity and high sensitivity of thermal sensing at ultralow power. A sensitivity of 1.39 mV/K with a linearity of 0.995 operating at 0.082 - 0.324 V for a constant current of 10-7 A is revealed. The proposed SBD sensor shows the great potential application for on-chip, low power, and high performance thermal sensing in monolithic AlGaN/GaN heterostructure based power ICs.


  • Improved gate leakage current and breakdown voltage of InAlN/GaN MIS-HEMTs by HfAlOx-based charge-trapping layer dielectric and in situ O3 treatment

    by Fangzhou Du, Yang Jiang, Peiran Wang, Kangyao Wen, Chuying Tang, Jiaqi He, Chenkai Deng, Yi Zhang, Mujun Li, Xiaohui Wang, et al.

    In this study, high-performance InAlN/GaN metal-insulator-semiconductor high electron mobility transistors (MIS-HEMTs) are fabricated using HfAlOx-based charge-trapping layer dielectric stack combined with in situ O3 treatment. A positive threshold voltage shift (ΔVTH) of 8.9 V is achieved due to the charge-trapping effect. The device also shows a high Ion/Ioff ratio of ∼1010, a low gate leakage current of ∼10−7 mA/mm, and a relatively high BVDS of 400 V. The suppression of gate leakage current results in an ultra-high gate breakdown voltage of 22.5 V, owing to the superior current blocking capability of the O3-based Al2O3/HfO2 blocking layers and the interface improvement between dielectric and InAlN barrier achieved through in situ O3 treatment. The time-dependent dielectric breakdown measurements reveal the quality and reliability of the dielectric layer, predicting a maximum VGS of 9.66 and 9.31 V for a 10-year lifetime at failure rates of 63.2% and 0.10%, respectively. Additionally, x-ray photoelectron spectroscopy, atomic force microscopy, and multi-frequency C–V measurements further verify the effectiveness of the in situ O3 treatment in the optimization of the dielectric/GaN interface. These results demonstrate a practical approach to significantly improve the performance of InAlN/GaN MIS-HEMTs.


  • Charge trapping gate stack enabled non-recessed normally off AlGaN/GaN HEMT with high threshold voltage stability

    by Kangyao Wen, Jiaqi He, Yang Jiang, Fangzhou Du, Chenkai Deng, Peiran Wang, Chuying Tang, Wenmao Li, Qiaoyu Hu, Yuhan Sun, et al.

    This paper reports a non-recessed normally off AlGaN/GaN high-electron-mobility transistor (HEMT) with a charge trapping gate dielectric stack. The charge trapping gate dielectric stack featuring a low density of fixed positive charges consists of an O3-based Al2O3 tunneling layer and an O3-based HfO2 blocking layer, both deposited via atomic layer deposition. For HEMT with a 15 nm AlGaN barrier layer, a threshold voltage of 2.57 V and an on-resistance of 8.50 Ω × mm are achieved. For positive bias temperature instability (PBTI) testing, the electric field provided by the 15 nm AlGaN layer serves as a barrier to channel carriers, significantly enhancing the PBTI test stability. The optimized gate dielectric stack enables the fabrication of the non-recessed normally off metal–insulator–semiconductor-HEMT with enhanced threshold voltage (Vth) stability.


  • Open Access

    Investigation of Nitrogen-Based Plasma Passivation on GaN RF HEMTs Using Various Precursors

    by Qiaoyu Hu, Wei-Chih Cheng, Xiguang Chen, Chenkai Deng, Lina Liao, Wenmao Li, Yang Jiang, Jiaqi He, Yi Zhang, Chuying Tang, et al.

    This study investigates the DC and RF performance of RF GaN High Electron Mobility Transistors (HEMTs) subjected to surface pretreatments by N2 and N2O plasma. The filling of nitrogen vacancies or the passivation effect introduced by the thin GaON layer result in enhanced DC characteristics and RF performance for devices treated with nitrogen-based plasma. Compared to the untreated device, the device treated with N2 plasma exhibited a significant improvement in performance i.e. the saturated current increased by approximately 16%, the characteristic frequency (fT) had an increase of 27.6 GHz, the maximum oscillating frequency (fmax) increased by 60.4 GHz. Furthermore, the breakdown voltage had a 10.7% increase, and the dynamic/static on-resistance ratio decreased from 1.34 to 1.18. These results highlight the potential of nitrogen-based plasma treatments in improving the performance of RF GaN HEMTs.

  • Open Access

    Improved breakdown performance in recessed-gate normally off GaN MIS-HEMTs by regrown fishbone trench

    by JiaQi He, PeiRan Wang, FangZhou Du, KangYao Wen, Yang Jiang, ChuYing Tang, ChenKai Deng, MuJun Li, QiaoYu Hu, Nick Tao, et al.

    This work develops a regrown fishbone trench (RFT) structure in selective area growth (SAG) technique to fabricate recessed-gate normally off GaN metal–insulator–semiconductor high electron mobility transistors (MIS-HEMTs). The RFT structure effectively modulates the electric field at high drain and gate biases, thus allowing the device to feature improved off-state and gate breakdown performance with a high positive Vth of 2 V. The simulated carrier concentration and electric field distributions reveal the mechanism of electric field weakening by RFT architecture. Meanwhile, the current collapse phenomenon is significantly suppressed, and the gate voltage swing is also enlarged. The maximum gate drive voltage of 9.2 V for 10-year reliability of RFT GaN MIS-HEMT, together with the improved linearity and block voltage, broadens the applications of SAG devices. Furthermore, the RFT structure also provides an etching-free method for fabricating normally off GaN MIS-HEMTs with multi-dimensional gates.