Yunfei Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yunfei Gao has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Dingcheng Yang
Information Engineering School, Nanchang University, Nanchang, China
3 shared publications - Xiaopeng Yuan
RWTH Aachen University
3 shared publications - Yulin Hu
Wuhan University
3 shared publications - Anke Schmeink
RWTH Aachen University
2 shared publications - Fahui Wu
Information Engineering School, Nanchang University, Nanchang, China
2 shared publications - Peng Wu
Wuhan University
2 shared publications
Latest Publications
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (7) , 9754-9769
Joint UAV 3D Deployment and Ground Device Association Optimizing for Multi-UAV-Aided MEC Heterogeneous Network
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Mobile Computing
- Vol. 25 (7) , 9754-9769
Joint UAV 3D Deployment and Ground Device Association Optimizing for Multi-UAV-Aided MEC Heterogeneous Network
- 4 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 2183-2187
A Geometric Method to Complete Closed-Form Solutions for UAV-Assisted 3D Coverage
This letter investigates a UAV-assisted wireless communication coverage network, where a UAV equipped with a directional antenna is dispatched to provide communication coverage service to two ground nodes. To improve communication quality under a fairness consideration, we aim to minimize the maximum UAV-to-node distance (i.e., a min–max fairness objective) while ensuring both nodes lie within the antenna beamwidth cone through jointly optimizing the 3D position and the antenna orientation of UAV. To tackle the formulated highly complicated non-convex problem, we propose a novel geometric approach which rigorously maps the original 3D position design problem to an equivalent 2D position design problem through leveraging the axis-symmetric structure of the problem and applying a bijection-based transformation. Then, via characterizing the monotonicity of the objective function, the closed form expression for the optimal solution is derived which can be equivalently covered to the optimal UAV 3D position of the original problem by inverse mapping. Afterwards, the corresponding optimal antenna orientation is obtained by analyzing the coverage constraints of the original 3D problem. Finally, simulation results demonstrate that our method provides the complete set of globally optimal closed-form solutions compared with benchmark.
- 4 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Communications Letters
- Vol. 30 (10897798) , 2183-2187
A Geometric Method to Complete Closed-Form Solutions for UAV-Assisted 3D Coverage
This letter investigates a UAV-assisted wireless communication coverage network, where a UAV equipped with a directional antenna is dispatched to provide communication coverage service to two ground nodes. To improve communication quality under a fairness consideration, we aim to minimize the maximum UAV-to-node distance (i.e., a min–max fairness objective) while ensuring both nodes lie within the antenna beamwidth cone through jointly optimizing the 3D position and the antenna orientation of UAV. To tackle the formulated highly complicated non-convex problem, we propose a novel geometric approach which rigorously maps the original 3D position design problem to an equivalent 2D position design problem through leveraging the axis-symmetric structure of the problem and applying a bijection-based transformation. Then, via characterizing the monotonicity of the objective function, the closed form expression for the optimal solution is derived which can be equivalently covered to the optimal UAV 3D position of the original problem by inverse mapping. Afterwards, the corresponding optimal antenna orientation is obtained by analyzing the coverage constraints of the original 3D problem. Finally, simulation results demonstrate that our method provides the complete set of globally optimal closed-form solutions compared with benchmark.
- Open Access
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 4, 17-32
Radio Map-Based Delivery Sequence Design and Trajectory Optimization in UAV Cargo Delivery Systems
In this paper, we consider a UAV-assisted cargo delivery system with limited payload capacity. Due to the limited load capacity of the cargo UAV, it needs to make multiple trips to the warehouse to pick up the parcels. Meanwhile, due to the uneven distribution of cellular signal strength in the air, to send logistics information to ground users (GUs) in time, the cellular-connected UAV needs to bypass the weak signal area in the air. Therefore, these two factors lead to the increase of the total cargo delivery time. To reduce the total delivery time and ensure the communication quality of the UAV, we formulate an objective function to be optimized, which is the weighted sum of the delivery time and the communication outage time of the cargo UAV. We propose a limited payload UAV delivery (LP-UAV-D) framework to solve this problem. The framework consists of the particle swarm optimization (PSO) algorithm and the dueling double deep Q network (D3QN) algorithm. We used two classic algorithms as control groups. The numerical results show that regardless of the maximum payload or flight speed of the UAV, the objective function value obtained through our proposed LP-UAV-D framework and with the help of radio maps is always the smallest. Specifically, the performance of solving the trade-off problem between delivery time and communication quality is improved by about 10%-20% compared with the two comparison algorithms.
- 2 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 4, 17-32
Open AccessRadio Map-Based Delivery Sequence Design and Trajectory Optimization in UAV Cargo Delivery Systems
In this paper, we consider a UAV-assisted cargo delivery system with limited payload capacity. Due to the limited load capacity of the cargo UAV, it needs to make multiple trips to the warehouse to pick up the parcels. Meanwhile, due to the uneven distribution of cellular signal strength in the air, to send logistics information to ground users (GUs) in time, the cellular-connected UAV needs to bypass the weak signal area in the air. Therefore, these two factors lead to the increase of the total cargo delivery time. To reduce the total delivery time and ensure the communication quality of the UAV, we formulate an objective function to be optimized, which is the weighted sum of the delivery time and the communication outage time of the cargo UAV. We propose a limited payload UAV delivery (LP-UAV-D) framework to solve this problem. The framework consists of the particle swarm optimization (PSO) algorithm and the dueling double deep Q network (D3QN) algorithm. We used two classic algorithms as control groups. The numerical results show that regardless of the maximum payload or flight speed of the UAV, the objective function value obtained through our proposed LP-UAV-D framework and with the help of radio maps is always the smallest. Specifically, the performance of solving the trade-off problem between delivery time and communication quality is improved by about 10%-20% compared with the two comparison algorithms.
- Open Access
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 10844-10856
UAV-Enabled Inspection System With No-Fly Zones: DRL-Based Joint Mobile Nest Scheduling and UAV Trajectory Design
Unmanned aerial vehicle (UAV)-enabled inspection is regarded as a promising technology in the electricity system. This paper investigates aUAV-enabled inspection system in an urban environment with no-fly zones (NFZs), where the UAV flies to inspection points to capture images while constrained by limited onboard energy. The aim of this paper is to minimize the whole inspection time via joint optimization of the mobile nest’s scheduling and UAV trajectory while satisfying constraints related to energy maximization and avoiding NFZs. The formulated problem is a multivariate mixed non-convex optimization problem (due to the presence of NFZs), which makes it challenging to address with conventional techniques such as successive convex approximation and graph theory. To solve these issues, we first model the proposed problem as a Markov decision process (MDP). Then we propose an efficient two-step optimization method which involves optimizing the UAV trajectory with a modified multi-step dueling DDQN (MSD-DDQN) algorithm and planning the mobile nest’s path using the A* algorithm. Finally, the effectiveness of the proposed algorithm is verified by simulation experiments. In particular, the proposed method not only accelerates algorithm convergence but also reduces inspection time by 35 % compared to baseline methods.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 10844-10856
Open AccessUAV-Enabled Inspection System With No-Fly Zones: DRL-Based Joint Mobile Nest Scheduling and UAV Trajectory Design
Unmanned aerial vehicle (UAV)-enabled inspection is regarded as a promising technology in the electricity system. This paper investigates aUAV-enabled inspection system in an urban environment with no-fly zones (NFZs), where the UAV flies to inspection points to capture images while constrained by limited onboard energy. The aim of this paper is to minimize the whole inspection time via joint optimization of the mobile nest’s scheduling and UAV trajectory while satisfying constraints related to energy maximization and avoiding NFZs. The formulated problem is a multivariate mixed non-convex optimization problem (due to the presence of NFZs), which makes it challenging to address with conventional techniques such as successive convex approximation and graph theory. To solve these issues, we first model the proposed problem as a Markov decision process (MDP). Then we propose an efficient two-step optimization method which involves optimizing the UAV trajectory with a modified multi-step dueling DDQN (MSD-DDQN) algorithm and planning the mobile nest’s path using the A* algorithm. Finally, the effectiveness of the proposed algorithm is verified by simulation experiments. In particular, the proposed method not only accelerates algorithm convergence but also reduces inspection time by 35 % compared to baseline methods.
- Open Access
- 2 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 2, 1248-1264
Energy Minimization for Federated Learning Based Radio Map Construction
This paper studies an unmanned aerial vehicle (UAV)-enabled communication network, in which the UAV acts as an air relay serving multiple ground users (GUs) to jointly construct an accurate radio map or channel knowledge maps (CKM) through a federated learning (FL) algorithm. Radio map or CKM is a site-specific database that contains detailed channel-related information for specific locations. This information includes channel power gains, shadowing, interference, and angles of arrival (AoA) and departure (AoD), all of which are crucial for enabling environment-aware wireless communications. Because the wireless communication network has limited resource blocks (RBs), only a subset of users can be selected to transmit the model parameters at each iteration. Since the FL training process requires multiple transmission model parameters, the energy limitation of the wireless device will seriously affect the quality of the FL result. In this sense, the energy consumption and resource allocation have a significance to the final FL training result. We formulate an optimization problem by jointly considering user selection, wireless resource allocation, and UAV deployment, with the goal of minimizing the computation energy and wireless transmission energy. To solve the problem, we first propose a probabilistic user selection mechanism to reduce the total number of FL iterations, whereby the users who have a larger impact on the global model in each iteration are more likely to be selected. Then the convex optimization technique is utilized to optimize bandwidth allocation. Furthermore, to further save communication transmission energy, we use deep reinforcement learning (DRL) to optimize the deployment location of the UAV. The DRL-based method enables the UAV to learn from its interaction with the environment and ascertain the most energy-efficient deployment locations through an evaluation of energy consumption during the training process. Finally, the simulation results show that our proposed algorithm can reduce the total energy consumption by nearly 38%, compared to the standard FL algorithm.
- 2 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Machine Learning in Communications and Networking
- Vol. 2, 1248-1264
Open AccessEnergy Minimization for Federated Learning Based Radio Map Construction
This paper studies an unmanned aerial vehicle (UAV)-enabled communication network, in which the UAV acts as an air relay serving multiple ground users (GUs) to jointly construct an accurate radio map or channel knowledge maps (CKM) through a federated learning (FL) algorithm. Radio map or CKM is a site-specific database that contains detailed channel-related information for specific locations. This information includes channel power gains, shadowing, interference, and angles of arrival (AoA) and departure (AoD), all of which are crucial for enabling environment-aware wireless communications. Because the wireless communication network has limited resource blocks (RBs), only a subset of users can be selected to transmit the model parameters at each iteration. Since the FL training process requires multiple transmission model parameters, the energy limitation of the wireless device will seriously affect the quality of the FL result. In this sense, the energy consumption and resource allocation have a significance to the final FL training result. We formulate an optimization problem by jointly considering user selection, wireless resource allocation, and UAV deployment, with the goal of minimizing the computation energy and wireless transmission energy. To solve the problem, we first propose a probabilistic user selection mechanism to reduce the total number of FL iterations, whereby the users who have a larger impact on the global model in each iteration are more likely to be selected. Then the convex optimization technique is utilized to optimize bandwidth allocation. Furthermore, to further save communication transmission energy, we use deep reinforcement learning (DRL) to optimize the deployment location of the UAV. The DRL-based method enables the UAV to learn from its interaction with the environment and ascertain the most energy-efficient deployment locations through an evaluation of energy consumption during the training process. Finally, the simulation results show that our proposed algorithm can reduce the total energy consumption by nearly 38%, compared to the standard FL algorithm.
- Top Cited Papers
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10164-10180
UAV-Assisted MEC System With Mobile Ground Terminals: DRL-Based Joint Terminal Scheduling and UAV 3D Trajectory Design
Inthis paper, we investigate an unmanned aerial vehicle (UAV)-assisted edge computing network in a sophisticated three-dimensional (3D) scenario, e.g., a post-disaster urban area with multiple mobile ground terminals (GTs) for resilience. The mission of the UAV is to first collect a set of computation tasks from multiple GT sources, then process them and make joint decisions (computation results) which are finally transmitted to another set of GT destinations. An efficient design is provided aiming at minimizing the total time cost including costs for the task offloading, computations, and decision transmissions, via jointly designing the UAV's trajectory and the scheduling of communications from and to different GTs. In particular, we take into account the practical assumptions on the GTs' mobility, on the obstacle avoidance to 3D buildings, and on that the UAV is possible to fly among buildings, i.e., the flying altitude can be lower than the buildings' heights. To address the established complex and non-convex problem, we first provide a problem transformation by exploiting Markov decision process (MDP), and then propose a deep reinforcement learning (DRL) approach-based solution with a multi-step dueling DDQN (D3QN) method. As a result, an efficient solution is achieved, where the UAV acts as the agent to continuously explore and improve its mobile strategy during interacting with the environment under the proposed method. The simulation results show the advantages of the proposed 3D trajectory design in comparison to a 2D one. In addition, the results confirm the robustness of the proposed design in terms of different GTs' mobility models and UAV flying height/area limits, and illustrate the superiority of unrestricted feasible domains for the UAV flight.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (7) , 10164-10180
Top Cited PapersUAV-Assisted MEC System With Mobile Ground Terminals: DRL-Based Joint Terminal Scheduling and UAV 3D Trajectory Design
Inthis paper, we investigate an unmanned aerial vehicle (UAV)-assisted edge computing network in a sophisticated three-dimensional (3D) scenario, e.g., a post-disaster urban area with multiple mobile ground terminals (GTs) for resilience. The mission of the UAV is to first collect a set of computation tasks from multiple GT sources, then process them and make joint decisions (computation results) which are finally transmitted to another set of GT destinations. An efficient design is provided aiming at minimizing the total time cost including costs for the task offloading, computations, and decision transmissions, via jointly designing the UAV's trajectory and the scheduling of communications from and to different GTs. In particular, we take into account the practical assumptions on the GTs' mobility, on the obstacle avoidance to 3D buildings, and on that the UAV is possible to fly among buildings, i.e., the flying altitude can be lower than the buildings' heights. To address the established complex and non-convex problem, we first provide a problem transformation by exploiting Markov decision process (MDP), and then propose a deep reinforcement learning (DRL) approach-based solution with a multi-step dueling DDQN (D3QN) method. As a result, an efficient solution is achieved, where the UAV acts as the agent to continuously explore and improve its mobile strategy during interacting with the environment under the proposed method. The simulation results show the advantages of the proposed 3D trajectory design in comparison to a 2D one. In addition, the results confirm the robustness of the proposed design in terms of different GTs' mobility models and UAV flying height/area limits, and illustrate the superiority of unrestricted feasible domains for the UAV flight.