Andrea Massaccesi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrea Massaccesi has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Luigi Martirano
Sapienza University of Rome, Rome, Italy
8 shared publications - Cristina Moscatiello
Sapienza University of Rome, Rome, Italy
6 shared publications - Elisa Belloni
Department of Engineering, University of Perugia, 06125 Perugia, Italy
4 shared publications - Riccardo Loggia
Sapienza University of Rome, Rome, Italy
4 shared publications Alessandro Flamini
Sapienza, University of Rome, Rome, Italy
3 shared publications- Alessandro Galasso
DIAEE, Sapienza University of Rome,Rome,Italy
3 shared publications
Latest Publications
- Open Access
- 24 July 2025
- Published by Elsevier in Energy and Buildings
- Vol. 347
Design, strategies, and performance monitoring for nearly zero energy buildings (nZEB): optimization and economic/environmental analysis in energy districts context
- 24 July 2025
- Published by Elsevier in Energy and Buildings
- Vol. 347
Open AccessDesign, strategies, and performance monitoring for nearly zero energy buildings (nZEB): optimization and economic/environmental analysis in energy districts context
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 5060-5069
Load Consumption Buzzer PowerAlert Integrated in Italian Residential LV Energy Communities
Residential housing is increasingly oriented toward all-electric consumption, also replacing gas loads. Users are under contract by an electricity provider that sets a power threshold above which the supplied is interrupted, that means it is increasingly difficult to stay below the threshold. The paper proposes an innovative device, called PowerAlert, that could show real-time power consumption with an audible signal related to the power thresholds set by the user. It is possible to switch the display between power consumption and the real-time clock with a simple push button. During device configuration is possible to connect it to a wireless network, to set a power meter among those available and its IP address. It is also possible to set three power thresholds referred to three different frequencies of the buzzer as alarm. This device can also be useful for monitoring modern electric devices that work in pulse mode and thermally stress protections that might intervene later. This paper is an extended version of a paper presented in I&CPS Las Vegas 2024 [1]
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 5060-5069
Load Consumption Buzzer PowerAlert Integrated in Italian Residential LV Energy Communities
Residential housing is increasingly oriented toward all-electric consumption, also replacing gas loads. Users are under contract by an electricity provider that sets a power threshold above which the supplied is interrupted, that means it is increasingly difficult to stay below the threshold. The paper proposes an innovative device, called PowerAlert, that could show real-time power consumption with an audible signal related to the power thresholds set by the user. It is possible to switch the display between power consumption and the real-time clock with a simple push button. During device configuration is possible to connect it to a wireless network, to set a power meter among those available and its IP address. It is also possible to set three power thresholds referred to three different frequencies of the buzzer as alarm. This device can also be useful for monitoring modern electric devices that work in pulse mode and thermally stress protections that might intervene later. This paper is an extended version of a paper presented in I&CPS Las Vegas 2024 [1]
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 5035-5045
Measurement of Nonsinusoidal Electric Power on Distributed Nonlinear Loads
The change in the electrical nature of the loads together with the loss of linearity are increasingly common phenomena in buildings, which requires special attention during the design phase of the electrical system in order to avoid problems in the management of reactive power flows and to better manage the power quality of the system. The presence of distributed nonlinear loads determines unusual behavior in terms of reactive power flux for the high harmonic distortion and for the capacitive behavior of the loads. Capacitive behavior is often evident when measuring reactive power in electrical systems feeding tertiary or commercial buildings, they feed reactive power at certain times of the day from a private network into a public network. The aim of this work is to analyze the performance of power systems feeding non-linear distributed loads with harmonic distortion and capacitive behavior, highlighting when this is real and when it is simply due to incorrect power factor measurements. If the behavior is truly capacitive, the problem can be solved by replacing the power factor correction systems with static compensators that are able to compensate reactive power for both capacitive and inductive behavior, working on all 4 quadrants. At the end, a real case study shows the unusual behavior of the distributed non-linear loads.
- 11 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (3) , 5035-5045
Measurement of Nonsinusoidal Electric Power on Distributed Nonlinear Loads
The change in the electrical nature of the loads together with the loss of linearity are increasingly common phenomena in buildings, which requires special attention during the design phase of the electrical system in order to avoid problems in the management of reactive power flows and to better manage the power quality of the system. The presence of distributed nonlinear loads determines unusual behavior in terms of reactive power flux for the high harmonic distortion and for the capacitive behavior of the loads. Capacitive behavior is often evident when measuring reactive power in electrical systems feeding tertiary or commercial buildings, they feed reactive power at certain times of the day from a private network into a public network. The aim of this work is to analyze the performance of power systems feeding non-linear distributed loads with harmonic distortion and capacitive behavior, highlighting when this is real and when it is simply due to incorrect power factor measurements. If the behavior is truly capacitive, the problem can be solved by replacing the power factor correction systems with static compensators that are able to compensate reactive power for both capacitive and inductive behavior, working on all 4 quadrants. At the end, a real case study shows the unusual behavior of the distributed non-linear loads.
- Open Access
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 119602-119614
Applications of Hybrid Solar Streetlamps: Electrical Performance Measurements and Development of Algorithms for Their Optimal Management
This study examines the electrical performance and management of hybrid solar street lighting systems with the objective of optimizing their operation for sustainable urban development. Hybrid solar streetlights, which integrate photovoltaic panels with additional power sources, offer resilience and reliability that are crucial for urban settings. A hybrid solar streetlamp was installed in a city in central Italy and monitored for over a year to analyze its electrical behavior and the illuminances obtainable under different boundary conditions and operational programs. The measured data permit the development of an optimization algorithm in a Python program for the optimal management of the solar streetlamp and the forecasting of the battery charging/discharging cycles, as well as the electricity taken from the grid. The simulation scenarios permit the development of a novel management algorithm that is capable of optimizing the battery usage with a minimal draw on the grid in order to achieve a state of near self-sufficiency for the solar streetlamp. The results demonstrate that tilted solar panels enhance energy production, while optimized LED power profiles and system management enhance efficiency. The study highlights the importance of maintaining the state of charge (SOC) of the battery above 20% to extend its lifetime and reduce replacement needs. Economic analysis indicates significant potential energy savings, emphasizing the necessity of system optimization for economic viability and environmental sustainability in urban lighting. Despite initial investment costs and challenges, adopting hybrid solar lighting in urban environments presents substantial benefits, paving the way for a more sustainable and energy-efficient urban future.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 119602-119614
Open AccessApplications of Hybrid Solar Streetlamps: Electrical Performance Measurements and Development of Algorithms for Their Optimal Management
This study examines the electrical performance and management of hybrid solar street lighting systems with the objective of optimizing their operation for sustainable urban development. Hybrid solar streetlights, which integrate photovoltaic panels with additional power sources, offer resilience and reliability that are crucial for urban settings. A hybrid solar streetlamp was installed in a city in central Italy and monitored for over a year to analyze its electrical behavior and the illuminances obtainable under different boundary conditions and operational programs. The measured data permit the development of an optimization algorithm in a Python program for the optimal management of the solar streetlamp and the forecasting of the battery charging/discharging cycles, as well as the electricity taken from the grid. The simulation scenarios permit the development of a novel management algorithm that is capable of optimizing the battery usage with a minimal draw on the grid in order to achieve a state of near self-sufficiency for the solar streetlamp. The results demonstrate that tilted solar panels enhance energy production, while optimized LED power profiles and system management enhance efficiency. The study highlights the importance of maintaining the state of charge (SOC) of the battery above 20% to extend its lifetime and reduce replacement needs. Economic analysis indicates significant potential energy savings, emphasizing the necessity of system optimization for economic viability and environmental sustainability in urban lighting. Despite initial investment costs and challenges, adopting hybrid solar lighting in urban environments presents substantial benefits, paving the way for a more sustainable and energy-efficient urban future.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (6) , 8254-8262
A Real Smart Digital Current Simulator Prototype for BESS Power Management
Commercial Battery Energy Storage Systems are equipped with a standard control unit with simplified logic, able to reduce the impact of the power system on the electric grid. The standard control is locked in a closed environment without any chance to modify the logic. The control unit receives signals from current sensors located at the entrance point of the power system. This paper presents a proposal of innovative device called Smart Digital Current Simulator as a substitute of those current sensors, aiming to generate a sinusoidal signal that falsifies the real induced current inside current sensor's windings by house power leads, in order to fool the control unit to inject or withdraw the desired electric power from or to the electric system. This paper shows a prototype of the suggested device completed of the open sources Node-Red server, Mosquitto broker and Home Assistant Container. This device communicates through Mosquitto protocol and can be managed by a user-friendly Graphic User Interface with open logics to manage a user-desired charge and discharge. Also, allows complying Demand Side Management and Demand Response strategies, otherwise not possible. Moreover, it is useful to buy energy when the price of electricity is below a specific threshold or the Battery Storage power is preferred instead of the grid power when the price of electricity is above a specific threshold. Finally, is able to perform a peak shaving to keep the withdrawal of power constant from the grid. This paper was presented in the conference IEEE IAS Nashville 2023 [1].
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (6) , 8254-8262
A Real Smart Digital Current Simulator Prototype for BESS Power Management
Commercial Battery Energy Storage Systems are equipped with a standard control unit with simplified logic, able to reduce the impact of the power system on the electric grid. The standard control is locked in a closed environment without any chance to modify the logic. The control unit receives signals from current sensors located at the entrance point of the power system. This paper presents a proposal of innovative device called Smart Digital Current Simulator as a substitute of those current sensors, aiming to generate a sinusoidal signal that falsifies the real induced current inside current sensor's windings by house power leads, in order to fool the control unit to inject or withdraw the desired electric power from or to the electric system. This paper shows a prototype of the suggested device completed of the open sources Node-Red server, Mosquitto broker and Home Assistant Container. This device communicates through Mosquitto protocol and can be managed by a user-friendly Graphic User Interface with open logics to manage a user-desired charge and discharge. Also, allows complying Demand Side Management and Demand Response strategies, otherwise not possible. Moreover, it is useful to buy energy when the price of electricity is below a specific threshold or the Battery Storage power is preferred instead of the grid power when the price of electricity is above a specific threshold. Finally, is able to perform a peak shaving to keep the withdrawal of power constant from the grid. This paper was presented in the conference IEEE IAS Nashville 2023 [1].
- Open Access
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 46657-46667
Implementation of a New Solar-Powered Street Lighting System: Optimization and Technical-Economic Analysis Using Artificial Intelligence
Public lighting system represents a key role in the energy transition process, considering the high electricity consumptions related to this sector. The integration of renewables could be suitable for this application and many solutions of solar-based lamps for street lighting are spreading. In this research work a specific application of a PV-integrated lighting system was installed in the center of Italy along a footpath and monitored for several months, both in terms of electricity parameters and lighting behavior. It is equipped with monocrystalline photovoltaic cells, a lithium-based battery, and a LED lamp. The measured data allow the development of an optimization algorithm in Python program for the correct management of the solar streetlamp and the forecasting of electricity consumptions for different boundary conditions (e.g. Italian geographical position). The energy taken from grid in a year is very low with respect to a traditional lamp not powered by renewables: only 43-46% in central-northern regions and 35% in south region. Data are also used to study the possible substitution of all the traditional lamppost of the walkway with the novel proposed system. A technical-economic analysis is carried out to analyze the effectiveness of this solution not only in terms of electricity consumptions reduction, but also costs savings. The suitability of the investment and the payback time depend on Italian national price of electricity and initial cost of the solar lamp. The results can be applied to similar case studies in Italy to save electricity consumptions and reduce CO 2 emissions.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 46657-46667
Open AccessImplementation of a New Solar-Powered Street Lighting System: Optimization and Technical-Economic Analysis Using Artificial Intelligence
Public lighting system represents a key role in the energy transition process, considering the high electricity consumptions related to this sector. The integration of renewables could be suitable for this application and many solutions of solar-based lamps for street lighting are spreading. In this research work a specific application of a PV-integrated lighting system was installed in the center of Italy along a footpath and monitored for several months, both in terms of electricity parameters and lighting behavior. It is equipped with monocrystalline photovoltaic cells, a lithium-based battery, and a LED lamp. The measured data allow the development of an optimization algorithm in Python program for the correct management of the solar streetlamp and the forecasting of electricity consumptions for different boundary conditions (e.g. Italian geographical position). The energy taken from grid in a year is very low with respect to a traditional lamp not powered by renewables: only 43-46% in central-northern regions and 35% in south region. Data are also used to study the possible substitution of all the traditional lamppost of the walkway with the novel proposed system. A technical-economic analysis is carried out to analyze the effectiveness of this solution not only in terms of electricity consumptions reduction, but also costs savings. The suitability of the investment and the payback time depend on Italian national price of electricity and initial cost of the solar lamp. The results can be applied to similar case studies in Italy to save electricity consumptions and reduce CO 2 emissions.
- 9 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (3) , 5142-5149
Stand-Alone LED Lighting System Powered by PV and Battery: Electrical Overall Performance Analysis of a Case Study
In the present paper an innovative street lighting system with solar PV and battery as the source of electricity was monitored and analyzed considering a case study installed in Italy center. A Light Emitting Diode (LED) is used together with a dimmer control system. This application is new because high efficiency PV cells are applied to the cylindrical surface of the pole: monocrystalline cells have diodes able to bypass the cells that are not directly irradiated by sun to allow the best performance of the PV. The data of this solution were monitored for one year in terms of LED consumptions, current, voltage, PV power, and charging-discharging performance of the battery. These electricity parameters were hourly investigated considering different boundary conditions (weather parameters). These results allow to propose different optimization strategies in terms of scheduling and management of the system related to all the electrical components. The best sizing of the PV and the optimal scheduling profile were proposed based on the experimental and numerical analysis.
- 9 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (3) , 5142-5149
Stand-Alone LED Lighting System Powered by PV and Battery: Electrical Overall Performance Analysis of a Case Study
In the present paper an innovative street lighting system with solar PV and battery as the source of electricity was monitored and analyzed considering a case study installed in Italy center. A Light Emitting Diode (LED) is used together with a dimmer control system. This application is new because high efficiency PV cells are applied to the cylindrical surface of the pole: monocrystalline cells have diodes able to bypass the cells that are not directly irradiated by sun to allow the best performance of the PV. The data of this solution were monitored for one year in terms of LED consumptions, current, voltage, PV power, and charging-discharging performance of the battery. These electricity parameters were hourly investigated considering different boundary conditions (weather parameters). These results allow to propose different optimization strategies in terms of scheduling and management of the system related to all the electrical components. The best sizing of the PV and the optimal scheduling profile were proposed based on the experimental and numerical analysis.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-10
A prototype of Low-Cost Home Automation System for Energy Savings and Living Comfort
In order to put into practice the objectives proposed by the policy of energy transition towards systems and buildings increasingly electrified, smart and sustainable, the massive digitization of environments and systems in both residential and commercial plays a key role, in view of the 'internet of things'. This paper aims to demonstrate the possibility of creating a reliable and robust building automation and monitoring system, maintaining, at the same time, a character of cost-effectiveness essential for a massive spread of these technologies. A case study has been realized by taking as reference a typical home in which smart devices have been placed, aimed at equipment controlling and widespread energy consumption monitoring, both electrical and thermal. The main environmental parameters influencing energy processes are also monitored, such as: position of the windows (open/closed), temperature and humidity of the individual areas air, levels of illuminance and the presence of people in the rooms and in the entire building. These elements were then integrated into the open-source SCADA (or better personal hub) "Home Assistant" and made available on a very simple dashboard, locally accessible through any web browser. As we will see, the complete low-cost smartization of the house brings a considerable advantage on energy savings, as well as an obvious greater comfort for users.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-10
A prototype of Low-Cost Home Automation System for Energy Savings and Living Comfort
In order to put into practice the objectives proposed by the policy of energy transition towards systems and buildings increasingly electrified, smart and sustainable, the massive digitization of environments and systems in both residential and commercial plays a key role, in view of the 'internet of things'. This paper aims to demonstrate the possibility of creating a reliable and robust building automation and monitoring system, maintaining, at the same time, a character of cost-effectiveness essential for a massive spread of these technologies. A case study has been realized by taking as reference a typical home in which smart devices have been placed, aimed at equipment controlling and widespread energy consumption monitoring, both electrical and thermal. The main environmental parameters influencing energy processes are also monitored, such as: position of the windows (open/closed), temperature and humidity of the individual areas air, levels of illuminance and the presence of people in the rooms and in the entire building. These elements were then integrated into the open-source SCADA (or better personal hub) "Home Assistant" and made available on a very simple dashboard, locally accessible through any web browser. As we will see, the complete low-cost smartization of the house brings a considerable advantage on energy savings, as well as an obvious greater comfort for users.
- Open Access
- 18 January 2023
- Published by MDPI AG in Electronics
- Vol. 12 (3) , 505
Combined DC-Link Fed Parallel-VSI-Based DSTATCOM for Power Quality Improvement of a Solar DG Integrated System
In present day power systems, Power Quality (PQ) issues are causing great concern owing to the increased use of power electronic controlled drives and fluctuating and other non-linear loads. This problem is further aggravated by a steady increase in the integration of renewable energy-based Distribution Generation (DG), employing power electronic converters to distribution systems. Custom power devices with suitable control strategies provide an effective solution to these power quality issues. In this work, a typical three-phase distribution system supplying non-linear load and with DG integration is considered. A shunt connected DSTATCOM at PCC of the system is employed to mitigate power quality concerns. Initially, a parallel-VSI based DSTATCOM configuration, employing individual DC-Link and working basically on the principle of current sharing, has been proposed. The analysis is carried out for variable load conditions for PQ enhancement making use of a more effective control theory viz. Instantaneous Real-Reactive Power (IRP) theory for the generation of suitable switching patterns to the individual VSIs of the parallel DSTATCOM. Further, an improvement over the above configuration viz. combined/common DC-Link-fed parallel DSTATCOM is proposed. This configuration has the advantages of minimized sensing elements, reliable operation and low-cost compensation. A similar analysis is carried out for PQ improvement, making use of the same IRP theory with some modifications (known as MIRP theory). The effectiveness of this configuration is established from the simulation results. In all the above cases, the analyses are carried out using MATLAB/Simulink platform and the simulation results are presented in detail. Thus, the proposed parallel VSIs-based DSTATCOM configurations employing suitable control strategies provide effective solutions for power quality issues under varying load conditions in conventional distribution systems.
- 18 January 2023
- Published by MDPI AG in Electronics
- Vol. 12 (3) , 505
Open AccessCombined DC-Link Fed Parallel-VSI-Based DSTATCOM for Power Quality Improvement of a Solar DG Integrated System
In present day power systems, Power Quality (PQ) issues are causing great concern owing to the increased use of power electronic controlled drives and fluctuating and other non-linear loads. This problem is further aggravated by a steady increase in the integration of renewable energy-based Distribution Generation (DG), employing power electronic converters to distribution systems. Custom power devices with suitable control strategies provide an effective solution to these power quality issues. In this work, a typical three-phase distribution system supplying non-linear load and with DG integration is considered. A shunt connected DSTATCOM at PCC of the system is employed to mitigate power quality concerns. Initially, a parallel-VSI based DSTATCOM configuration, employing individual DC-Link and working basically on the principle of current sharing, has been proposed. The analysis is carried out for variable load conditions for PQ enhancement making use of a more effective control theory viz. Instantaneous Real-Reactive Power (IRP) theory for the generation of suitable switching patterns to the individual VSIs of the parallel DSTATCOM. Further, an improvement over the above configuration viz. combined/common DC-Link-fed parallel DSTATCOM is proposed. This configuration has the advantages of minimized sensing elements, reliable operation and low-cost compensation. A similar analysis is carried out for PQ improvement, making use of the same IRP theory with some modifications (known as MIRP theory). The effectiveness of this configuration is established from the simulation results. In all the above cases, the analyses are carried out using MATLAB/Simulink platform and the simulation results are presented in detail. Thus, the proposed parallel VSIs-based DSTATCOM configurations employing suitable control strategies provide effective solutions for power quality issues under varying load conditions in conventional distribution systems.