Charlotte Bocquelet
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Charlotte Bocquelet has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
- Quentin Stern
Northwestern University
11 shared publications - Sami Jannin
Université Claude Bernard Lyon 1
11 shared publications - Laurent Veyre
Université de Lyon Institut de Chimie de Lyon Laboratory of Catalysis Polymerization Processes and Materials CP2M UMR 5128 CNRS-UCB Lyon 1 CPE Lyon 43 Bd du 11 Novembre 1918 69616 Villeurbanne France
8 shared publications - Chloé Thieuleux
Université Lyon 1, CNRS, CPE Lyon, CP2M, UMR 5128, Villeurbanne 69616, France
7 shared publications - Ewoud Vaneeckhaute
NMRCoRe, NMR/X-Ray Platform for Convergence Research, KU Leuven, Celestijnenlaan 200F-Box 2461, B-3001 Leuven, Belgium
5 shared publications - James G. Kempf
Bruker (United States)
5 shared publications
Latest Publications
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Design and Performance of Benchtop Dynamic Nuclear Polarisation and Stopped-Flow Nuclear Magnetic Resonance Toward Rapid Cycle Hyperpolarization of Solutions
Conception et performance de systèmes de polarisation dynamique nucléaire de paillasse et de résonance magnétique nucléaire en flux interrompu en vue de l’hyperpolarisation rapide et cyclique de solutions: La résonance magnétique nucléaire (RMN) en phase liquide est une technique analytique très polyvalente et largement utilisée, reconnue pour sa robustesse et sa haute résolution dans un large éventail d'applications en chimie et biochimie. Cependant, la RMN reste fondamentalement limitée par sa faible sensibilité intrinsèque, due à la faible polarisation des spins nucléaires à l'équilibre thermique. Ce problème devient encore plus critique avec l'utilisation croissante des systèmes compacts à bas champ dits « benchtop », conçus pour simplifier l’instrumentation RMN et la rendre plus accessible, tant en termes de coût que d’intégration dans les laboratoires académiques et industriels. Pour surmonter cette limitation, des méthodes d’hyperpolarisation sont développées afin d’amplifier l’intensité du signal RMN de plusieurs ordres de grandeur, en augmentant transitoirement la polarisation des spins nucléaires au-delà de leur niveau d’équilibre thermique. Parmi ces techniques, la polarisation dynamique nucléaire avec dissolution (dDNP) se distingue par sa capacité à améliorer, jusqu’à cinq ordres de grandeur, la sensibilité d’échantillons avec des applications allant de la spectroscopie à l’imagerie. Toutefois, la dDNP est limitée par son caractère destructif et à usage unique, car l’étape de dissolution dilue l’échantillon et y introduit des contaminants chimiques, la rendant incompatible avec de nombreuses expériences RMN, notamment la RMN multidimensionnelle. Ce travail présente le développement de HypFlow DNP, une approche innovante accompagnée d'une instrumentation spécialement conçue pour fournir une méthode d’hyperpolarisation non destructive et pouvant être regénérée pour une large gamme d’échantillons liquides, au sein d’un système compact. Bien que le système HypFlow complet soit encore en cours de développement, cette thèse expose plusieurs étapes fondamentales dans sa conception et sa mise en œuvre. Au cœur du système HypFlow se trouve un polariseur DNP benchtop, fonctionnant à 1 Tesla et 77 Kelvin grâce à un aimant permanent et à un refroidissement à l’azote liquide. Développé en collaboration avec Bruker BioSpin, la conception et les performances de ce polariseur sont détaillées dans ce travail. Dans l’approche HypFlow, une fois hyperpolarisé, l’échantillon est destiné à être fondu (système de chauffage encore en développement) puis transféré via une boucle d’échantillonnage vers un spectromètre RMN de paillasse pour être analysé. La conception et la mise en œuvre du système fluidique automatisé nécessaire à ce transfert sont également présentées. Afin de permettre d’hyperpolariser l’échantillon dans la boucle d’échantillonnage plusieurs fois, HypFlow DNP s’appuie sur la DNP à l’état solide avec des radicaux (nécessaires à la DNP) immobilisés sur des matrices solides poreuses, évitant ainsi la contamination et la dilution de l’échantillon, et donc sa préservation tout au long du processus. Dans ces matrices hyperpolarisantes, la diffusion de spin et la polarisation croisée 1H-13C sont utilisées pour hyperpolariser aussi bien des solutions simples que des mélanges complexes. Nous avons étudié les performances de la DNP en utilisant ces matrices, et évalué l’applicabilité de la méthode à différents types de molécules. Enfin, nous explorons le transfert de polarisation des radicaux vers l’échantillon dans les conditions HypFlow, afin d’identifier les facteurs clés influençant l’efficacité de la DNP et de proposer des pistes d’optimisation pour améliorer les performances de la méthode.
- 8 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Design and Performance of Benchtop Dynamic Nuclear Polarisation and Stopped-Flow Nuclear Magnetic Resonance Toward Rapid Cycle Hyperpolarization of Solutions
Conception et performance de systèmes de polarisation dynamique nucléaire de paillasse et de résonance magnétique nucléaire en flux interrompu en vue de l’hyperpolarisation rapide et cyclique de solutions: La résonance magnétique nucléaire (RMN) en phase liquide est une technique analytique très polyvalente et largement utilisée, reconnue pour sa robustesse et sa haute résolution dans un large éventail d'applications en chimie et biochimie. Cependant, la RMN reste fondamentalement limitée par sa faible sensibilité intrinsèque, due à la faible polarisation des spins nucléaires à l'équilibre thermique. Ce problème devient encore plus critique avec l'utilisation croissante des systèmes compacts à bas champ dits « benchtop », conçus pour simplifier l’instrumentation RMN et la rendre plus accessible, tant en termes de coût que d’intégration dans les laboratoires académiques et industriels. Pour surmonter cette limitation, des méthodes d’hyperpolarisation sont développées afin d’amplifier l’intensité du signal RMN de plusieurs ordres de grandeur, en augmentant transitoirement la polarisation des spins nucléaires au-delà de leur niveau d’équilibre thermique. Parmi ces techniques, la polarisation dynamique nucléaire avec dissolution (dDNP) se distingue par sa capacité à améliorer, jusqu’à cinq ordres de grandeur, la sensibilité d’échantillons avec des applications allant de la spectroscopie à l’imagerie. Toutefois, la dDNP est limitée par son caractère destructif et à usage unique, car l’étape de dissolution dilue l’échantillon et y introduit des contaminants chimiques, la rendant incompatible avec de nombreuses expériences RMN, notamment la RMN multidimensionnelle. Ce travail présente le développement de HypFlow DNP, une approche innovante accompagnée d'une instrumentation spécialement conçue pour fournir une méthode d’hyperpolarisation non destructive et pouvant être regénérée pour une large gamme d’échantillons liquides, au sein d’un système compact. Bien que le système HypFlow complet soit encore en cours de développement, cette thèse expose plusieurs étapes fondamentales dans sa conception et sa mise en œuvre. Au cœur du système HypFlow se trouve un polariseur DNP benchtop, fonctionnant à 1 Tesla et 77 Kelvin grâce à un aimant permanent et à un refroidissement à l’azote liquide. Développé en collaboration avec Bruker BioSpin, la conception et les performances de ce polariseur sont détaillées dans ce travail. Dans l’approche HypFlow, une fois hyperpolarisé, l’échantillon est destiné à être fondu (système de chauffage encore en développement) puis transféré via une boucle d’échantillonnage vers un spectromètre RMN de paillasse pour être analysé. La conception et la mise en œuvre du système fluidique automatisé nécessaire à ce transfert sont également présentées. Afin de permettre d’hyperpolariser l’échantillon dans la boucle d’échantillonnage plusieurs fois, HypFlow DNP s’appuie sur la DNP à l’état solide avec des radicaux (nécessaires à la DNP) immobilisés sur des matrices solides poreuses, évitant ainsi la contamination et la dilution de l’échantillon, et donc sa préservation tout au long du processus. Dans ces matrices hyperpolarisantes, la diffusion de spin et la polarisation croisée 1H-13C sont utilisées pour hyperpolariser aussi bien des solutions simples que des mélanges complexes. Nous avons étudié les performances de la DNP en utilisant ces matrices, et évalué l’applicabilité de la méthode à différents types de molécules. Enfin, nous explorons le transfert de polarisation des radicaux vers l’échantillon dans les conditions HypFlow, afin d’identifier les facteurs clés influençant l’efficacité de la DNP et de proposer des pistes d’optimisation pour améliorer les performances de la méthode.
- Open Access
- 24 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Porous Polymers for Generating Slow Relaxing Hyperpolarization under Benchtop-DNP conditions.
Dissolution dynamic nuclear polarization (dDNP) is a hyperpolarization method providing orders-of-magnitude sensitivity boost for liquid state nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) experiments. We recently introduced a new hyperpolarization strategy based on DNP at 1 T and 77 K (instead of 7 T and 1.2 K) and demonstrated two-orders-of-magnitude signal enhancements with a compact and affordable benchtop instrumentation, designed to enable repeated hyperpolarization cycles for multi-scan NMR experiments. However, as in conventional dDNP, the required presence of paramagnetic polarizing agents for DNP is a major roadblock to melt the sample without dilution. The introduction of hyperpolarizing porous polymer (HYPOP) matrices achieved the paradoxical goal of generating fast polarization while preserving long relaxation times within the matrix. This breakthrough enabled the generation of transportable hyperpolarization for dDNP. In this study, we evaluate HYPOP under benchtop DNP conditions, demonstrating their ability to minimize paramagnetic relaxation effects before and after dilution-free melting, a key step in our benchtop DNP workflow. We report 1H signal enhancement factors exceeding 45, and 13C polarization lifetimes over 50 seconds at 77 K, and 18 seconds at 298 K, while the sample remains impregnated in the matrix. This represents a key milestone toward non-destructive melt DNP for replenishable hyperpolarized solution-state NMR.
- 24 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPorous Polymers for Generating Slow Relaxing Hyperpolarization under Benchtop-DNP conditions.
Dissolution dynamic nuclear polarization (dDNP) is a hyperpolarization method providing orders-of-magnitude sensitivity boost for liquid state nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) experiments. We recently introduced a new hyperpolarization strategy based on DNP at 1 T and 77 K (instead of 7 T and 1.2 K) and demonstrated two-orders-of-magnitude signal enhancements with a compact and affordable benchtop instrumentation, designed to enable repeated hyperpolarization cycles for multi-scan NMR experiments. However, as in conventional dDNP, the required presence of paramagnetic polarizing agents for DNP is a major roadblock to melt the sample without dilution. The introduction of hyperpolarizing porous polymer (HYPOP) matrices achieved the paradoxical goal of generating fast polarization while preserving long relaxation times within the matrix. This breakthrough enabled the generation of transportable hyperpolarization for dDNP. In this study, we evaluate HYPOP under benchtop DNP conditions, demonstrating their ability to minimize paramagnetic relaxation effects before and after dilution-free melting, a key step in our benchtop DNP workflow. We report 1H signal enhancement factors exceeding 45, and 13C polarization lifetimes over 50 seconds at 77 K, and 18 seconds at 298 K, while the sample remains impregnated in the matrix. This represents a key milestone toward non-destructive melt DNP for replenishable hyperpolarized solution-state NMR.
- Open Access
- 5 May 2025
- Published by Wiley in Chemistry–Methods
- Vol. 5 (6)
Hybrid Polarizing Solids with Extended Pore Diameters for Dissolution Dynamic Nuclear Polarization
Dissolution dynamic nuclear polarization (dDNP) has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately, their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica‐based hybrid polarizing solids (HYPSO), which have enabled the production of contamination‐free hyperpolarization. Herein, a new generation of polarizing solids with pore diameters increased from 4 up to 28 nm is presented. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of 1) providing rapid and high solid‐state polarization and improving cross‐polarization efficiency, while 2) decreasing hyperpolarization losses upon melting, transfer, and filtration, and 3) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in‐line commercial filter to retain the HYPSO powder upon dissolution and transfer.
- 5 May 2025
- Published by Wiley in Chemistry–Methods
- Vol. 5 (6)
Open AccessHybrid Polarizing Solids with Extended Pore Diameters for Dissolution Dynamic Nuclear Polarization
Dissolution dynamic nuclear polarization (dDNP) has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately, their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica‐based hybrid polarizing solids (HYPSO), which have enabled the production of contamination‐free hyperpolarization. Herein, a new generation of polarizing solids with pore diameters increased from 4 up to 28 nm is presented. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of 1) providing rapid and high solid‐state polarization and improving cross‐polarization efficiency, while 2) decreasing hyperpolarization losses upon melting, transfer, and filtration, and 3) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in‐line commercial filter to retain the HYPSO powder upon dissolution and transfer.
- 15 April 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (15)
Dynamic nuclear polarization mechanisms using TEMPOL and trityl OX063 radicals at 1 T and 77 K
A sensitivity increase of two orders of magnitude in proton (1H) and carbon (13C) spins via dynamic nuclear polarization (DNP) has been accomplished recently using a compact benchtop DNP polarizer operating at 1 T and 77 K. However, the DNP mechanisms at play at such a low magnetic field and high operating temperature are still not fully elucidated. A deeper understanding of the dominant polarization transfer mechanisms between electrons and 1H and 13C spins under these benchtop conditions is, therefore, required if one wants to devise strategies to boost sensitivity further. In this study, we found that DNP is generally dominated by solid effect (two-spin and three-spin) for narrow electron paramagnetic resonance (EPR) line radicals (15 mM trityl OX063) and cross effect for broad EPR line radicals (50 mM TEMPOL). For both radicals, the dominant DNP mechanisms were investigated varying the microwave frequency and measuring the 1H and 13C DNP enhancement factors to obtain 1H and 13C DNP spectra. The impact of varying the microwave power on the 1H DNP buildup times and the 1H nuclear spin relaxation times were important as well to distinguish between solid effect and cross effect DNP. Finally, time-resolved electron saturation simulations under continuous microwave irradiation could replicate the experimental 1H and 13C DNP spectra at 1 T and 77 K for both radicals considering their electron relaxation properties. Only for trityl OX063, the 13C DNP spectra showed additional DNP maxima compared to the simulations. This has been attributed to methyl rotor induced 1H–13C heteronuclear cross relaxation in [1–13C] acetate present at 1 T and 77 K.
- 15 April 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (15)
Dynamic nuclear polarization mechanisms using TEMPOL and trityl OX063 radicals at 1 T and 77 K
A sensitivity increase of two orders of magnitude in proton (1H) and carbon (13C) spins via dynamic nuclear polarization (DNP) has been accomplished recently using a compact benchtop DNP polarizer operating at 1 T and 77 K. However, the DNP mechanisms at play at such a low magnetic field and high operating temperature are still not fully elucidated. A deeper understanding of the dominant polarization transfer mechanisms between electrons and 1H and 13C spins under these benchtop conditions is, therefore, required if one wants to devise strategies to boost sensitivity further. In this study, we found that DNP is generally dominated by solid effect (two-spin and three-spin) for narrow electron paramagnetic resonance (EPR) line radicals (15 mM trityl OX063) and cross effect for broad EPR line radicals (50 mM TEMPOL). For both radicals, the dominant DNP mechanisms were investigated varying the microwave frequency and measuring the 1H and 13C DNP enhancement factors to obtain 1H and 13C DNP spectra. The impact of varying the microwave power on the 1H DNP buildup times and the 1H nuclear spin relaxation times were important as well to distinguish between solid effect and cross effect DNP. Finally, time-resolved electron saturation simulations under continuous microwave irradiation could replicate the experimental 1H and 13C DNP spectra at 1 T and 77 K for both radicals considering their electron relaxation properties. Only for trityl OX063, the 13C DNP spectra showed additional DNP maxima compared to the simulations. This has been attributed to methyl rotor induced 1H–13C heteronuclear cross relaxation in [1–13C] acetate present at 1 T and 77 K.
- Open Access
- 6 December 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (49) , eadq3780
Boosting 1 H and 13 C NMR signals by orders of magnitude on a bench
Sensitivity is often the Achilles’ heel of liquid-state nuclear magnetic resonance (NMR) experiments. This problem is perhaps most pressing at the lowest fields (e.g., 80-MHz 1 H frequency), with rapidly increasing access to NMR through benchtop systems, but also sometimes for higher-field NMR systems from 300 MHz to 1.2 GHz. Hyperpolarization by dissolution dynamic nuclear polarization (dDNP) can address this sensitivity limitation. However, dDNP implies massive and complex cryogenic and high-field instrumentation, which cannot be installed on the bench. We introduce here a compact helium-free 1-T tabletop polarizer as a simple and low-cost alternative. After freezing and polarizing the frozen analyte solutions at 77 K, we demonstrate 1 H signal enhancement factors of 100, with rapid 1-s buildup times. The high polarization is subsequently transferred by 1 H→ 13 C cross polarization (CP) to 13 C spins. Such a simple benchtop polarizer, in combination with hyperpolarizing solid matrices (HYPSOs), may open the way to replenishable hyperpolarization throughout multiple liquid-state NMR experiments.
- 6 December 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (49) , eadq3780
Open AccessBoosting 1 H and 13 C NMR signals by orders of magnitude on a bench
Sensitivity is often the Achilles’ heel of liquid-state nuclear magnetic resonance (NMR) experiments. This problem is perhaps most pressing at the lowest fields (e.g., 80-MHz 1 H frequency), with rapidly increasing access to NMR through benchtop systems, but also sometimes for higher-field NMR systems from 300 MHz to 1.2 GHz. Hyperpolarization by dissolution dynamic nuclear polarization (dDNP) can address this sensitivity limitation. However, dDNP implies massive and complex cryogenic and high-field instrumentation, which cannot be installed on the bench. We introduce here a compact helium-free 1-T tabletop polarizer as a simple and low-cost alternative. After freezing and polarizing the frozen analyte solutions at 77 K, we demonstrate 1 H signal enhancement factors of 100, with rapid 1-s buildup times. The high polarization is subsequently transferred by 1 H→ 13 C cross polarization (CP) to 13 C spins. Such a simple benchtop polarizer, in combination with hyperpolarizing solid matrices (HYPSOs), may open the way to replenishable hyperpolarization throughout multiple liquid-state NMR experiments.
- Open Access
- 7 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Dissolution-DNP enables the detection of 13C hyperpolarized NMR spectra of Li-ion battery electrolytes
Dissolution Dynamic Nuclear Polarization (dDNP) is a powerful hyperpolarization technique enabling sensitivity gains beyond four orders of magnitude in solution nuclear magnetic resonance (NMR). Over the last decades, researchers’ efforts have led to an extension of dDNP applications in fields such as imaging, metabolomics, and drug discovery. Lithium-ion batteries are one of the most widespread types of rechargeable batteries, which calls for a deeper understanding of the various physicochemical mechanisms involved in making them more efficient, safe, and sustainable. One of the key challenges lies in better understanding and limiting the degradation of the battery electrolyte, which can significantly impact the battery’s performance. While NMR has been used in attempts to understand these mechanisms, notably by investigating the degradation products, the intrinsic lack of sensitivity of this technique, combined with the limited accessible volume of such compounds, makes its application often challenging. In this work, we combine several state-of-the-art dDNP methodologies to acquire with high sensitivity solution 13C NMR spectra of battery electrolytes. We show that we can successfully detect hyperpolarized 13C signals on formulated battery electrolyte solutions on a 600 MHz spectrometer with sensitivity gains of up to 3 orders of magnitude. This work paves the way for studying lithium-ion battery electrolyte degradation under real usage conditions (cycling, thermal aging, air exposure…) with a 13C detection limit below the micromolar range. This methodology has the potential to provide new insights into degradation mechanisms and the role and effectiveness of additives to mitigate electrolyte degradation.
- 7 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDissolution-DNP enables the detection of 13C hyperpolarized NMR spectra of Li-ion battery electrolytes
Dissolution Dynamic Nuclear Polarization (dDNP) is a powerful hyperpolarization technique enabling sensitivity gains beyond four orders of magnitude in solution nuclear magnetic resonance (NMR). Over the last decades, researchers’ efforts have led to an extension of dDNP applications in fields such as imaging, metabolomics, and drug discovery. Lithium-ion batteries are one of the most widespread types of rechargeable batteries, which calls for a deeper understanding of the various physicochemical mechanisms involved in making them more efficient, safe, and sustainable. One of the key challenges lies in better understanding and limiting the degradation of the battery electrolyte, which can significantly impact the battery’s performance. While NMR has been used in attempts to understand these mechanisms, notably by investigating the degradation products, the intrinsic lack of sensitivity of this technique, combined with the limited accessible volume of such compounds, makes its application often challenging. In this work, we combine several state-of-the-art dDNP methodologies to acquire with high sensitivity solution 13C NMR spectra of battery electrolytes. We show that we can successfully detect hyperpolarized 13C signals on formulated battery electrolyte solutions on a 600 MHz spectrometer with sensitivity gains of up to 3 orders of magnitude. This work paves the way for studying lithium-ion battery electrolyte degradation under real usage conditions (cycling, thermal aging, air exposure…) with a 13C detection limit below the micromolar range. This methodology has the potential to provide new insights into degradation mechanisms and the role and effectiveness of additives to mitigate electrolyte degradation.
- 31 October 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (49)
Dynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid‐state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near‐unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid‐state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1 H polarizations of up to 5 %. We also show that 13 C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid‐state DNP in conductive polymers that are known to exhibit chirality‐induced spin selectivity.
- 31 October 2024
- Published by Wiley in Angewandte Chemie
- Vol. 136 (49)
Dynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid‐state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near‐unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid‐state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1 H polarizations of up to 5 %. We also show that 13 C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid‐state DNP in conductive polymers that are known to exhibit chirality‐induced spin selectivity.
- 31 October 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (49) , e202409510
Dynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid‐state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near‐unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid‐state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1 H polarizations of up to 5 %. We also show that 13 C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid‐state DNP in conductive polymers that are known to exhibit chirality‐induced spin selectivity.
- 31 October 2024
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 63 (49) , e202409510
Dynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid‐state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near‐unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid‐state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1 H polarizations of up to 5 %. We also show that 13 C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid‐state DNP in conductive polymers that are known to exhibit chirality‐induced spin selectivity.
- Open Access
- 10 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Hybrid Polarizing Solids with Extended Pore Diameters for Dissolution Dynamic Nuclear Polarization
Dissolution dynamic nuclear polarization has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica-based hybrid polarizing solids (HYPSO), which have enabled the production of contamination-free hyperpolarization. Here, we present a new generation of polarizing solids with pore diameters increased from 4 nm up to 28 nm. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of i) providing rapid and high solid-state polarization and improving cross-polarization efficiency, while ii) decreasing hyperpolarization losses upon melting, transfer, and filtration, and iii) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in-line commercial filter to retain the HYPSO powder upon dissolution and transfer.
- 10 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHybrid Polarizing Solids with Extended Pore Diameters for Dissolution Dynamic Nuclear Polarization
Dissolution dynamic nuclear polarization has emerged as a powerful technique to address the inherent sensitivity limitations in nuclear magnetic resonance imaging and spectroscopy. The technique relies on the use of stable paramagnetic polarizing agents that act as a source of hyperpolarization but unfortunately their presence contaminates the sample and significantly enhances paramagnetic relaxation of the hyperpolarized solutions. In the last decade, novel sample formulations have been proposed to combat this issue, including silica-based hybrid polarizing solids (HYPSO), which have enabled the production of contamination-free hyperpolarization. Here, we present a new generation of polarizing solids with pore diameters increased from 4 nm up to 28 nm. Compared to the previously described HYPSOs with smaller pore sizes of 4 nm, larger pores ultimately achieve the ambitious contradictory goals of i) providing rapid and high solid-state polarization and improving cross-polarization efficiency, while ii) decreasing hyperpolarization losses upon melting, transfer, and filtration, and iii) reducing the overall concentration of the polarizing agent by a factor of 2. These HYPSO materials can be used in virtually any existing dDNP settings without modification, apart from the sole addition of an in-line commercial filter to retain the HYPSO powder upon dissolution and transfer.
- Open Access
- 12 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Dynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid-state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near-unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid-state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1H polarizations of up to 5%. We also show that 13C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid-state DNP in conductive polymers that are known to exhibit chirality-induced spin selectivity.
- 12 September 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDynamic Nuclear Polarization with Conductive Polymers
The low sensitivity of liquid-state nuclear magnetic resonance (NMR) can be overcome by hyperpolarizing nuclear spins by dissolution dynamic nuclear polarization (dDNP). It consists of transferring the near-unity polarization of unpaired electron spins of stable radicals to the nuclear spins of interest at liquid helium temperatures, below 2 K, before melting the sample in view of hyperpolarized liquid-state magnetic resonance experiments. Reaching such a temperature is challenging and requires complex instrumentation, which impedes the deployment of dDNP. Here, we propose organic conductive polymers such as polyaniline (PANI) as a new class of polarizing matrices and report 1H polarizations of up to 5%. We also show that 13C spins of a host solution impregnated in porous conductive polymers can be hyperpolarized by relayed DNP. Such conductive polymers can be synthesized as chiral and display current induced spin selectivity leading to electron spin hyperpolarization close to unity without the need for low temperatures nor high magnetic fields. Our results show the feasibility of solid-state DNP in conductive polymers that are known to exhibit chirality-induced spin selectivity.