Christopher Edward Wilson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christopher Edward Wilson has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Maarten van Reeuwijk
Department of civil and environmental engineering Imperial College London London UK
19 shared publications - Dipanjan Majumdar
Department of Civil and Environmental Engineering, Imperial College London, London SW7 2AZ, United Kingdom
16 shared publications Paul Bartholomew
16 shared publications- Sam Oliver Owens
Department of Civil and Environmental Engineering, Imperial College London, London SW7 2AZ, United Kingdom
16 shared publications Athanasios Paschalis
Department of civil and environmental engineering Imperial College London London UK
2 shared publications- Athanasios Paschalis
University of Cyprus
1 shared publication
Latest Publications
- Open Access
- 18 March 2026
- Published by Wiley in Quarterly Journal of the Royal Meteorological Society
- Vol. 152 (777) , e70154
Parameter investigation for urban surface‐energy balance: A large‐eddy simulation study
- 18 March 2026
- Published by Wiley in Quarterly Journal of the Royal Meteorological Society
- Vol. 152 (777) , e70154
Open AccessParameter investigation for urban surface‐energy balance: A large‐eddy simulation study
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
Impact of Shading on Urban Surface Energy Balance and Microclimate
Understanding how urban surfaces exchange energy with the atmosphere is crucial for predicting microclimate variability and improving urban resilience. This study investigates the role of shading distribution on the surface energy balance (SEB) in urban environments at both micro- and neighborhood scales. Using the building-resolving large-eddy simulation (LES) code uDALES, we model a realistic vegetated urban setting under convective conditions. Two solar zenith angles (0° and 45°) are considered while maintaining constant incoming shortwave radiation to isolate shading effects.Our results show that shading significantly influences local SEB fluxes, particularly net shortwave radiation and sensible heat flux, which differ by approximately 424 Wm⁻² and 277 Wm⁻², respectively, between shaded and sunlit surfaces. Despite these variations, domain-averaged SEB fluxes remain largely unchanged, except for latent heat flux, which is 22% higher when the sun is directly overhead. Additionally, while the mean radiant temperature (MRT) varies only slightly between cases (ΔMRT = 0.19 K), localized effects are substantial: unshaded areas at 45° zenith experience MRT values up to 10 K higher due to increased radiative contributions from walls.These findings highlight the critical influence of shading distribution on urban microclimates, emphasizing the need for high-resolution modeling in climate-sensitive urban planning. By explicitly resolving shading effects, this work advances our understanding of urban thermal dynamics and provides valuable insights for improving thermal comfort and reducing heat stress in cities.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessImpact of Shading on Urban Surface Energy Balance and Microclimate
Understanding how urban surfaces exchange energy with the atmosphere is crucial for predicting microclimate variability and improving urban resilience. This study investigates the role of shading distribution on the surface energy balance (SEB) in urban environments at both micro- and neighborhood scales. Using the building-resolving large-eddy simulation (LES) code uDALES, we model a realistic vegetated urban setting under convective conditions. Two solar zenith angles (0° and 45°) are considered while maintaining constant incoming shortwave radiation to isolate shading effects.Our results show that shading significantly influences local SEB fluxes, particularly net shortwave radiation and sensible heat flux, which differ by approximately 424 Wm⁻² and 277 Wm⁻², respectively, between shaded and sunlit surfaces. Despite these variations, domain-averaged SEB fluxes remain largely unchanged, except for latent heat flux, which is 22% higher when the sun is directly overhead. Additionally, while the mean radiant temperature (MRT) varies only slightly between cases (ΔMRT = 0.19 K), localized effects are substantial: unshaded areas at 45° zenith experience MRT values up to 10 K higher due to increased radiative contributions from walls.These findings highlight the critical influence of shading distribution on urban microclimates, emphasizing the need for high-resolution modeling in climate-sensitive urban planning. By explicitly resolving shading effects, this work advances our understanding of urban thermal dynamics and provides valuable insights for improving thermal comfort and reducing heat stress in cities.
- Open Access
- 21 May 2025
- Published by Copernicus GmbH
uDALES: a high-fidelity multi-physics large-eddy simulation framework for urban microclimate modelling
UDALES is an open-source, multi-physics microclimate modelling framework specifically developed for studying outdoor urban environments. It performs the large-eddy simulation (LES) of airflow while accounting for the heat transfer (sensible and latent), moisture, and pollutant dispersion within the urban atmospheric boundary layer at microscale resolution. The framework employs a novel conservative immersed boundary method (IBM) to resolve complex urban geometries, represented via a triangulated surface with a resolution independent of the Cartesian computational grid. This offers greater flexibility and accuracy in representing realistic urban structures. The interaction between the urban surfaces and the surrounding airflow is incorporated in the IBM using wall functions for surface shear stresses and heat fluxes. The latter are two-way coupled with a surface energy balance model that takes into account net short and long-wave radiation and ground heat conduction, with the capability to accommodate both man-made and vegetative materials. uDALES is also capable of modelling the drag introduced by trees in urban areas and their influence on modifying the local wind flow and pollutant dispersion. Recent advancements in uDALES have enabled two-dimensional domain decomposition via the 2DECOMP&FFT library, facilitating efficient parallelization and optimized use of supercomputing resources such as ARCHER2, thereby preparing for exascale computing. Several validation exercises have been conducted on idealized cases, including neutral flow over staggered urban-like structures, flow over a single tree and over tree arrays, cross-ventilation of an isolated building, and non-neutral flow over a single cube that is misaligned with the computational grid. The results demonstrate strong agreement with experimental and numerical benchmarks, highlighting the code’s accuracy and efficiency. With its enhanced functionality, uDALES (https://github.com/uDALES/u-dales) is a robust tool for high-resolution LES studies of urban environments, supporting advanced research in urban atmospheric and environmental sciences.
- 21 May 2025
- Published by Copernicus GmbH
Open AccessuDALES: a high-fidelity multi-physics large-eddy simulation framework for urban microclimate modelling
UDALES is an open-source, multi-physics microclimate modelling framework specifically developed for studying outdoor urban environments. It performs the large-eddy simulation (LES) of airflow while accounting for the heat transfer (sensible and latent), moisture, and pollutant dispersion within the urban atmospheric boundary layer at microscale resolution. The framework employs a novel conservative immersed boundary method (IBM) to resolve complex urban geometries, represented via a triangulated surface with a resolution independent of the Cartesian computational grid. This offers greater flexibility and accuracy in representing realistic urban structures. The interaction between the urban surfaces and the surrounding airflow is incorporated in the IBM using wall functions for surface shear stresses and heat fluxes. The latter are two-way coupled with a surface energy balance model that takes into account net short and long-wave radiation and ground heat conduction, with the capability to accommodate both man-made and vegetative materials. uDALES is also capable of modelling the drag introduced by trees in urban areas and their influence on modifying the local wind flow and pollutant dispersion. Recent advancements in uDALES have enabled two-dimensional domain decomposition via the 2DECOMP&FFT library, facilitating efficient parallelization and optimized use of supercomputing resources such as ARCHER2, thereby preparing for exascale computing. Several validation exercises have been conducted on idealized cases, including neutral flow over staggered urban-like structures, flow over a single tree and over tree arrays, cross-ventilation of an isolated building, and non-neutral flow over a single cube that is misaligned with the computational grid. The results demonstrate strong agreement with experimental and numerical benchmarks, highlighting the code’s accuracy and efficiency. With its enhanced functionality, uDALES (https://github.com/uDALES/u-dales) is a robust tool for high-resolution LES studies of urban environments, supporting advanced research in urban atmospheric and environmental sciences.
- Open Access
- 26 February 2025
- Published by Elsevier in Building and Environment
- Vol. 275
Microscale to neighbourhood scale: Impact of shading on urban climate
- 26 February 2025
- Published by Elsevier in Building and Environment
- Vol. 275
Open AccessMicroscale to neighbourhood scale: Impact of shading on urban climate
- Open Access
- 26 August 2024
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 17 (16) , 6277-6300
A conservative immersed boundary method for the multi-physics urban large-eddy simulation model uDALES v2.0
UDALES is an open-source multi-physics microscale urban modelling tool, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: (1) an improved parallelisation that prepares the codebase for conducting exascale simulations and (2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal–external flows and non-neutral cases. We observe close agreement with the relevant literature, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non-grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a grid-aligned geometry.
- 26 August 2024
- Published by Copernicus GmbH in Geoscientific Model Development
- Vol. 17 (16) , 6277-6300
Open AccessA conservative immersed boundary method for the multi-physics urban large-eddy simulation model uDALES v2.0
UDALES is an open-source multi-physics microscale urban modelling tool, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: (1) an improved parallelisation that prepares the codebase for conducting exascale simulations and (2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal–external flows and non-neutral cases. We observe close agreement with the relevant literature, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non-grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a grid-aligned geometry.
- Open Access
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Reply on RC6
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Open AccessReply on RC6
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- Open Access
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Reply on RC3
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Open AccessReply on RC3
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- Open Access
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Reply on RC1
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Open AccessReply on RC1
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- Open Access
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Reply on RC2
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- 30 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Open AccessReply on RC2
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- Open Access
- 27 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Reply on RC5
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.
- 27 May 2024
- Published by Copernicus GmbH
- Vol. 2024, 1-33
Open AccessReply on RC5
UDALES is an open-source multi-physics microscale urban modelling framework, capable of performing large-eddy simulation (LES) of urban airflow, heat transfer, and pollutant dispersion. We present uDALES v2.0, which has two main new features: 1) an improved parallelisation that prepares the codebase for conducting exascale simulations; and 2) a conservative immersed boundary method (IBM) suitable for an urban surface that does not need to be aligned with the underlying Cartesian grid. The urban geometry and local topography are incorporated via a triangulated surface with a resolution that is independent of the fluid grid. The IBM developed here includes the use of wall functions to apply surface fluxes, and the exchange of heat and moisture between the surface and the air is conservative by construction. We perform a number of validation simulations, ranging from neutral, coupled internal-external flows and non-neutral cases. Good agreement is observed, both in cases in which the buildings are aligned with the Cartesian grid and when they are at an angle. We introduce a validation case specifically for urban applications, for which we show that supporting non grid-aligned geometries is crucial when solving surface energy balances, with errors of up to 20 % associated with using a previous version of uDALES.