Edoardo Mantecca
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Edoardo Mantecca has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Ghidoni
Department of Mechanical and Industrial Engineering, University of Brescia , via Branze 38, Brescia 25123
5 shared publications - Gianmaria Noventa
Department of Mechanical and Industrial Engineering, University of Brescia , via Branze 38, Brescia 25123
5 shared publications A. Ghidoni
2 shared publications- Alessandro Colombo
Department of Engineering and Applied Sciences, University of Bergamo, viale Marconi 5, 24044 Dalmine, Italy
2 shared publications Antonio Ghidoni
University of Brescia, Department of Mechanical and Industrial Engineering, via Branze 38, Brescia 25123, Italy
2 shared publications- David Pasquale
Turboden S.p.A, Via Cernaia 10, 25124 Brescia, Italy
2 shared publications
Latest Publications
- 15 July 2026
- Published by Elsevier in Journal of Computational Physics
- Vol. 565
Cut cell discontinuous Galerkin solution of the Euler equations with divergence-based numerical quadrature
- 15 July 2026
- Published by Elsevier in Journal of Computational Physics
- Vol. 565
Cut cell discontinuous Galerkin solution of the Euler equations with divergence-based numerical quadrature
- Open Access
- 1 February 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3173 (1)
Influence of wall temperature on separation-induced transition with non-ideal flows
Many technologies are used to control the behavior of the flow in both industrial and research applications. An important goal is the possibility to anticipate or delay the laminar-to-turbulent transition in boundary and shear layers. In shear layers, the separation-induced transition process is controlled by instabilities such as Kelvin–Helmholtz, Tollmien–Schlichting and streaks. In this work, the transitional flow over a rounded leading-edge flat plate is investigated under different ideal and non-ideal free-stream flow and wall conditions, where the separation of the boundary layer is geometry-induced. The numerical simulations are carried out with implicit large-eddy simulation and a discontinuous Galerkin discretization of the Navier–Stokes equations with a high-order accuracy both in time and space. Different free-stream Reynolds numbers and turbulence intensities are considered, with adiabatic and cooled and heated isothermal walls. Literature about transition with a non-ideal behavior of the flow is poor, where thermophysical and transport properties show large variations. This allows to maximize the influence of the isothermal wall temperature. The results demonstrate different flow phenomena in the transition process. For example, in the case with non-ideal free-stream flow conditions and cooled isothermal walls, the length of the laminar-separation-bubble is up to half that in the case with ideal free-stream flow conditions and an adiabatic wall.
- 1 February 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3173 (1)
Open AccessInfluence of wall temperature on separation-induced transition with non-ideal flows
Many technologies are used to control the behavior of the flow in both industrial and research applications. An important goal is the possibility to anticipate or delay the laminar-to-turbulent transition in boundary and shear layers. In shear layers, the separation-induced transition process is controlled by instabilities such as Kelvin–Helmholtz, Tollmien–Schlichting and streaks. In this work, the transitional flow over a rounded leading-edge flat plate is investigated under different ideal and non-ideal free-stream flow and wall conditions, where the separation of the boundary layer is geometry-induced. The numerical simulations are carried out with implicit large-eddy simulation and a discontinuous Galerkin discretization of the Navier–Stokes equations with a high-order accuracy both in time and space. Different free-stream Reynolds numbers and turbulence intensities are considered, with adiabatic and cooled and heated isothermal walls. Literature about transition with a non-ideal behavior of the flow is poor, where thermophysical and transport properties show large variations. This allows to maximize the influence of the isothermal wall temperature. The results demonstrate different flow phenomena in the transition process. For example, in the case with non-ideal free-stream flow conditions and cooled isothermal walls, the length of the laminar-separation-bubble is up to half that in the case with ideal free-stream flow conditions and an adiabatic wall.
- 24 November 2025
- Published by Elsevier in Computers & Fluids
- Vol. 306
Intermittency-based transition models for different flow conditions in a high-order framework
- 24 November 2025
- Published by Elsevier in Computers & Fluids
- Vol. 306
Intermittency-based transition models for different flow conditions in a high-order framework
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
High-order simulations of non-ideal flows with efficient control of temporal and spatial accuracy
This work presents the simulation of complex transonic/supersonic viscous flows with non-ideal compressible conditions with a high-order accuracy both in time and space. The computational efficiency of a solver based on a discontinuous Galerkin spatial discretization is increased with algorithms to adapt the polynomial degree of the solution over the mesh and the time step-size during the simulation, i.e., the p- and Δt-adaptation algorithms. The proposed implementation of these algorithms and non-ideal equations of state allows a further decrease in the computational cost of the simulations. The look-up-tables are used instead of the direct resolution of the non-ideal equations of state and are generated after each adaptation of the polynomial degree of the solution to increase the accuracy of the interpolation of the thermodynamic variables/derivatives. If the flow phenomenon is steady, the Δt-adaptation algorithm is able to reach the convergence of pseudo-unsteady simulations with a computational cost comparable to that of steady simulations and an efficient time integration. Furthermore, a spectral filter is used on the dual graph of the mesh after each adaptation of the polynomial degree of the solution to decrease the differences in the polynomial degree between neighboring elements. The accuracy and computational efficiency of different variables used in the error estimator for the p-adaptation algorithm, i.e., pressure, temperature, velocity magnitude, speed of sound, entropy, and the fundamental derivative of gas dynamics, are compared on simulations with different free-stream and wall conditions, equations of state, and governing equations. The results also demonstrate the influence of negative values of the fundamental derivative of gas dynamics and cold-wall conditions on flow phenomena such as shock/boundary-layer interaction and buffet/vortex shedding.
- 1 September 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (9)
High-order simulations of non-ideal flows with efficient control of temporal and spatial accuracy
This work presents the simulation of complex transonic/supersonic viscous flows with non-ideal compressible conditions with a high-order accuracy both in time and space. The computational efficiency of a solver based on a discontinuous Galerkin spatial discretization is increased with algorithms to adapt the polynomial degree of the solution over the mesh and the time step-size during the simulation, i.e., the p- and Δt-adaptation algorithms. The proposed implementation of these algorithms and non-ideal equations of state allows a further decrease in the computational cost of the simulations. The look-up-tables are used instead of the direct resolution of the non-ideal equations of state and are generated after each adaptation of the polynomial degree of the solution to increase the accuracy of the interpolation of the thermodynamic variables/derivatives. If the flow phenomenon is steady, the Δt-adaptation algorithm is able to reach the convergence of pseudo-unsteady simulations with a computational cost comparable to that of steady simulations and an efficient time integration. Furthermore, a spectral filter is used on the dual graph of the mesh after each adaptation of the polynomial degree of the solution to decrease the differences in the polynomial degree between neighboring elements. The accuracy and computational efficiency of different variables used in the error estimator for the p-adaptation algorithm, i.e., pressure, temperature, velocity magnitude, speed of sound, entropy, and the fundamental derivative of gas dynamics, are compared on simulations with different free-stream and wall conditions, equations of state, and governing equations. The results also demonstrate the influence of negative values of the fundamental derivative of gas dynamics and cold-wall conditions on flow phenomena such as shock/boundary-layer interaction and buffet/vortex shedding.
- 9 September 2024
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 254
Assessment of the Delayed Extra-LES model for the aerodynamics of simplified automotive models
- 9 September 2024
- Published by Elsevier in Journal of Wind Engineering and Industrial Aerodynamics
- Vol. 254
Assessment of the Delayed Extra-LES model for the aerodynamics of simplified automotive models
- Open Access
- 8 March 2024
- Published by Elsevier in Journal of Computational Physics
- Vol. 505
Efficient implementation of complex equations of state in a high-order framework
- 8 March 2024
- Published by Elsevier in Journal of Computational Physics
- Vol. 505
Open AccessEfficient implementation of complex equations of state in a high-order framework
- Open Access
On the Development of an Implicit Discontinuous Galerkin Solver for Turbulent Real Gas Flows
The aim of this work is to describe an efficient implementation of cubic and multiparameter real gas models in an existing discontinuous Galerkin solver to extend its capabilities to the simulation of turbulent real gas flows. The adopted thermodynamic models are van der Waals, Peng–Robinson, and Span–Wagner, which differ from each other in terms of accuracy and computational cost. Convective numerical fluxes across elements interfaces are calculated with a thermodynamic consistent linearized Riemann solver, whereas for boundary conditions, a linearized expression of the generalized Riemann invariants is employed. Transport properties are treated as temperature- and density-dependent quantities through multiparameter correlations. An implicit time integration is adopted; Jacobian matrix and thermodynamic derivatives are obtained with the automatic differentiation tool Tapenade. The solver accuracy is assessed by computing both steady and unsteady real gas test cases available in the literature, and the effect of the mesh size and polynomial degree of approximation on the solution accuracy is investigated. A good agreement with experimental and numerical reference data is observed and specific non-classical phenomena are well reproduced by the solver.
Open AccessOn the Development of an Implicit Discontinuous Galerkin Solver for Turbulent Real Gas Flows
The aim of this work is to describe an efficient implementation of cubic and multiparameter real gas models in an existing discontinuous Galerkin solver to extend its capabilities to the simulation of turbulent real gas flows. The adopted thermodynamic models are van der Waals, Peng–Robinson, and Span–Wagner, which differ from each other in terms of accuracy and computational cost. Convective numerical fluxes across elements interfaces are calculated with a thermodynamic consistent linearized Riemann solver, whereas for boundary conditions, a linearized expression of the generalized Riemann invariants is employed. Transport properties are treated as temperature- and density-dependent quantities through multiparameter correlations. An implicit time integration is adopted; Jacobian matrix and thermodynamic derivatives are obtained with the automatic differentiation tool Tapenade. The solver accuracy is assessed by computing both steady and unsteady real gas test cases available in the literature, and the effect of the mesh size and polynomial degree of approximation on the solution accuracy is investigated. A good agreement with experimental and numerical reference data is observed and specific non-classical phenomena are well reproduced by the solver.
- Open Access
- 1 January 2023
- Published by European Turbomachinery Society
Non-ideal compressible-fluid dynamics simulations in orc turbines with a discontinuous galerkin solver
This work aims to show the new capabilities implemented in an in-house Discontinuous Galerkin (DG) solver [1] for the CFD simulation of Organic Rankine Cycles’ (ORCs) turbine stages. The Reynolds averaged Navier–Stokes equations coupled with the two equations k-log(ω) turbulence model are solved to predict the flow features in a multi reference frame, where interfaces between fixed and rotating zones are treated with a mixing plane approach [2] and non-reflecting boundary conditions are used. The thermal pressure-explicit equation of state (EoS) of Peng-Robinson is used to accurately relate thermodynamic quantities and is supplemented by a polynomial description of the ideal gas contribution to the isobaric specific heat. The dynamic viscosity and thermal conductivity are computed with Chung’s model. The solver has been assessed with the computation of the flow field through an existing axial ORC turbine (2 stages) provided by Turboden. The working fluid is the linear siloxane MDM (C8H24O2Si3). In particular, the influence on the solution’s accuracy of different aspects will be investigated, which are: the polynomial degree of the solution’s approximation, the mesh spacing and the employed thermodynamic model. The predicted results will be compared with numerical data provided by Turboden, obtained with a commercial CFD code. [1] Bassi, F. and Botti, L. and Colombo, A. and Crivellini, A. and Franchina, N. and Ghidoni, A. Assessment of a high-order accurate Discontinuous Galerkin method for turbomachinery flows. International Journal of Computational Fluid Dynamics (2016) 30:307–328. [2] Saxer, A.P. and Giles, M.B. Quasi-three-dimensional nonreflecting boundary conditions for Euler equations calculations. Journal of Propulsion and Power, (1993) 9:263–271.
- 1 January 2023
- Published by European Turbomachinery Society
Open AccessNon-ideal compressible-fluid dynamics simulations in orc turbines with a discontinuous galerkin solver
This work aims to show the new capabilities implemented in an in-house Discontinuous Galerkin (DG) solver [1] for the CFD simulation of Organic Rankine Cycles’ (ORCs) turbine stages. The Reynolds averaged Navier–Stokes equations coupled with the two equations k-log(ω) turbulence model are solved to predict the flow features in a multi reference frame, where interfaces between fixed and rotating zones are treated with a mixing plane approach [2] and non-reflecting boundary conditions are used. The thermal pressure-explicit equation of state (EoS) of Peng-Robinson is used to accurately relate thermodynamic quantities and is supplemented by a polynomial description of the ideal gas contribution to the isobaric specific heat. The dynamic viscosity and thermal conductivity are computed with Chung’s model. The solver has been assessed with the computation of the flow field through an existing axial ORC turbine (2 stages) provided by Turboden. The working fluid is the linear siloxane MDM (C8H24O2Si3). In particular, the influence on the solution’s accuracy of different aspects will be investigated, which are: the polynomial degree of the solution’s approximation, the mesh spacing and the employed thermodynamic model. The predicted results will be compared with numerical data provided by Turboden, obtained with a commercial CFD code. [1] Bassi, F. and Botti, L. and Colombo, A. and Crivellini, A. and Franchina, N. and Ghidoni, A. Assessment of a high-order accurate Discontinuous Galerkin method for turbomachinery flows. International Journal of Computational Fluid Dynamics (2016) 30:307–328. [2] Saxer, A.P. and Giles, M.B. Quasi-three-dimensional nonreflecting boundary conditions for Euler equations calculations. Journal of Propulsion and Power, (1993) 9:263–271.