Sukanto Halder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sukanto Halder has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Mominur Rahaman
Northern University of Business and Technology Khulna
3 shared publications - Omer Faruk
Northern University of Business and Technology Khulna
3 shared publications - Shehab Uddin Shahriar
Northern University of Business and Technology Khulna
3 shared publications - Sohel Rana
Khulna University of Engineering and Technology
3 shared publications - Abdulla- Al- Mamun
Northern University of Business and Technology Khulna
2 shared publications - Abdul Ahad
Washington University of Science and Technology
1 shared publication
Latest Publications
- Open Access
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (6) , 5422-5432
Designing, developing and analyzing of a rectangular-shaped patch antenna at 3.5 GHz for 5G applications at S band
This research study focuses on the design and analysis of two distinct patch antennas for 5G applications at 3.5 GHz. Rogers RT5880 served as the foundational material for antenna designs I and II. A 50 Ω feed line is utilized to supply both antennas. According to the calculations, Design I exhibits a reflection coefficient (S11) of -32.98 dB, a voltage standing wave ratio of 1.045, a gain of 7.81 dBi, an efficiency of 89.2%, and a surface current of 66.82 A/V. Design II has a reflection coefficient (S11) of 34.98 dB, voltage standing wave ratio (VSWR) of 1.036, gain of 8.78 dBi, efficiency of 89.87%, and surface current of 62.7 A/V. Among the two antenna designs, design II outperformed design I, and the results indicate that the antenna fulfilled the designated purpose. The novelties of the proposed paper are to design two different patch antennas using same materials and highlight the performance of the design parameters. Design II is proficient in supporting 5G services owing to its advantageous performance. In addition, S11 of the antenna is reduced to bring the VSWR value is close to 1. Also, improve gain, directivity and efficiency by bringing the antenna impedance matching close to 50 Ω.
- 1 December 2025
- Published by Institute of Advanced Engineering and Science in International Journal of Electrical and Computer Engineering (IJECE)
- Vol. 15 (6) , 5422-5432
Open AccessDesigning, developing and analyzing of a rectangular-shaped patch antenna at 3.5 GHz for 5G applications at S band
This research study focuses on the design and analysis of two distinct patch antennas for 5G applications at 3.5 GHz. Rogers RT5880 served as the foundational material for antenna designs I and II. A 50 Ω feed line is utilized to supply both antennas. According to the calculations, Design I exhibits a reflection coefficient (S11) of -32.98 dB, a voltage standing wave ratio of 1.045, a gain of 7.81 dBi, an efficiency of 89.2%, and a surface current of 66.82 A/V. Design II has a reflection coefficient (S11) of 34.98 dB, voltage standing wave ratio (VSWR) of 1.036, gain of 8.78 dBi, efficiency of 89.87%, and surface current of 62.7 A/V. Among the two antenna designs, design II outperformed design I, and the results indicate that the antenna fulfilled the designated purpose. The novelties of the proposed paper are to design two different patch antennas using same materials and highlight the performance of the design parameters. Design II is proficient in supporting 5G services owing to its advantageous performance. In addition, S11 of the antenna is reduced to bring the VSWR value is close to 1. Also, improve gain, directivity and efficiency by bringing the antenna impedance matching close to 50 Ω.
- 22 October 2025
- Published by Springer Nature
- p. 841-859
Design and Development of Diverse Patch Antennas for 5G Wireless Networks
- 22 October 2025
- Published by Springer Nature
- p. 841-859
Design and Development of Diverse Patch Antennas for 5G Wireless Networks
- Open Access
- 1 April 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 34 (1) , 383-395
For wireless LAN application, microstrip patch antenna design in S-band
This article presents a 3.5 GHz rectangular microstrip patch antenna (RMPA) designed, studied, and analyzed for wireless LAN applications. Using Fr-4 as substrate material, whose dielectric permittivity is 4.3, patch thickness is 1.65 mm, and loss tangent is 0.025. A feeding line with an impedance of 50 Ω is utilized to supply the antenna with power. Computer simulation technology (CST) software has been used to design the antenna and origin pro software has been used to display the resulting figures from the simulation. The antenna simulation showed that the return loss is -56.82 dB; the directivity gain is 6.02 dBi, the bandwidth is 0.148 GHz, and the voltage standing wave ratio (VSWR) is 1.0028. The paper aims to increase the return loss, develop a standard VSWR, increase the directivity gain of the antenna, and improve the antenna bandwidth. The results of the proposed antenna were much better than previously published papers, which were suitable for wireless applications. This proposed antenna can be used for future wireless LAN applications.
- 1 April 2024
- Published by Institute of Advanced Engineering and Science in Indonesian Journal of Electrical Engineering and Computer Science
- Vol. 34 (1) , 383-395
Open AccessFor wireless LAN application, microstrip patch antenna design in S-band
This article presents a 3.5 GHz rectangular microstrip patch antenna (RMPA) designed, studied, and analyzed for wireless LAN applications. Using Fr-4 as substrate material, whose dielectric permittivity is 4.3, patch thickness is 1.65 mm, and loss tangent is 0.025. A feeding line with an impedance of 50 Ω is utilized to supply the antenna with power. Computer simulation technology (CST) software has been used to design the antenna and origin pro software has been used to display the resulting figures from the simulation. The antenna simulation showed that the return loss is -56.82 dB; the directivity gain is 6.02 dBi, the bandwidth is 0.148 GHz, and the voltage standing wave ratio (VSWR) is 1.0028. The paper aims to increase the return loss, develop a standard VSWR, increase the directivity gain of the antenna, and improve the antenna bandwidth. The results of the proposed antenna were much better than previously published papers, which were suitable for wireless applications. This proposed antenna can be used for future wireless LAN applications.