Methene Briones Cutad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Methene Briones Cutad has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Anand Kumar
Department of Chemical Engineering College of Engineering Qatar University Doha Qatar
5 shared publications - Mohammed Jaber Al-Marri
Department of Chemical Engineering, College of Engineering, Qatar University, Doha P.O. Box 2713, Qatar
4 shared publications Mohammed J. Al‐Marri
Department of Chemical Engineering College of Engineering Qatar University Doha Qatar
1 shared publicationParisa Ebrahimi
Department of Chemical Engineering College of Engineering Qatar University Doha Qatar
1 shared publication- Parisa Ebrahimi
Department of Chemical Engineering, College of Engineering, Qatar University, Doha P.O. Box 2713, Qatar
1 shared publication - Parisa Ebrahimi
Department of Chemical Engineering, College of Engineering, Qatar University, P. O. Box 2713, Doha, Qatar
1 shared publication
Latest Publications
- Open Access
Multiscale Thermodynamic and Exergetic Assessment of Tri-Reforming of Methane for CO2 Valorization and Process Intensification
Tri-reforming of methane (TRM) has emerged as a promising pathway for low-carbon syngas production by integrating steam reforming, dry reforming, and partial oxidation within a single process. This coupling enables simultaneous CH4 utilization and CO2 valorization while enabling internal heat generation and flexible adjustment of the H2/CO ratio for downstream synthesis. However, TRM performance cannot be adequately evaluated using conversion or energy efficiency alone, because the process involves complex interactions among competing reaction pathways, transport phenomena, catalyst stability, and thermodynamic irreversibility. This review provides a multiscale critical assessment of TRM from both first-law energy and second-law exergy perspectives, linking reaction-network fundamentals to reactor-level behavior and system-level performance. The literature evidence shows that although high temperatures and near-autothermal operation can enhance CH4 conversion and reduce external heat demand, these conditions may simultaneously intensify deep oxidation, hotspot formation, carbon-forming tendencies, and exergy destruction. While equilibrium analyses help define feasible operating windows, they are insufficient without kinetic modeling and reactor-scale studies that capture spatial non-uniformities and pathway competition. Across reported TRM systems, exergy destruction is consistently concentrated within the reformer, identifying the reacting core as the dominant thermodynamic bottleneck. Accordingly, the key challenge in TRM is not simply to maximize conversion but to preserve chemical work potential while maintaining syngas quality and operational stability. Viewed from this perspective, TRM is better understood as an irreversibility-aware multiscale design problem in which optimal performance depends on the integrated optimization of catalyst functionality, reactor architecture, heat management, and system-level operation.
Open AccessMultiscale Thermodynamic and Exergetic Assessment of Tri-Reforming of Methane for CO2 Valorization and Process Intensification
Tri-reforming of methane (TRM) has emerged as a promising pathway for low-carbon syngas production by integrating steam reforming, dry reforming, and partial oxidation within a single process. This coupling enables simultaneous CH4 utilization and CO2 valorization while enabling internal heat generation and flexible adjustment of the H2/CO ratio for downstream synthesis. However, TRM performance cannot be adequately evaluated using conversion or energy efficiency alone, because the process involves complex interactions among competing reaction pathways, transport phenomena, catalyst stability, and thermodynamic irreversibility. This review provides a multiscale critical assessment of TRM from both first-law energy and second-law exergy perspectives, linking reaction-network fundamentals to reactor-level behavior and system-level performance. The literature evidence shows that although high temperatures and near-autothermal operation can enhance CH4 conversion and reduce external heat demand, these conditions may simultaneously intensify deep oxidation, hotspot formation, carbon-forming tendencies, and exergy destruction. While equilibrium analyses help define feasible operating windows, they are insufficient without kinetic modeling and reactor-scale studies that capture spatial non-uniformities and pathway competition. Across reported TRM systems, exergy destruction is consistently concentrated within the reformer, identifying the reacting core as the dominant thermodynamic bottleneck. Accordingly, the key challenge in TRM is not simply to maximize conversion but to preserve chemical work potential while maintaining syngas quality and operational stability. Viewed from this perspective, TRM is better understood as an irreversibility-aware multiscale design problem in which optimal performance depends on the integrated optimization of catalyst functionality, reactor architecture, heat management, and system-level operation.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
Effect of La 2 O 3 –CeO 2 support composition on NiCu catalysts for the reverse water–gas shift reaction through a Scheffé mixture model and structure–function analysis
The reverse water–gas shift (RWGS) performance of 1 wt% NiCu catalysts supported on La 2 O 3 –CeO 2 mixed oxides was investigated to determine how support composition affects activity, selectivity, apparent kinetics, and performance retention.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
Effect of La 2 O 3 –CeO 2 support composition on NiCu catalysts for the reverse water–gas shift reaction through a Scheffé mixture model and structure–function analysis
The reverse water–gas shift (RWGS) performance of 1 wt% NiCu catalysts supported on La 2 O 3 –CeO 2 mixed oxides was investigated to determine how support composition affects activity, selectivity, apparent kinetics, and performance retention.
- 19 August 2025
- Published by Wiley in Greenhouse Gases: Science and Technology
- Vol. 15 (5) , 542-557
Synergistic Promotion of Ni/La 2 O 3 Catalysts by Copper for Efficient Dry Reforming of Methane
The catalytic performance of Ni/La 2 O 3 and Ni–Cu/La 2 O 3 for dry reforming of methane (DRM) was investigated, focusing on reducibility, stability, and coke resistance. Cu incorporation lowered the Ni reduction temperature, as revealed by temperature‐programmed reduction (TPR), enhancing hydrogen spillover and oxygen vacancy formation. X‐ray photoelectron spectroscopy (XPS) confirms that Cu stabilizes the oxygen lattice, minimizes carbonate accumulation, and facilitates CO 2 activation. Catalytic tests at 850°C demonstrated 78% CH 4 conversion and 96% CO 2 conversion for Ni–Cu/La 2 O 3 , compared to 55% and 72% for Ni/La 2 O 3 , respectively. X‐ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) confirmed that Cu prevents Ni sintering, maintaining high dispersion. Carbon deposition analysis showed 0.50 wt.% total carbon for Ni–Cu/La 2 O 3 , slightly higher than Ni/La 2 O 3 (0.42 wt.%), but with a 40% reduction in graphitic carbon. The synergistic effect between Cu and Ni optimizes Ni dispersion, modulates electronic properties, and weakens Ni–La 2 O 3 interactions, improving CH 4 activation and carbon removal. Ni–Cu/La 2 O 3 exhibits outstanding activity and resistance to deactivation, making it a highly effective and stable catalyst for CO 2 conversion and syngas production in DRM, with a strong synergy between Ni and Cu, along with the stabilizing influence of the La 2 O 3 support, enhancing its overall performance and durability.
- 19 August 2025
- Published by Wiley in Greenhouse Gases: Science and Technology
- Vol. 15 (5) , 542-557
Synergistic Promotion of Ni/La 2 O 3 Catalysts by Copper for Efficient Dry Reforming of Methane
The catalytic performance of Ni/La 2 O 3 and Ni–Cu/La 2 O 3 for dry reforming of methane (DRM) was investigated, focusing on reducibility, stability, and coke resistance. Cu incorporation lowered the Ni reduction temperature, as revealed by temperature‐programmed reduction (TPR), enhancing hydrogen spillover and oxygen vacancy formation. X‐ray photoelectron spectroscopy (XPS) confirms that Cu stabilizes the oxygen lattice, minimizes carbonate accumulation, and facilitates CO 2 activation. Catalytic tests at 850°C demonstrated 78% CH 4 conversion and 96% CO 2 conversion for Ni–Cu/La 2 O 3 , compared to 55% and 72% for Ni/La 2 O 3 , respectively. X‐ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) confirmed that Cu prevents Ni sintering, maintaining high dispersion. Carbon deposition analysis showed 0.50 wt.% total carbon for Ni–Cu/La 2 O 3 , slightly higher than Ni/La 2 O 3 (0.42 wt.%), but with a 40% reduction in graphitic carbon. The synergistic effect between Cu and Ni optimizes Ni dispersion, modulates electronic properties, and weakens Ni–La 2 O 3 interactions, improving CH 4 activation and carbon removal. Ni–Cu/La 2 O 3 exhibits outstanding activity and resistance to deactivation, making it a highly effective and stable catalyst for CO 2 conversion and syngas production in DRM, with a strong synergy between Ni and Cu, along with the stabilizing influence of the La 2 O 3 support, enhancing its overall performance and durability.
- Open Access
- 2 July 2025
- Published by Taylor & Francis in Catalysis Reviews
- Vol. 68 (4) , 915-977
Direct transformation of Carbon Dioxide to aromatics as high-value liquid fuels via the modified fischer-Tropsch synthesis and Methanol-mediated routes
- 2 July 2025
- Published by Taylor & Francis in Catalysis Reviews
- Vol. 68 (4) , 915-977
Open AccessDirect transformation of Carbon Dioxide to aromatics as high-value liquid fuels via the modified fischer-Tropsch synthesis and Methanol-mediated routes
- Open Access
Recent Developments on CO2 Hydrogenation Performance over Structured Zeolites: A Review on Properties, Synthesis, and Characterization
This review focuses on an extensive synopsis of the recent improvements in CO2 hydrogenation over structured zeolites, including their properties, synthesis methods, and characterization. Key features such as bimodal mesoporous structures, surface oxygen vacancies, and the Si/Al ratio are explored for their roles in enhancing catalytic activity. Additionally, the impact of porosity, thermal stability, and structural integrity on the performance of zeolites, as well as their interactions with electrical and plasma environments, are discussed in detail. The synthesis of structured zeolites is analyzed by comparing the advantages and limitations of bottom-up methods, including hard templating, soft templating, and non-templating approaches, to top-down methods, such as dealumination, desilication, and recrystallization. The review addresses the challenges associated with these synthesis techniques, such as pore-induced diffusion limitations, morphological constraints, and maintaining crystal integrity, highlighting the need for innovative solutions and optimization strategies. Advanced characterization techniques are emphasized as essential for understanding the catalytic mechanisms and dynamic behaviors of zeolites, thereby facilitating further research into their efficient and effective use. The study concludes by underscoring the importance of continued research to refine synthesis and characterization methods, which is crucial for optimizing catalytic activity in CO2 hydrogenation. This effort is important for achieving selective catalysis and is paramount to the global initiative to reduce carbon emissions and address climate change.
Open AccessRecent Developments on CO2 Hydrogenation Performance over Structured Zeolites: A Review on Properties, Synthesis, and Characterization
This review focuses on an extensive synopsis of the recent improvements in CO2 hydrogenation over structured zeolites, including their properties, synthesis methods, and characterization. Key features such as bimodal mesoporous structures, surface oxygen vacancies, and the Si/Al ratio are explored for their roles in enhancing catalytic activity. Additionally, the impact of porosity, thermal stability, and structural integrity on the performance of zeolites, as well as their interactions with electrical and plasma environments, are discussed in detail. The synthesis of structured zeolites is analyzed by comparing the advantages and limitations of bottom-up methods, including hard templating, soft templating, and non-templating approaches, to top-down methods, such as dealumination, desilication, and recrystallization. The review addresses the challenges associated with these synthesis techniques, such as pore-induced diffusion limitations, morphological constraints, and maintaining crystal integrity, highlighting the need for innovative solutions and optimization strategies. Advanced characterization techniques are emphasized as essential for understanding the catalytic mechanisms and dynamic behaviors of zeolites, thereby facilitating further research into their efficient and effective use. The study concludes by underscoring the importance of continued research to refine synthesis and characterization methods, which is crucial for optimizing catalytic activity in CO2 hydrogenation. This effort is important for achieving selective catalysis and is paramount to the global initiative to reduce carbon emissions and address climate change.