Siwei Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Siwei Liu has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Lin Yang
State Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
6 shared publications - Xin Fu
State Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
5 shared publications Yujie Huo
Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
4 shared publications- Chuang Cheng
State Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China
3 shared publications - Shanglin Yang
Xidian University
3 shared publications Jiaqi Niu
Key Laboratory of Optoelectronic Materials and Devices, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China
2 shared publications
Latest Publications
- 24 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (2) , 719-725
Fabrication-Friendly Shape Optimization for Lithium Niobate Nanophotonics Based on Levelset Method
Lithium niobate on insulator (LNOI) has received much attention in recent years due to its excellent material properties, such as low optical loss, strong nonlinearities and high index contrast, possessing great potential in future nanophotonic devices and systems. However, most of current LNOI devices are designed by traditional physical models and inefficient parameter sweeps, which limit their performance and functionality. In this paper, we propose an inverse design methodology that introduces the levelset method to achieve ultra-compact, high-performance, and readily manufacturable LNOI devices. The levelset method offers a flexible and natural representation of device contours. In addition, it also yields simply-connected device structures (no holes, islands and gaps) that are robust to fabrication errors. We also factor in crystal anisotropy, ridge feature and sidewall angle of LN waveguide to substantially improve simulation accuracy. Using this methodology, we design and fabricate a waveguide crossing and a mode multiplexer, both of which exhibit ultra-compact footprints, simply-connected device contours and consistency between simulation and experimental results. Our design method can be applied to a wide range of LNOI devices and nanophotonic platforms with similar material properties and fabrication constraints, paving the way toward future integrated optical chips and nonlinear technologies.
- 24 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (2) , 719-725
Fabrication-Friendly Shape Optimization for Lithium Niobate Nanophotonics Based on Levelset Method
Lithium niobate on insulator (LNOI) has received much attention in recent years due to its excellent material properties, such as low optical loss, strong nonlinearities and high index contrast, possessing great potential in future nanophotonic devices and systems. However, most of current LNOI devices are designed by traditional physical models and inefficient parameter sweeps, which limit their performance and functionality. In this paper, we propose an inverse design methodology that introduces the levelset method to achieve ultra-compact, high-performance, and readily manufacturable LNOI devices. The levelset method offers a flexible and natural representation of device contours. In addition, it also yields simply-connected device structures (no holes, islands and gaps) that are robust to fabrication errors. We also factor in crystal anisotropy, ridge feature and sidewall angle of LN waveguide to substantially improve simulation accuracy. Using this methodology, we design and fabricate a waveguide crossing and a mode multiplexer, both of which exhibit ultra-compact footprints, simply-connected device contours and consistency between simulation and experimental results. Our design method can be applied to a wide range of LNOI devices and nanophotonic platforms with similar material properties and fabrication constraints, paving the way toward future integrated optical chips and nonlinear technologies.
- 16 August 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 181
Inverse-designed compact silicon waveguide reflector for on-chip resonators
- 16 August 2024
- Published by Elsevier in Optics & Laser Technology
- Vol. 181
Inverse-designed compact silicon waveguide reflector for on-chip resonators
- 30 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (24) , 8793-8801
Ultra-Compact On-Chip Silicon Photonic Polarization- and Wavelength-Selective Switch
Silicon-based optical switches are indispensable for on-chip optical interconnects and have become essential components of optical neural networks and optical computing. Although broadband Mach–Zehnder interferometer (MZI) switches have been widely studied, they are large in size and difficult to implement wavelength or polarization selection functions at the switching element (SE) level. Here, we introduce a novel design for a polarization- and wavelength-selective switch on the standard silicon-on-insulator (SOI) platform, composed of mode-coupled micro-ring (MR) switches, polarization rotators (PRs), and mode exchangers (MEs). Parallel-cascaded MR switches facilitate the expansion of wavelength channels, while PRs and MEs enable two polarizations to route separately through two sets of MR switches without the need for polarization splitting. As a proof of concept, we demonstrate an ultra-compact 2 × 2 × 3λ × 2P (TE & TM) SE with full spatial, spectral, and polarization switching capabilities. Experimental results show that the insertion losses are less than 1.1 dB, and the crosstalk is better than −17 dB around 1550 nm. Additionally, all channels’ 3 dB optical bandwidth is over 60 GHz, and characterization with 50 Gbps on-off keying (OOK) modulated signals demonstrates aggregate throughput up to 600 Gbps.
- 30 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (24) , 8793-8801
Ultra-Compact On-Chip Silicon Photonic Polarization- and Wavelength-Selective Switch
Silicon-based optical switches are indispensable for on-chip optical interconnects and have become essential components of optical neural networks and optical computing. Although broadband Mach–Zehnder interferometer (MZI) switches have been widely studied, they are large in size and difficult to implement wavelength or polarization selection functions at the switching element (SE) level. Here, we introduce a novel design for a polarization- and wavelength-selective switch on the standard silicon-on-insulator (SOI) platform, composed of mode-coupled micro-ring (MR) switches, polarization rotators (PRs), and mode exchangers (MEs). Parallel-cascaded MR switches facilitate the expansion of wavelength channels, while PRs and MEs enable two polarizations to route separately through two sets of MR switches without the need for polarization splitting. As a proof of concept, we demonstrate an ultra-compact 2 × 2 × 3λ × 2P (TE & TM) SE with full spatial, spectral, and polarization switching capabilities. Experimental results show that the insertion losses are less than 1.1 dB, and the crosstalk is better than −17 dB around 1550 nm. Additionally, all channels’ 3 dB optical bandwidth is over 60 GHz, and characterization with 50 Gbps on-off keying (OOK) modulated signals demonstrates aggregate throughput up to 600 Gbps.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (22) , 1313-1316
Dual-Mode Variable Optical Attenuator Based on Balanced Multimode Power Splitters on SOI Platform
We designed and experimentally demonstrated the dual-mode variable optical attenuator on the silicon-on-insulator platform. The mode-insensitive Mach-Zehnder interferometer structure is achieved by optimizing the initial phase difference, the splitting coefficient of dual-mode splitters, and the thermal modulation efficiency of the phase shifters, ensuring synchronous attenuation of the ${\mathrm {TE}}_{0}$ and ${\mathrm {TE}}_{1}$ modes. At 1550 nm wavelength, experimental results show that the maximum attenuation depths of ${\mathrm {TE}}_{0}$ and ${\mathrm {TE}}_{1}$ modes are 31.33 dB and 20.81 dB, respectively, with driving powers of 23.4 mW and 22.1 mW. Additionally, the measured response time of both modes is under $26~\mu $ s. The device is promising for applications in mode-insensitive optical interconnects.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (22) , 1313-1316
Dual-Mode Variable Optical Attenuator Based on Balanced Multimode Power Splitters on SOI Platform
We designed and experimentally demonstrated the dual-mode variable optical attenuator on the silicon-on-insulator platform. The mode-insensitive Mach-Zehnder interferometer structure is achieved by optimizing the initial phase difference, the splitting coefficient of dual-mode splitters, and the thermal modulation efficiency of the phase shifters, ensuring synchronous attenuation of the ${\mathrm {TE}}_{0}$ and ${\mathrm {TE}}_{1}$ modes. At 1550 nm wavelength, experimental results show that the maximum attenuation depths of ${\mathrm {TE}}_{0}$ and ${\mathrm {TE}}_{1}$ modes are 31.33 dB and 20.81 dB, respectively, with driving powers of 23.4 mW and 22.1 mW. Additionally, the measured response time of both modes is under $26~\mu $ s. The device is promising for applications in mode-insensitive optical interconnects.
- Open Access
- 4 July 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (20) , 3855-3866
Demultiplexing‐free ultra‐compact WDM‐compatible multimode optical switch assisted by mode exchanger
Silicon‐based optical switches are integral to on‐chip optical interconnects, and mode‐division multiplexing (MDM) technology has enabled modes to function as carriers in routing, further boosting optical switches’ link capacity. However, traditional multimode optical switches, which typically use Mach–Zehnder interferometer (MZI) structures and mode (de)multiplexers, are complex and occupy significant physical space. In this paper, we propose and experimentally demonstrate a novel demultiplexing‐free dual‐mode 3 × 3 thermal‐optical switch based on micro‐rings (MRs) and mode exchangers (MEs). All MRs are designed to handle TE 1 mode, while the ME converts TE 0 mode to TE 1 mode, enabling separate routing of both modes. Bezier curves are employed to optimize not only the ME, but also the dual‐mode 45° and 90° waveguide bends, which facilitate the flexible and compact layout design. Moreover, our structure can support multiple wavelength channels and spacings by adding pairs of MRs, exhibiting strong WDM compatibility. The switch has an ultra‐compact footprint of 0.87 × 0.52 mm 2 . Under both “all‐bar” and “all‐cross” configurations, its insertion losses (ILs) remain below 8.7 dB at 1,551 nm, with optical signal‐to‐noise ratios (OSNRs) exceeding 13.0 dB. Also, 32 Gbps data transmission experiments validate the switch’s high‐speed transmission capability.
- 4 July 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (20) , 3855-3866
Open AccessDemultiplexing‐free ultra‐compact WDM‐compatible multimode optical switch assisted by mode exchanger
Silicon‐based optical switches are integral to on‐chip optical interconnects, and mode‐division multiplexing (MDM) technology has enabled modes to function as carriers in routing, further boosting optical switches’ link capacity. However, traditional multimode optical switches, which typically use Mach–Zehnder interferometer (MZI) structures and mode (de)multiplexers, are complex and occupy significant physical space. In this paper, we propose and experimentally demonstrate a novel demultiplexing‐free dual‐mode 3 × 3 thermal‐optical switch based on micro‐rings (MRs) and mode exchangers (MEs). All MRs are designed to handle TE 1 mode, while the ME converts TE 0 mode to TE 1 mode, enabling separate routing of both modes. Bezier curves are employed to optimize not only the ME, but also the dual‐mode 45° and 90° waveguide bends, which facilitate the flexible and compact layout design. Moreover, our structure can support multiple wavelength channels and spacings by adding pairs of MRs, exhibiting strong WDM compatibility. The switch has an ultra‐compact footprint of 0.87 × 0.52 mm 2 . Under both “all‐bar” and “all‐cross” configurations, its insertion losses (ILs) remain below 8.7 dB at 1,551 nm, with optical signal‐to‐noise ratios (OSNRs) exceeding 13.0 dB. Also, 32 Gbps data transmission experiments validate the switch’s high‐speed transmission capability.
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 571-574
Ultra-Compact Inverse Designed Multimode Waveguide Bend Based on Levelset Method
Mode-division multiplexing (MDM) technology can expand transimission capacity of a communication system and multimode waveguide bend (MWB) is a vital component. However, the reported MWBs either occupy large footprints or require complex fabrication steps. In this letter, the levelset method and adjoint method are combined to achieve an ultracompact three-mode MWB with an effective radius of 4.4 $\mu {\mathrm{ m}}$ . The MWB structure can be defined by levelset method which projects a three dimensional (3D) surface into a two dimensional (2D) curve. Moreover, the efficient evolution of the MWB structure are guaranteed by the adjoint method, this method only requires two simulations to derive the derivative of the figure of merit (FOM) with respect to design parameters. The simulation results of our MWB reveals that the average insertion losses for TE0, TE1 and TE2 modes are 0.04 dB,0.06 dB and 0.07 dB, respectively. In addition, the intermode crosstalks are all below −21dB in a wide spectral range from 1500 nm to 1600 nm. The MWB is also fabricated on a commerical silicon-on-insulator (SOI) wafer, the experimental spectra show that the insertion losses for three modes are 0.28 dB, 0.25 dB and 0.18 dB, the crosstalks between those modes are less than −13.4 dB across the wavelength range from 1525 nm to 1600 nm. The design methods can be applied not only to various nanophotonic components but also to other material platforms.
- 22 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 36 (8) , 571-574
Ultra-Compact Inverse Designed Multimode Waveguide Bend Based on Levelset Method
Mode-division multiplexing (MDM) technology can expand transimission capacity of a communication system and multimode waveguide bend (MWB) is a vital component. However, the reported MWBs either occupy large footprints or require complex fabrication steps. In this letter, the levelset method and adjoint method are combined to achieve an ultracompact three-mode MWB with an effective radius of 4.4 $\mu {\mathrm{ m}}$ . The MWB structure can be defined by levelset method which projects a three dimensional (3D) surface into a two dimensional (2D) curve. Moreover, the efficient evolution of the MWB structure are guaranteed by the adjoint method, this method only requires two simulations to derive the derivative of the figure of merit (FOM) with respect to design parameters. The simulation results of our MWB reveals that the average insertion losses for TE0, TE1 and TE2 modes are 0.04 dB,0.06 dB and 0.07 dB, respectively. In addition, the intermode crosstalks are all below −21dB in a wide spectral range from 1500 nm to 1600 nm. The MWB is also fabricated on a commerical silicon-on-insulator (SOI) wafer, the experimental spectra show that the insertion losses for three modes are 0.28 dB, 0.25 dB and 0.18 dB, the crosstalks between those modes are less than −13.4 dB across the wavelength range from 1525 nm to 1600 nm. The design methods can be applied not only to various nanophotonic components but also to other material platforms.