LLLin Lin

Lin Lin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lin Lin has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Experimental and simulation study on air gap streamer discharge at low temperature

    by Xiaobo Meng, Zhiyuan Zhu, Weisheng Zhuang, Lin Lin, Hongwei Mei, Liming Wang

    The UHV AC and DC transmission lines across low temperature and cold areas necessitates the adjustment of UHV insulation design to ensure safe and stable operation. The issue of flashover along the outer insulation surface at low temperatures has been extensively discussed, yet there remains a lack of understanding regarding the mechanism of streamer discharge in such environments. The stable control of temperature, humidity, air pressure, and other environmental parameters is achieved in this study through the utilization of a cold box and dry air system. Additionally, the characteristics of streamer discharge in low-temperature environments are measured using advanced equipment such as photomultiplier tube PMT and high-speed camera ICCD. Furthermore, a fluid model is employed to establish a simulation model for streamer discharge in low-temperature environments, with simulation results demonstrating consistency with experimental findings. The experimental and simulation results demonstrate that the progression of streamer discharge is impeded by low temperatures. Moreover, a decrease in temperature necessitates a higher electric field for the advancement of streamer discharge, resulting in a reduced propagation velocity of the streamers. Investigating the mechanism of streamer discharge in low temperature environments is crucial for comprehending and revealing the mechanisms behind surface discharge under these conditions, ultimately leading to improved design standards for external insulation in low temperature environments.


  • Characteristics of Positive Streamer Discharge versus Atmospheric Humidity in a Three-Electrode Configuration

    by Xiaobo Meng, Weisheng Zhuang, Lin Lin, Hongwei Mei, Liming Wang

    With large-scale offshore wind power connected to the main power grid, the high humidity environment of offshore wind power equipment has attracted more and more attention from researchers. It is very important for the safe and reliable operation of offshore wind power system to study the air gap discharge in high humidity environment. In the paper, the influence of the humidity on the streamer discharge in the air was conducted by experimental research and simulation research. At the different humidity, the streamer stable propagation field and streamer propagation velocity were measured under quasi-uniform background electric field. A fluid simulation model for streamer discharge was established, the influence of the humidity on various parameters during the development of streamer discharge was studied, and the mechanism of streamer discharge varying with humidity was analysed. With the increase of the humidity, the streamer stable propagation field increased, and the streamer propagation velocity decreased under the same electric field. The simulation results of streamer stable propagation field and streamer propagation velocity were in good agreement with the experimental results by choosing an appropriate streamer channel diameter. Therefore, an empirical formula for the variation of the streamer channel diameter with the electric field under different humidity conditions was obtained by fitting the simulation data. It should be noted that the results and the extracted effective-diameter correlation are specific to the present three-electrode configuration and the investigated humidity and electric-field ranges.


  • The Influence of the Air Pressure on the Positive Streamer Discharge in the Air

    by Xiaobo Meng, Lin Lin, Hongwei Mei, Liming Wang

    The UHV DC transmission lines under construction and planning have long distances, and most of them have to cross high-altitude and low-pressure areas. In order to make the external insulation of the equipment operate normally in a high-altitude and low-pressure environment, the influence mechanism of air pressure on the flashover along the insulation surface has always been a hot issue in the field of high-voltage external insulation. This paper studies the influence of the air pressure on the streamer discharge in the air. A three-electrode arrangement is used to generate a uniform electric field to measure the streamer discharge characteristics, and a fluid simulation model is acquired to analyze the streamer discharge mechanism. The relationship between the air pressure and the streamer discharge characteristics is researched deeply. The streamer stable propagation field is positively correlated with air pressure, and the streamer propagation velocity is negatively correlated with air pressure. The relationship between the streamer channel diameter and the air pressure is established, which provides a theoretical basis for the accurate simulation calculation of streamer discharge characteristics under low pressure.


  • Top Cited Papers

    Characteristic of Surface Streamer Discharge Under the AC–DC Composite Voltage

    by Xiaobo Meng, Lin Lin, Hao Li, Hongwei Mei, Liming Wang

    The external insulation of the equipment in the valve hall of UHV DC converter station must be able to withstand AC-DC combined voltage influences. Investigating the surface discharge characteristics of external insulation under AC-DC combined voltage is currently a significant research topic. The investigation into the surface streamer characteristics under AC-DC combined voltage is instrumental in elucidating the mechanism of surface flashover. The streamer characteristics of different phases in a single cycle under AC-DC combined voltage were determined by conducting surface streamer discharge tests. The relationship between surface streamer characteristics and different phases under AC-DC combined voltage was summarized. By comparing the test results of surface streamer discharge under DC voltage, this study analyzed the effect mechanism of AC-DC combined voltage on surface streamer characteristics. The directional motion of space charge under AC-DC combined voltage was identified as the primary determinant of surface streamer characteristics.


  • Characteristics of Streamer Discharge in SF6 Gas Under Different Pressures

    by Xiaobo Meng, Weisheng Zhuang, Lin Lin, Hao Li, Zhenhong Cao, Hongwei Mei

    SF 6 is widely used in GIS equipment due to its good insulation properties and high chemical reliability. As a common form of gas discharge, streamer discharge can cause severe damage to the insulation performance. Therefore, the study of the discharge characteristics of streamers in SF 6 gas has practical solid engineering value. There are significant differences in the streamer propagation process in SF 6 gas with different pressures. Aiming at the influence of pressure on the characteristics of streamer discharge, this paper establishes a simulation model of streamer discharge for SF 6 gas based on numerical computation. It systematically studies the characteristics of streamer discharge in SF 6 gas with different pressures. The results show that high-pressure SF 6 gas is less likely to propagate the streamer because of the weaker ionization of particles in high-pressure SF 6 , leading to a reduction in the number of charged particles at the streamer head as well as a reduction in the strength of the electric field at the streamer head. In addition, the equations for the streamer steady propagation electric field and the diameter of the streamer channel as a function of pressure were fitted, respectively.


  • Influence of Intense Vertical Component Electric Field With the Direction Away From Insulation Surface on Streamer Discharge

    by Xiaobo Meng, Lin Lin, Hao Li, Hongwei Mei, Zhong Wang

    The surface discharge along the valve side bushing could directly result in single-pole or even bipolar shutdown of the UHVDC project, leading to a significant power grid operation accident. The AC-DC combined voltage and intense vertical component electric field exert a significant influence on the design of the external insulation of the valve side bushing. The paper presented measurements of the stable propagation fields, velocities, and luminous intensity of the streamer discharge in a three-electrode device subjected to combined AC-DC voltage and an intense vertical component electric field directed away from the insulation surface. The propagation of the streamer discharge was inhibited by the intense vertical component electric field directed away from the insulation surface, increased stable propagation field and reduced propagation velocity. The length of the embedded electrode specifically influenced the magnitude of the vertical component electric field along the dielectric surface, thereby significantly impacting the progression of streamer discharge. The influence mechanism of the electric field distribution and ionization effect was investigated to explore the characteristics of streamer discharge under intense vertical component electric fields directed away from the insulation surface. The sliding flashover discharge mechanism along the valve side bushing belonging to the UHVDC converter transformer was elucidated and explicated from the streamer discharge perspective.


  • Mechanism of Positive Streamer Discharge Under Intense Vertical Component Electric Field

    by Lin Lin, Xiaobo Meng, Hongwei Mei, Liming Wang

    The valve side bushing of the converter transformer must withstand the influence of AC-DC combined voltage and intense vertical component electric field during operation, of which the design is a challenging and significant problem in the design of UHV external insulation. The investigation of surface discharge on insulated structures subjected to AC-DC composite voltage and intense vertical component electric field is significant for the design of major equipment in UHV DC engineering. In this paper, characteristics of positive streamer discharge under influence of AC-DC combined voltage and intense vertical component electric field was studied deeply. The stable propagation field of the positive streamer discharge was observed to be lower under an intense vertical component electric field compared to that in its absence. The streamer propagation velocity in the 'surface' component was higher under intense vertical component electric field compared to that without, while the propagation velocity in the 'air' component was lower. It was concluded that the intense vertical component electric field enhanced the secondary electron emission and the photoinduced secondary electron emission from the dielectric material, thereby facilitating the progression of surface streamer discharge. The research findings were instrumental in elucidating the mechanism underlying sliding flashover discharge along dielectric materials under the intense vertical component electric field.


  • Top Cited Papers

    Characteristics of Streamer Discharge Along the Insulation Surface With Embedded Electrode

    by Xiaobo Meng, Lin Lin, Hao Li, Yiduan Chen, Hongwei Mei

    Surface discharge was a common accident in power systems, significantly impacting the safe and stable operation of the power grid. The insulation structure of power equipment was intricate, and surface discharge characteristics were influenced not only by the insulation material but also by electrode geometry. In the paper, characteristics of streamer discharge along the insulation surface with embedded electrode were investigated under negative DC voltage. The streamer propagation field, velocity, and luminous intensity, were measured by photomultiplier tubes and ICCD camera. Unexpectedly, the disparity in the characteristics of streamer discharge along the insulation surface, with and without an embedded electrode, was substantial. Furthermore, the investigation also revealed that the length of the embedded electrode has a significant influence on the characteristics of surface streamer discharge. Through analysis, it had been determined that the presence of the embedded electrode did not significantly impact the electric field along the insulation surface. However, it had an influence on the charge distribution on the insulation surface, consequently affecting the characteristics of surface steamer discharge. The findings from this research would provide valuable technical support for enhancing external insulation design and operation strategies in DC bushings and other related equipment.