Yuhui Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuhui Zhang has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Chen Zhuang
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
1 shared publicationDongfa Qiao
Key Laboratory of Functional Materials and Applications of Fujian Province, Xiamen University of Technology, Xiamen, China
1 shared publication- Jingjing Sun
Fujian Province Key Laboratory of Functional Materials and Applications, Xiamen University of Technology, Xiamen 361024, China
1 shared publication - Lili Ma
Fujian Province Key Laboratory of Functional Materials and Applications, Xiamen University of Technology, Xiamen 361024, China
1 shared publication Muyuan Chai
School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
1 shared publication- Pengmin Jia
Fujian Province Key Laboratory of Functional Materials and Applications, Xiamen University of Technology, Xiamen 361024, China
1 shared publication
Latest Publications
- 3 May 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (31) , 1-18
Improving Alloy Mechanical Property Prediction by Addressing Data Homogeneity through Noise Augmentation
- 3 May 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (31) , 1-18
Improving Alloy Mechanical Property Prediction by Addressing Data Homogeneity through Noise Augmentation
- Open Access
Preparation of Ultrafine Co- and Ni-Coated (Ti,W,Mo,Ta)(C,N) Powders and Their Influence on the Microstructure of Ti(C,N)-Based Cermets
The use of metal-coated ceramic powders not only effectively enhances the wettability of the metal–ceramic interface but also promotes a more uniform microstructure in Ti(C,N)-based cermets, which is advantageous for improving their mechanical properties. In this study, ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders were synthesized via the spray-drying-in-situ carbothermal reduction method. Subsequently, Ti(C,N)-based cermets were effectively fabricated using the as-prepared ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders. The impact of reaction temperature, heating rate, and isothermal time on the phase and microstructure of prepared powders was analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Additionally, the microstructure of the as-sintered cermets was experimentally investigated. The findings reveal that the complete reduction of Co and Ni metal salts, pre-coated on the surface of (Ti,W,Mo,Ta)(C,N) particles, can be achieved through rapid heating (10 °C/min) in a specific temperature range (600–1000 °C) with an isothermal time of 3 h at a lower reduction temperature (1000 °C). The synthesized powders have only two phases: the (Ti,W,Mo,Ta)(C,N) phase and Co/Ni phase, and no other heterogeneous phases were observed with an oxygen content of 0.261 wt.%. Notably, the conventional core–rim structure was not dominant in the cermets obtained from the prepared Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders. Moreover, the heterogeneous segregation effect of the Co/Ni coating on the ultrafine powder particles resulted in a finer microstructure than the traditional cermets with the same composition. However, the grain size is mainly in the range of 0.5–0.8 μm. The weaker residual stresses at the core and rim interfaces and the finer particle distributions could theoretically enhance the toughness of Ti(C,N)-based cermets, simultaneously.
Open AccessPreparation of Ultrafine Co- and Ni-Coated (Ti,W,Mo,Ta)(C,N) Powders and Their Influence on the Microstructure of Ti(C,N)-Based Cermets
The use of metal-coated ceramic powders not only effectively enhances the wettability of the metal–ceramic interface but also promotes a more uniform microstructure in Ti(C,N)-based cermets, which is advantageous for improving their mechanical properties. In this study, ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders were synthesized via the spray-drying-in-situ carbothermal reduction method. Subsequently, Ti(C,N)-based cermets were effectively fabricated using the as-prepared ultrafine Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders. The impact of reaction temperature, heating rate, and isothermal time on the phase and microstructure of prepared powders was analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Additionally, the microstructure of the as-sintered cermets was experimentally investigated. The findings reveal that the complete reduction of Co and Ni metal salts, pre-coated on the surface of (Ti,W,Mo,Ta)(C,N) particles, can be achieved through rapid heating (10 °C/min) in a specific temperature range (600–1000 °C) with an isothermal time of 3 h at a lower reduction temperature (1000 °C). The synthesized powders have only two phases: the (Ti,W,Mo,Ta)(C,N) phase and Co/Ni phase, and no other heterogeneous phases were observed with an oxygen content of 0.261 wt.%. Notably, the conventional core–rim structure was not dominant in the cermets obtained from the prepared Co- and Ni-coated (Ti,W,Mo,Ta)(C,N) powders. Moreover, the heterogeneous segregation effect of the Co/Ni coating on the ultrafine powder particles resulted in a finer microstructure than the traditional cermets with the same composition. However, the grain size is mainly in the range of 0.5–0.8 μm. The weaker residual stresses at the core and rim interfaces and the finer particle distributions could theoretically enhance the toughness of Ti(C,N)-based cermets, simultaneously.
- Open Access
- 11 January 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (4) , 2727-2735
Effect of organic solvents on calcium minodronate crystal morphology in aqueous solution: an experimental and theoretical study
A modified AE model was applied to morphology prediction of Ca(Min) 2 and relationships between morphology change and organic volumes were revealed.
- 11 January 2023
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 13 (4) , 2727-2735
Open AccessEffect of organic solvents on calcium minodronate crystal morphology in aqueous solution: an experimental and theoretical study
A modified AE model was applied to morphology prediction of Ca(Min) 2 and relationships between morphology change and organic volumes were revealed.