JLJi Li

Ji Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ji Li has a total of 60 co-authors. Here are the top co-authors by number of shared publications:

  • Xiaolei Zhang

    School of Ecology and Environment, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, PR China; Shenzhen Key Laboratory of Water Resource Utilization and Environmental Pollution Control, Shenzhen 518055, PR China

    9 shared publications
  • Xiaolei Zhang

    School of Ecology and Environment, Harbin Institute of Technology, Shenzhen 518055, China

    6 shared publications
  • Wenyi Dong

    School of Ecology and Environment, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, PR China; Shenzhen Key Laboratory of Water Resource Utilization and Environmental Pollution Control, Shenzhen 518055, PR China

    5 shared publications
  • Tao Song

    School of Civil and Environmental Engineering, Harbin Institute of Technology, Shenzhen, Shenzhen, Guangdong 518055, PR China

    4 shared publications
  • Mengen Lei

    School of Ecology and Environment, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China

    3 shared publications
  • Yong Li

    School of Ecology and Environment, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, PR China

    3 shared publications

Latest Publications

  • Open Access

    Data-Driven BOD5 Prediction in Urban Drainage Networks Using a BP Neural Network Under Limited Monitoring Conditions

    by Yongshuai Hou, Yi Zhou, Ji Li, Xiaolei Zhang

    To address the engineering challenges of long detection cycles and the inability to provide real-time early warning for the traditional measurement of 5-day biochemical oxygen demand (BOD5) in drainage networks, coupled with the limited availability of monitored indicators in practice, this study proposes a BOD5 concentration prediction method based on a BP neural network. Based on 10,511 sets of field measurements from a city’s drainage network, only three routinely measurable indicators, chemical oxygen demand (COD), ammonia nitrogen (NH4+-N), and total phosphorus (TP), were selected as input features. A COD-only baseline model was first constructed to validate the reliability of the core predictive factor (R2 = 0.9401). NH4+-N and TP were then incorporated to build a three-feature synergistic prediction model, which improved the R2 to 0.9541. By comparing three optimization algorithms (L-BFGS, Adam, and SGD) and performing hyperparameter optimization, the final test-set R2 reached 0.957 with an MAE of 8.834 mg/L (MAPE = 12.89%), representing a practical error of approximately 10.3% of the mean BOD5 concentration. The prediction accuracy was significantly superior to support vector regression (SVR, R2 = 0.930) and multiple linear regression (MLR, R2 = 0.955). Generalization ability was validated using three external independent datasets from Jinan (China), Hohhot (China), and Melbourne (Australia). The results show that the model maintains reasonable predictive capability within the same region (R2= 0.844), but accuracy declines substantially when transferring across regions (MAPE increasing from 12.89% to 35.07–58.63%) and countries. This method provides a high-accuracy, low-cost, real-time estimation scheme for early warning of water quality in drainage networks under limited monitoring conditions.

  • In situ sludge reduction assisted by alternating electrode-based electrochemical treatment

    by Xiaolei Zhang, Quanze Liu, Shaoping Luo, Yingxue Sun, Yong Li, Wenyi Dong, Patrick Drogui, Ji Li

  • Open Access

    Different Oxidation as a Pre-Treatment for Wastewater from a Coal-Fired Power Plant to Enhance the Sodium Salt Concentrate by RO

    by Guang Shi, Liu Yang, Ling Wu, Zheng Ma, Bowen Tan, Ji Li

    Carbon dioxide emissions are a major concern for coal-fired power plants. A capture and utilization method is highly demanded. The wastewater generated by a power plant contains a high concentration of Na+. Using wastewater salts to absorb carbon dioxide for sodium carbonate production is a promising strategy, as it can achieve carbon capture and utilization and wastewater resource utilization. However, the salt concentration in raw wastewater from coal-fired power plants is generally insufficient to achieve sustainable carbon capture; thus, concentrating the Na+ in the wastewater is key. In this study, desulfurization wastewater was investigated as a source of salts. The reverse osmosis (RO) process was selected for salt concentration. As wastewater is significantly complex and unsuitable for direct RO treatment, pre-treatment was conducted. For chemical oxygen demand (COD) removal, Fenton oxidation (49.7%) and electrochemical oxidation (49.3%) achieved better results than microelectrolysis (25.3%). Precipitation showed a strong ability to remove hardness. The removal efficiencies for Mg2+ and Ca2+ were 99.9% and 99.8%, respectively. It gave 8.6% COD removal as well. Additionally, 89.8% of ammonia was removed by stripping. To further decrease the pollutant concentrations, activated carbon was used for adsorption. RO then concentrated the pre-treated wastewater after nanofiltration. The final level of NaCl was 40.4 g/L after concentration. This was lower than that required to concentrate the water, which contained only NaCl. This is due to the presence of impurities left in the wastewater after pre-treatment. The study reveals that pre-treatment is essential to achieve the desired NaCl concentration in RO with the ultimate goal of CO2 capture.

  • Open Access

    From Filamentous Bulking to Utilization: Formation Mechanisms of Filamentous Biofilms and Construction of Stabilized Systems

    by Tao Song, Ji Li, Xiaolei Zhang

    Sludge bulking in wastewater treatment is often caused by massive filamentous bacteria. This study aimed to turn such bacteria into a stable system dominated by filamentous biofilms (FBs) by using a continuous flow reactor (CFR) fed with simulated domestic wastewater; to address FBs’ poor solid–liquid separation and uncontrollable sludge retention time (SRT), string carriers were added, SRT was controlled at 30 days, and parameters like mixed liquid suspended solids (MLSS) and sludge volume index (SVI) were monitored. Results showed filamentous Sphaerotilus (68–93% of FBs) self-aggregated as FBs’ reticular skeleton (loose, porous, stable, max 8 cm) with non-filamentous bacteria anchoring; FBs achieved >80% COD/NH4+-N removal despite low MLSS ( 350 mL/g. The application of carriers increased the proportion of non-filamentous microorganisms to over 80%, reduced SVI to 150–400 mL/g, and increased MLSS to over 2700 mg/L, enabling stable operation. This study challenges the traditional negative perception of filamentous bacteria and opens new prospects for wastewater treatment technology.


  • Open Access

    The Application of Sn2− in Autotrophic Denitrification Process for Advanced Nitrogen Removal in Wastewater Treatment

    by Yingxue Sun, Xiaolei Zhang, Chenli Ye, Ziying He, Hongjie Wang, Ji Li

    This study presents a cost-effective and feasible technique for the deep denitrification of wastewater, based on sulfur autotrophic denitrification mediated by polysulfides (Sn2−). Various polysulfides were used as electron donors in an aerobic/anoxic sequencing batch reactor (SBR) to simulate nitrification and denitrification processes. The performance of different polysulfide species and their respective dosages were evaluated to determine the optimal conditions for nitrogen removal. Under optimal nitrogen removal conditions with a dosing of 19.2 mg S/L from Na2S3, the system was operated continuously for 38 days, with low sludge production during the process. During stable operation, the system achieved an average removal of 7.3 mg/L of NO3−-N, corresponding to a removal efficiency of 23.1%. No significant accumulation of NO2−-N was observed in the effluent, and the average utilization efficiency of Na2S3 reached 83.7%. Continuous dosing of Na2S3 promoted the enrichment of sulfur autotrophic denitrification-related microorganisms within the system.

  • Open Access

    Low Strength Wastewater Treatment Using a Combined Biological Aerated Filter/Anammox Process

    by Wanying Xie, Ji Li, Tao Song, Yong Li, Zhenlin Wang, Xiaolei Zhang

    To achieve the in situ capacity expansion of the post-denitrification biological aerated filter (BAF-DN), the integration of BAF with the anammox process (BAF/AX) was proposed. With the objective of maximizing retaining ammonia nitrogen, the operational optimization of BAF was achieved by two distinct strategies. The treatment performance of BAF demonstrated that the removal efficiencies of chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) was 66.3~67.3% and 4~12%, respectively, under conditions of low aeration intensity (0.4 m3·m−2·h−1) or a shortened empty bed residence time (EBRT) of 30 min. Residual NH4+-N in the BAF effluent served as the ammonia substrate for the subsequent anammox process, which was successfully launched by using ceramic particles and sponges as carriers. Notably, the sponge carrier facilitated a shorter start-up period of 41 to 44 days. Furthermore, the sponge-based anammox reactor exhibited a superior NH4+-N removal capacity (≥85.7%), under operations of a shorter EBRT of 40 min, low influent NH4+-N concentrations (≤30 mg/L), and COD levels of ≤67 mg/L. In addition, a comprehensive evaluation of the BAF/AX process was conducted, which considered performance, cost-effectiveness, and engineering feasibility. The performance results illustrated that the effluent quality met the standard well (with a COD level of ≤ 50 mg/L, and a TN of ≤3.1~10.5 mg/L). Following a comparison against the low aeration intensity operation, it was recommended to operate BAF at a low EBRT within the BAF/AX process. Consequently, the treated volume was double the volume of the standalone BAF-DN, synchronously achieving low costs (0.413 yuan/m3).


  • Open Access

    Fenton Oxidation Combined with Iron–Carbon Micro-Electrolysis for Treating Leachate Generated from Thermally Treated Sludge

    by Xiaoqing Dong, Hui Liu, Ji Li, Ruiqi Gan, Quanze Liu, Xiaolei Zhang

    In this study, Iron–Carbon Micro-Electrolysis (ICME), Fenton oxidation, and their combination were investigated to treat the leachate obtained from a wastewater treatment plant located in southern China. The results show that the Fenton-ICME process was the most efficient one. After the leachate was treated with the Fenton-ICME process, the COD concentration was reduced from the initial 35,772 mg/L to 13,522 mg/L, and the removal efficiency was up to 62.2%. In addition, the biological oxygen demand (BOD) to COD ratio increased by 40% at optimal conditions. This suggests that the biodegradability of the leachate has been increased, facilitating the biodegradation of the leachate after it is mixed with the raw wastewater. By studying the characteristic variation of the leachate treated with the Fenton-ICME process, it was found that the combined process mainly removes organic compounds such as aromatic compounds, ketones, and aldehydes. The separated sludge does not have a crystalline structure, and the iron in it mainly exists in the form of trivalent iron. It reveals that the Fenton-ICME process has great potential to be used as a pretreatment of leachate.