Edward Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Edward Chen has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Massimo V. Fischetti
The University of Texas at Dallas
4 shared publications - William G. Vandenberghe
The University of Texas at Dallas
2 shared publications - Asif Islam Khan
School of Electrical and Computer Engineering Georgia Institute of Technology Atlanta GA USA
1 shared publication - Bart Sorée
IMEC
1 shared publication - Chih-Sheng Chang
Taiwan Semiconductor Manufacturing Company, Hsinchu, Taiwan
1 shared publication - Chinsung Park
School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA
1 shared publication
Latest Publications
- Open Access
- 6 November 2026
- Published by American Physical Society (APS) in APS Open Science
- Vol. 1
Static dielectric constant of thin dielectrics in extremely scaled silicon nanosheet transistors
We argue that the static dielectric constant of small (thin and/or narrow) semiconductor and insulator nanostructures depends strongly on their environment. We do so by considering the electronic response, simply reviewing, briefly but critically, the existing literature. Regarding the ionic response, in addition to reviewing the literature, we use a simple model to account for the confinement of optical phonons in thin films and show that the reduction of their density of states has a negligible effect on the dielectric constant, in contrast to some claims found in the literature. In general, we argue that in realistic structures, such as double-gated Si nanosheets, the use of the bulk dielectric constants for both the channel and the gate insulators is justified.
- 6 November 2026
- Published by American Physical Society (APS) in APS Open Science
- Vol. 1
Open AccessStatic dielectric constant of thin dielectrics in extremely scaled silicon nanosheet transistors
We argue that the static dielectric constant of small (thin and/or narrow) semiconductor and insulator nanostructures depends strongly on their environment. We do so by considering the electronic response, simply reviewing, briefly but critically, the existing literature. Regarding the ionic response, in addition to reviewing the literature, we use a simple model to account for the confinement of optical phonons in thin films and show that the reduction of their density of states has a negligible effect on the dielectric constant, in contrast to some claims found in the literature. In general, we argue that in realistic structures, such as double-gated Si nanosheets, the use of the bulk dielectric constants for both the channel and the gate insulators is justified.
- Open Access
- 19 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (24) , 245107
Dominant scattering mechanisms in the low/high electric field transport in cryogenic 2D confinement in silicon (110) with high- κ oxides
The performance of silicon nano-devices at cryogenic temperatures is critical for quantum qubit control circuits and space applications. Using multi-valley Monte Carlo simulations, we investigate electron transport in Si (110) systems. At low electric fields, phonon absorption becomes negligible, and mobility is governed by competition between remote Coulomb scattering at low inversion charge density and surface roughness scattering at high density, leading to a mobility peak. High- κ dielectrics such as HfO 2 introduce remote phonon scattering , which suppresses mobility. Under high electric fields, phonon emission dominates at 4 K, limiting velocity enhancement and resulting in limited current improvement.
- 19 June 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (24) , 245107
Open AccessDominant scattering mechanisms in the low/high electric field transport in cryogenic 2D confinement in silicon (110) with high- κ oxides
The performance of silicon nano-devices at cryogenic temperatures is critical for quantum qubit control circuits and space applications. Using multi-valley Monte Carlo simulations, we investigate electron transport in Si (110) systems. At low electric fields, phonon absorption becomes negligible, and mobility is governed by competition between remote Coulomb scattering at low inversion charge density and surface roughness scattering at high density, leading to a mobility peak. High- κ dielectrics such as HfO 2 introduce remote phonon scattering , which suppresses mobility. Under high electric fields, phonon emission dominates at 4 K, limiting velocity enhancement and resulting in limited current improvement.
- 21 April 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (4)
Comparing contact resistance of edge-, top-, and hybrid-contacted two-dimensional materials
- 21 April 2026
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 25 (4)
Comparing contact resistance of edge-, top-, and hybrid-contacted two-dimensional materials
- Open Access
- 5 October 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1526
Bilayer TMDs for Future FETs: Carrier Dynamics and Device Implications
Bilayer transition metal dichalcogenides (TMDs) are promising materials for next-generation field-effect transistors (FETs) due to their atomically thin structure and favorable transport properties. In this study, we employ density functional theory (DFT) to compute the electronic band structures and phonon dispersions of bilayer WS2, WSe2, and MoS2, and the electron-phonon scattering rates using the EPW (electron-phonon Wannier) method. Carrier transport is then investigated within a semiclassical full-band Monte Carlo framework, explicitly including intrinsic electron-phonon scattering, dielectric screening, scattering with hybrid plasmon–phonon interface excitations (IPPs), and scattering with ionized impurities. Freestanding bilayers exhibit the highest mobilities, with hole mobilities reaching 2300 cm2/V·s in WS2 and 1300 cm2/V·s in WSe2. Using hBN as the top gate dielectric preserves or slightly enhances mobility, whereas HfO2 significantly reduces transport due to stronger IPP and remote phonon scattering. Device-level simulations of double-gate FETs indicate that series resistance strongly limits performance, with optimized WSe2 pFETs achieving ON currents of 820 A/m, and a 10% enhancement when hBN replaces HfO2. These results show the direct impact of first-principles electronic structure and scattering physics on device-level transport, underscoring the importance of material properties and the dielectric environment in bilayer TMDs.
- 5 October 2025
- Published by MDPI AG in Nanomaterials
- Vol. 15 (19) , 1526
Open AccessBilayer TMDs for Future FETs: Carrier Dynamics and Device Implications
Bilayer transition metal dichalcogenides (TMDs) are promising materials for next-generation field-effect transistors (FETs) due to their atomically thin structure and favorable transport properties. In this study, we employ density functional theory (DFT) to compute the electronic band structures and phonon dispersions of bilayer WS2, WSe2, and MoS2, and the electron-phonon scattering rates using the EPW (electron-phonon Wannier) method. Carrier transport is then investigated within a semiclassical full-band Monte Carlo framework, explicitly including intrinsic electron-phonon scattering, dielectric screening, scattering with hybrid plasmon–phonon interface excitations (IPPs), and scattering with ionized impurities. Freestanding bilayers exhibit the highest mobilities, with hole mobilities reaching 2300 cm2/V·s in WS2 and 1300 cm2/V·s in WSe2. Using hBN as the top gate dielectric preserves or slightly enhances mobility, whereas HfO2 significantly reduces transport due to stronger IPP and remote phonon scattering. Device-level simulations of double-gate FETs indicate that series resistance strongly limits performance, with optimized WSe2 pFETs achieving ON currents of 820 A/m, and a 10% enhancement when hBN replaces HfO2. These results show the direct impact of first-principles electronic structure and scattering physics on device-level transport, underscoring the importance of material properties and the dielectric environment in bilayer TMDs.
- Open Access
- 10 September 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (3) , 033278
Role of electrostatic doping on the resistance of metal and two-dimensional materials edge contacts
In this theoretical study, we compare electrostatically doped metal-transition metal dichalcogenide (TMD) edge-contacts versus substitutionally doped edge-contacts in terms of their contact resistance. Our approach involves the utilization of electrostatic doping achieved by applying back-gate bias to the metal-TMD edge contacts, where carrier injection is primarily governed by the Schottky barrier at the interface. To analyze these contacts, we employ the Wentzel-Kramers-Brillouin (WKB) approximation to calculate the transmission coefficient and use density functional theory (DFT)-derived band structures. We numerically solve the Poisson equation to capture the electrostatic potential. We also account for the impact of the image force using Green's function for the Poisson equation with boundary conditions appropriate to our specific geometry. Our findings reveal that electrostatically doped TMD edge contacts exhibit higher contact resistance compared to impurity-doped edge contacts at equivalent carrier concentrations. At the same time, we find that, among the electrostatically doped edge contacts, a low- back-gate oxide in conjunction with low- top oxide is preferable in terms of improvement in contact resistance. For instance, in a metal-TMD edge contact scenario involving a monolayer as the channel, as the infinitely thick top oxide, and a back-gate oxide with an equivalent oxide thickness (EOT) of , we demonstrate that it is possible to achieve an impressively low contact resistance of when the back-gate bias exceeds or equals 2 V.- 10 September 2024
- Published by American Physical Society (APS) in Physical Review Research
- Vol. 6 (3) , 033278
Open AccessRole of electrostatic doping on the resistance of metal and two-dimensional materials edge contacts
In this theoretical study, we compare electrostatically doped metal-transition metal dichalcogenide (TMD) edge-contacts versus substitutionally doped edge-contacts in terms of their contact resistance. Our approach involves the utilization of electrostatic doping achieved by applying back-gate bias to the metal-TMD edge contacts, where carrier injection is primarily governed by the Schottky barrier at the interface. To analyze these contacts, we employ the Wentzel-Kramers-Brillouin (WKB) approximation to calculate the transmission coefficient and use density functional theory (DFT)-derived band structures. We numerically solve the Poisson equation to capture the electrostatic potential. We also account for the impact of the image force using Green's function for the Poisson equation with boundary conditions appropriate to our specific geometry. Our findings reveal that electrostatically doped TMD edge contacts exhibit higher contact resistance compared to impurity-doped edge contacts at equivalent carrier concentrations. At the same time, we find that, among the electrostatically doped edge contacts, a low- back-gate oxide in conjunction with low- top oxide is preferable in terms of improvement in contact resistance. For instance, in a metal-TMD edge contact scenario involving a monolayer as the channel, as the infinitely thick top oxide, and a back-gate oxide with an equivalent oxide thickness (EOT) of , we demonstrate that it is possible to achieve an impressively low contact resistance of when the back-gate bias exceeds or equals 2 V. - Open Access
- 1 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (13)
The origin of memory window closure with bipolar stress cycling in silicon ferroelectric field-effect-transistors
A comprehensive quantitative root cause study of defect evolution leading to memory window closure from a charge balance and charge trapping perspective throughout all phases of a Si channel Hf0.5Zr0.5O2 (HZO) ferroelectric field-effect-transistor (FEFET) is reported. Starting with the first write pulse, an excessive SiO2 interlayer field is revealed that triggers the creation of defect levels Dit in excess of 1015 cm−2 eV−1 at the HZO–SiO2 interface screening ferroelectric (FE) polarization while enabling FE switching. Under subsequent early bipolar fatigue cycling (up to 104 cycles), defect creation commences at the SiO2–Si interface due to the high injected hole fluence (0.39 C/m2) during each stress pulse causing negative bias instability (NBI), which shifts the threshold voltage of the erase state VT,ERS by −0.3 V with accrual of permanently captured charge Nit of up to +5 × 10−3 C/m2 (3 × 1012 cm−2). Subsequently, Nit NBI generation at the SiO2–Si interface accelerates reaching levels of +7 × 10−2 C/m2, locking both FEFET program and erase drain current vs gate–source-voltage (ID–VGS) characteristics in the FEFET on-state inducing memory window closure at 105 cycles while FE switching (switched polarization Psw = 0.34 C/m2) remains essentially intact. These findings guide the down-selection toward suitable semiconductor/FE systems for charge balanced, reliable, and high endurance FEFETs.
- 1 April 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 135 (13)
Open AccessThe origin of memory window closure with bipolar stress cycling in silicon ferroelectric field-effect-transistors
A comprehensive quantitative root cause study of defect evolution leading to memory window closure from a charge balance and charge trapping perspective throughout all phases of a Si channel Hf0.5Zr0.5O2 (HZO) ferroelectric field-effect-transistor (FEFET) is reported. Starting with the first write pulse, an excessive SiO2 interlayer field is revealed that triggers the creation of defect levels Dit in excess of 1015 cm−2 eV−1 at the HZO–SiO2 interface screening ferroelectric (FE) polarization while enabling FE switching. Under subsequent early bipolar fatigue cycling (up to 104 cycles), defect creation commences at the SiO2–Si interface due to the high injected hole fluence (0.39 C/m2) during each stress pulse causing negative bias instability (NBI), which shifts the threshold voltage of the erase state VT,ERS by −0.3 V with accrual of permanently captured charge Nit of up to +5 × 10−3 C/m2 (3 × 1012 cm−2). Subsequently, Nit NBI generation at the SiO2–Si interface accelerates reaching levels of +7 × 10−2 C/m2, locking both FEFET program and erase drain current vs gate–source-voltage (ID–VGS) characteristics in the FEFET on-state inducing memory window closure at 105 cycles while FE switching (switched polarization Psw = 0.34 C/m2) remains essentially intact. These findings guide the down-selection toward suitable semiconductor/FE systems for charge balanced, reliable, and high endurance FEFETs.
- Open Access
- 10 March 2023
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 7 (1) , 1-9
The importance of the image forces and dielectric environment in modeling contacts to two-dimensional materials
The performance of transistors based on two-dimensional (2D) materials is affected largely by the contact resistance due to high Schottky barriers at the metal-2D-material interface. In this work, we incorporate the effect of surrounding dielectrics and image-force barrier-lowering in calculating the resistance of Schottky edge-contacts between a metal and a transition-metal dichalcogenide (TMD) thin layer. The electrostatic potential is computed by solving the Poisson equation numerically. The transmission probability is computed using the Wentzel–Kramers–Brillouin (WKB) approximation using the full-band density of states obtained from density functional theory (DFT). The effect of the image force is obtained analytically using the Coulomb kernel of a point charge with boundary conditions appropriate to the geometry we have considered. We find that the image-force barrier-lowering (IFBL) in edge-contacts is determined mainly by the dielectric permittivity of the surrounding oxide. We find that low-κ surrounding dielectrics are crucial for obtaining low resistance monolayer-TMD edge-contacts. Our results show metal-to-n(p)-type MoS2 (WSe2) edge-contacts with SiO2 as top and bottom insulators, a doping concentration > 1 × 1013cm−2 and a metal work-function < 5.1 eV ( > 4.6 eV) result in a contact resistance as low as 50 Ω ⋅ μm.
- 10 March 2023
- Published by Springer Nature in npj 2D Materials and Applications
- Vol. 7 (1) , 1-9
Open AccessThe importance of the image forces and dielectric environment in modeling contacts to two-dimensional materials
The performance of transistors based on two-dimensional (2D) materials is affected largely by the contact resistance due to high Schottky barriers at the metal-2D-material interface. In this work, we incorporate the effect of surrounding dielectrics and image-force barrier-lowering in calculating the resistance of Schottky edge-contacts between a metal and a transition-metal dichalcogenide (TMD) thin layer. The electrostatic potential is computed by solving the Poisson equation numerically. The transmission probability is computed using the Wentzel–Kramers–Brillouin (WKB) approximation using the full-band density of states obtained from density functional theory (DFT). The effect of the image force is obtained analytically using the Coulomb kernel of a point charge with boundary conditions appropriate to the geometry we have considered. We find that the image-force barrier-lowering (IFBL) in edge-contacts is determined mainly by the dielectric permittivity of the surrounding oxide. We find that low-κ surrounding dielectrics are crucial for obtaining low resistance monolayer-TMD edge-contacts. Our results show metal-to-n(p)-type MoS2 (WSe2) edge-contacts with SiO2 as top and bottom insulators, a doping concentration > 1 × 1013cm−2 and a metal work-function < 5.1 eV ( > 4.6 eV) result in a contact resistance as low as 50 Ω ⋅ μm.