Zuhao Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zuhao Wang has a total of 136 co-authors. Here are the top co-authors by number of shared publications:
- Bin Zhang
Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, People’s Republic of China
12 shared publications - Wei Wang
Institute of Plasma Physics, Hefei institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
11 shared publications - Jinping Qian
Chinese Academy of Sciences - Hefei Institutes of Physical Sciences
7 shared publications - Tianqi Jia
Institute of Plasma Physics, Chinese Academy of Sciences
7 shared publications - Wenbin Liu
Institute of Plasma Physics, Hefei institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, China
7 shared publications - Runze Chen
Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, China
6 shared publications
Latest Publications
- Open Access
- 18 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086016
Tokamak discharge simulation for EAST by coupling METIS and free-boundary equilibrium code FBT
Fast and reliable discharge modeling is an essential tool for tokamak scenario development, as extensive simulations are required to explore the feasible operational space and translate physical targets into implementable actuator waveforms. In this work, a fast discharge simulator for EAST was developed by coupling the fast integrated tokamak modeling tool METIS with the free-boundary equilibrium code FBT from the MEQ (Matlab EQuilibrium) suite. METIS provides the evolution of the plasma profiles by self-consistently solving heat and particle transport with source profiles. The generated outputs are then used directly in FBT to computes the poloidal field coil currents needed in order to obtain a given plasma shape. The coupling strategy is based either on matching the free functions (p'(ψ) and FF'(ψ)) on the right-hand side of the Grad–Shafranov equation, or on matching global quantities such as the plasma current Ip and stored energy W_MHD. Both approaches are effective in ensuring consistency of the pressure and current-density profiles between the two codes. The last closed flux surface (LCFS) curve computed by FBT is fed back into METIS to update the LCFS, and METIS is then run again. The METIS–FBT iteration is repeated until convergence is reached. The results obtained with the equilibrium code FBT are first benchmarked against experimental data and reconstruction results available on EAST. The capability of the coupled codes is demonstrated by simulating a radio-frequency heated discharge on EAST, showing that the integrated discharge simulator enables scenario prediction that is both physically consistent and engineering-feasible. Finally, the application of this new simulation tool for tokamak scenario design is discussed.
- 18 June 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086016
Open AccessTokamak discharge simulation for EAST by coupling METIS and free-boundary equilibrium code FBT
Fast and reliable discharge modeling is an essential tool for tokamak scenario development, as extensive simulations are required to explore the feasible operational space and translate physical targets into implementable actuator waveforms. In this work, a fast discharge simulator for EAST was developed by coupling the fast integrated tokamak modeling tool METIS with the free-boundary equilibrium code FBT from the MEQ (Matlab EQuilibrium) suite. METIS provides the evolution of the plasma profiles by self-consistently solving heat and particle transport with source profiles. The generated outputs are then used directly in FBT to computes the poloidal field coil currents needed in order to obtain a given plasma shape. The coupling strategy is based either on matching the free functions (p'(ψ) and FF'(ψ)) on the right-hand side of the Grad–Shafranov equation, or on matching global quantities such as the plasma current Ip and stored energy W_MHD. Both approaches are effective in ensuring consistency of the pressure and current-density profiles between the two codes. The last closed flux surface (LCFS) curve computed by FBT is fed back into METIS to update the LCFS, and METIS is then run again. The METIS–FBT iteration is repeated until convergence is reached. The results obtained with the equilibrium code FBT are first benchmarked against experimental data and reconstruction results available on EAST. The capability of the coupled codes is demonstrated by simulating a radio-frequency heated discharge on EAST, showing that the integrated discharge simulator enables scenario prediction that is both physically consistent and engineering-feasible. Finally, the application of this new simulation tool for tokamak scenario design is discussed.
- 1 January 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (1) , 019501
Corrigendum: Gyrokinetic simulations of core turbulence and thermal transport in the high β P discharge on EAST (2023 Plasma Phys. Control. Fusion 65 055023)
- 1 January 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (1) , 019501
Corrigendum: Gyrokinetic simulations of core turbulence and thermal transport in the high β P discharge on EAST (2023 Plasma Phys. Control. Fusion 65 055023)
- Open Access
- 1 July 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (7)
Observation of turbulence suppression under low magnetic shear in EAST plasma
Dedicated transport experiments based on q-profile modulation have been performed in EAST with broadband turbulence dominated plasmas. Reduced broadband turbulence under lower internal inductance (li) is observed by a CO2 laser collective scattering system in a series of experiments across different current platforms. Experimental observations found that under higher current platforms, the internal inductance decreases with weaker magnetic shear, leading to a significant decrease in turbulence (for 1 ≤ kθρs ≤ 5) and improved confinement, which is consistent with power balance analysis. The stabilizing effect of low magnetic shear under low li on turbulence and thermal transport is also verified by using the gyrokinetic code NLT. Linear simulations show that both the growth rate and frequency of trapped electron mode under low magnetic shear are smaller than those under high magnetic shear. Nonlinear simulations are also conducted and compared to experimental results, which indicate that the reduction in electron turbulent transport with the low shear q profile may have contributed to improve Te. This work contributes to understanding the impact of magnetic configurations on turbulence transport.
- 1 July 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (7)
Open AccessObservation of turbulence suppression under low magnetic shear in EAST plasma
Dedicated transport experiments based on q-profile modulation have been performed in EAST with broadband turbulence dominated plasmas. Reduced broadband turbulence under lower internal inductance (li) is observed by a CO2 laser collective scattering system in a series of experiments across different current platforms. Experimental observations found that under higher current platforms, the internal inductance decreases with weaker magnetic shear, leading to a significant decrease in turbulence (for 1 ≤ kθρs ≤ 5) and improved confinement, which is consistent with power balance analysis. The stabilizing effect of low magnetic shear under low li on turbulence and thermal transport is also verified by using the gyrokinetic code NLT. Linear simulations show that both the growth rate and frequency of trapped electron mode under low magnetic shear are smaller than those under high magnetic shear. Nonlinear simulations are also conducted and compared to experimental results, which indicate that the reduction in electron turbulent transport with the low shear q profile may have contributed to improve Te. This work contributes to understanding the impact of magnetic configurations on turbulence transport.
- Open Access
- 27 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076043
Validation of DYON simulations and development of physical sputtering models for lithiation and boronisation in EAST
This paper validates for the first time the predictive capability of the DYON code for plasma initiation in EAST, which has metallic wall, superconducting coils and conventional tokamak shape, like ITER. The model accurately reproduced the operating spaces of loop voltage and prefill gas pressure for ohmic discharges, demonstrating its validity in predicting the required operating parameters for successful inductive plasma initiation in EAST. The role of wall conditioning on plasma initiation was investigated with the newly developed physical sputtering models of Boron and Lithium. In EAST experiments, it was observed that the discharges after boronisation of the wall are much more vulnerable to plasma burn-through failure than after lithium-coating. The simulation results revealed that despite the similar physical sputtering yield in Boron and Lithium, the radiative energy loss rates for the boron-coated wall are significantly higher than those for the lithium-coated wall, due to the much higher radiative power coefficients of Boron. Parametric scans of initial Boron content in ohmic discharge at the typical prefilled gas pressure in EAST (0.8 mPa) showed that even 1.5% of Boron content in the prefilled gas, possibly remaining after boronisation of the wall, could lead to excessive radiation energy losses and failure of plasma burn-through. For successful plasma burn-through with 1.5% initial boron content, the modelling indicates 10 kW absorption of EC power is required, and it increases with more initial boron e.g. 50 kW for 3% initial boron content.
- 27 June 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (7) , 076043
Open AccessValidation of DYON simulations and development of physical sputtering models for lithiation and boronisation in EAST
This paper validates for the first time the predictive capability of the DYON code for plasma initiation in EAST, which has metallic wall, superconducting coils and conventional tokamak shape, like ITER. The model accurately reproduced the operating spaces of loop voltage and prefill gas pressure for ohmic discharges, demonstrating its validity in predicting the required operating parameters for successful inductive plasma initiation in EAST. The role of wall conditioning on plasma initiation was investigated with the newly developed physical sputtering models of Boron and Lithium. In EAST experiments, it was observed that the discharges after boronisation of the wall are much more vulnerable to plasma burn-through failure than after lithium-coating. The simulation results revealed that despite the similar physical sputtering yield in Boron and Lithium, the radiative energy loss rates for the boron-coated wall are significantly higher than those for the lithium-coated wall, due to the much higher radiative power coefficients of Boron. Parametric scans of initial Boron content in ohmic discharge at the typical prefilled gas pressure in EAST (0.8 mPa) showed that even 1.5% of Boron content in the prefilled gas, possibly remaining after boronisation of the wall, could lead to excessive radiation energy losses and failure of plasma burn-through. For successful plasma burn-through with 1.5% initial boron content, the modelling indicates 10 kW absorption of EC power is required, and it increases with more initial boron e.g. 50 kW for 3% initial boron content.
- Open Access
- 29 May 2025
- Published by IOP Publishing in Machine Learning: Science and Technology
- Vol. 6 (2) , 025045
Thermal damage detection of EAST internal component based on machine learning
During the discharge process, thermal events are common and destructive in Tokamak experiments. High energy particles in plasma can collide with device components such as limiters and diverters, which can lead to overheating, material cracking, and even damage to the structure of the device. Therefore, we need efficient detection methods to monitor thermal events in real-time. To address the challenge of identifying thermal damage to internal components of the first wall during the Experimental Advanced Superconducting Tokamak (EAST) discharges, we introduce the YOLOv8 model for hotspot detection on EAST and present the customized EAST- You Only Look Once (YOLO) algorithm, derived from an enhanced YOLOv8 framework. YOLOv8, known for its strong performance in real-time object detection, serves as a robust base model for this task. However, its performance on small object detection, such as early-stage thermal damage, is limited. Improvements are needed for specialized tasks, particularly for early warning and precise identification of small internal component damage during the initial stages of EAST discharges. we enhance the YOLOv8 model by incorporating specialized layers for detecting small targets and integrating the CBAM attention mechanism. These adjustments result in a network model capable of sensitively detecting internal component damage in EAST. Experimental results demonstrate that EAST-YOLO surpasses several versions of traditional YOLOv8 models in model evaluation metrics, achieving a precision of 97.5%, mAP50 of 97.7%, and a Recall of 94.0%. This problem- oriented approach significantly improves the operational safety and stability of the EAST device by enabling early detection of thermal events. The AI-based detection method provides a new solution to safeguarding the fusion device, while also offering potential avenues for integrating artificial intelligence technologies into EAST feedback control and operating systems in the future.
- 29 May 2025
- Published by IOP Publishing in Machine Learning: Science and Technology
- Vol. 6 (2) , 025045
Open AccessThermal damage detection of EAST internal component based on machine learning
During the discharge process, thermal events are common and destructive in Tokamak experiments. High energy particles in plasma can collide with device components such as limiters and diverters, which can lead to overheating, material cracking, and even damage to the structure of the device. Therefore, we need efficient detection methods to monitor thermal events in real-time. To address the challenge of identifying thermal damage to internal components of the first wall during the Experimental Advanced Superconducting Tokamak (EAST) discharges, we introduce the YOLOv8 model for hotspot detection on EAST and present the customized EAST- You Only Look Once (YOLO) algorithm, derived from an enhanced YOLOv8 framework. YOLOv8, known for its strong performance in real-time object detection, serves as a robust base model for this task. However, its performance on small object detection, such as early-stage thermal damage, is limited. Improvements are needed for specialized tasks, particularly for early warning and precise identification of small internal component damage during the initial stages of EAST discharges. we enhance the YOLOv8 model by incorporating specialized layers for detecting small targets and integrating the CBAM attention mechanism. These adjustments result in a network model capable of sensitively detecting internal component damage in EAST. Experimental results demonstrate that EAST-YOLO surpasses several versions of traditional YOLOv8 models in model evaluation metrics, achieving a precision of 97.5%, mAP50 of 97.7%, and a Recall of 94.0%. This problem- oriented approach significantly improves the operational safety and stability of the EAST device by enabling early detection of thermal events. The AI-based detection method provides a new solution to safeguarding the fusion device, while also offering potential avenues for integrating artificial intelligence technologies into EAST feedback control and operating systems in the future.
- Open Access
- 1 April 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (4)
Research on confinement improvement under rational safety factor q on EAST
The q(r) profile distribution is a critical issue for the confinement and stability of the plasma. The optimized q(r) profiles can help reduce magnetic disturbances in the magnetic field, reduce the particle and energy loss of the plasma, inhibit the development of turbulence and instability, and improve the stability of the plasma. This paper mainly discusses the improved confinement due to the appearance of the q = 1 surface. The plasma internal inductance (li) of the two discharges is evolved differently after the LH power injection under the same heating power condition. Meanwhile, the different q(r) profiles (the q = 1 surface) accompanying with the appearance of the electron internal transport barrier in shot No. 106308 results in the improved confinement. The simulation results calculated by the TGLF code [Kinsey et al., Phys. Plasmas 15, 055908 (2008)] show that the growth rate of the turbulence of No. 106308 was lower than that of No. 106309 at the core region, which indicated that the turbulence was stabilized. The experimental results indicate that the rational q = 1 surface may play a dominant role in the ITB formation and confinement improvement in this paper.
- 1 April 2025
- Published by AIP Publishing in AIP Advances
- Vol. 15 (4)
Open AccessResearch on confinement improvement under rational safety factor q on EAST
The q(r) profile distribution is a critical issue for the confinement and stability of the plasma. The optimized q(r) profiles can help reduce magnetic disturbances in the magnetic field, reduce the particle and energy loss of the plasma, inhibit the development of turbulence and instability, and improve the stability of the plasma. This paper mainly discusses the improved confinement due to the appearance of the q = 1 surface. The plasma internal inductance (li) of the two discharges is evolved differently after the LH power injection under the same heating power condition. Meanwhile, the different q(r) profiles (the q = 1 surface) accompanying with the appearance of the electron internal transport barrier in shot No. 106308 results in the improved confinement. The simulation results calculated by the TGLF code [Kinsey et al., Phys. Plasmas 15, 055908 (2008)] show that the growth rate of the turbulence of No. 106308 was lower than that of No. 106309 at the core region, which indicated that the turbulence was stabilized. The experimental results indicate that the rational q = 1 surface may play a dominant role in the ITB formation and confinement improvement in this paper.
- 18 March 2025
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (4) , 045020
Research on confinement improvement under optimized injection time of electron cyclotron resonance heating power at EAST
A primary objective of the experimental advanced super-conducting tokamak (EAST) is to demonstrate steady-state long-pulse high-performance plasma operation for future large-scale devices like ITER and CFETR (Wan et al 2017 Nucl. Fusion 57 102019). The formation of internal transport barriers (ITBs) is one of the key issues to achieve high-performance plasma operation. Optimizing the current density profile is a promising way to improve plasma confinement, which is beneficial to the formation of ITBs. A lot of effort has been dedicated to optimizing the current density profile at EAST over recent years. In this paper, the authors discuss the formation of ITBs leading to a significant improvement of plasma confinement by optimizing the injection time of electron cyclotron resonance heating (ECRH) power at EAST. After ECRH delayed injection, poloidal beta and thermal energy confinement ( H 98 y 2 ) was observed to increase. The current density distribution and the power deposition distribution were changed. The analysis of the soft x-ray (Xu et al 2020 Phys. Scr. 95 055603) and electron cyclotron emission (Liu et al 2016 Plasma Sci. Technol. 18 1148–54) diagnostics data showed that the structural strength of magnetohydrodynamics was significantly decreased in the core region in this case. The turbulence growth rate calculated by the tokamak global linearized fusion code (Kinsey et al 2008 Phys. Plasmas 15 055908) also shows that trapped electron mode turbulence is stabilized.
- 18 March 2025
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 67 (4) , 045020
Research on confinement improvement under optimized injection time of electron cyclotron resonance heating power at EAST
A primary objective of the experimental advanced super-conducting tokamak (EAST) is to demonstrate steady-state long-pulse high-performance plasma operation for future large-scale devices like ITER and CFETR (Wan et al 2017 Nucl. Fusion 57 102019). The formation of internal transport barriers (ITBs) is one of the key issues to achieve high-performance plasma operation. Optimizing the current density profile is a promising way to improve plasma confinement, which is beneficial to the formation of ITBs. A lot of effort has been dedicated to optimizing the current density profile at EAST over recent years. In this paper, the authors discuss the formation of ITBs leading to a significant improvement of plasma confinement by optimizing the injection time of electron cyclotron resonance heating (ECRH) power at EAST. After ECRH delayed injection, poloidal beta and thermal energy confinement ( H 98 y 2 ) was observed to increase. The current density distribution and the power deposition distribution were changed. The analysis of the soft x-ray (Xu et al 2020 Phys. Scr. 95 055603) and electron cyclotron emission (Liu et al 2016 Plasma Sci. Technol. 18 1148–54) diagnostics data showed that the structural strength of magnetohydrodynamics was significantly decreased in the core region in this case. The turbulence growth rate calculated by the tokamak global linearized fusion code (Kinsey et al 2008 Phys. Plasmas 15 055908) also shows that trapped electron mode turbulence is stabilized.
- Open Access
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Turbulence suppression at extreme plasma densities on DIII-D and EAST
Recent high-poloidal-beta (high-βP) experiments on DIII-D and EAST have made coordinated breakthroughs for high confinement quality at high density near the Greenwald limit. Density gradient amplification of turbulence suppression at high βP can explain both of these achievements. Experiments on DIII-D have achieved Greenwald fraction (fGr = line-averaged density/Greenwald density) above 1 simultaneously with normalized energy confinement (H98y2) around 1.5, as required in fusion reactor designs but never before verified in tokamak experiments with the divertor configuration. A synergy between increased H98y2 and fGr is observed with strong gas puffing, due to the build-up of an internal transport barrier at large radius in the temperature and density channels. Transport simulations reveal that the favorable trend of reduced turbulent energy transport at higher density is only expected when increasing the density gradient at high local safety factor and high β, thus at high βP to ensure strong α-stabilization. These conditions are crucial to many conceptual designs for steady-state reactors. New experiments on EAST have nearly doubled the ion temperature at fGr ∼ 0.9, consistent with predict-first modeling results based on the same physics revealed from the DIII-D analysis. All previous EAST long-pulse H-modes have Ti ≪ Te near plasma axis. Transport modeling indicates that the profiles are limited by ion-temperature-gradient modes at mid-radius. The modeling also suggested potential solutions, including reducing magnetic shear, enhancing density gradients, and higher impurity concentration. Following this guidance, EAST experiments directly show a strong enhancement of Ti achieved with a combination of a second plasma current ramp-up, a density gradient increase, and a Zeff perturbation by a short pulse (100 ms) of impurity injection, as predicted by the earlier modeling.
- 1 February 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (2)
Open AccessTurbulence suppression at extreme plasma densities on DIII-D and EAST
Recent high-poloidal-beta (high-βP) experiments on DIII-D and EAST have made coordinated breakthroughs for high confinement quality at high density near the Greenwald limit. Density gradient amplification of turbulence suppression at high βP can explain both of these achievements. Experiments on DIII-D have achieved Greenwald fraction (fGr = line-averaged density/Greenwald density) above 1 simultaneously with normalized energy confinement (H98y2) around 1.5, as required in fusion reactor designs but never before verified in tokamak experiments with the divertor configuration. A synergy between increased H98y2 and fGr is observed with strong gas puffing, due to the build-up of an internal transport barrier at large radius in the temperature and density channels. Transport simulations reveal that the favorable trend of reduced turbulent energy transport at higher density is only expected when increasing the density gradient at high local safety factor and high β, thus at high βP to ensure strong α-stabilization. These conditions are crucial to many conceptual designs for steady-state reactors. New experiments on EAST have nearly doubled the ion temperature at fGr ∼ 0.9, consistent with predict-first modeling results based on the same physics revealed from the DIII-D analysis. All previous EAST long-pulse H-modes have Ti ≪ Te near plasma axis. Transport modeling indicates that the profiles are limited by ion-temperature-gradient modes at mid-radius. The modeling also suggested potential solutions, including reducing magnetic shear, enhancing density gradients, and higher impurity concentration. Following this guidance, EAST experiments directly show a strong enhancement of Ti achieved with a combination of a second plasma current ramp-up, a density gradient increase, and a Zeff perturbation by a short pulse (100 ms) of impurity injection, as predicted by the earlier modeling.
- Open Access
- 6 January 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (2) , 026021
Investigation of divertor heat flux characteristics under the influence of resonant magnetic perturbations on EAST
Controlling the splitting divertor heat flux caused by resonant magnetic perturbations (RMPs) is a topic of concern for fusion devices. As a fundamental prerequisite, it is necessary to understand the characteristics of the heat flux distribution under the applied RMP field, which will be studied in this paper. The nonlinear phenomenon of strike point splitting was found to be strongly dependent on the plasma response under RMP. These splitting heat flux distributions are qualitatively explained by the simulated magnetic footprints. The RMP phase scanning experiment shows that scanning in a certain range of relative phase can maintain good edge-localized mode (ELM) mitigation and simultaneously sweep the striations of heat flux on divertor target. Additionally, even in upper single null (USN) configurations, heat stripes are observed on the lower outer divertor (LO-div), attributed to RMP-induced additional magnetic connections to the LO-div, as confirmed by magnetic topology simulations. A dedicated investigation into the impact of the discrepancy between lower and upper separatrix radii mapped to the low field side mid-plane ( d R sep ) reveals its significant influence on both ELM control and heat flux distribution. Within a certain range of d R sep , the heat flux distribution is improved while ELM suppression is maintained. These findings contribute to divertor heat flux understanding under RMP conditions in tokamak operations.
- 6 January 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (2) , 026021
Open AccessInvestigation of divertor heat flux characteristics under the influence of resonant magnetic perturbations on EAST
Controlling the splitting divertor heat flux caused by resonant magnetic perturbations (RMPs) is a topic of concern for fusion devices. As a fundamental prerequisite, it is necessary to understand the characteristics of the heat flux distribution under the applied RMP field, which will be studied in this paper. The nonlinear phenomenon of strike point splitting was found to be strongly dependent on the plasma response under RMP. These splitting heat flux distributions are qualitatively explained by the simulated magnetic footprints. The RMP phase scanning experiment shows that scanning in a certain range of relative phase can maintain good edge-localized mode (ELM) mitigation and simultaneously sweep the striations of heat flux on divertor target. Additionally, even in upper single null (USN) configurations, heat stripes are observed on the lower outer divertor (LO-div), attributed to RMP-induced additional magnetic connections to the LO-div, as confirmed by magnetic topology simulations. A dedicated investigation into the impact of the discrepancy between lower and upper separatrix radii mapped to the low field side mid-plane ( d R sep ) reveals its significant influence on both ELM control and heat flux distribution. Within a certain range of d R sep , the heat flux distribution is improved while ELM suppression is maintained. These findings contribute to divertor heat flux understanding under RMP conditions in tokamak operations.
- Open Access
- 8 November 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (12) , 126072
ECW assisted plasma startup with low toroidal electric field and full metal wall in EAST superconducting tokamak
Recent experimental results from the EAST superconducting tokamak with a full metal wall (without Li-coating) provide strong support for the ITER startup scheme with electron cyclotron wave (ECW) assistance. Detailed investigations were performed on the impact of different magnetic field geometries, including quadrupolar field configuration (QFC), wide null field configuration (NFC), and trapped particle configuration (TPC). All three configurations enabled the breakdown of neutral gas with ECW pre-ionization. However, in most discharges with QFC, the absence of closed flux surfaces after the breakdown was associated with unsuccessful plasma startups. Conversely, both NFC and TPC achieved successful plasma startups under normal conditions, with TPC demonstrating higher robustness against high impurity levels compared to NFC. Experiments found that the minimum ECW power required for a successful TPC startup is approximately 0.48 MW. Plasma startup failed if the prefill gas pressure exceeded optimal levels for a given ECW power ( ⩾ 0 .48 MW), with the critical gas pressure linearly dependent on the ECW power. Additionally, higher ECW power was required with increased impurity levels. With ECW assistance, the toroidal electric field at R = 1.85 m in EAST routine operations ( < 0.15 V m − 1 ) is significantly lower than ITER’s maximum value (0.3 V m−1), suggesting the possibility of reducing flux consumption and lowering demands on coils and power supplies for ITER.
- 8 November 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (12) , 126072
Open AccessECW assisted plasma startup with low toroidal electric field and full metal wall in EAST superconducting tokamak
Recent experimental results from the EAST superconducting tokamak with a full metal wall (without Li-coating) provide strong support for the ITER startup scheme with electron cyclotron wave (ECW) assistance. Detailed investigations were performed on the impact of different magnetic field geometries, including quadrupolar field configuration (QFC), wide null field configuration (NFC), and trapped particle configuration (TPC). All three configurations enabled the breakdown of neutral gas with ECW pre-ionization. However, in most discharges with QFC, the absence of closed flux surfaces after the breakdown was associated with unsuccessful plasma startups. Conversely, both NFC and TPC achieved successful plasma startups under normal conditions, with TPC demonstrating higher robustness against high impurity levels compared to NFC. Experiments found that the minimum ECW power required for a successful TPC startup is approximately 0.48 MW. Plasma startup failed if the prefill gas pressure exceeded optimal levels for a given ECW power ( ⩾ 0 .48 MW), with the critical gas pressure linearly dependent on the ECW power. Additionally, higher ECW power was required with increased impurity levels. With ECW assistance, the toroidal electric field at R = 1.85 m in EAST routine operations ( < 0.15 V m − 1 ) is significantly lower than ITER’s maximum value (0.3 V m−1), suggesting the possibility of reducing flux consumption and lowering demands on coils and power supplies for ITER.