Muhammad Zubair Jilani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Muhammad Zubair Jilani has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Khubab Shaker
National Textile University
1 shared publication - Madeha Jabbar
School of Engineering and Technology, National Textile University Department of Textile Engineering
1 shared publication - Yasir Nawab
Department of Textile and Apparel, Technology and Management Wilson College of Textiles, NC State University Raleigh North Carolina USA
1 shared publication - Zuhaib Ahmad
National Center for Composite Materials, School of Engineering & Technology, National Textile University, Faisalabad, Pakistan
1 shared publication - Zulfiqar Ahmad Rehan
Department of Chemistry, College of Science, Sultan Qaboos University, Muscat, Oman
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Polymer Science
- Vol. 2024 (1)
Thermal and Mechanical Performance of 3‐Phase Polymer Composite Panels for Structural Applications
The objective of this study is to establish a conceptual framework for fiber‐reinforced polymer composite (FRPC) panels designed for structural purposes through the incorporation of a third phase (fillers). The present investigation was aimed to design and fabricate 3‐phase polymer composite panels that offer enhanced thermal insulation and strength while maintaining low material and labor expenses. Two types of fibrous reinforcements (jute fabric and glass fabric) of different origins were used as reinforcement; polypropylene (PP) was used as the matrix, and microcrystalline cellulose (MCC) was used as particle reinforcement material. The composite materials were fabricated with different MCC concentrations (0, 2 wt%, and 4 wt%), using a hot compression molding technique. It was found that MCC helped to enhance the mechanical performance of the composite panels, while the thermal conductivity showed a slight reduction due to lower concentrations of MCC used. For polypropylene/glass (PPG) composites, thermal conductivity was reduced from 0.214 to 0.193 W/m·K by the addition of 4% MCC fillers. Similarly, for polypropylene/jute (PPJ) composites, it was reduced from 0.14 to 0.126 W/m·K by 4% MCC fillers. The Charpy impact strength of both PPG and PPJ composites was enhanced by the addition of fillers, and the effect was more significant in the case of PPG (increased from 24.83 to 43.98 kJ/m2 for 4% fillers). Cost analysis of the composite panels was also done, showing PPJ panels to be slightly cheaper as compared to PPG. The findings indicate that the developed composite panels have the potential to serve as partitioning as well as the outer shield of the building due to their effective thermal and mechanical properties.
- 1 January 2024
- Published by Wiley in International Journal of Polymer Science
- Vol. 2024 (1)
Open AccessThermal and Mechanical Performance of 3‐Phase Polymer Composite Panels for Structural Applications
The objective of this study is to establish a conceptual framework for fiber‐reinforced polymer composite (FRPC) panels designed for structural purposes through the incorporation of a third phase (fillers). The present investigation was aimed to design and fabricate 3‐phase polymer composite panels that offer enhanced thermal insulation and strength while maintaining low material and labor expenses. Two types of fibrous reinforcements (jute fabric and glass fabric) of different origins were used as reinforcement; polypropylene (PP) was used as the matrix, and microcrystalline cellulose (MCC) was used as particle reinforcement material. The composite materials were fabricated with different MCC concentrations (0, 2 wt%, and 4 wt%), using a hot compression molding technique. It was found that MCC helped to enhance the mechanical performance of the composite panels, while the thermal conductivity showed a slight reduction due to lower concentrations of MCC used. For polypropylene/glass (PPG) composites, thermal conductivity was reduced from 0.214 to 0.193 W/m·K by the addition of 4% MCC fillers. Similarly, for polypropylene/jute (PPJ) composites, it was reduced from 0.14 to 0.126 W/m·K by 4% MCC fillers. The Charpy impact strength of both PPG and PPJ composites was enhanced by the addition of fillers, and the effect was more significant in the case of PPG (increased from 24.83 to 43.98 kJ/m2 for 4% fillers). Cost analysis of the composite panels was also done, showing PPJ panels to be slightly cheaper as compared to PPG. The findings indicate that the developed composite panels have the potential to serve as partitioning as well as the outer shield of the building due to their effective thermal and mechanical properties.