Akhila Sheshadri
Akhila Sheshadri has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Shriram Marathe
Wrocław University of Science and Technology: Politechnika Wrocławska
13 shared publications - Łukasz Sadowski
Department of Materials Engineering and Construction Processes, Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wroclaw, Poland
8 shared publications Shriram Marathe
NITTE (Deemed to be University)
2 shared publicationsAnisha P Rodrigues
Department of Computer Science and Engineering , Nitte (Deemed to be University) , NMAM Institute of Technology (NMAMIT) , Karkala Taluk , Udupi District , Karnataka , India
1 shared publicationAnisha P. Rodrigues
NITTE (Deemed to be University), NMAM Institute of Technology (NMAMIT)
1 shared publication- Anisha P. Rodrigues
Department of Computer Science and Engineering, NMAM Institute of Technology, NITTE (Deemed to be University), Nitte, India
1 shared publication
Latest Publications
- Open Access
- 13 July 2025
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 27 (2) , 431-460
Synergy of industrial wastes in eco-friendly, air-cured alkali activated pavement concrete composites: properties, embodied carbon and energy assessment and modelling
- 13 July 2025
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 27 (2) , 431-460
Open AccessSynergy of industrial wastes in eco-friendly, air-cured alkali activated pavement concrete composites: properties, embodied carbon and energy assessment and modelling
- 11 July 2025
- Published by Springer Nature
- p. 141-150
Incorporation of Agro Industrial Wastes in Sustainable Slag-Based Alkali-Activated Pavement Concretes
- 11 July 2025
- Published by Springer Nature
- p. 141-150
Incorporation of Agro Industrial Wastes in Sustainable Slag-Based Alkali-Activated Pavement Concretes
- Open Access
- 5 July 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (6) , 2779-2804
Machine-Learning-Based Prediction of California Bearing Ratio (CBR) for Lateritic–Lithomargic Pavement Subgrades through the Major Index Properties
- 5 July 2025
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (6) , 2779-2804
Open AccessMachine-Learning-Based Prediction of California Bearing Ratio (CBR) for Lateritic–Lithomargic Pavement Subgrades through the Major Index Properties
- Open Access
- 1 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Life cycle assessment of sustainable air-cured alkali-activated concrete for permeable pavements using agro-industrial wastes
This study evaluates the environmental performance of air-cured alkali-activated permeable concrete (PAC) developed using agro-industrial by-products, including sugarcane bagasse ash (SBA), recycled concrete aggregates (RCA), waste foundry waste sand (WFS), and ground granulated blast furnace slag (GGBS). A cradle-to-gate life cycle assessment (LCA) was conducted to quantify reductions in equivalent carbon dioxide emissions (ECO2e) and embodied energy (EE) relative to conventional OPC-based permeable concretes (OPCC). The results reveal that optimized PAC mixes achieve up to 57% lower EE and 77% lower ECO2e, confirming their environmental superiority. These improvements are attributed to the complete substitution of OPC with low-impact binders and the replacement of virgin aggregates with recycled counterparts. In addition to its environmental advantages, PAC demonstrated notable cost reductions of up to 60%, enhancing its viability for real-world infrastructure applications. The study further highlights the functional advantages of PAC including enhanced permeability, structural resilience, and suitability for stormwater management which make it an effective solution for sustainable pavement infrastructure. By integrating agro-industrial waste streams into concrete-composite production, the research advances the principles of resource-efficient engineering and circular economy. The findings establish a strong foundation for future studies on life cycle cost analysis, activator optimization, and implementation strategies, thereby promoting the adoption of PAC as a low-carbon alternative in urban infrastructural practices.
- 1 July 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-12
Open AccessLife cycle assessment of sustainable air-cured alkali-activated concrete for permeable pavements using agro-industrial wastes
This study evaluates the environmental performance of air-cured alkali-activated permeable concrete (PAC) developed using agro-industrial by-products, including sugarcane bagasse ash (SBA), recycled concrete aggregates (RCA), waste foundry waste sand (WFS), and ground granulated blast furnace slag (GGBS). A cradle-to-gate life cycle assessment (LCA) was conducted to quantify reductions in equivalent carbon dioxide emissions (ECO2e) and embodied energy (EE) relative to conventional OPC-based permeable concretes (OPCC). The results reveal that optimized PAC mixes achieve up to 57% lower EE and 77% lower ECO2e, confirming their environmental superiority. These improvements are attributed to the complete substitution of OPC with low-impact binders and the replacement of virgin aggregates with recycled counterparts. In addition to its environmental advantages, PAC demonstrated notable cost reductions of up to 60%, enhancing its viability for real-world infrastructure applications. The study further highlights the functional advantages of PAC including enhanced permeability, structural resilience, and suitability for stormwater management which make it an effective solution for sustainable pavement infrastructure. By integrating agro-industrial waste streams into concrete-composite production, the research advances the principles of resource-efficient engineering and circular economy. The findings establish a strong foundation for future studies on life cycle cost analysis, activator optimization, and implementation strategies, thereby promoting the adoption of PAC as a low-carbon alternative in urban infrastructural practices.
- Open Access
- 27 February 2025
- Published by MathDoc/Centre Mersenne in Comptes Rendus. Chimie
- Vol. 28 (G1) , 185-198
Production of eco-friendly alkali-activated concrete for sustainable highway infrastructure by effective utilization of recycled construction and foundry wastes
A sustainable substitute for conventional pavement concrete composite is provided by alkali-activated concrete (AAC), which is made from industrial byproducts and which has less of an impact on the environment than conventional cement-based materials. The purpose of this research is to combine waste foundry sand (WFS) with recycled concrete aggregates (RCAs) to manufacture alkali-activated slag concrete (AASC) and to create a circular economy model that maximizes the use of recovered materials, minimizes waste disposal issues, and uses less energy during the extraction and manufacturing of raw resources. The desirable grade of the AASC mix was carefully formulated to comply with Indian Standards for high-quality pavement applications. The optimal mix proportions were determined through a series of experiments based on the hardened and fresh properties of concrete. The resulting AASC composite consisted of 20% WFS and 50% RCA based on volume. The ideal compressive strength of the mix of 64 MPa was attained after 28 days, which exceeded the required strength for the desired paving concrete. The combination that was used showed a rise of 9.67% in split tensile strength and an increase of 20.3% in flexural strength between the period of 7 and 28 days. Models of simple linear regression (SLR) and multiple linear regression (MLR) were used to predict compressive strength. SLR analysis revealed that RCA and WFS had considerable negative impacts on compressive strength, with coefficients of -0.026315 and -0.13476, respectively. With an R-squared value of 0.8044, the MLR model demonstrated strong predictive ability. The study focuses on how AASC supports resource efficiency, promotes sustainable building practices, and reduces reliance on natural aggregates. The findings contribute significantly to our understanding of how AAC might be widely applied in the building industry to promote a circular economy and to enhance environmental sustainability.
- 27 February 2025
- Published by MathDoc/Centre Mersenne in Comptes Rendus. Chimie
- Vol. 28 (G1) , 185-198
Open AccessProduction of eco-friendly alkali-activated concrete for sustainable highway infrastructure by effective utilization of recycled construction and foundry wastes
A sustainable substitute for conventional pavement concrete composite is provided by alkali-activated concrete (AAC), which is made from industrial byproducts and which has less of an impact on the environment than conventional cement-based materials. The purpose of this research is to combine waste foundry sand (WFS) with recycled concrete aggregates (RCAs) to manufacture alkali-activated slag concrete (AASC) and to create a circular economy model that maximizes the use of recovered materials, minimizes waste disposal issues, and uses less energy during the extraction and manufacturing of raw resources. The desirable grade of the AASC mix was carefully formulated to comply with Indian Standards for high-quality pavement applications. The optimal mix proportions were determined through a series of experiments based on the hardened and fresh properties of concrete. The resulting AASC composite consisted of 20% WFS and 50% RCA based on volume. The ideal compressive strength of the mix of 64 MPa was attained after 28 days, which exceeded the required strength for the desired paving concrete. The combination that was used showed a rise of 9.67% in split tensile strength and an increase of 20.3% in flexural strength between the period of 7 and 28 days. Models of simple linear regression (SLR) and multiple linear regression (MLR) were used to predict compressive strength. SLR analysis revealed that RCA and WFS had considerable negative impacts on compressive strength, with coefficients of -0.026315 and -0.13476, respectively. With an R-squared value of 0.8044, the MLR model demonstrated strong predictive ability. The study focuses on how AASC supports resource efficiency, promotes sustainable building practices, and reduces reliance on natural aggregates. The findings contribute significantly to our understanding of how AAC might be widely applied in the building industry to promote a circular economy and to enhance environmental sustainability.
- Open Access
- 22 December 2024
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 26 (9) , 2237-2261
Effect of bio-admixture on the properties of cement-slag based sustainable pervious concrete mixes for road infrastructure
- 22 December 2024
- Published by Taylor & Francis in Road Materials and Pavement Design
- Vol. 26 (9) , 2237-2261
Open AccessEffect of bio-admixture on the properties of cement-slag based sustainable pervious concrete mixes for road infrastructure
- Open Access
- 1 December 2024
- Published by Walter de Gruyter GmbH in Studia Geotechnica et Mechanica
- Vol. 46 (s1) , 389-416
Predictive Modelling of Pavement Quality Fibre-Reinforced Alkali-Activated Nano-Concrete Mixes through Artificial Intelligence
Alkali-activated concrete (AAC) has emerged as a viable sustainable alternative for the building of roads and rigid pavements, particularly in India, where infrastructure development is a major priority. With the exponential growth of highway networks, there is a noteworthy emphasis on enhancing mechanical performance of concrete pavements to overcome their inherent brittleness and limited load-carrying capacity. This research examines the incorporation of nano-silica (NS) and nano-alumina (NA) to improve the mechanical properties of pavement quality alkali-activated concrete (PQAC). Additionally, polyvinyl alcohol fibres (PVAF) and Polypropylene Fibre (PPF) were integrated into the concrete mix to address the brittle nature of PQAC and improve the tensile strength of concrete. Given the challenges associated with optimising these material combinations, this research also leverages advanced machine learning models, including Multilinear Regression (MLR), Decision Tree (DT), Random Forest (RF), AdaBoost, Support Vector Regression (SVR), Gradient Boosting (GB), to predict the split tensile strength (STS) of PQAC. A thorough analysis of predicted performance was carried out utilising assessment measures. The findings demonstrate that the AdaBoost model outperforms other models in terms of test performance, achieving an R 2 value of 0.79. This surpasses the R 2 values of MLR (0.61), SVR (0.6), DT (0.79), GB (0.791) and RF (0.796). The remaining four error measures have the lowest values among all models, with MSE = 0.202, RMSE = 0.45, CV=0.714 and MAE = 0.38. The study highlights the superior performance of ensemble models in accurately predicting STS, underscoring their potential as reliable tools for optimising material compositions in pavement applications and thereby supporting or partly replacing laboratory split tension tests, thereby saving time and cost. This research contributes to the broader goal of developing more durable and sustainable concrete mixes for construction projects.
- 1 December 2024
- Published by Walter de Gruyter GmbH in Studia Geotechnica et Mechanica
- Vol. 46 (s1) , 389-416
Open AccessPredictive Modelling of Pavement Quality Fibre-Reinforced Alkali-Activated Nano-Concrete Mixes through Artificial Intelligence
Alkali-activated concrete (AAC) has emerged as a viable sustainable alternative for the building of roads and rigid pavements, particularly in India, where infrastructure development is a major priority. With the exponential growth of highway networks, there is a noteworthy emphasis on enhancing mechanical performance of concrete pavements to overcome their inherent brittleness and limited load-carrying capacity. This research examines the incorporation of nano-silica (NS) and nano-alumina (NA) to improve the mechanical properties of pavement quality alkali-activated concrete (PQAC). Additionally, polyvinyl alcohol fibres (PVAF) and Polypropylene Fibre (PPF) were integrated into the concrete mix to address the brittle nature of PQAC and improve the tensile strength of concrete. Given the challenges associated with optimising these material combinations, this research also leverages advanced machine learning models, including Multilinear Regression (MLR), Decision Tree (DT), Random Forest (RF), AdaBoost, Support Vector Regression (SVR), Gradient Boosting (GB), to predict the split tensile strength (STS) of PQAC. A thorough analysis of predicted performance was carried out utilising assessment measures. The findings demonstrate that the AdaBoost model outperforms other models in terms of test performance, achieving an R 2 value of 0.79. This surpasses the R 2 values of MLR (0.61), SVR (0.6), DT (0.79), GB (0.791) and RF (0.796). The remaining four error measures have the lowest values among all models, with MSE = 0.202, RMSE = 0.45, CV=0.714 and MAE = 0.38. The study highlights the superior performance of ensemble models in accurately predicting STS, underscoring their potential as reliable tools for optimising material compositions in pavement applications and thereby supporting or partly replacing laboratory split tension tests, thereby saving time and cost. This research contributes to the broader goal of developing more durable and sustainable concrete mixes for construction projects.
- Open Access
- 30 November 2024
- Published by Elsevier in Cleaner Materials
- Vol. 14
Agro-industrial waste utilization in air-cured alkali-activated pavement composites: Properties, micro-structural insights and life cycle impacts
- 30 November 2024
- Published by Elsevier in Cleaner Materials
- Vol. 14
Open AccessAgro-industrial waste utilization in air-cured alkali-activated pavement composites: Properties, micro-structural insights and life cycle impacts