Marcella Matos Cordeiro Borges
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marcella Matos Cordeiro Borges has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Keyller Bastos Borges
Departamento de Ciências Naturais, Universidade Federal de São João del-Rei (UFSJ), Campus Dom Bosco, Praça Dom Helvécio 74, Fábricas, 36301-160, São João del-Rei, Minas Gerais, Brazil
8 shared publications - Bruna Carneiro Pires
Departamento de Ciências Naturais, Universidade Federal de São João del-Rei, Campus Dom Bosco, Praça Dom Helvécio 74, Fábricas, 36301-160 São João del-Rei, Minas Gerais, Brazil
3 shared publications - Arnaldo César Pereira
Universidade Federal de São João del-Rei
2 shared publications - Flávia Viana Avelar Dutra
Departamento de Ciências Naturais, Universidade Federal de São João del-Rei, Campus Dom Bosco, Praça Dom Helvécio 74, Fábricas, 36301-160 São João del-Rei, Minas Gerais, Brazil
2 shared publications Hanna Leijoto de Oliveira
Departamento de Ciências Naturais, Universidade Federal de São João Del-Rei (UFSJ), Campus Dom Bosco, 36301-160 São João del-Rei, Minas Gerais, Brasil
2 shared publications- Luiz Gustavo de Lima Guimarães
Departamento de Ciências Naturais, Universidade Federal de São João del-Rei, Campus Dom Bosco, Praça Dom Helvécio 74, Fábricas, 36301-160 São João del-Rei, Minas Gerais, Brazil
2 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (14) , 11802-11818
Organic versus Hybrid Molecularly Imprinted Polymer Adsorbents: Structure–Selectivity Trade-Offs in Progesterone Removal from Water
- 2 July 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (14) , 11802-11818
Open AccessOrganic versus Hybrid Molecularly Imprinted Polymer Adsorbents: Structure–Selectivity Trade-Offs in Progesterone Removal from Water
- Open Access
- 10 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49207-49215
Printable Carbon Black/Graphite Conductive Ink toward Electrochemical Determination of Norfloxacin in Environmental Samples
Norfloxacin (NOR), a fluoroquinolone antibiotic widely used to treat urinary tract infections and gastrointestinal disorders caused by bacteria, poses a significant environmental concern. The widespread use of NOR can lead to the development of antibiotic resistance in human populations and, upon release into the environment, can contaminate aquatic and terrestrial ecosystems, potentially impacting human and environmental health. This work aimed to develop an electrochemical sensor printed with a conductive ink composed of graphite (Gr), carbon black (CB), and stained-glass varnish (SGV) for the detection of NOR in environmental samples. The optimal ink composition demonstrated 33% Gr, 22% CB, and 45% SGV. The morphology of the proposed sensor was designed by scanning electron microscopy and Fourier transform infrared spectroscopy, and electrochemical characterization was performed by cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry was employed for NOR determination using 0.05 mol L-1 Britton-Robinson buffer as the electrolyte. Optimal current responses were obtained at pH 5.0. The developed sensor presented a detection limit of 0.227 μmol L-1 and a quantification limit of 0.756 μmol L-1 for NOR, demonstrating high sensitivity, precision, and accuracy. Furthermore, its application in real river water samples provided recovery values between 83.9 and 103.3%. The sensor proved suitable and stable for NOR determination in environmental samples.
- 10 October 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (41) , 49207-49215
Open AccessPrintable Carbon Black/Graphite Conductive Ink toward Electrochemical Determination of Norfloxacin in Environmental Samples
Norfloxacin (NOR), a fluoroquinolone antibiotic widely used to treat urinary tract infections and gastrointestinal disorders caused by bacteria, poses a significant environmental concern. The widespread use of NOR can lead to the development of antibiotic resistance in human populations and, upon release into the environment, can contaminate aquatic and terrestrial ecosystems, potentially impacting human and environmental health. This work aimed to develop an electrochemical sensor printed with a conductive ink composed of graphite (Gr), carbon black (CB), and stained-glass varnish (SGV) for the detection of NOR in environmental samples. The optimal ink composition demonstrated 33% Gr, 22% CB, and 45% SGV. The morphology of the proposed sensor was designed by scanning electron microscopy and Fourier transform infrared spectroscopy, and electrochemical characterization was performed by cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry was employed for NOR determination using 0.05 mol L-1 Britton-Robinson buffer as the electrolyte. Optimal current responses were obtained at pH 5.0. The developed sensor presented a detection limit of 0.227 μmol L-1 and a quantification limit of 0.756 μmol L-1 for NOR, demonstrating high sensitivity, precision, and accuracy. Furthermore, its application in real river water samples provided recovery values between 83.9 and 103.3%. The sensor proved suitable and stable for NOR determination in environmental samples.
- Open Access
- 25 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (26) , 28466-28477
Controlled Release of Perillyl Alcohol via pH-Responsive Chitosan-Polypyrrole Nanocarriers
This work focused on developing CS/PPy, a pH-responsive controlled-release nanocarrier composed of natural polymer, the chitosan (CS), and synthetic polymer, the polypyrrole (PPy). The goal was to evaluate its potential application in controlled release studies of perillyl alcohol (POH). To enhance its properties, CS/PPy was cross-linked with glutaraldehyde, resulting in a new material, CS/PPy/GA. CS/PPy and CS/PPy/GA demonstrated high encapsulation efficiency for POH. The release of POH was investigated at pH 4.5, 6.0, and 7.4. The POH release rate exhibited pH-dependent behavior, with a significantly higher release observed in acidic media (pH 4.5) compared to neutral/basic media (pH 7.4). This suggests the potential for controlled release of POH in response to specific physiological environments. The Korsmeyer-Peppas model was followed for the release of POH from CS/PPy at all pH values that were studied. The release behavior of POH from CS/PPy/GA exhibited a pH-dependent mechanism. The Korsmeyer-Peppas model best described release at pH 4.5 and 6.0, while the Higuchi model provided a better fit at pH 7.4. The results suggested that the synthesized materials exhibited high affinity for POH, and the release behavior is pH-dependent.
- 25 June 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (26) , 28466-28477
Open AccessControlled Release of Perillyl Alcohol via pH-Responsive Chitosan-Polypyrrole Nanocarriers
This work focused on developing CS/PPy, a pH-responsive controlled-release nanocarrier composed of natural polymer, the chitosan (CS), and synthetic polymer, the polypyrrole (PPy). The goal was to evaluate its potential application in controlled release studies of perillyl alcohol (POH). To enhance its properties, CS/PPy was cross-linked with glutaraldehyde, resulting in a new material, CS/PPy/GA. CS/PPy and CS/PPy/GA demonstrated high encapsulation efficiency for POH. The release of POH was investigated at pH 4.5, 6.0, and 7.4. The POH release rate exhibited pH-dependent behavior, with a significantly higher release observed in acidic media (pH 4.5) compared to neutral/basic media (pH 7.4). This suggests the potential for controlled release of POH in response to specific physiological environments. The Korsmeyer-Peppas model was followed for the release of POH from CS/PPy at all pH values that were studied. The release behavior of POH from CS/PPy/GA exhibited a pH-dependent mechanism. The Korsmeyer-Peppas model best described release at pH 4.5 and 6.0, while the Higuchi model provided a better fit at pH 7.4. The results suggested that the synthesized materials exhibited high affinity for POH, and the release behavior is pH-dependent.
- Open Access
- 14 November 2024
- Published by American Chemical Society (ACS) in ACS Measurement Science Au
- Vol. 5 (1) , 19-30
Sample Preparation Approaches for Determination of Quinolones in Aqueous Matrixes: Systematic Review
Quinolones and fluoroquinolones are among the most used antibiotics worldwide. Antibiotic resistance genes can be acquired by human pathogens from ambient microorganisms, which can lead to a treatment failure for bacterial infections. Furthermore, determining the levels of quinolones and fluoroquinolones in aqueous matrixes is crucial for safeguarding both human health and the environment. Using sample preparation techniques is essential since these compounds are commonly present in aqueous matrixes at trace levels. Therefore, we aimed to investigate the main analytical methods for the determination of quinolones in aqueous samples based on a systematic literature review. We only considered studies that presented more robust analytical techniques that allowed for more accurate and precise measurement of quinolones/fluoroquinolones in aqueous matrixes. In total, 18 articles met the inclusion criteria and were used in our analysis. A total of 21 quinolone antibacterial agents were investigated in water samples from 13 countries, showing a potential risk around the world. Ciprofloxacin (72.2%), enrofloxacin (61.1%), norfloxacin (50%), marbofloxacin, and levofloxacin (33.3%) were the most frequently evaluated compounds. High-Performance Liquid Chromatography stands out as the predominant instrumental technique for the separation and identification of these compounds. Additionally, among the selected studies in this review, 44% employed liquid-liquid extraction techniques and its miniaturized versions, while 56% opted for solid-phase extraction and its miniaturized variations. Finally, it is important to note that the final method efficiency relies on the entire process, from selecting the instrumental technique with appropriate detection limits, going through the entire sample preparation, to achieving a good recovery through adjustments in the extraction parameters to archive the determination of trace levels.
- 14 November 2024
- Published by American Chemical Society (ACS) in ACS Measurement Science Au
- Vol. 5 (1) , 19-30
Open AccessSample Preparation Approaches for Determination of Quinolones in Aqueous Matrixes: Systematic Review
Quinolones and fluoroquinolones are among the most used antibiotics worldwide. Antibiotic resistance genes can be acquired by human pathogens from ambient microorganisms, which can lead to a treatment failure for bacterial infections. Furthermore, determining the levels of quinolones and fluoroquinolones in aqueous matrixes is crucial for safeguarding both human health and the environment. Using sample preparation techniques is essential since these compounds are commonly present in aqueous matrixes at trace levels. Therefore, we aimed to investigate the main analytical methods for the determination of quinolones in aqueous samples based on a systematic literature review. We only considered studies that presented more robust analytical techniques that allowed for more accurate and precise measurement of quinolones/fluoroquinolones in aqueous matrixes. In total, 18 articles met the inclusion criteria and were used in our analysis. A total of 21 quinolone antibacterial agents were investigated in water samples from 13 countries, showing a potential risk around the world. Ciprofloxacin (72.2%), enrofloxacin (61.1%), norfloxacin (50%), marbofloxacin, and levofloxacin (33.3%) were the most frequently evaluated compounds. High-Performance Liquid Chromatography stands out as the predominant instrumental technique for the separation and identification of these compounds. Additionally, among the selected studies in this review, 44% employed liquid-liquid extraction techniques and its miniaturized versions, while 56% opted for solid-phase extraction and its miniaturized variations. Finally, it is important to note that the final method efficiency relies on the entire process, from selecting the instrumental technique with appropriate detection limits, going through the entire sample preparation, to achieving a good recovery through adjustments in the extraction parameters to archive the determination of trace levels.
- Open Access
- 7 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 30900-30914
Coumarin/β-Cyclodextrin Inclusion Complexes Promote Acceleration and Improvement of Wound Healing
Coumarins have great pharmacotherapeutic potential, presenting several biological and pharmaceutical applications, like antibiotic, fungicidal, anti-inflammatory, anticancer, anti-HIV, and healing activities, among others. These molecules are practically insoluble in water, and for biological applications, it became necessary to complex them with cyclodextrins (CDs), which influence their bioavailability in the target organism. In this work, we studied two coumarins, and it was possible to conclude that there were structural differences between 4,7-dimethyl-2H-chromen-2-one (DMC) and 7-methoxy-4-methyl-2H-chromen-2-one (MMC)/β-CD that were solubilized in ethanol, frozen, and lyophilized (FL) and the mechanical mixtures (MM). In addition, the inclusion complex formation improved the solubility of DMC and MMC in an aqueous medium. According to the data, the inclusion complexes were formed and are more stable at a molar ratio of 2:1 coumarin/β-CD, and hydrogen bonds along with π-π stacking interactions are responsible for the better stability, especially for (MMC)2@β-CD. In vivo wound healing studies in mice showed faster re-epithelialization and the best deposition of collagen with the (DMC)2@β-CD (FL) and (MMC)2@β-CD (FL) inclusion complexes, demonstrating clearly that they have potential in wound repair. Therefore, (DMC)2@β-CD (FL) deserves great attention because it presented excellent results, reducing the granulation tissue and mast cell density and improving collagen remodeling. Finally, the protein binding studies suggested that the anti-inflammatory activities might exert their biological function through the inhibition of MEK, providing the possibility of development of new MEK inhibitors.
- 7 June 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (24) , 30900-30914
Open AccessCoumarin/β-Cyclodextrin Inclusion Complexes Promote Acceleration and Improvement of Wound Healing
Coumarins have great pharmacotherapeutic potential, presenting several biological and pharmaceutical applications, like antibiotic, fungicidal, anti-inflammatory, anticancer, anti-HIV, and healing activities, among others. These molecules are practically insoluble in water, and for biological applications, it became necessary to complex them with cyclodextrins (CDs), which influence their bioavailability in the target organism. In this work, we studied two coumarins, and it was possible to conclude that there were structural differences between 4,7-dimethyl-2H-chromen-2-one (DMC) and 7-methoxy-4-methyl-2H-chromen-2-one (MMC)/β-CD that were solubilized in ethanol, frozen, and lyophilized (FL) and the mechanical mixtures (MM). In addition, the inclusion complex formation improved the solubility of DMC and MMC in an aqueous medium. According to the data, the inclusion complexes were formed and are more stable at a molar ratio of 2:1 coumarin/β-CD, and hydrogen bonds along with π-π stacking interactions are responsible for the better stability, especially for (MMC)2@β-CD. In vivo wound healing studies in mice showed faster re-epithelialization and the best deposition of collagen with the (DMC)2@β-CD (FL) and (MMC)2@β-CD (FL) inclusion complexes, demonstrating clearly that they have potential in wound repair. Therefore, (DMC)2@β-CD (FL) deserves great attention because it presented excellent results, reducing the granulation tissue and mast cell density and improving collagen remodeling. Finally, the protein binding studies suggested that the anti-inflammatory activities might exert their biological function through the inhibition of MEK, providing the possibility of development of new MEK inhibitors.
- 24 May 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (20)
Poly(aniline‐ co ‐pyrrole) as Adsorbent for Removal of Pharmaceuticals: Preparation, Characterization, Kinetics, Isotherms and Application on Sample Preparation
Herein, poly(aniline‐ co ‐pyrrole) has been synthetized and investigated to adsorb phenylbutazone (PBZ), ceftiofur (CEF) and prednisolone (PRD) in aqueous medium as proof of concept. After proper adsorbent characterization, some studies were carried out in batch process, i. e., contact time, pH, and concentration. The adsorption mechanism has been conducted using kinetic and isothermal models. It was found that the reaction equilibrium was reached in 20 min for all analytes. The best fit for the experimental data were obtained employing the models of dual‐site Langmuir–Freundlich, Fritz–Schlunder and Langmuir, with R 2 =0.999, 0.952 and 0.974, for PBZ, CEF and PRD, respectively. For PBZ, CEF and PRD, poly(aniline‐ co ‐pyrrole) provided a Q max =238.8 mg g −1 and K max =0.086 L g −1 , Q =0.028 mg g −1 and K max =3.258 L g −1 , Q =13.66 mg g −1 and K L =0.005 L g −1 , respectively. Finally, the copolymer was evaluated in solid phase extraction, which showed recovery around 70 % for PBZ, offering also exciting opportunities for further application in the separation process.
- 24 May 2024
- Published by Wiley in ChemistrySelect
- Vol. 9 (20)
Poly(aniline‐ co ‐pyrrole) as Adsorbent for Removal of Pharmaceuticals: Preparation, Characterization, Kinetics, Isotherms and Application on Sample Preparation
Herein, poly(aniline‐ co ‐pyrrole) has been synthetized and investigated to adsorb phenylbutazone (PBZ), ceftiofur (CEF) and prednisolone (PRD) in aqueous medium as proof of concept. After proper adsorbent characterization, some studies were carried out in batch process, i. e., contact time, pH, and concentration. The adsorption mechanism has been conducted using kinetic and isothermal models. It was found that the reaction equilibrium was reached in 20 min for all analytes. The best fit for the experimental data were obtained employing the models of dual‐site Langmuir–Freundlich, Fritz–Schlunder and Langmuir, with R 2 =0.999, 0.952 and 0.974, for PBZ, CEF and PRD, respectively. For PBZ, CEF and PRD, poly(aniline‐ co ‐pyrrole) provided a Q max =238.8 mg g −1 and K max =0.086 L g −1 , Q =0.028 mg g −1 and K max =3.258 L g −1 , Q =13.66 mg g −1 and K L =0.005 L g −1 , respectively. Finally, the copolymer was evaluated in solid phase extraction, which showed recovery around 70 % for PBZ, offering also exciting opportunities for further application in the separation process.
- 1 November 2021
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 168, 105050
Magnetic and pH responsive composite hydrogel-based on poly(2-(diethylamino)ethyl methacrylate)/chitosan for fipronil removal from aqueous medium
- 1 November 2021
- Published by Elsevier in Reactive and Functional Polymers
- Vol. 168, 105050
Magnetic and pH responsive composite hydrogel-based on poly(2-(diethylamino)ethyl methacrylate)/chitosan for fipronil removal from aqueous medium
- Open Access
- 20 April 2019
- Published by Oxford University Press (OUP) in Journal of Chromatographic Science
- Vol. 57 (7) , 671-678
Assessment of the Performance of Solid Phase Extraction Based on Pipette Tip Employing a Hybrid Molecularly Imprinted Polymer as an Adsorbent for Enantioselective Determination of Albendazole Sulfoxide
Herein, an organic–inorganic hybrid molecularly imprinted polymer (MIP) was successfully synthesized with albendazole sulfoxide (ABZSO) as a template and 3-(trimethoxysilyl)propyl methacrylate, a bifunctional group compound, as a single cross-linking agent. In this study, a simple method using HPLC–DAD was developed for the determination of ABZSO enantiomers in human urine using pipette tip-based molecularly imprinted polymer solid phase extraction (PT–MIP–SPE). Enantioseparation with satisfactory retention times (5.17 and 7.09 min), acceptable theoretical plates (N = 4,535 and 5,091) and strong resolution (Rs = 5.45) was performed with an Agilent® Eclipse Plus C18 (100 mm × 4.6 mm, 3.5 μm) coupled with a Chiralpak® IA column (100 mm × 4.6 mm, 3 μm), a mixture with ethanol:water (50:50, v/v) as the mobile phase, temperature at 40°C, flow rate at 0.9 mL min−1 and λ = 230 nm. Thereafter, certain parameters affecting the PT–MIP–SPE were investigated in detail and the better conditions were: 300 μL of water as washing solvent, 500 μL of ethanol:acetic acid (9:1, v/v) as eluting solvent, 20 mg of MIP, 500 μL of human urine at pH 9 and no addition of NaCl. Recoveries/relative standard deviation (RSD%) for (R)-(+)-ABZSO and (S)-(−)-ABZSO were 78.2 ± 0.2% and 69.7 ± 1.7%, respectively.
- 20 April 2019
- Published by Oxford University Press (OUP) in Journal of Chromatographic Science
- Vol. 57 (7) , 671-678
Open AccessAssessment of the Performance of Solid Phase Extraction Based on Pipette Tip Employing a Hybrid Molecularly Imprinted Polymer as an Adsorbent for Enantioselective Determination of Albendazole Sulfoxide
Herein, an organic–inorganic hybrid molecularly imprinted polymer (MIP) was successfully synthesized with albendazole sulfoxide (ABZSO) as a template and 3-(trimethoxysilyl)propyl methacrylate, a bifunctional group compound, as a single cross-linking agent. In this study, a simple method using HPLC–DAD was developed for the determination of ABZSO enantiomers in human urine using pipette tip-based molecularly imprinted polymer solid phase extraction (PT–MIP–SPE). Enantioseparation with satisfactory retention times (5.17 and 7.09 min), acceptable theoretical plates (N = 4,535 and 5,091) and strong resolution (Rs = 5.45) was performed with an Agilent® Eclipse Plus C18 (100 mm × 4.6 mm, 3.5 μm) coupled with a Chiralpak® IA column (100 mm × 4.6 mm, 3 μm), a mixture with ethanol:water (50:50, v/v) as the mobile phase, temperature at 40°C, flow rate at 0.9 mL min−1 and λ = 230 nm. Thereafter, certain parameters affecting the PT–MIP–SPE were investigated in detail and the better conditions were: 300 μL of water as washing solvent, 500 μL of ethanol:acetic acid (9:1, v/v) as eluting solvent, 20 mg of MIP, 500 μL of human urine at pH 9 and no addition of NaCl. Recoveries/relative standard deviation (RSD%) for (R)-(+)-ABZSO and (S)-(−)-ABZSO were 78.2 ± 0.2% and 69.7 ± 1.7%, respectively.