Владимир Александрович Герасимов
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Владимир Александрович Герасимов has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- A. Yu. Filozhenko
Institute of Marine Technology, Problems of the Far-Eastern Branch of the Russian Academy of Sciences,laboratory 07,Vladivostok,Russia
4 shared publications - Anton Komlev
Institute of Marine Technology Problems Far East Branch Russian Academy of Sciences
4 shared publications - Andrey Remezkov
Far Eastern Federal University,Office of Vice-Rector for Research,Vladivostok,Russia
1 shared publication - Anton Katrushenkov
Institute of Marine Technology Problems Far East Branch Russian Academy of Sciences
1 shared publication Far Eastern Federal University
1 shared publication- Nikolai Aleksandrovich Naidenko
Institute of Marine Technology Problems Far East Branch Russian Academy of Sciences
1 shared publication
Latest Publications
- 30 March 2026
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 55 (1) , 23-37
Development and investigation of the functioning process model of an electromagnetic detector for extended bottom objects
When inspecting extended bottom objects, a promising solution is the use of an electromagnetic detector (EMD) installed on an underwater carrier, in particular, an autonomous uninhabited underwater vehicle (AUV). In general, the aim of the EMD is to detect a bottom object and generate signals to control the carrier in order to track the object. The article proposes a new model of the EMD interaction process with an extended bottom object, both with and without an insulating surface coating. The concept of a volumetric field of currents in a conducting medium in the zone of signal emission by transmitting dipoles is introduced. The relationship between the potentials on the receiving dipoles and the physical characteristics of an extended bottom object introduced into the volumetric field of currents is determined. The EMD algorithm, developed earlier at the IMTP FEB RAS, was refined, which made it possible to increase the accuracy of determining the angle of intersection of the AUV course with the bottom object. A mathematical model of the interaction between the EMD and the bottom object is proposed. The adequacy of the model was checked by comparing the simulation results with the physical model of the interaction process at the stand. The results obtained convincingly confirm the validity of the proposed hypothesis about the EMD interaction physical nature with the bottom object and the adequacy of the developed mathematical model. This provides the basis for creating a complete mathematical model of the EMD–AUV complex in order to build and study AUV control algorithms in various object tracking modes.
- 30 March 2026
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 55 (1) , 23-37
Development and investigation of the functioning process model of an electromagnetic detector for extended bottom objects
When inspecting extended bottom objects, a promising solution is the use of an electromagnetic detector (EMD) installed on an underwater carrier, in particular, an autonomous uninhabited underwater vehicle (AUV). In general, the aim of the EMD is to detect a bottom object and generate signals to control the carrier in order to track the object. The article proposes a new model of the EMD interaction process with an extended bottom object, both with and without an insulating surface coating. The concept of a volumetric field of currents in a conducting medium in the zone of signal emission by transmitting dipoles is introduced. The relationship between the potentials on the receiving dipoles and the physical characteristics of an extended bottom object introduced into the volumetric field of currents is determined. The EMD algorithm, developed earlier at the IMTP FEB RAS, was refined, which made it possible to increase the accuracy of determining the angle of intersection of the AUV course with the bottom object. A mathematical model of the interaction between the EMD and the bottom object is proposed. The adequacy of the model was checked by comparing the simulation results with the physical model of the interaction process at the stand. The results obtained convincingly confirm the validity of the proposed hypothesis about the EMD interaction physical nature with the bottom object and the adequacy of the developed mathematical model. This provides the basis for creating a complete mathematical model of the EMD–AUV complex in order to build and study AUV control algorithms in various object tracking modes.
- 23 December 2025
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 54 (4) , 84-96
Research of the using possibility an unmanned surface vehicle as a carrier of a helicopter-type unmanned aerial vehicle
The use of unmanned aerial vehicles (UAV – helicopter-type quadcopters) based on a mobile marine platform in the form of an unmanned surface vehicle (USV) allows solving a number of new problems, both military and dual-use. One of the main issues accompanying such a technical solution is ensuring the retention of the UAV on the USV landing pad and the implementation of contactless transmission of electricity from the USV to the UAV to charge its batteries. There is no information in the available sources about any results in this area, therefore the problem of fixing the UAV on the USV with its battery charge is relevant with an unconditional prospect of practical application. To solve this problem, a USV landing pad was developed, equipped with a matrix of specially designed electromagnets. Switchable interaction between the matrix of electromagnets and the UAV landing elements made it possible to combine the functions of holding the UAV with contactless charging of its batteries in one device. The conducted studies made it possible to determine the requirements for the energy parameters of the holding electromagnets to ensure the UAV is fixed without displacement on the landing pad under given external influences in the form of a certain wind load, as well as roll and vibration. The developed methods of experimental research on a large-scale model of a landing pad with a UAV ensure the reliability of the results. The technical solutions underlying the implementation of the adopted method of basing a UAV on a USV are protected by patents of the Russian Federation. The results obtained will find practical application in patrolling, monitoring and reconnaissance, as well as in relaying signals in communication networks connecting surface ships, aircraft and unmanned aerial vehicles.
- 23 December 2025
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 54 (4) , 84-96
Research of the using possibility an unmanned surface vehicle as a carrier of a helicopter-type unmanned aerial vehicle
The use of unmanned aerial vehicles (UAV – helicopter-type quadcopters) based on a mobile marine platform in the form of an unmanned surface vehicle (USV) allows solving a number of new problems, both military and dual-use. One of the main issues accompanying such a technical solution is ensuring the retention of the UAV on the USV landing pad and the implementation of contactless transmission of electricity from the USV to the UAV to charge its batteries. There is no information in the available sources about any results in this area, therefore the problem of fixing the UAV on the USV with its battery charge is relevant with an unconditional prospect of practical application. To solve this problem, a USV landing pad was developed, equipped with a matrix of specially designed electromagnets. Switchable interaction between the matrix of electromagnets and the UAV landing elements made it possible to combine the functions of holding the UAV with contactless charging of its batteries in one device. The conducted studies made it possible to determine the requirements for the energy parameters of the holding electromagnets to ensure the UAV is fixed without displacement on the landing pad under given external influences in the form of a certain wind load, as well as roll and vibration. The developed methods of experimental research on a large-scale model of a landing pad with a UAV ensure the reliability of the results. The technical solutions underlying the implementation of the adopted method of basing a UAV on a USV are protected by patents of the Russian Federation. The results obtained will find practical application in patrolling, monitoring and reconnaissance, as well as in relaying signals in communication networks connecting surface ships, aircraft and unmanned aerial vehicles.
- 27 June 2025
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 52 (2) , 19-27
Autonomous voltage inverters in the electrical supply systems of underwater objects
Reducing energy losses in autonomous voltage inverters and reducing thermal loads on power switches is becoming particularly relevant in electrical supply systems for underwater facilities. This is due to the difficulty of removing heat from the power elements located in the robust housings of the device and having a number of layout limitations. The use of resonant circuits with constant tuning is limited, since the process of contactless energy transfer is accompanied by a wide range of changes in the load of the inverter, which is associated with possible axial displacements of the primary and secondary parts of the transformer, as well as a change in the gap between these parts when the device is automatically moored to the bottom mooring device. A significant reduction in switching losses in the inverter can be achieved by combining the soft switching mode with minimizing the current of the opposing diodes with a corresponding change in the switching frequency. This property is implemented in the proposed control method. The research of an autonomous voltage inverter on a computer model confirmed the high efficiency of the proposed method for generating inverter control signals. Switching losses in the inverter have been reduced tenfold compared to both conventional control with hard switches and soft switches with constant tuning of the resonant circuit. This property is maintained over a wide range of load variations of the inverter. Solutions to reduce switching losses in contactless energy transmission systems will be useful in power supply systems via a ROV cable line or other tethered underwater facilities as ways to increase the overall efficiency of underwater robotics systems.
- 27 June 2025
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- Vol. 52 (2) , 19-27
Autonomous voltage inverters in the electrical supply systems of underwater objects
Reducing energy losses in autonomous voltage inverters and reducing thermal loads on power switches is becoming particularly relevant in electrical supply systems for underwater facilities. This is due to the difficulty of removing heat from the power elements located in the robust housings of the device and having a number of layout limitations. The use of resonant circuits with constant tuning is limited, since the process of contactless energy transfer is accompanied by a wide range of changes in the load of the inverter, which is associated with possible axial displacements of the primary and secondary parts of the transformer, as well as a change in the gap between these parts when the device is automatically moored to the bottom mooring device. A significant reduction in switching losses in the inverter can be achieved by combining the soft switching mode with minimizing the current of the opposing diodes with a corresponding change in the switching frequency. This property is implemented in the proposed control method. The research of an autonomous voltage inverter on a computer model confirmed the high efficiency of the proposed method for generating inverter control signals. Switching losses in the inverter have been reduced tenfold compared to both conventional control with hard switches and soft switches with constant tuning of the resonant circuit. This property is maintained over a wide range of load variations of the inverter. Solutions to reduce switching losses in contactless energy transmission systems will be useful in power supply systems via a ROV cable line or other tethered underwater facilities as ways to increase the overall efficiency of underwater robotics systems.
- 8 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 001-005
Energy Supply Of The Hybrid UUV And Information Exchange With The Onshore Control Post During The Service Of Underwater Mining Complexes
When developing underwater stations and resident vehicles for subsea mining complexes service systems, it is necessary to solve a number of tasks. Some of them are traditional (for example, the tasks of bringing an underwater vehicle to the station and performing underwater docking). Others are new. Such new tasks include ensuring contactless battery charging and high-speed contactless information exchange between the station and the device. The representation of such a system providing energy and information interaction between a hybrid uninhabited underwater vehicle (HUUV) and a coastal control post in the form of a single complete complex is unknown from the literature. For this reason, the task can be considered relevant, the solution of which will ultimately improve the efficiency of hydrocarbon production. The article presents the results of research carried out in order to build a functional scheme for the interaction of a coastal control post with a hybrid uninhabited underwater vehicle. Such a scheme includes channels of energy and information interaction in a single complex, for which the principles of constructive implementations of basic elements are defined. Interrelated theoretical analysis, mathematical modeling and experimental research are used as accepted research methods.
- 8 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 001-005
Energy Supply Of The Hybrid UUV And Information Exchange With The Onshore Control Post During The Service Of Underwater Mining Complexes
When developing underwater stations and resident vehicles for subsea mining complexes service systems, it is necessary to solve a number of tasks. Some of them are traditional (for example, the tasks of bringing an underwater vehicle to the station and performing underwater docking). Others are new. Such new tasks include ensuring contactless battery charging and high-speed contactless information exchange between the station and the device. The representation of such a system providing energy and information interaction between a hybrid uninhabited underwater vehicle (HUUV) and a coastal control post in the form of a single complete complex is unknown from the literature. For this reason, the task can be considered relevant, the solution of which will ultimately improve the efficiency of hydrocarbon production. The article presents the results of research carried out in order to build a functional scheme for the interaction of a coastal control post with a hybrid uninhabited underwater vehicle. Such a scheme includes channels of energy and information interaction in a single complex, for which the principles of constructive implementations of basic elements are defined. Interrelated theoretical analysis, mathematical modeling and experimental research are used as accepted research methods.
- 29 March 2024
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- No. 1,p. 43-58
Organization of energy and information interaction of the coastal control post with the hybrid underwater vehicle during the maintenance of underwater mining complexes
The creation of underwater stations and resident vehicles for use in underwater conditions, as well as technologies that provide the full range of measures necessary for the placement, maintenance, bringing, reception and release of an underwater vehicle is a new direction in underwater robotics. When developing such systems, it is necessary to solve a number of tasks, some of which are traditional, for example, the tasks of approaching an underwater vehicle to the station and underwater docking. Other tasks are new, such as providing contactless battery charging and high-speed contactless information exchange between the station and the device, as well as organizing high-speed communication of the station with a remote coastal control post. The domestic experience of research on such tasks is limited to solving particular issues. The representation of the energy and information interaction system of an underwater service station, an uninhabited underwater vehicle and a coastal control post in the form of a single complete complex is unknown from the literature. For this reason, mention task is relevant, the solution of which will ultimately improve the efficiency of hydrocarbon production. The present functional diagram, which combines the channels of energy and information interaction into a single complex. The principle of constructive implementation of the basic elements is defined. Accepted research methods include interrelated theoretical analysis, mathematical modeling, and experimental research.
- 29 March 2024
- Published by Far Eastern Branch of the Russian Academy of Sciences in Podvodnye issledovaniia i robototehnika
- No. 1,p. 43-58
Organization of energy and information interaction of the coastal control post with the hybrid underwater vehicle during the maintenance of underwater mining complexes
The creation of underwater stations and resident vehicles for use in underwater conditions, as well as technologies that provide the full range of measures necessary for the placement, maintenance, bringing, reception and release of an underwater vehicle is a new direction in underwater robotics. When developing such systems, it is necessary to solve a number of tasks, some of which are traditional, for example, the tasks of approaching an underwater vehicle to the station and underwater docking. Other tasks are new, such as providing contactless battery charging and high-speed contactless information exchange between the station and the device, as well as organizing high-speed communication of the station with a remote coastal control post. The domestic experience of research on such tasks is limited to solving particular issues. The representation of the energy and information interaction system of an underwater service station, an uninhabited underwater vehicle and a coastal control post in the form of a single complete complex is unknown from the literature. For this reason, mention task is relevant, the solution of which will ultimately improve the efficiency of hydrocarbon production. The present functional diagram, which combines the channels of energy and information interaction into a single complex. The principle of constructive implementation of the basic elements is defined. Accepted research methods include interrelated theoretical analysis, mathematical modeling, and experimental research.