Mohamad Almas Prakasa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohamad Almas Prakasa has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Imam Robandi
Institut Teknologi Sepuluh Nopember
6 shared publications - Muhammad Ruswandi Djalal
Politeknik Negeri Ujung Pandang
5 shared publications Ryo Nishimura
Department of Information and Electronics, Faculty of Engineering, Tottori University, Tottori, Japan
2 shared publications- Alberto Borghetti
University of Bologna
1 shared publication Arimbi Kumala Sari
1 shared publication- Deyndrawan Sutrisno
Universitas Negeri Semarang
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 135968-135992
Coordination of Modified VIC and PSS for Frequency Restoration With Dynamic Damping Enhancement in Hybrid Power Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 135968-135992
Open AccessCoordination of Modified VIC and PSS for Frequency Restoration With Dynamic Damping Enhancement in Hybrid Power Systems
- Open Access
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 2581-2603
Coordinated Design of Power System Stabilizer and Virtual Inertia Control Using Modified Harris Hawk Optimization for Improving Power System Stability
In the current era, power system stability faces typical problems due to the Renewable Energy Sources (RES) integration trend. This trend makes the coordination between power system controllers crucial to maintain stability across a wide-range of operating behaviors. To address this problem, this paper proposes the coordinated design of Power System Stabilizer and Virtual Inertia Control (PSS-VIC) to improve the stability of the power system integrated with RES. The proposed method uses the modified version of Harris Hawk Optimization with Memory Saving Strategy (HHO-MSS) to find the equilibrium point of global parameters of PSS-VIC through various simulations to ensure scalability. In this proposed method, PSS is focused on increasing the power system stability from the traditional generator sides with diesel engines, thermal, and hydro turbines. Meanwhile, the modified VIC design is proposed to increase the power system stability from the RES sides using virtual inertia emulation with the integration of wind generators, solar photovoltaic units, and energy storage systems. The global parameters of PSS-VIC are determined by calculating the optimal damping ratio which is permitted by grid codes alongside various stability criteria validation. Based on the obtained results, HHO-MSS is 1.44% to 9.28% more accurate and 34.63% to 53.94% more consistent than Electric Eel Foraging Optimization (EEFO), and Puma Optimizer (PO), Evolutionary Mating Algorithm (EMA). With the optimal damping ratios of 9.94% to 9.96% achieved by HHO-MSS, the overall power system stability improvements, including both local and interarea responses across 38 simulations involving sudden load changes, varying inertia, and different RES levels, are as follows: 41.17% to 70.89% frequency nadir improvement, 25.9% to 67.38% power angle deviation improvement, 84.83% to 85.26% settling time reduction, and 51.57% to 89.73% average error reduction calculated with performance indices. The proposed coordinated PSS-VIC design offers excellent scalability and can effectively improve power system stability across a wide-range of operating conditions.
- 26 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 2581-2603
Open AccessCoordinated Design of Power System Stabilizer and Virtual Inertia Control Using Modified Harris Hawk Optimization for Improving Power System Stability
In the current era, power system stability faces typical problems due to the Renewable Energy Sources (RES) integration trend. This trend makes the coordination between power system controllers crucial to maintain stability across a wide-range of operating behaviors. To address this problem, this paper proposes the coordinated design of Power System Stabilizer and Virtual Inertia Control (PSS-VIC) to improve the stability of the power system integrated with RES. The proposed method uses the modified version of Harris Hawk Optimization with Memory Saving Strategy (HHO-MSS) to find the equilibrium point of global parameters of PSS-VIC through various simulations to ensure scalability. In this proposed method, PSS is focused on increasing the power system stability from the traditional generator sides with diesel engines, thermal, and hydro turbines. Meanwhile, the modified VIC design is proposed to increase the power system stability from the RES sides using virtual inertia emulation with the integration of wind generators, solar photovoltaic units, and energy storage systems. The global parameters of PSS-VIC are determined by calculating the optimal damping ratio which is permitted by grid codes alongside various stability criteria validation. Based on the obtained results, HHO-MSS is 1.44% to 9.28% more accurate and 34.63% to 53.94% more consistent than Electric Eel Foraging Optimization (EEFO), and Puma Optimizer (PO), Evolutionary Mating Algorithm (EMA). With the optimal damping ratios of 9.94% to 9.96% achieved by HHO-MSS, the overall power system stability improvements, including both local and interarea responses across 38 simulations involving sudden load changes, varying inertia, and different RES levels, are as follows: 41.17% to 70.89% frequency nadir improvement, 25.9% to 67.38% power angle deviation improvement, 84.83% to 85.26% settling time reduction, and 51.57% to 89.73% average error reduction calculated with performance indices. The proposed coordinated PSS-VIC design offers excellent scalability and can effectively improve power system stability across a wide-range of operating conditions.
- Open Access
- 28 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76707-76734
Stability Improvement of Sulselrabar System With Integrated Wind Power Plant Using Multi-Band PSS3C Based Mayfly Optimization Algorithm
The introduction of additional controllers is essential in modern electric power systems to enhance their stability, particularly during disturbances. One effective method is the implementation of power system stabilizers (PSS). However, precise coordination of PSS equipment is necessary to determine the optimal locations and parameters. This study focuses on the optimal analysis of Multi-Band PSS3C (MB-PSS3C) coordination in integrated Wind Power Plant (WPP) systems in South, Southeast, and West Sulawesi (Sulselrabar). An artificial intelligence approach, utilizing the Mayfly Optimization Algorithm (MOA), is suggested for optimizing both the location and parameters of the PSS. Comparative investigations were conducted to assess the efficacy of MB-PSS3C in comparison with SB-PSS1A and MB-PSS2B, based on previous research. The performance analysis employed the time domain simulation method, reviewing the speed deviation response, field voltage response, PSS output voltage response, and rotor angle response for each generator. Eigenvalue analysis was performed for each control scheme. Load changes were applied to generators 1 (BAKARU) and 11 (WPP SIDRAP) to evaluate the performance of the system. The application of the MOA-based MB-PSS3C results in an increased damping ratio, improved speed response, and a more optimal rotor angle. MB-PSS3C provides a larger additional damping signal to the generator exciter, as indicated by the increase in the field voltage on the generator.
- 28 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76707-76734
Open AccessStability Improvement of Sulselrabar System With Integrated Wind Power Plant Using Multi-Band PSS3C Based Mayfly Optimization Algorithm
The introduction of additional controllers is essential in modern electric power systems to enhance their stability, particularly during disturbances. One effective method is the implementation of power system stabilizers (PSS). However, precise coordination of PSS equipment is necessary to determine the optimal locations and parameters. This study focuses on the optimal analysis of Multi-Band PSS3C (MB-PSS3C) coordination in integrated Wind Power Plant (WPP) systems in South, Southeast, and West Sulawesi (Sulselrabar). An artificial intelligence approach, utilizing the Mayfly Optimization Algorithm (MOA), is suggested for optimizing both the location and parameters of the PSS. Comparative investigations were conducted to assess the efficacy of MB-PSS3C in comparison with SB-PSS1A and MB-PSS2B, based on previous research. The performance analysis employed the time domain simulation method, reviewing the speed deviation response, field voltage response, PSS output voltage response, and rotor angle response for each generator. Eigenvalue analysis was performed for each control scheme. Load changes were applied to generators 1 (BAKARU) and 11 (WPP SIDRAP) to evaluate the performance of the system. The application of the MOA-based MB-PSS3C results in an increased damping ratio, improved speed response, and a more optimal rotor angle. MB-PSS3C provides a larger additional damping signal to the generator exciter, as indicated by the increase in the field voltage on the generator.
- Open Access
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76219-76243
A Hybrid Controlling Parameters of Power System Stabilizer and Virtual Inertia Using Harris Hawk Optimizer in Interconnected Renewable Power Systems
A hybrid controlling method for stability controllers is needed in the interconnected renewable power systems due to the working conditions being diverse from low to high levels of Renewable Energy Sources (RES). Power System Stabilizer and Virtual Inertia (PSS-VI) are viable to provide a wider enhancement effect in the stability. This paper proposes a new approach to enhance the stability of interconnected renewable power systems by hybrid controlling parameters of PSS-VI. A robust optimizer based on Harris Hawk Optimizer (HHO) was established. Interconnected renewable power systems are modeled based on multi-area power systems with different energy resources, including conventional generators, Solar Power Generation (SPG), and Wind Power Generation (WPG). Besides that, the Battery Storage System (BSS) is also dispatched to realize the virtual inertia emulation. The optimal parameters by HHO are compared with the other recent novel algorithms. The optimal controlling parameters of PSS-VI by HHO in interconnected renewable power systems performed in low to high RES conditions. HHO can offer the best fitness value in faster iterations than the compared algorithms. The results of hybrid controlling parameters by HHO can significantly suppress the Rate of Change of Frequency (RoCoF) by 5.99% and 4.89% in low-RES and high-RES conditions, respectively. Moreover, the hybrid controlling parameters for PSS-VI offer smoother response and transition in frequency and inter-area power exchange responses.
- 27 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 76219-76243
Open AccessA Hybrid Controlling Parameters of Power System Stabilizer and Virtual Inertia Using Harris Hawk Optimizer in Interconnected Renewable Power Systems
A hybrid controlling method for stability controllers is needed in the interconnected renewable power systems due to the working conditions being diverse from low to high levels of Renewable Energy Sources (RES). Power System Stabilizer and Virtual Inertia (PSS-VI) are viable to provide a wider enhancement effect in the stability. This paper proposes a new approach to enhance the stability of interconnected renewable power systems by hybrid controlling parameters of PSS-VI. A robust optimizer based on Harris Hawk Optimizer (HHO) was established. Interconnected renewable power systems are modeled based on multi-area power systems with different energy resources, including conventional generators, Solar Power Generation (SPG), and Wind Power Generation (WPG). Besides that, the Battery Storage System (BSS) is also dispatched to realize the virtual inertia emulation. The optimal parameters by HHO are compared with the other recent novel algorithms. The optimal controlling parameters of PSS-VI by HHO in interconnected renewable power systems performed in low to high RES conditions. HHO can offer the best fitness value in faster iterations than the compared algorithms. The results of hybrid controlling parameters by HHO can significantly suppress the Rate of Change of Frequency (RoCoF) by 5.99% and 4.89% in low-RES and high-RES conditions, respectively. Moreover, the hybrid controlling parameters for PSS-VI offer smoother response and transition in frequency and inter-area power exchange responses.
- Open Access
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 73849-73878
A New Scheme of Harris Hawk Optimizer With Memory Saving Strategy (HHO-MSS) for Controlling Parameters of Power System Stabilizer and Virtual Inertia in Renewable Microgrid Power System
Renewable microgrid power systems confront a typical stability challenge due to the deficiency of damping and inertia properties. It can be maintained by controlling the parameters of the Power System Stabilizer (PSS) and Virtual Inertia (VI). This paper proposes a new approach for controlling the optimal parameters of PSS and VI in the renewable microgrid power system consisting of a conventional generator, Photovoltaic Energy System (PVES), Wind Turbine Energy System (WTES), and Battery Energy Storage System (BESS). A new scheme of Harris Hawk Optimizer with Memory Saving Strategy (HHO-MSS) is proposed as the optimizer. Benson Scalarization Technique is also introduced to combine objective functions based on damping factor and damping ratio. Using the Friedman Ranking Test, the HHO-MSS has shown superior performance in exploration and exploitation processes over the other modified versions of HHO and basic algorithms. Moreover, using a convergence curve and proportion analysis has shown that HHO-MSS has a significant improvement in the balance of exploration and proportion. The optimal parameters are investigated by eigenvalue and time domain analysis in low, mid, high, and full RES penetrations. The HHO-MSS gives a better fitness value of 9% to 26% compared to the other algorithms. The analysis shows that PSS gives better stability improvement than VI in low and mid RES penetrations. On the other hand, VI gives better stability improvement than PSS in high and full RES penetrations. The proposed approach with controlling parameters of PSS and VI by HHO-MSS justifies the best stability improvement in all RES penetrations with optimal Rate of Change of Frequency (RoCoF) reduction, smallest overshoot, and smoothest frequency and power angle responses. Moreover, it has the highest average error reduction of 47.26% when validated with performance indexes.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 73849-73878
Open AccessA New Scheme of Harris Hawk Optimizer With Memory Saving Strategy (HHO-MSS) for Controlling Parameters of Power System Stabilizer and Virtual Inertia in Renewable Microgrid Power System
Renewable microgrid power systems confront a typical stability challenge due to the deficiency of damping and inertia properties. It can be maintained by controlling the parameters of the Power System Stabilizer (PSS) and Virtual Inertia (VI). This paper proposes a new approach for controlling the optimal parameters of PSS and VI in the renewable microgrid power system consisting of a conventional generator, Photovoltaic Energy System (PVES), Wind Turbine Energy System (WTES), and Battery Energy Storage System (BESS). A new scheme of Harris Hawk Optimizer with Memory Saving Strategy (HHO-MSS) is proposed as the optimizer. Benson Scalarization Technique is also introduced to combine objective functions based on damping factor and damping ratio. Using the Friedman Ranking Test, the HHO-MSS has shown superior performance in exploration and exploitation processes over the other modified versions of HHO and basic algorithms. Moreover, using a convergence curve and proportion analysis has shown that HHO-MSS has a significant improvement in the balance of exploration and proportion. The optimal parameters are investigated by eigenvalue and time domain analysis in low, mid, high, and full RES penetrations. The HHO-MSS gives a better fitness value of 9% to 26% compared to the other algorithms. The analysis shows that PSS gives better stability improvement than VI in low and mid RES penetrations. On the other hand, VI gives better stability improvement than PSS in high and full RES penetrations. The proposed approach with controlling parameters of PSS and VI by HHO-MSS justifies the best stability improvement in all RES penetrations with optimal Rate of Change of Frequency (RoCoF) reduction, smallest overshoot, and smoothest frequency and power angle responses. Moreover, it has the highest average error reduction of 47.26% when validated with performance indexes.
- Open Access
- 22 December 2013
- Published by National Research and Innovation Agency in Journal of Mechatronics, Electrical Power, and Vehicular Technology
- Vol. 4 (2) , 127-134
MPPT Based on Fuzzy Logic Controller (FLC) for Photovoltaic (PV) System in Solar Car
This paper presents a control called Maximum Power Point Tracking (MPPT) for photovoltaic (PV) system in a solar car. The main purpose of this system is to extracts PV power maximally while keeping small losses using a simple design of converter. Working principle of MPPT based fuzzy logic controller (MPPT-FLC) is to get desirable values of reference current and voltage. MPPT-FLC compares them with the values of the PV's actual current and voltage to control duty cycle value. Then the duty cycle value is used to adjust the angle of ignition switch (MOSFET gate) on the Boost converter. The proposed method was shown through a simulation performed using PSIM and MATLAB software. Simulation results show that the system is able to improve the PV power extraction efficiency significantly by approximately 98% of PV’s power.
- 22 December 2013
- Published by National Research and Innovation Agency in Journal of Mechatronics, Electrical Power, and Vehicular Technology
- Vol. 4 (2) , 127-134
Open AccessMPPT Based on Fuzzy Logic Controller (FLC) for Photovoltaic (PV) System in Solar Car
This paper presents a control called Maximum Power Point Tracking (MPPT) for photovoltaic (PV) system in a solar car. The main purpose of this system is to extracts PV power maximally while keeping small losses using a simple design of converter. Working principle of MPPT based fuzzy logic controller (MPPT-FLC) is to get desirable values of reference current and voltage. MPPT-FLC compares them with the values of the PV's actual current and voltage to control duty cycle value. Then the duty cycle value is used to adjust the angle of ignition switch (MOSFET gate) on the Boost converter. The proposed method was shown through a simulation performed using PSIM and MATLAB software. Simulation results show that the system is able to improve the PV power extraction efficiency significantly by approximately 98% of PV’s power.