Yunhao Jiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yunhao Jiao has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Hongyu Shi
Ministry of Education Key Laboratory for Multifunctional Materials and Structures, Xian Jiaotong University, Xian, China
8 shared publications - Xiaoming Chen
Xi’an Jiaotong University
8 shared publications - Anxue Zhang
Xi’an Jiaotong University
7 shared publications - Juan Chen
School of Information and Communications Engineering Xi'an Jiaotong University Xi'an China
7 shared publications - Jianjia Yi
School of Information and Communications Engineering, Xian Jiaotong University, Xian, China
6 shared publications - Haiwen Liu
State Key Laboratory of Radio Frequency Heterogeneous Integration, Shenzhen University, Shenzhen, China
2 shared publications
Latest Publications
- 2 November 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (11)
An Efficient MPI‐Based Parallel Implementation of WCS‐FDTD Method
A parallel weakly conditionally stable finite‐difference time‐domain (WCS‐FDTD) method based on the message passing interface is proposed. It enables efficient simulation of large‐scale problems with fine structures in two directions. By employing a flexible domain decomposition strategy and efficient inter‐process communication, a scalable parallel implementation of the WCS‐FDTD method is realized. Furthermore, redundant coefficient matrices are eliminated according to the target characteristics and further compressed, significantly reducing the memory consumption. The Thomas algorithm is incorporated into the implicit field‐updating procedure, leading to additional acceleration of the computation. Numerical results demonstrate that the proposed method maintains good accuracy while achieving a significant reduction in memory consumption and an improvement in computational performance, achieving a parallel efficiency of approximately 90% when using 32 processors.
- 2 November 2026
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 68 (11)
An Efficient MPI‐Based Parallel Implementation of WCS‐FDTD Method
A parallel weakly conditionally stable finite‐difference time‐domain (WCS‐FDTD) method based on the message passing interface is proposed. It enables efficient simulation of large‐scale problems with fine structures in two directions. By employing a flexible domain decomposition strategy and efficient inter‐process communication, a scalable parallel implementation of the WCS‐FDTD method is realized. Furthermore, redundant coefficient matrices are eliminated according to the target characteristics and further compressed, significantly reducing the memory consumption. The Thomas algorithm is incorporated into the implicit field‐updating procedure, leading to additional acceleration of the computation. Numerical results demonstrate that the proposed method maintains good accuracy while achieving a significant reduction in memory consumption and an improvement in computational performance, achieving a parallel efficiency of approximately 90% when using 32 processors.
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (21) , 49864-49872
A Continuously Reconfigurable Linear Polarization Antenna for Aerial IoT Platforms
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 13 (21) , 49864-49872
A Continuously Reconfigurable Linear Polarization Antenna for Aerial IoT Platforms
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (6) , 5924-5929
Amplitude-Induced Phase Modulation and Its Application to High-Gain Full-Polarization-Tunable Transmitarray Antenna
In this work, an amplitude-induced phase control method is proposed to achieve phase modulation by performing vector synthesis of two components with a tunable amplitude ratio. With a fixed phase difference between the components, continuous phase tuning of the synthesized wave is achieved by adjusting their amplitude ratio. A dual-output element based on a guided-wave structure is designed, enabling both outputs to provide a full 360° phase shift. In this element, tuning the amplitude ratio also controls the phase difference between the two outputs, enabling polarization manipulation of the transmitted wave. A high-gain full-polarization-tunable transmitarray antenna is subsequently designed, fabricated, and measured. Simulated and measured results validate the effectiveness of the proposed phase control method. The transmitarray antenna demonstrates significant advantages in aperture efficiency and polarization tunability. Furthermore, the proposed method requires no active components, avoiding static power consumption and thus making it suitable for power-constrained scenarios such as satellite communications, UAVs, and and Internet of Things (IoT) applications.
- 5 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (6) , 5924-5929
Amplitude-Induced Phase Modulation and Its Application to High-Gain Full-Polarization-Tunable Transmitarray Antenna
In this work, an amplitude-induced phase control method is proposed to achieve phase modulation by performing vector synthesis of two components with a tunable amplitude ratio. With a fixed phase difference between the components, continuous phase tuning of the synthesized wave is achieved by adjusting their amplitude ratio. A dual-output element based on a guided-wave structure is designed, enabling both outputs to provide a full 360° phase shift. In this element, tuning the amplitude ratio also controls the phase difference between the two outputs, enabling polarization manipulation of the transmitted wave. A high-gain full-polarization-tunable transmitarray antenna is subsequently designed, fabricated, and measured. Simulated and measured results validate the effectiveness of the proposed phase control method. The transmitarray antenna demonstrates significant advantages in aperture efficiency and polarization tunability. Furthermore, the proposed method requires no active components, avoiding static power consumption and thus making it suitable for power-constrained scenarios such as satellite communications, UAVs, and and Internet of Things (IoT) applications.
- 11 February 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6) , 066003
Inverse design of a phase shift circuit using deep learning and particle swarm optimization for simultaneous amplitude and phase control
This work presents an inverse design method for a π -type phase-shift circuit using deep learning and particle swarm optimization (DL-PSO). The proposed framework enables simultaneous control of amplitude and phase in reconfigurable arrays, including reconfigurable intelligent surfaces. The DL-PSO method resolves the non-unique mapping problem and enables precise control of both amplitude and phase. An external PSO loop optimizes fixed structural parameters by evaluating amplitude performance over a full 360° phase range. A prototype operating at 2.8 GHz was fabricated and measured. It achieves full-range phase tuning with a maximum amplitude fluctuation of 0.6 dB and an average phase error of 1.92°. Accurate amplitude control is also achieved at multiple target levels across the 360° phase range, with average amplitude and phase errors of 0.16 dB and 1.76°, respectively. The proposed method is scalable for reconfigurable array applications such as beam shaping and null steering.
- 11 February 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (6) , 066003
Inverse design of a phase shift circuit using deep learning and particle swarm optimization for simultaneous amplitude and phase control
This work presents an inverse design method for a π -type phase-shift circuit using deep learning and particle swarm optimization (DL-PSO). The proposed framework enables simultaneous control of amplitude and phase in reconfigurable arrays, including reconfigurable intelligent surfaces. The DL-PSO method resolves the non-unique mapping problem and enables precise control of both amplitude and phase. An external PSO loop optimizes fixed structural parameters by evaluating amplitude performance over a full 360° phase range. A prototype operating at 2.8 GHz was fabricated and measured. It achieves full-range phase tuning with a maximum amplitude fluctuation of 0.6 dB and an average phase error of 1.92°. Accurate amplitude control is also achieved at multiple target levels across the 360° phase range, with average amplitude and phase errors of 0.16 dB and 1.76°, respectively. The proposed method is scalable for reconfigurable array applications such as beam shaping and null steering.
- 23 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1039-1043
A Saddle-Pattern Dual-CP DRA for Wide-Angle Scanning Array With Low Gain Fluctuation
A saddle-pattern dual circularly polarized (CP) dielectric resonator antenna (DRA) with a broad half-power beamwidth (HPBW) and axial ratio beamwidth (ARBW) is proposed in this letter. A circular patch fed by two orthogonally placed dual L-probes is utilized for dual-polarized operation, and a cylindrical dielectric resonator (CDR) excited by the patch is located on the top of the proposed DRA, which is used as the main radiator. An optimized air slot is loaded in the CDR to strengthen the side radiation, and an electromagnetic bandgap (EBG) structure surrounding the slot loaded CDR is used for reducing normal radiation and further enhancing low-elevation radiation, thereby achieving a saddle-shaped wide beam for the proposed antenna. The proposed DRA exhibits a saddle-shaped pattern in both E- and H-planes, with HPBW of more than 160° and 3dB ARBW exceeding 175° in 19.7GHz-22.7GHz. Based on the proposed DRA element,the left hand circular polarization (LHCP) 1×8 array antennas with two feeding networks corresponding to scanning angles of 0° and 70° are designed, fabricated and measured, demonstrating a ±70° scanning ability with only 1.23 dBic low gain fluctuation (GF) and a 3 dB axial ratio bandwidth of 14.1%.
- 23 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1039-1043
A Saddle-Pattern Dual-CP DRA for Wide-Angle Scanning Array With Low Gain Fluctuation
A saddle-pattern dual circularly polarized (CP) dielectric resonator antenna (DRA) with a broad half-power beamwidth (HPBW) and axial ratio beamwidth (ARBW) is proposed in this letter. A circular patch fed by two orthogonally placed dual L-probes is utilized for dual-polarized operation, and a cylindrical dielectric resonator (CDR) excited by the patch is located on the top of the proposed DRA, which is used as the main radiator. An optimized air slot is loaded in the CDR to strengthen the side radiation, and an electromagnetic bandgap (EBG) structure surrounding the slot loaded CDR is used for reducing normal radiation and further enhancing low-elevation radiation, thereby achieving a saddle-shaped wide beam for the proposed antenna. The proposed DRA exhibits a saddle-shaped pattern in both E- and H-planes, with HPBW of more than 160° and 3dB ARBW exceeding 175° in 19.7GHz-22.7GHz. Based on the proposed DRA element,the left hand circular polarization (LHCP) 1×8 array antennas with two feeding networks corresponding to scanning angles of 0° and 70° are designed, fabricated and measured, demonstrating a ±70° scanning ability with only 1.23 dBic low gain fluctuation (GF) and a 3 dB axial ratio bandwidth of 14.1%.
- Open Access
- 9 October 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (14)
Generating sub-diffraction microwave needle beam for nondestructive testing by multifunctional transmissive metasurfaces
Sub-diffraction needle beams with high intensity, sub-diffraction focal size, and long depth of focus (DOF) have attracted many researchers’ attention. However, the traditional methods for needle beam generation typically require many devices, such as phase elements, amplitude filters, and lens, which leads to a complex and bulky system and unfavorable for their integration. To address these challenges, we use a single multifunctional transmissive metasurface to convert a linearly polarized plane wave into a needle beam in the microwave range. The guided wave inspired unit cells of the proposed metasurface is designed to simultaneously and independently modulate the polarization and phase of transmitted waves. By imposing the desired polarization and phase distributions on the metasurface, the proposed multifunctional transmissive metasurface can efficiently generate a needle beam with subdiffraction size and extended DOF at 10 GHz when it is illuminated by an x-polarized wave. The proposed metasurface is fabricated, and a sub-diffraction needle beam with good performance is obtained in our measurements. In addition, a proof-of-concept of a high-resolution nondestructive testing experiment based on our designed metasurface is accomplished. Our work is expected to have potential applications in nondestructive testing of materials and structures.
- 9 October 2024
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 136 (14)
Open AccessGenerating sub-diffraction microwave needle beam for nondestructive testing by multifunctional transmissive metasurfaces
Sub-diffraction needle beams with high intensity, sub-diffraction focal size, and long depth of focus (DOF) have attracted many researchers’ attention. However, the traditional methods for needle beam generation typically require many devices, such as phase elements, amplitude filters, and lens, which leads to a complex and bulky system and unfavorable for their integration. To address these challenges, we use a single multifunctional transmissive metasurface to convert a linearly polarized plane wave into a needle beam in the microwave range. The guided wave inspired unit cells of the proposed metasurface is designed to simultaneously and independently modulate the polarization and phase of transmitted waves. By imposing the desired polarization and phase distributions on the metasurface, the proposed multifunctional transmissive metasurface can efficiently generate a needle beam with subdiffraction size and extended DOF at 10 GHz when it is illuminated by an x-polarized wave. The proposed metasurface is fabricated, and a sub-diffraction needle beam with good performance is obtained in our measurements. In addition, a proof-of-concept of a high-resolution nondestructive testing experiment based on our designed metasurface is accomplished. Our work is expected to have potential applications in nondestructive testing of materials and structures.
- 10 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (6) , 5047-5056
Phase-Only-Induced Independent Full-Range Amplitude and Phase Manipulations Using Dual-Channel Transmitarrays
This paper proposes an amplitude-phase independent modulation mechanism and a transmitarray element based on this mechanism. The proposed mechanism can provide full-range linear modulation of amplitude and phase only by controlling the propagation phase without extensive calculations and simulations. In the proposed element, the linearly polarized incident waves are introduced into two channels connecting a differential feed network. The phase of the waves in the two channels is fully and independently controlled by the transmission line length. In addition, an amplitude modulation from 0 to 1 is achieved by changing the phase difference between the two channels. The proposed method is experimentally verified using a transmitarray antenna (TA) with a high gain and a low sidelobe level (SLL). The results demonstrate its effectiveness in amplitude and phase modulation, as well as the performance of the transmitarray element. The proposed mechanism could also be applied to metasurface and phased arrays.
- 10 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (6) , 5047-5056
Phase-Only-Induced Independent Full-Range Amplitude and Phase Manipulations Using Dual-Channel Transmitarrays
This paper proposes an amplitude-phase independent modulation mechanism and a transmitarray element based on this mechanism. The proposed mechanism can provide full-range linear modulation of amplitude and phase only by controlling the propagation phase without extensive calculations and simulations. In the proposed element, the linearly polarized incident waves are introduced into two channels connecting a differential feed network. The phase of the waves in the two channels is fully and independently controlled by the transmission line length. In addition, an amplitude modulation from 0 to 1 is achieved by changing the phase difference between the two channels. The proposed method is experimentally verified using a transmitarray antenna (TA) with a high gain and a low sidelobe level (SLL). The results demonstrate its effectiveness in amplitude and phase modulation, as well as the performance of the transmitarray element. The proposed mechanism could also be applied to metasurface and phased arrays.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4670-4675
Polarization-Correlation-Based Metasurface for Full-Space Independent Amplitude and Phase Modulation
In this work, a novel amplitude modulation mechanism, namely polarization correlation, is proposed. And a transmission-reflection-integrated element with flexible polarization conversion based on the proposed mechanism is designed and verified. The proposed element features two channels for transmission and reflection with an ability to modulate the amplitude and phase independently. The amplitude ratio of transmission and reflection can be adjusted from 1:1 to full transmission without reflection. Several transmission-reflection-integrated metasurfaces (MSs) are also designed for verification. The simulated and measured results finally demonstrate the polarization correlation mechanism and the performance of the proposed element and also show that the proposed MS holds immense potential in the applications that require full space manipulation of electromagnetic (EM) waves, such as point-to-multipoint communications and bidirectional imaging.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4670-4675
Polarization-Correlation-Based Metasurface for Full-Space Independent Amplitude and Phase Modulation
In this work, a novel amplitude modulation mechanism, namely polarization correlation, is proposed. And a transmission-reflection-integrated element with flexible polarization conversion based on the proposed mechanism is designed and verified. The proposed element features two channels for transmission and reflection with an ability to modulate the amplitude and phase independently. The amplitude ratio of transmission and reflection can be adjusted from 1:1 to full transmission without reflection. Several transmission-reflection-integrated metasurfaces (MSs) are also designed for verification. The simulated and measured results finally demonstrate the polarization correlation mechanism and the performance of the proposed element and also show that the proposed MS holds immense potential in the applications that require full space manipulation of electromagnetic (EM) waves, such as point-to-multipoint communications and bidirectional imaging.