Dian Purnamasari
Research Subjects
Dian Purnamasari has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Ahmad Firdhaus
Diponegoro University
1 shared publication - Endah Suwarni
Research Center for Hydrodynamic Technology, National Research and Innovation Agency (BRIN), Indonesia
1 shared publication Happy Nabila Sukmawardana
Department of Naval Architecture, Pembangunan Nasional “Veteran” Jakarta University, Indonesia
1 shared publicationM Nasir
Indonesian Hydrodynamic Laboratory
1 shared publicationMohammad Ridwan Utina
Research Center for Hydrodynamic Technology, National Research and Innovation Agency (BRIN), Indonesia
1 shared publication- Muhammad Luqman Hakim
Department of Naval Architecture, Faculty of Engineering, Universitas Diponegoro
1 shared publication
Latest Publications
- Open Access
- 10 November 2025
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
- Vol. 23 (1) , 63-75
CFD-Based Analysis of Wingsail Shape and Placement on a Fishing Vessel in Southern Bali Waters
The maritime transportation sector contributes significantly to atmospheric emissions due to its reliance on fossil fuels, underscoring the need for more energy-efficient, environmentally friendly propulsion technologies. One promising solution is Wind-Assisted Ship Propulsion (WASP), which uses wind energy as a supplemental power source for vessel propulsion. Among various WASP technologies, wingsails have attracted attention for their rigid airfoil geometry and their ability to generate aerodynamic lift efficiently. This study aims to investigate the influence of wing sail shape and placement on aerodynamic performance, to identify an effective configuration for vessel applications. Computational Fluid Dynamics (CFD) simulations are conducted using k- SST turbulence model. Two symmetric airfoil profiles, NACA 0012 and NACA 0015, are examined under angle of attack variations of 5°, 0°, 5°, 10°, 15°, and 20°. The wingsail is modeled in two installation configurations: midship and a combined midship-aft arrangement. Simulations are performed at wind speeds of 4 m/s, 10 m/s, 13.7 m/s, and 17.2 m/s, with aerodynamic performance evaluated based on the lift and drag coefficients. Based on the results, the NACA 0015 wingsail shows more stable aerodynamic behavior than the NACA 0012, while medium wind speeds in the range of 10–13.7 m/s offer the best balance between lift and drag. In addition, the midship–aft wingsail arrangement consistently generates higher lift than the single midship configuration, making the NACA 0015 wingsail with midship–aft placement the most suitable choice for fishing vessel applications.
- 10 November 2025
- Published by Institute of Research and Community Services Diponegoro University (LPPM UNDIP) in Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan
- Vol. 23 (1) , 63-75
Open AccessCFD-Based Analysis of Wingsail Shape and Placement on a Fishing Vessel in Southern Bali Waters
The maritime transportation sector contributes significantly to atmospheric emissions due to its reliance on fossil fuels, underscoring the need for more energy-efficient, environmentally friendly propulsion technologies. One promising solution is Wind-Assisted Ship Propulsion (WASP), which uses wind energy as a supplemental power source for vessel propulsion. Among various WASP technologies, wingsails have attracted attention for their rigid airfoil geometry and their ability to generate aerodynamic lift efficiently. This study aims to investigate the influence of wing sail shape and placement on aerodynamic performance, to identify an effective configuration for vessel applications. Computational Fluid Dynamics (CFD) simulations are conducted using k- SST turbulence model. Two symmetric airfoil profiles, NACA 0012 and NACA 0015, are examined under angle of attack variations of 5°, 0°, 5°, 10°, 15°, and 20°. The wingsail is modeled in two installation configurations: midship and a combined midship-aft arrangement. Simulations are performed at wind speeds of 4 m/s, 10 m/s, 13.7 m/s, and 17.2 m/s, with aerodynamic performance evaluated based on the lift and drag coefficients. Based on the results, the NACA 0015 wingsail shows more stable aerodynamic behavior than the NACA 0012, while medium wind speeds in the range of 10–13.7 m/s offer the best balance between lift and drag. In addition, the midship–aft wingsail arrangement consistently generates higher lift than the single midship configuration, making the NACA 0015 wingsail with midship–aft placement the most suitable choice for fishing vessel applications.
- 21 March 2024
- Published by Elsevier in Ocean Engineering
- Vol. 301
Prediction of the impact of biofouling roughness on a full-scale planing boat performance using CFD
- 21 March 2024
- Published by Elsevier in Ocean Engineering
- Vol. 301
Prediction of the impact of biofouling roughness on a full-scale planing boat performance using CFD
- Open Access
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1081 (1) , 012025
A Computational of benchmark model of resistance test at Indonesian Hydrodynamic Laboratory
Benchmarking are the activity of comparison of different methods, procedures, physical models to obtain the same target in order to achieve a better standard of performance and exercises provide a common basis for validation of numerical methods. The work develops on prior studies into benchmarks and uncertainty analysis for ship model resistance tests of LHI-007 was used for benchmark testing from 2010 to 2020 at the Indonesian Hydrodynamic Laboratory. A computational study based on the free-surface capturing approach performed with the FINE/Marine flow solver to predicted total resistance in calm water of four speed (1.63 m/s - 2.47 m/s). Verification and validation method studied uncertainty analysis for both for experimental and computational following the ITTC guidelines. The results show comparison between computed results and previous published experimental tests of total resistance (R T ) and coefficient total resistance (C T ) are done to validated CFD simulations. The result of this study concludes that predicted resistance of the benchmark model has reasonable accuracy that the present solver.
- 1 September 2022
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 1081 (1) , 012025
Open AccessA Computational of benchmark model of resistance test at Indonesian Hydrodynamic Laboratory
Benchmarking are the activity of comparison of different methods, procedures, physical models to obtain the same target in order to achieve a better standard of performance and exercises provide a common basis for validation of numerical methods. The work develops on prior studies into benchmarks and uncertainty analysis for ship model resistance tests of LHI-007 was used for benchmark testing from 2010 to 2020 at the Indonesian Hydrodynamic Laboratory. A computational study based on the free-surface capturing approach performed with the FINE/Marine flow solver to predicted total resistance in calm water of four speed (1.63 m/s - 2.47 m/s). Verification and validation method studied uncertainty analysis for both for experimental and computational following the ITTC guidelines. The results show comparison between computed results and previous published experimental tests of total resistance (R T ) and coefficient total resistance (C T ) are done to validated CFD simulations. The result of this study concludes that predicted resistance of the benchmark model has reasonable accuracy that the present solver.