Hui Peng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hui Peng has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Yigang Lv
Key Laboratory of Advanced Engineering Materials, Structure Behavior and Functional Control of University of Hunan Province, Changsha University of Science & Technology, Changsha 410114, China
5 shared publications - Miao Su
School of Civil and Environmental Engineering, Changsha University of Science and Technology, Changsha 410114, China
4 shared publications - Weiwei Han
School of Traffic & Transportation Engineering, Changsha University of Science & Technology, Changsha 410114, China
4 shared publications - Bai Zhang
School of Civil and Environmental Engineering Changsha University of Science and Technology Changsha China
2 shared publications - Cui Wang
School of Civil Engineering, Changsha University of Science & Technology, Changsha 410114, China
2 shared publications - Hui Chen
School of Civil and Environmental Engineering, Changsha University of Science and Technology, Changsha, China
2 shared publications
Latest Publications
- 9 October 2025
- Published by Springer Nature in Journal of Elasticity
- Vol. 157 (4) , 1-20
Characterization of the Mooney-Rivlin and Arruda-Boyce Constitutive Model Parameters for Rubber-Like Materials by Cono-Spherical Indentation Method
- 9 October 2025
- Published by Springer Nature in Journal of Elasticity
- Vol. 157 (4) , 1-20
Characterization of the Mooney-Rivlin and Arruda-Boyce Constitutive Model Parameters for Rubber-Like Materials by Cono-Spherical Indentation Method
- Open Access
Creep Differences Between Alkali-Activated Fly Ash–Slag and Cement-Based Materials and Prediction Models
Alkali-activated fly ash and slag binders are regarded as environmentally friendly building materials. However, the creep properties of the alkali-activated materials differ from ordinary Portland cement-based materials. Currently, predicting the creep properties of alkali-activated materials is difficult. This study tested the creep properties of alkali-activated materials with various strengths and loading ages, exploring the similarities and differences in the creep properties between alkali-activated and cement-based materials. The result shows that the creep development of alkali-activated materials still conforms to the law of the hyperbolic power function commonly used to describe that of cement-based materials. Nevertheless, the proportion of the basic creep increases to about 70% of the drying creep in alkali-activated materials at 90 days. By modifying the parameters related to the relative humidity in the model of CEB-FIP MC2010, the creep behavior of alkali-activated fly ash and slag concrete could be well predicted.
Open AccessCreep Differences Between Alkali-Activated Fly Ash–Slag and Cement-Based Materials and Prediction Models
Alkali-activated fly ash and slag binders are regarded as environmentally friendly building materials. However, the creep properties of the alkali-activated materials differ from ordinary Portland cement-based materials. Currently, predicting the creep properties of alkali-activated materials is difficult. This study tested the creep properties of alkali-activated materials with various strengths and loading ages, exploring the similarities and differences in the creep properties between alkali-activated and cement-based materials. The result shows that the creep development of alkali-activated materials still conforms to the law of the hyperbolic power function commonly used to describe that of cement-based materials. Nevertheless, the proportion of the basic creep increases to about 70% of the drying creep in alkali-activated materials at 90 days. By modifying the parameters related to the relative humidity in the model of CEB-FIP MC2010, the creep behavior of alkali-activated fly ash and slag concrete could be well predicted.
- 15 August 2025
- Published by Elsevier in Environmental Research
- Vol. 285 (Pt 4) , 122600
Enhancing carbonation resistance of alkali-activated fly ash-slag pastes: Role of albite and dolomite additives
- 15 August 2025
- Published by Elsevier in Environmental Research
- Vol. 285 (Pt 4) , 122600
Enhancing carbonation resistance of alkali-activated fly ash-slag pastes: Role of albite and dolomite additives
- 15 June 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (18)
Cylindrical Indentation Method for Predicting Tensile Properties of Additive Manufacturing Aluminum Alloys
With advantages like lightweight, high strength, and good thermal stability, aluminum alloy is widely used in the components of automobiles and aerospace. The tensile stress–strain relation is the key mechanical property in safety evaluation for these components. Herein, based on the energy equivalence theory, a cylindrical flat indentation (CFI) theoretical model is established which associates the indenter diameter, indentation load, depth, and elastic–plastic constitutive parameters. The CFI model is forwardly and reversely verified by finite element calculations within a large range of constitutive parameters. Additively manufactured aluminum alloy and conventional forged aluminum alloy samples are respectively prepared by selective laser melting and machining, and then tensile and indentation tests are carried out under the same conditions. The stress–strain relations and ultimate tensile strength of the aluminum alloys are reverse‐predicted based on microindentation tests and the CFI model, which agreed well with the results of the tensile tests. The effectiveness of the CFI method for the mechanical property tests of additive manufacturing and forged aluminum alloys is well verified by tensile experiments.
- 15 June 2025
- Published by Wiley in Advanced Engineering Materials
- Vol. 27 (18)
Cylindrical Indentation Method for Predicting Tensile Properties of Additive Manufacturing Aluminum Alloys
With advantages like lightweight, high strength, and good thermal stability, aluminum alloy is widely used in the components of automobiles and aerospace. The tensile stress–strain relation is the key mechanical property in safety evaluation for these components. Herein, based on the energy equivalence theory, a cylindrical flat indentation (CFI) theoretical model is established which associates the indenter diameter, indentation load, depth, and elastic–plastic constitutive parameters. The CFI model is forwardly and reversely verified by finite element calculations within a large range of constitutive parameters. Additively manufactured aluminum alloy and conventional forged aluminum alloy samples are respectively prepared by selective laser melting and machining, and then tensile and indentation tests are carried out under the same conditions. The stress–strain relations and ultimate tensile strength of the aluminum alloys are reverse‐predicted based on microindentation tests and the CFI model, which agreed well with the results of the tensile tests. The effectiveness of the CFI method for the mechanical property tests of additive manufacturing and forged aluminum alloys is well verified by tensile experiments.
- 17 April 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 28 (13) , 2538-2556
Corroded RC slabs retrofitted with FRP grid-reinforced ECC matrix composites
The ductile fracture characteristic of engineered cementitious composite (ECC) matrix can prevent debonding failure of external bonded fibre-reinforced polymer (FRP) reinforcement for strengthening reinforced concrete (RC) structures. This study investigated the flexural behaviour of corrosion-damaged RC slabs fabricated employing a combination of FRP grid and ECC. Fifteen one-way RC slabs were fabricated, consisting of three controls and 12 slabs retrofitted with a FRP grid-reinforced ECC matrix (FGREM). The experimental parameters included corrosion levels of 10% and 25% mass loss representing moderate and severe corrosion, respectively. Surface treatment techniques such as chiselling, grinding, and grooving were employed, along with the use of FRP anchors for the FGREM systems at intervals of 100 mm and 200 mm. In addition, a novel patch repair technique was introduced in this study combining it with an FGREM system with FRP anchors to strengthen the corroded RC slabs. The experimental results indicated that the corrosion-damaged RC slabs strengthened with FGREM systems exhibited an increased flexural capacity, ranging from 61.05% to 236.27% compared with the unstrengthened slabs. The utilization of an ECC matrix suppressed the flexural crack-induced intermediate debonding at the interface between the concrete substrate and the ECC. The specimens with FRP anchors exhibited the largest increase in flexural capacity compared with the unstrengthened specimens. Furthermore, the impact of the concrete surface treatment technology on the flexural performance was mild, even when employing grooving surface treatment techniques.
- 17 April 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 28 (13) , 2538-2556
Corroded RC slabs retrofitted with FRP grid-reinforced ECC matrix composites
The ductile fracture characteristic of engineered cementitious composite (ECC) matrix can prevent debonding failure of external bonded fibre-reinforced polymer (FRP) reinforcement for strengthening reinforced concrete (RC) structures. This study investigated the flexural behaviour of corrosion-damaged RC slabs fabricated employing a combination of FRP grid and ECC. Fifteen one-way RC slabs were fabricated, consisting of three controls and 12 slabs retrofitted with a FRP grid-reinforced ECC matrix (FGREM). The experimental parameters included corrosion levels of 10% and 25% mass loss representing moderate and severe corrosion, respectively. Surface treatment techniques such as chiselling, grinding, and grooving were employed, along with the use of FRP anchors for the FGREM systems at intervals of 100 mm and 200 mm. In addition, a novel patch repair technique was introduced in this study combining it with an FGREM system with FRP anchors to strengthen the corroded RC slabs. The experimental results indicated that the corrosion-damaged RC slabs strengthened with FGREM systems exhibited an increased flexural capacity, ranging from 61.05% to 236.27% compared with the unstrengthened slabs. The utilization of an ECC matrix suppressed the flexural crack-induced intermediate debonding at the interface between the concrete substrate and the ECC. The specimens with FRP anchors exhibited the largest increase in flexural capacity compared with the unstrengthened specimens. Furthermore, the impact of the concrete surface treatment technology on the flexural performance was mild, even when employing grooving surface treatment techniques.
- Open Access
Analytical Model for Concrete Cover Separation in Prestressed Near-Surface-Mounted Carbon Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams
This study presents a novel method for calculating the stress and bending moment in reinforced concrete (RC) beams strengthened with prestressed near-surface-mounted (NSM) carbon fiber-reinforced polymer (CFRP), focusing specifically on separation failure at the end concrete cover. By characterizing the geometry of the failure body and integrating it with the concrete tooth model, a comprehensive theoretical framework has been developed. This framework utilizes sectional strain distribution characteristics to establish the bending moment–curvature relationship and the load–deflection curve during loading. Comparisons with experimental data confirm the accuracy and applicability of this analytical model. The results demonstrate that the model is capable of accurately predicting the load–deflection behavior of the strengthened beam. Additionally, this study underscores the substantial impact of the CFRP prestress level on the concrete cover separation failure, showing that optimizing prestress settings can effectively enhance the ductility and bearing capacity of the strengthened beam.
Open AccessAnalytical Model for Concrete Cover Separation in Prestressed Near-Surface-Mounted Carbon Fiber-Reinforced Polymer-Strengthened Reinforced Concrete Beams
This study presents a novel method for calculating the stress and bending moment in reinforced concrete (RC) beams strengthened with prestressed near-surface-mounted (NSM) carbon fiber-reinforced polymer (CFRP), focusing specifically on separation failure at the end concrete cover. By characterizing the geometry of the failure body and integrating it with the concrete tooth model, a comprehensive theoretical framework has been developed. This framework utilizes sectional strain distribution characteristics to establish the bending moment–curvature relationship and the load–deflection curve during loading. Comparisons with experimental data confirm the accuracy and applicability of this analytical model. The results demonstrate that the model is capable of accurately predicting the load–deflection behavior of the strengthened beam. Additionally, this study underscores the substantial impact of the CFRP prestress level on the concrete cover separation failure, showing that optimizing prestress settings can effectively enhance the ductility and bearing capacity of the strengthened beam.
- Open Access
- 20 May 2024
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20
Influence of raw material properties on microscopic and mechanical characteristics of alkali-activated materials
- 20 May 2024
- Published by Elsevier in Case Studies in Construction Materials
- Vol. 20
Open AccessInfluence of raw material properties on microscopic and mechanical characteristics of alkali-activated materials
- 8 April 2024
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 27 (7) , 1234-1250
Flexural behavior of reinforced concrete beams strengthened with gradually prestressed near surface mounted carbon fiber-reinforced polymer strips under static and fatigue loading
The near surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strengthening technique, combined with gradually anchored prestressed technique, is utilized to delay the occurrence of concrete cover separation (CCS) and enhance the ductility of reinforced concrete beams. The load-carrying capacity of fully prestressed beams and gradually prestressed beams are investigated under both static and fatigue loading conditions. The study focused on the effect of gradient prestress on flexural behavior of strengthened beams, analyzed the failure mode, characteristic load, ductility, and stress distribution at CFRP-concrete interface under both prestress and load conditions. Results indicate that gradually prestressed beams outperform fully prestressed ones in restraining crack development, delaying yield of tensile reinforcement, improving bearing capacity and avoiding CCS failure. Bearing capacity was significantly increased by up to 35.48%, while ductility was greatly improved by 100.33% with ultimate deflection for gradually prestressed beams compared to fully prestressed ones. The fatigue life of gradually prestressed beams, which experienced a transition from CCS failure mode to fatigue fracture of tensile reinforcement, was significantly extended. Additionally, their ductility at failure was also greatly enhanced, thus confirming the effectiveness of gradually prestressed NSM CFRP strengthening technique.
- 8 April 2024
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 27 (7) , 1234-1250
Flexural behavior of reinforced concrete beams strengthened with gradually prestressed near surface mounted carbon fiber-reinforced polymer strips under static and fatigue loading
The near surface mounted (NSM) carbon fiber-reinforced polymer (CFRP) strengthening technique, combined with gradually anchored prestressed technique, is utilized to delay the occurrence of concrete cover separation (CCS) and enhance the ductility of reinforced concrete beams. The load-carrying capacity of fully prestressed beams and gradually prestressed beams are investigated under both static and fatigue loading conditions. The study focused on the effect of gradient prestress on flexural behavior of strengthened beams, analyzed the failure mode, characteristic load, ductility, and stress distribution at CFRP-concrete interface under both prestress and load conditions. Results indicate that gradually prestressed beams outperform fully prestressed ones in restraining crack development, delaying yield of tensile reinforcement, improving bearing capacity and avoiding CCS failure. Bearing capacity was significantly increased by up to 35.48%, while ductility was greatly improved by 100.33% with ultimate deflection for gradually prestressed beams compared to fully prestressed ones. The fatigue life of gradually prestressed beams, which experienced a transition from CCS failure mode to fatigue fracture of tensile reinforcement, was significantly extended. Additionally, their ductility at failure was also greatly enhanced, thus confirming the effectiveness of gradually prestressed NSM CFRP strengthening technique.
- 5 February 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (2) , 1-19
Flexural behavior of FRP bars reinforced seawater coral aggregate concrete beams incorporating alkali-activated materials
- 5 February 2024
- Published by Springer Nature in Materials and Structures
- Vol. 57 (2) , 1-19
Flexural behavior of FRP bars reinforced seawater coral aggregate concrete beams incorporating alkali-activated materials
- Open Access
Mechanical Properties and Reaction Kinetics of Alkali-Activated Metakaolin
In this study, the influence of the physicochemical properties and proportioning conditions of metakaolin on the mechanical properties of the synthesized metakaolin geopolymers was comprehensively evaluated, and the issue of the reaction control mechanism for the formation of mechanical properties during the synthesis of geopolymers was addressed. The reaction mechanism was analyzed by SEM and FTIR, and the kinetic analysis of the geopolymerization process was carried out using isothermal calorimetry combined with the Jander model. The test results show that the physicochemical properties of the metakaolin and the proportioning conditions together affect the mechanical properties of the geopolymer, with the correlation between the active aluminum content of the metakaolin and the strength of the geopolymer reaching over 0.87. The early stages of the geopolymerization reaction are all controlled by nucleation–growth mechanisms (N < 1), and the variability in control mechanisms is mainly found in the later stages of the geopolymerization reaction. The low reactivity and slow exothermic hydration of metakaolin are more inclined to the nucleation-growth mechanism responsible for the hydration process due to the large amount of encapsulation.
Open AccessMechanical Properties and Reaction Kinetics of Alkali-Activated Metakaolin
In this study, the influence of the physicochemical properties and proportioning conditions of metakaolin on the mechanical properties of the synthesized metakaolin geopolymers was comprehensively evaluated, and the issue of the reaction control mechanism for the formation of mechanical properties during the synthesis of geopolymers was addressed. The reaction mechanism was analyzed by SEM and FTIR, and the kinetic analysis of the geopolymerization process was carried out using isothermal calorimetry combined with the Jander model. The test results show that the physicochemical properties of the metakaolin and the proportioning conditions together affect the mechanical properties of the geopolymer, with the correlation between the active aluminum content of the metakaolin and the strength of the geopolymer reaching over 0.87. The early stages of the geopolymerization reaction are all controlled by nucleation–growth mechanisms (N < 1), and the variability in control mechanisms is mainly found in the later stages of the geopolymerization reaction. The low reactivity and slow exothermic hydration of metakaolin are more inclined to the nucleation-growth mechanism responsible for the hydration process due to the large amount of encapsulation.