Michele Forzatti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Michele Forzatti has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Henk J. Bolink
Universidad de Valencia C/Catedrático J. Beltrán 2
5 shared publications - Daniel Tordera
Instituto de Ciencia Molecular, Universidad de Valencia, c/Catedrático J. Beltrán 2, 46980 Paterna, Spain
4 shared publications Jorge Roy
Departamento de Química Inorgánica, Facultad de Ciencias, Instituto de Síntesis Química y Catálisis Homogénea (ISQCH), CSIC─Universidad de Zaragoza, Pedro Cerbuna 12, 50009 Zaragoza, Spain
3 shared publications- Violeta Sicilia
Departamento de Química Inorgánica, Escuela de Ingeniería y Arquitectura de Zaragoza, Instituto de Síntesis Química y Catálisis Homogénea (ISQCH), CSIC─Universidad de Zaragoza, Campus Río Ebro, Edificio Torres Quevedo, 50018 Zaragoza, Spain
3 shared publications - Antonio Martín
Instituto de Síntesis Química y Catálisis Homogénea (ISQCH) CSIC, Universidad de Zaragoza, C/Pedro Cerbuna 12, Zaragoza 50009, Spain
2 shared publications Edoardo Stanzani
Fluxim AG Winterthur Switzerland
2 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (19) , 10603-10615
Pure-Blue Emission at the Edge of the CIE Diagram: Carbazolyl NHC Platinum Butterfly Complexes with Near-Unity Quantum Yield and Their Application in Organic Light-Emitting Diodes
The Pt butterfly complexes, [{Pt(Cz-C∧C*im)(μ-Rpz)}2] (HC∧C* = 1-(4-(carbazolyl) phenyl)-3-methyl-1H-imidazol-2-ylidene; Rpz = pyrazolate (pz) 1; 4-fluoropyrazolate (4-Fpz) 2; 4-trifluoromethylpyrazolate (4-CF3pz) 3), with a carbazole-appended cyclometalated N-heterocyclic carbene (Cz-C∧C*im) in the wings, were prepared and characterized. DFT and TD-DFT calculations show the prevalent 1/3ILCT character of the lowest-energy absorptions and emissions of these phosphorescent complexes. In 5 wt % PMMA films, complexes 1–3 exhibit blue phosphorescence with photoluminescence quantum yield up to 0.99, even in air. The Commission Internationale de L’Eclairage (CIE) coordinates of their emission are in the blue corner, being “pure-blue” (CIEx+y < 0.3) in the case of 1. In view of these properties, these complexes were used to prepare OLEDs, with the best-performing devices achieving a maximum external quantum efficiency of 4.26% and maximum luminance of 2357.7 cd m–2 with cyan electroluminescence (CIEx,y = 0.14, 0.46).
- 1 May 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (19) , 10603-10615
Open AccessPure-Blue Emission at the Edge of the CIE Diagram: Carbazolyl NHC Platinum Butterfly Complexes with Near-Unity Quantum Yield and Their Application in Organic Light-Emitting Diodes
The Pt butterfly complexes, [{Pt(Cz-C∧C*im)(μ-Rpz)}2] (HC∧C* = 1-(4-(carbazolyl) phenyl)-3-methyl-1H-imidazol-2-ylidene; Rpz = pyrazolate (pz) 1; 4-fluoropyrazolate (4-Fpz) 2; 4-trifluoromethylpyrazolate (4-CF3pz) 3), with a carbazole-appended cyclometalated N-heterocyclic carbene (Cz-C∧C*im) in the wings, were prepared and characterized. DFT and TD-DFT calculations show the prevalent 1/3ILCT character of the lowest-energy absorptions and emissions of these phosphorescent complexes. In 5 wt % PMMA films, complexes 1–3 exhibit blue phosphorescence with photoluminescence quantum yield up to 0.99, even in air. The Commission Internationale de L’Eclairage (CIE) coordinates of their emission are in the blue corner, being “pure-blue” (CIEx+y < 0.3) in the case of 1. In view of these properties, these complexes were used to prepare OLEDs, with the best-performing devices achieving a maximum external quantum efficiency of 4.26% and maximum luminance of 2357.7 cd m–2 with cyan electroluminescence (CIEx,y = 0.14, 0.46).
- Top Cited Papers
- 15 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 391 (6782) , eady1370
A hierarchical shell locks and stabilizes perovskite nanocrystals with near-unity quantum yield
Solid-state emitters have exhibited external quantum yields (EQYs) below 65%, with no system combining unity photoluminescence quantum yield (PLQY) and commercially viable stability. These limitations are most pronounced in colloidal perovskite nanocrystals (PeNCs), given their soft ionic lattices and labile surfaces. We introduce a hierarchical shell (HS) structure comprising interbonded PbSO 4 -SiO 2 -polymer multilayers that simultaneously locks and stabilizes soft lattices and labile interfaces. HS-CsPbBr 3 PeNC films exhibit T 90 (10% PLQY loss) = 3211 hours under accelerated 60°C, 90% relative humidity (RH) and T 90 = 12,000 hours under blue-light exposure. HS strategy generalizes across PeNC compositions—including mixed-halide, mixed-cation, iodide, and hybrid PeNCs—and enables MAPbBr 3 with extended T 90 = 3900 hours (60°C, 90% RH) and T 90 = 27,234 hours (blue light). Moreover, HS-MAPbBr 3 films with 100.0% PLQY eliminate self-absorption losses and achieve an EQY of 91.4%, approaching the theoretical maximum. The HS barrier also prevents lead leakage for safety of large-area, high-resolution displays and bio-optoelectronics.
- 15 January 2026
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 391 (6782) , eady1370
Top Cited PapersA hierarchical shell locks and stabilizes perovskite nanocrystals with near-unity quantum yield
Solid-state emitters have exhibited external quantum yields (EQYs) below 65%, with no system combining unity photoluminescence quantum yield (PLQY) and commercially viable stability. These limitations are most pronounced in colloidal perovskite nanocrystals (PeNCs), given their soft ionic lattices and labile surfaces. We introduce a hierarchical shell (HS) structure comprising interbonded PbSO 4 -SiO 2 -polymer multilayers that simultaneously locks and stabilizes soft lattices and labile interfaces. HS-CsPbBr 3 PeNC films exhibit T 90 (10% PLQY loss) = 3211 hours under accelerated 60°C, 90% relative humidity (RH) and T 90 = 12,000 hours under blue-light exposure. HS strategy generalizes across PeNC compositions—including mixed-halide, mixed-cation, iodide, and hybrid PeNCs—and enables MAPbBr 3 with extended T 90 = 3900 hours (60°C, 90% RH) and T 90 = 27,234 hours (blue light). Moreover, HS-MAPbBr 3 films with 100.0% PLQY eliminate self-absorption losses and achieve an EQY of 91.4%, approaching the theoretical maximum. The HS barrier also prevents lead leakage for safety of large-area, high-resolution displays and bio-optoelectronics.
- Open Access
- 17 March 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (20)
Surfing the Color Map with Carbazole‐Appended Cyclometalated N‐Heterocyclic Carbene Pt Complexes and Their Application in Green Organic Light‐Emitting Devices
This paper describes the stage‐wise synthesis of the new carbazole‐appended platinum (II) cyclometalated N‐heterocyclic carbene complex, [Pt(Cbz‐C^C*bzim)Cl(NCCH3)] (A) (HC^C* = 1‐(4‐(9H‐carbazol‐9‐yl)phenyl)‐3‐methyl‐1H‐benzimidazol‐2‐ylidene) from 9‐(4‐bromo‐phenyl)‐9H‐carbazole, benzimidazole and [{Pt(μ‐Cl)(ƞ3‐2‐Me‐C3H4)}2]. Complex A, and the analogous imidazole derivative [Pt(Cbz‐C^C*im)Cl(NCCH3)] (B), are the precursors of the neutral complexes [Pt(Cbz‐C^C*bzim/im)(acac)] (1A/B, acac: acetylacetonate), [Pt(Cbz‐C^C*bzim/im)(P^O1)] (2A/B, P^O1: 2‐diphenylphosphinobenzoate) and [Pt(Cbz‐C^C*bzim/im)(P^O2)] (3A/B, P^O2: 2‐diphenylphosphinophenolate). At low doping concentration in poly(methylmethacrylate (PMMA) films (1% for 1A/B and 5% for 2A/B and 3A/B), they show a bright phosphorescent emission, peaking in the blue (1B‐3B) or blue–green (1A‐3A) spectral range. The planar structure of 1A and 1B enables intermolecular interactions, especially for 1A, with a more extended π–system, which changes the color from blue to yellowish–green at higher doping concentration. Organic Light‐Emitting Diodes (OLEDs) using 1A and 1B as emitters in thick doped and in ultrathin non‐doped emitting layers show aggregate‐derived emission even at very low concentrations. The best performing devices in this work use 1A and 3A and show a turn‐on voltage of 2.99 and 2.55 V, a peak luminance of 39208 and 25837 cd m−2, and a peak current efficiency of 44.9 and 40.0 cd A−1 (12.8% and 13.4% EQE).
- 17 March 2025
- Published by Wiley in Advanced Optical Materials
- Vol. 13 (20)
Open AccessSurfing the Color Map with Carbazole‐Appended Cyclometalated N‐Heterocyclic Carbene Pt Complexes and Their Application in Green Organic Light‐Emitting Devices
This paper describes the stage‐wise synthesis of the new carbazole‐appended platinum (II) cyclometalated N‐heterocyclic carbene complex, [Pt(Cbz‐C^C*bzim)Cl(NCCH3)] (A) (HC^C* = 1‐(4‐(9H‐carbazol‐9‐yl)phenyl)‐3‐methyl‐1H‐benzimidazol‐2‐ylidene) from 9‐(4‐bromo‐phenyl)‐9H‐carbazole, benzimidazole and [{Pt(μ‐Cl)(ƞ3‐2‐Me‐C3H4)}2]. Complex A, and the analogous imidazole derivative [Pt(Cbz‐C^C*im)Cl(NCCH3)] (B), are the precursors of the neutral complexes [Pt(Cbz‐C^C*bzim/im)(acac)] (1A/B, acac: acetylacetonate), [Pt(Cbz‐C^C*bzim/im)(P^O1)] (2A/B, P^O1: 2‐diphenylphosphinobenzoate) and [Pt(Cbz‐C^C*bzim/im)(P^O2)] (3A/B, P^O2: 2‐diphenylphosphinophenolate). At low doping concentration in poly(methylmethacrylate (PMMA) films (1% for 1A/B and 5% for 2A/B and 3A/B), they show a bright phosphorescent emission, peaking in the blue (1B‐3B) or blue–green (1A‐3A) spectral range. The planar structure of 1A and 1B enables intermolecular interactions, especially for 1A, with a more extended π–system, which changes the color from blue to yellowish–green at higher doping concentration. Organic Light‐Emitting Diodes (OLEDs) using 1A and 1B as emitters in thick doped and in ultrathin non‐doped emitting layers show aggregate‐derived emission even at very low concentrations. The best performing devices in this work use 1A and 3A and show a turn‐on voltage of 2.99 and 2.55 V, a peak luminance of 39208 and 25837 cd m−2, and a peak current efficiency of 44.9 and 40.0 cd A−1 (12.8% and 13.4% EQE).
- Open Access
- 22 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (44) , 61305-61313
Strong Grain Boundary Passivation Effect of Coevaporated Dopants Enhances the Photoemission of Lead Halide Perovskites
Herein, we demonstrate that coevaporated dopants provide a means to passivate buried interfacial defects occurring at perovskite grain boundaries in evaporated perovskite thin films, thus giving rise to an enhanced photoluminescence. By means of an extensive photophysical characterization, we provide experimental evidence that indicate that the codopant acts mainly at the grain boundaries. They passivate interfacial traps and prevent the formation of photoinduced deep traps. On the other hand, the presence of an excessive amount of organic dopant can lead to a barrier for carrier diffusion. Hence, the passivation process demands a proper balance between the two effects. Our analysis on the role of the dopant, performed under different excitation regimes, permits evaluation of the performance of the material under conditions more adapted to photovoltaic or light emitting applications. In this context, the approach taken herein provides a screening method to evaluate the suitability of a passivating strategy prior to its incorporation into a device.
- 22 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (44) , 61305-61313
Open AccessStrong Grain Boundary Passivation Effect of Coevaporated Dopants Enhances the Photoemission of Lead Halide Perovskites
Herein, we demonstrate that coevaporated dopants provide a means to passivate buried interfacial defects occurring at perovskite grain boundaries in evaporated perovskite thin films, thus giving rise to an enhanced photoluminescence. By means of an extensive photophysical characterization, we provide experimental evidence that indicate that the codopant acts mainly at the grain boundaries. They passivate interfacial traps and prevent the formation of photoinduced deep traps. On the other hand, the presence of an excessive amount of organic dopant can lead to a barrier for carrier diffusion. Hence, the passivation process demands a proper balance between the two effects. Our analysis on the role of the dopant, performed under different excitation regimes, permits evaluation of the performance of the material under conditions more adapted to photovoltaic or light emitting applications. In this context, the approach taken herein provides a screening method to evaluate the suitability of a passivating strategy prior to its incorporation into a device.
- 23 September 2024
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 11 (10) , 4151-4160
Organic Light-Emitting Diodes Comprising an Undoped Thermally Activated Delayed Fluorescence Emissive Layer and a Thick Inorganic Perovskite Hole Transport Layer
- 23 September 2024
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 11 (10) , 4151-4160
Organic Light-Emitting Diodes Comprising an Undoped Thermally Activated Delayed Fluorescence Emissive Layer and a Thick Inorganic Perovskite Hole Transport Layer
- Open Access
- 11 July 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (27)
Organic Light‐Emitting Diodes Combining Thick Inorganic Perovskite Hole Transport Layers and Ultrathin Emitting Layers
Organic light‐emitting diodes have a huge gain in popularity over the past 25 years for display and lighting applications, but the production of low‐cost efficient devices remains a challenge. OLEDs using sub‐nanometer undoped emissive layers are a route to fabricate cost‐effective devices but, as they are inherently thin, it opens to issues with variation in thickness and shunting paths. At the same time, lead chloride perovskites are currently being investigated as charge transport materials in light‐emitting devices owing to their wide bandgap, and remarkable high carrier mobility. In this work, for the first time, OLEDs that combine vacuum‐processed thick cesium lead chloride perovskite hole transport layers with ultrathin Ir complex‐based emissive layers are reported. Defects on the perovskite film are suppressed and the thickness of the emitting layer is optimized. Semitransparent devices are also fabricated with an average visible transmittance of over 50%. The results show extraordinarily thick devices (>1 µm) with low turn‐on voltage (3.3 V), high luminance (>15 000 cd m−2) and efficiencies (up to 54.1 cd A−1), and a negligible efficiency roll‐off in the display applications luminance region.
- 11 July 2024
- Published by Wiley in Advanced Optical Materials
- Vol. 12 (27)
Open AccessOrganic Light‐Emitting Diodes Combining Thick Inorganic Perovskite Hole Transport Layers and Ultrathin Emitting Layers
Organic light‐emitting diodes have a huge gain in popularity over the past 25 years for display and lighting applications, but the production of low‐cost efficient devices remains a challenge. OLEDs using sub‐nanometer undoped emissive layers are a route to fabricate cost‐effective devices but, as they are inherently thin, it opens to issues with variation in thickness and shunting paths. At the same time, lead chloride perovskites are currently being investigated as charge transport materials in light‐emitting devices owing to their wide bandgap, and remarkable high carrier mobility. In this work, for the first time, OLEDs that combine vacuum‐processed thick cesium lead chloride perovskite hole transport layers with ultrathin Ir complex‐based emissive layers are reported. Defects on the perovskite film are suppressed and the thickness of the emitting layer is optimized. Semitransparent devices are also fabricated with an average visible transmittance of over 50%. The results show extraordinarily thick devices (>1 µm) with low turn‐on voltage (3.3 V), high luminance (>15 000 cd m−2) and efficiencies (up to 54.1 cd A−1), and a negligible efficiency roll‐off in the display applications luminance region.
- Open Access
- 8 April 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (16) , 7275-7285
Pyrazolate-Bridged NHC Cyclometalated [Pt2] Complexes and [Pt2Ag(PPh3)]+ Clusters in Electroluminescent Devices
The ionic transition metal complexes (iTMCs) [{Pt(C∧C*)(μ-Rpz)}2Ag(PPh3)]X (HC∧C* = 1-(4-(ethoxycarbonyl)phenyl)-3-methyl-1H-imidazole-2-ylidene, X = ClO4/PF6; Rpz = pz 1 a /2a, 4-Mepz 1 b /2b, and 3,5-dppz 1 c /2c) were prepared from the neutral [{Pt(C∧C*)(μ-Rpz)}2] (Rpz = pz A, 4-Mepz B, and 3,5-dppz C) and fully characterized. The “Ag(PPh3)” fragment is in between the two square-planar platinum units in an “open book” disposition and bonded through two Pt–Ag donor–acceptor bonds, as shown by X-ray diffraction (dPt–Ag ∼ 2.78 Å, 1a–1c). 195Pt{1H} and 31P{1H} NMR confirmed that these solid-state structures remain in solution. Photoluminescence studies and theoretical calculations on 1a, were performed. The diphenylpyrazolate derivatives show the highest photoluminescence quantum yield (PLQY) in the solid state. Therefore, 2c and its neutral precursor C were selected as active materials on light-emitting devices. OLEDs fabricated with C showed a turn-on voltage of 3.2 V, a luminance peak of 21,357 cd m–2 at 13 V, and a peak current efficiency of 28.8 cd A–1 (9.5% EQE). They showed a lifetime t50 of 15.7 h. OLEDs using 2c showed a maximum luminance of 114 cd m–2, while LECs exhibited a maximum luminance of 20 cd m–2 and a current efficiency of around 0.2 cd A–1, with a t50 value of 50 min.
- 8 April 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (16) , 7275-7285
Open AccessPyrazolate-Bridged NHC Cyclometalated [Pt2] Complexes and [Pt2Ag(PPh3)]+ Clusters in Electroluminescent Devices
The ionic transition metal complexes (iTMCs) [{Pt(C∧C*)(μ-Rpz)}2Ag(PPh3)]X (HC∧C* = 1-(4-(ethoxycarbonyl)phenyl)-3-methyl-1H-imidazole-2-ylidene, X = ClO4/PF6; Rpz = pz 1 a /2a, 4-Mepz 1 b /2b, and 3,5-dppz 1 c /2c) were prepared from the neutral [{Pt(C∧C*)(μ-Rpz)}2] (Rpz = pz A, 4-Mepz B, and 3,5-dppz C) and fully characterized. The “Ag(PPh3)” fragment is in between the two square-planar platinum units in an “open book” disposition and bonded through two Pt–Ag donor–acceptor bonds, as shown by X-ray diffraction (dPt–Ag ∼ 2.78 Å, 1a–1c). 195Pt{1H} and 31P{1H} NMR confirmed that these solid-state structures remain in solution. Photoluminescence studies and theoretical calculations on 1a, were performed. The diphenylpyrazolate derivatives show the highest photoluminescence quantum yield (PLQY) in the solid state. Therefore, 2c and its neutral precursor C were selected as active materials on light-emitting devices. OLEDs fabricated with C showed a turn-on voltage of 3.2 V, a luminance peak of 21,357 cd m–2 at 13 V, and a peak current efficiency of 28.8 cd A–1 (9.5% EQE). They showed a lifetime t50 of 15.7 h. OLEDs using 2c showed a maximum luminance of 114 cd m–2, while LECs exhibited a maximum luminance of 20 cd m–2 and a current efficiency of around 0.2 cd A–1, with a t50 value of 50 min.