SSShalu Saini

Shalu Saini

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shalu Saini has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Asynchronous real-time learning in Spiking Neural Network using 3-terminal Resistance Random Access Memory

    by Harshvardhan Singh, Nirmal Solanki, Jaskirat Singh Maskeen, Shalu Saini, Madhav Pathak, Sandip Lashkare

  • Solution processed Ti3C2 MXene nanosheets as resistive switching layers in flexible RRAM devices for sustainable electronics

    by Shalu Saini, Shree Prakash Tiwari

    Due to their exceptional chemical stability and tunable chemical properties particularly the interlayer bonding, MXenes have emerged as promising switching layers in RRAM devices. This work presents the synthesis of nanosheets of a widely explored MXene (Ti3C2), and its application for demonstrating high performance flexible RRAM devices through solution processing, which is rarely demonstrated till date. The structural and morphological properties of Ti3C2 nanosheets were comprehensively investigated using various characterization techniques. RRAM devices were fabricated on ITO coated PET substrate with both Ag and Al as top electrodes (TE). The Ag/Ti3C2/ITO RRAM devices showed excellent retention time of 10^4 seconds with ION/IOFF of ~10^3 and low average VSET & VRESET voltages of ~0.8 V &- 0.7 V suitable for low voltage operation. On the other hand Al/Ti3C2/ITO RRAM devices exhibited similar excellent retention time of 104 seconds and reliable switching characteristics with higher ION/IOFF of ~10^4, yet a high VSET of 3.5 V and low VRESET of -0.85 V. These devices were further investigated for stability of electrical performance upon bending at various radii of 12 mm, 7 mm, and 5 mm, indicating consistent switching. Among the two, the Al/Ti3C2/ITO device exhibited superior mechanical flexibility, maintaining a higher ION/IOFF (~10⁴–10⁵) and stable retention of both LRS and HRS under bending radii down to 5 mm, whereas the Ag/Ti3C2/ITO device showed a noticeable decline in HRS stability and ION/IOFF (from ~10^3 to ~10^1), indicating the Al-based device is more feasible for flexible memory applications. These findings confirm that solution-processed Ti3C2 can be a promising switching layer for flexible and sustainable electronics.


  • Open Access

    Investigation of solution-processed tungsten disulfide as switching layer in flexible resistive memory devices for performance and stability

    by Shalu Saini, Shree Prakash Tiwari

    Solution-processed tungsten disulfide (WS2) is demonstrated as a promising resistive switching layer for flexible resistive random access memory (RRAM) devices. For this study, WS2 nanoparticle solution was prepared by liquid exfoliation process from WS2 powder and comprehensive material investigation was performed to understand the suitability for device fabrication through morphologies and electronic behavior. Devices were fabricated on indium tin oxide (ITO) coated flexible polyethylene terephthalate (PET) with ITO acting as bottom electrode (BE) and silver (Ag) deposited as top electrode (TE) with thin film of WS2 prepared by spin coating as an active layer between electrodes. These fabricated flexible RRAM devices exhibited resistive switching characteristics with low operating voltages (V SET ∼0.5 V and V RESET ∼−1.4 V) over 100 consecutive cycles, along with impressive retention time of ∼104 s and high I ON/I OFF of ∼104. The performance variation of these devices was also investigated upon bending at radii of 12 mm and 5 mm indicating consistent switching, however a decay in LRS was observed after 250 s upon investigation of retention. These findings suggest that solution-processed thin films of WS2 nanomaterial can act as a promising switching layer for flexible electronics.


  • Comprehensive Investigation of Shelf Life and Performance of Flexible Hybrid RRAM Devices With PVK:MoS2/TiO2 Bilayer

    by Shalu Saini, Anil Lodhi, Anurag Dwivedi, Arpit Khandelwal, Shree Prakash Tiwari

    A comprehensive investigation of long-term environmental stability and performance of flexible hybrid resistive random access memory (RRAM) devices with PVK:MoS2/TiO2 bilayer is presented. These devices were systematically characterized for their switching behavior for a very long duration of 20 months, and it was found that devices were able to maintain their switching behavior with maximum average ${V}_{\text {SET}}$ of ~1.5 V and lowest average ${V}_{\text {RESET}}$ of ~ −1.8 V, indicating high shelf life and low-voltage operation. Excellent retention of 104s was exhibited by devices even after being in ambient environment for 20 months. Although the devices exhibited almost unchanged ${V}_{\text {SET}}$ and ${V}_{\text {RESET}}$ values upon variation of humidity exposure (RH ~42% to ~99%), an increase in the magnitude of both was observed upon temperature variation from room temperature (RT) to 100 °C. A typical decay in ${I}_{\text {ON}}/{I}_{\text {OFF}}$ by more than an order of magnitude (from ~103) was observed upon aging and application of temperature; however, an increase in the same was observed upon exposure to high humidity on the order of 102–103. Our investigation indicates that (PVK:MoS2/TiO2) hybrid switching layer can be suitable for environmentally stable nonvolatile memory devices for flexible electronics.