Martín Taboada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Martín Taboada has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Jorge Wilfredo Vera Alvarado
School of Metallurgical Engineering, National University of Trujillo, Trujillo, Peru
4 shared publications - Luis Caballero
School of Metallurgical Engineering, National University of Trujillo, Trujillo, Peru
4 shared publications - Braulio Briseño
School of Metallurgical Engineering, Universidad Nacional de Trujillo, Trujillo 13001, Peru
1 shared publication - Eduardo Azabache
School of Mechanical Engineering, Universidad Nacional de Trujillo, Trujillo 13001, Peru
1 shared publication - Jhonny Valverde Flores
Universidad Nacional Agraria La Molina, Lima, Peru
1 shared publication - Luis Wilfredo Aguilar Rodriguez
School of Metallurgical Engineering, Universidad Nacional de Trujillo, Trujillo 13001, Peru
1 shared publication
Latest Publications
- Open Access
- 1 February 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (2) , 579-591
Functional Verification of a Stainless Steel Reference Block for Calibration of Industrial Ultrasonic Test System
In the construction and assembly of metal structures, ultrasonic testing constitutes a pillar for the guarantee of structural integrity. This study aimed to develop and experimentally validate a semi-cylindrical reference block, optimized for the ultrasonic inspection of welds in austenitic stainless steels under the AWS D1.6 code. Unlike conventional devices, this proposal integrates three functional zones into a unified body. Methodologically, the acoustic properties of velocity and attenuation coefficient were characterized using the pulse-echo technique with 2.25 and 5.0 MHz transducers, validating the results through analysis of variance (ANOVA) and Pearson correlation. The findings revealed a statistically significant influence of frequency on the acoustic properties of the material. Functionally, experimental tests demonstrated that the geometric arrangement of three integrated references allows for the efficient construction of Distance-Amplitude Correction (DAC) curves and direct angular verification, overcoming the logistical limitations of conventional prismatic blocks. The main novelty of the device lies in its capacity to unify the functions of sensitivity, resolution, and distance calibration into a single body of acoustically equivalent material, eliminating the need for complex correction factors and ensuring greater precision in industrial inspection.
- 1 February 2026
- Published by Ital Publication in Civil Engineering Journal
- Vol. 12 (2) , 579-591
Open AccessFunctional Verification of a Stainless Steel Reference Block for Calibration of Industrial Ultrasonic Test System
In the construction and assembly of metal structures, ultrasonic testing constitutes a pillar for the guarantee of structural integrity. This study aimed to develop and experimentally validate a semi-cylindrical reference block, optimized for the ultrasonic inspection of welds in austenitic stainless steels under the AWS D1.6 code. Unlike conventional devices, this proposal integrates three functional zones into a unified body. Methodologically, the acoustic properties of velocity and attenuation coefficient were characterized using the pulse-echo technique with 2.25 and 5.0 MHz transducers, validating the results through analysis of variance (ANOVA) and Pearson correlation. The findings revealed a statistically significant influence of frequency on the acoustic properties of the material. Functionally, experimental tests demonstrated that the geometric arrangement of three integrated references allows for the efficient construction of Distance-Amplitude Correction (DAC) curves and direct angular verification, overcoming the logistical limitations of conventional prismatic blocks. The main novelty of the device lies in its capacity to unify the functions of sensitivity, resolution, and distance calibration into a single body of acoustically equivalent material, eliminating the need for complex correction factors and ensuring greater precision in industrial inspection.
- 1 January 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 61 (1) , 32-43
Acoustic Measurements as a Nonconventional Alternative for Metallurgical Characterization of a Low-Carbon Mechanical Construction Steel
Steels are susceptible to changes in their properties due to thermal effects; characterizing these changes in real time is one of the most pressing needs in the industry. The industrial ultrasound method is presented as a nondestructive technological alternative for mechanical characterization through direct correlation with acoustic properties. Therefore, the objective of the research was to correlate acoustic properties with hardness measurements in a mechanical construction steel induced to small microstructural changes by heat treatments. For this purpose, nine experimental tests were planned through the factorial interaction of the heating temperature in the austenitic region of 870, 920 and 970°C, and the cooling medium, inside the furnace, still air and oil. Each sample was characterized by Vickers hardness tests, optical metallography and ultrasound using the pulse-echo technique with longitudinal waves. The results and statistical tests showed significant changes in hardness and acoustic attenuation coefficient due to the effect of the microstructural change produced in the samples according to the imposed thermal cycle. The experimental data, arranged in a contour plot, show that hardness exhibits a negative correlation with respect to the velocity and attenuation coefficient; both acoustic parameters show a tendency to decrease and hardness to increase as the martensitic structures in the steel increase. The correlation obtained is presented as an alternative to non-destructive testing aimed at mechanical characterization using ultrasonic acoustic measurements.
- 1 January 2025
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 61 (1) , 32-43
Acoustic Measurements as a Nonconventional Alternative for Metallurgical Characterization of a Low-Carbon Mechanical Construction Steel
Steels are susceptible to changes in their properties due to thermal effects; characterizing these changes in real time is one of the most pressing needs in the industry. The industrial ultrasound method is presented as a nondestructive technological alternative for mechanical characterization through direct correlation with acoustic properties. Therefore, the objective of the research was to correlate acoustic properties with hardness measurements in a mechanical construction steel induced to small microstructural changes by heat treatments. For this purpose, nine experimental tests were planned through the factorial interaction of the heating temperature in the austenitic region of 870, 920 and 970°C, and the cooling medium, inside the furnace, still air and oil. Each sample was characterized by Vickers hardness tests, optical metallography and ultrasound using the pulse-echo technique with longitudinal waves. The results and statistical tests showed significant changes in hardness and acoustic attenuation coefficient due to the effect of the microstructural change produced in the samples according to the imposed thermal cycle. The experimental data, arranged in a contour plot, show that hardness exhibits a negative correlation with respect to the velocity and attenuation coefficient; both acoustic parameters show a tendency to decrease and hardness to increase as the martensitic structures in the steel increase. The correlation obtained is presented as an alternative to non-destructive testing aimed at mechanical characterization using ultrasonic acoustic measurements.
- 21 June 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69 (2) , 607-612
Probability of Defects Detection in Welded Joints using the Magnetic Particle Method
The probability of defects detection (POD) is developed as an efficient tool to evaluate the detection capacity of non-destructive testing methods. An experimental study has been carried out applying the magnetic particle test method with an electromagnetic yoke on welded steel joints, which contained surface defects previously characterized in shape, size and location. The test conditions were varied, such as the type of magnetization current, and the type of magnetic particle. The probability of detecting defects in welded joints evaluated by the Hit/miss method increased with the size of the defect, independent of its shape factor. Smaller defects were likely to be detected with dry magnetic particles compared to wet fluorescent ones, a50 (2,118 mm ˂ 2,469 mm), a90 (6,395 mm ˂ 6,77 mm) and a90/95 (12,12 mm ˂ 12,19 mm).
- 21 June 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Metallurgy and Materials
- Vol. 69 (2) , 607-612
Probability of Defects Detection in Welded Joints using the Magnetic Particle Method
The probability of defects detection (POD) is developed as an efficient tool to evaluate the detection capacity of non-destructive testing methods. An experimental study has been carried out applying the magnetic particle test method with an electromagnetic yoke on welded steel joints, which contained surface defects previously characterized in shape, size and location. The test conditions were varied, such as the type of magnetization current, and the type of magnetic particle. The probability of detecting defects in welded joints evaluated by the Hit/miss method increased with the size of the defect, independent of its shape factor. Smaller defects were likely to be detected with dry magnetic particles compared to wet fluorescent ones, a50 (2,118 mm ˂ 2,469 mm), a90 (6,395 mm ˂ 6,77 mm) and a90/95 (12,12 mm ˂ 12,19 mm).
- 1 January 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 60 (1) , 85-95
Reliability of Dye Penetrant Inspection Method to Detect Weld Discontinuities
The dye penetrant inspection method used to reveal surface weld discontinuities is an important factor for quality verification in the manufacture of structural components; however, it is probable that certain size-dependent discontinuities may or may not be detected. Then, how reliable can it be? In this sense, the objective of the research has been to estimate the reliability of dye penetrant inspection to detect discontinuities in relation to their size. Six experimental tests were performed by three inspectors, with visible and fluorescent dye penetrants, on twenty welded joints of similar surface characteristics, containing 63 typical weld discontinuities arranged according to shape and size, whereas POD reliability quantitative estimates were developed by the hit-or-miss statistical method. For the test system, the fluorescent penetrants, due to their greater sensitivity compared to the visible ones, registered greater reliability in revealing smaller discontinuities. The POD estimators were a50 (1.469 mm < 1.978 mm), a90 (6.348 mm < 7.474 mm), a90/95 (14.58 mm < 15.77 mm). Fluorescent dyes allowed a higher rate and probability of detection; both factors showed a tendency to increase as the discontinuities size increased.
- 1 January 2024
- Published by Pleiades Publishing Ltd in Russian Journal of Nondestructive Testing
- Vol. 60 (1) , 85-95
Reliability of Dye Penetrant Inspection Method to Detect Weld Discontinuities
The dye penetrant inspection method used to reveal surface weld discontinuities is an important factor for quality verification in the manufacture of structural components; however, it is probable that certain size-dependent discontinuities may or may not be detected. Then, how reliable can it be? In this sense, the objective of the research has been to estimate the reliability of dye penetrant inspection to detect discontinuities in relation to their size. Six experimental tests were performed by three inspectors, with visible and fluorescent dye penetrants, on twenty welded joints of similar surface characteristics, containing 63 typical weld discontinuities arranged according to shape and size, whereas POD reliability quantitative estimates were developed by the hit-or-miss statistical method. For the test system, the fluorescent penetrants, due to their greater sensitivity compared to the visible ones, registered greater reliability in revealing smaller discontinuities. The POD estimators were a50 (1.469 mm < 1.978 mm), a90 (6.348 mm < 7.474 mm), a90/95 (14.58 mm < 15.77 mm). Fluorescent dyes allowed a higher rate and probability of detection; both factors showed a tendency to increase as the discontinuities size increased.