John Leland Ball
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
John Leland Ball has a total of 254 co-authors. Here are the top co-authors by number of shared publications:
- Roy Alexander Tinguely
Massachusetts Institute of Technology 1 , Cambridge, Massachusetts 02139
13 shared publications - Shon Mackie
Massachusetts Institute of Technology 1 , Cambridge, Massachusetts 02139
12 shared publications - Prasoon Raj
Commonwealth Fusion Systems 4 , Devens, Massachusetts 01434
9 shared publications - Davide Rigamonti
Institute for Plasma Science and Technology, National Research Council 2 , Milan 20125
7 shared publications - Johan A. Frenje
Massachusetts Institute of Technology , Cambridge, Massachusetts 02139
7 shared publications - John E. Rice
Massachusetts Institute of Technology 1 , Cambridge, Massachusetts 02139
7 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Design and characterization of the magnetic proton recoil neutron spectrometer for burning plasma studies on SPARC (invited)
The SPARC tokamak is expected to robustly enter the burning plasma regime (Q > 5) during deuterium–tritium operations and will provide a unique platform to study novel effects of alpha heating in reactor-relevant plasma scenarios. This article presents the near-final design and characterization of the high-resolution magnetic proton recoil (MPR) neutron spectrometer for SPARC and discusses the opportunities for burning plasma studies enabled by this instrument. The MPR spectrometer will be positioned in the midplane line of sight of the poloidal neutron camera and view SPARC’s core plasma. The as-built instrumental response function is calculated based on measured magnetic fields, which have been optimized to maximize resolution and sensitivity constrained by limited space and power. The spectrometer has variable resolution and sensitivity, with settings ranging from high efficiency (2.22 × 10−6 counts per incident neutron) and low resolution (1070 keV) to low efficiency (1.48 × 10−7 counts per incident neutron) and high resolution (149 keV). We also present kinetic simulations of burning plasma effects, which we use to calculate synthetic neutron spectra to better understand the diagnostic capabilities of the instrument. Based on these simulations, the spectrometer is expected to diagnose core ion temperature with less than 7% uncertainty and time resolution less than 100 ms in break-even campaign experiments. Non-thermal alpha knock-on fusion is found to be a small contribution to overall fusion power; however, it does produce a measurable feature in the neutron spectrum that can be used to evaluate alpha heating and confinement in high-gain scenarios.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Open AccessDesign and characterization of the magnetic proton recoil neutron spectrometer for burning plasma studies on SPARC (invited)
The SPARC tokamak is expected to robustly enter the burning plasma regime (Q > 5) during deuterium–tritium operations and will provide a unique platform to study novel effects of alpha heating in reactor-relevant plasma scenarios. This article presents the near-final design and characterization of the high-resolution magnetic proton recoil (MPR) neutron spectrometer for SPARC and discusses the opportunities for burning plasma studies enabled by this instrument. The MPR spectrometer will be positioned in the midplane line of sight of the poloidal neutron camera and view SPARC’s core plasma. The as-built instrumental response function is calculated based on measured magnetic fields, which have been optimized to maximize resolution and sensitivity constrained by limited space and power. The spectrometer has variable resolution and sensitivity, with settings ranging from high efficiency (2.22 × 10−6 counts per incident neutron) and low resolution (1070 keV) to low efficiency (1.48 × 10−7 counts per incident neutron) and high resolution (149 keV). We also present kinetic simulations of burning plasma effects, which we use to calculate synthetic neutron spectra to better understand the diagnostic capabilities of the instrument. Based on these simulations, the spectrometer is expected to diagnose core ion temperature with less than 7% uncertainty and time resolution less than 100 ms in break-even campaign experiments. Non-thermal alpha knock-on fusion is found to be a small contribution to overall fusion power; however, it does produce a measurable feature in the neutron spectrum that can be used to evaluate alpha heating and confinement in high-gain scenarios.
- Open Access
- 1 October 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (10)
Measurements for fusion power to demonstrate Q fus > 1 on SPARC (invited)
The SPARC tokamak’s primary goal in the first operational campaign is achieving net fusion energy gain (Qfus> 1), targeting a fusion power (Pfus) of 8–30 MW in deuterium–tritium (DT) plasma. For an optimally accurate and widely accepted demonstration of breakeven, the SPARC team is preparing for three independent methodologies to measure Pfus. The first method relies on neutron flux monitors and a neutron activation system, which together offer high time-resolution data using ionization chambers and dosimetry foils for absolute yield measurements. These are calibrated via an in situ DT neutron generator and detailed neutronics models. The second method employs collimated neutron diagnostics. A core-viewing magnetic-proton recoil spectrometer analyzes the neutron energy spectrum, while a poloidal profiler uses scintillator and diamond detectors to derive the DT neutron emissivity profile. Together, these diagnostics allow for a precise reconstruction of Pfus from core emissions. The third method calculates Pfus by volume-integrating the fusion reactivity using data from an array of kinetic profile diagnostics. Key inputs include temperature profiles from x-ray spectroscopy and electron–cyclotron emission measurements, plasma/electron density from Thomson-scattering, interferometry and edge-reflectometry, and fuel ion and impurity levels (Zeff) from optical and vacuum-UV spectroscopy. Neutral gas diagnostics and optical spectroscopy provide the critical fuel ion concentrations, which are also needed for corrections for the non-DT neutron contributions. By integrating these complementary techniques, SPARC ensures a robust and verified demonstration of Qfus > 1 in its first campaign.
- 1 October 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (10)
Open AccessMeasurements for fusion power to demonstrate Q fus > 1 on SPARC (invited)
The SPARC tokamak’s primary goal in the first operational campaign is achieving net fusion energy gain (Qfus> 1), targeting a fusion power (Pfus) of 8–30 MW in deuterium–tritium (DT) plasma. For an optimally accurate and widely accepted demonstration of breakeven, the SPARC team is preparing for three independent methodologies to measure Pfus. The first method relies on neutron flux monitors and a neutron activation system, which together offer high time-resolution data using ionization chambers and dosimetry foils for absolute yield measurements. These are calibrated via an in situ DT neutron generator and detailed neutronics models. The second method employs collimated neutron diagnostics. A core-viewing magnetic-proton recoil spectrometer analyzes the neutron energy spectrum, while a poloidal profiler uses scintillator and diamond detectors to derive the DT neutron emissivity profile. Together, these diagnostics allow for a precise reconstruction of Pfus from core emissions. The third method calculates Pfus by volume-integrating the fusion reactivity using data from an array of kinetic profile diagnostics. Key inputs include temperature profiles from x-ray spectroscopy and electron–cyclotron emission measurements, plasma/electron density from Thomson-scattering, interferometry and edge-reflectometry, and fuel ion and impurity levels (Zeff) from optical and vacuum-UV spectroscopy. Neutral gas diagnostics and optical spectroscopy provide the critical fuel ion concentrations, which are also needed for corrections for the non-DT neutron contributions. By integrating these complementary techniques, SPARC ensures a robust and verified demonstration of Qfus > 1 in its first campaign.
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5523-5528
Interpretive Modeling of Plasma Evolution During Fueling Experiments at CMFX
- 1 October 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (10) , 5523-5528
Interpretive Modeling of Plasma Evolution During Fueling Experiments at CMFX
- 14 August 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 232
Characterization of a prototype parallel-plate 238U fission chamber with DD and DT fusion neutron sources
- 14 August 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 232
Characterization of a prototype parallel-plate 238U fission chamber with DD and DT fusion neutron sources
- Open Access
- 4 November 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016010
Measurements of fusion yield on the Centrifugal Mirror Fusion Experiment
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal E × B flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total neutron yield is measured with two xylene (EJ-301) and deuterated-xylene (EJ-301D) liquid scintillator detectors absolutely calibrated with an in silico method. A larger xylene scintillator was cross-calibrated and used to measure the time dynamics of the fusion rate under various experimental conditions. A permanently installed 3 He gas tube detector was independently calibrated with a Cf-252 neutron source to make total yield measurements and provide an independent validation of the scintillator calibration. An interpretive modeling framework was developed using the 0D code MCTrans++ (Schwartz et al 2024 J. Plasma Phys. 90 905900217) to infer undiagnosed plasma parameters such as density, temperature, and confinement time. A peak neutron emission rate of 8.4 × 10 6 ± 7.0 × 10 5 was measured (neglecting modeling uncertainties), with an inferred triple product of 1.9 × 10 17 m − 3 keV s from 0D modeling.
- 4 November 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (1) , 016010
Open AccessMeasurements of fusion yield on the Centrifugal Mirror Fusion Experiment
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal E × B flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total neutron yield is measured with two xylene (EJ-301) and deuterated-xylene (EJ-301D) liquid scintillator detectors absolutely calibrated with an in silico method. A larger xylene scintillator was cross-calibrated and used to measure the time dynamics of the fusion rate under various experimental conditions. A permanently installed 3 He gas tube detector was independently calibrated with a Cf-252 neutron source to make total yield measurements and provide an independent validation of the scintillator calibration. An interpretive modeling framework was developed using the 0D code MCTrans++ (Schwartz et al 2024 J. Plasma Phys. 90 905900217) to infer undiagnosed plasma parameters such as density, temperature, and confinement time. A peak neutron emission rate of 8.4 × 10 6 ± 7.0 × 10 5 was measured (neglecting modeling uncertainties), with an inferred triple product of 1.9 × 10 17 m − 3 keV s from 0D modeling.
- Open Access
Measurements of Fusion Yield on the Centrifugal Mirror Fusion Experiment
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal $E\times B$ flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total neutron yield is measured with two xylene (EJ-301) and deuterated-xylene (EJ-301D) liquid scintillator detectors absolutely calibrated with an in silico method. A larger xylene scintillator was cross-calibrated and used to measure the time dynamics of the fusion rate under various experimental conditions. A permanently installed $^3$He gas tube detector was independently calibrated with a Cf-252 neutron source to make total yield measurements and provide an independent validation of the scintillator calibration. An interpretive modeling framework was developed using the 0D code MCTrans++ (Schwartz et al 2024 JPP) to infer undiagnosed plasma parameters such as density, temperature, and confinement time. A peak neutron emission rate of 8.4$\times 10^{6}$ $\pm$ 7.0$\times 10^{5}$ was measured (neglecting modeling uncertainties), with an inferred triple product of 1.9~$\times~10^{17}$ $\mathrm{m^{-3}}$ keV s from 0D modeling.Open AccessMeasurements of Fusion Yield on the Centrifugal Mirror Fusion Experiment
The Centrifugal Mirror Fusion Experiment (CMFX) at the University of Maryland, College Park is a rotating mirror device that utilizes a central cathode to generate a radial electric field which induces a strongly sheared azimuthal $E\times B$ flow to improve plasma confinement and stability. The fusion yield of CMFX plasmas is assessed by diagnosis of neutron emission for the first time. The total neutron yield is measured with two xylene (EJ-301) and deuterated-xylene (EJ-301D) liquid scintillator detectors absolutely calibrated with an in silico method. A larger xylene scintillator was cross-calibrated and used to measure the time dynamics of the fusion rate under various experimental conditions. A permanently installed $^3$He gas tube detector was independently calibrated with a Cf-252 neutron source to make total yield measurements and provide an independent validation of the scintillator calibration. An interpretive modeling framework was developed using the 0D code MCTrans++ (Schwartz et al 2024 JPP) to infer undiagnosed plasma parameters such as density, temperature, and confinement time. A peak neutron emission rate of 8.4$\times 10^{6}$ $\pm$ 7.0$\times 10^{5}$ was measured (neglecting modeling uncertainties), with an inferred triple product of 1.9~$\times~10^{17}$ $\mathrm{m^{-3}}$ keV s from 0D modeling. - Open Access
- 28 February 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (3) , 036038
Assessing the risk of proliferation via fissile breeding in ARC-class fusion power plants
Construction of a nuclear weapon requires access to kilogram-scale quantities of fissile material, which can be bred from fertile material like U-238 and Th-232 via neutron capture. Future fusion power plants, with total neutron source rates in excess of 1020 n s−1, could breed weapons-relevant quantities of fissile material on short timescales, posing a breakout proliferation risk. The ARC-class fusion reactor design is characterized by demountable high temperature superconducting magnets, a FLiBe liquid immersion blanket, and a relatively small size (∼4 m major radius, ∼1 m minor radius). We use the open-source Monte Carlo neutronics code OpenMC to perform self-consistent time-dependent simulations of a representative ARC-class blanket to assess the feasibility of a fissile breeding breakout scenario. We find that a significant quantity of fissile material can be bred in less than six months of full power operation for initial fertile inventories ranging from 5 to 50 metric tons, representing a non-negligible proliferation risk. We further study the feasibility of this scenario by examining other consequences of fissile breeding such as reduced tritium breeding ratio, extra heat from fission and decay heat, isotopic purity of bred material, and self-protection time of irradiated blanket material. We also examine the impact of Li-6 enrichment on fissile breeding and find that it substantially reduces breeding rate, motivating its use as a proliferation resistance tool.
- 28 February 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (3) , 036038
Open AccessAssessing the risk of proliferation via fissile breeding in ARC-class fusion power plants
Construction of a nuclear weapon requires access to kilogram-scale quantities of fissile material, which can be bred from fertile material like U-238 and Th-232 via neutron capture. Future fusion power plants, with total neutron source rates in excess of 1020 n s−1, could breed weapons-relevant quantities of fissile material on short timescales, posing a breakout proliferation risk. The ARC-class fusion reactor design is characterized by demountable high temperature superconducting magnets, a FLiBe liquid immersion blanket, and a relatively small size (∼4 m major radius, ∼1 m minor radius). We use the open-source Monte Carlo neutronics code OpenMC to perform self-consistent time-dependent simulations of a representative ARC-class blanket to assess the feasibility of a fissile breeding breakout scenario. We find that a significant quantity of fissile material can be bred in less than six months of full power operation for initial fertile inventories ranging from 5 to 50 metric tons, representing a non-negligible proliferation risk. We further study the feasibility of this scenario by examining other consequences of fissile breeding such as reduced tritium breeding ratio, extra heat from fission and decay heat, isotopic purity of bred material, and self-protection time of irradiated blanket material. We also examine the impact of Li-6 enrichment on fissile breeding and find that it substantially reduces breeding rate, motivating its use as a proliferation resistance tool.
- Open Access
- 10 January 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (2) , 026037
Advancing tritium self-sufficiency in fusion power plants: insights from the BABY experiment
In the pursuit of fusion power, achieving tritium self-sufficiency stands as a pivotal challenge. Tritium breeding within molten salts is a critical aspect of next-generation fusion reactors, yet experimental measurements of Tritium Breeding Ratio (TBR) have remained elusive. Here we present the results of the Build A Better Yield blanket experiment, which represents a pioneering effort in tritium research by utilizing high-energy (14 MeV) neutron irradiation of molten salts, a departure from conventional low-energy neutron approaches. Using a small-scale (100 ml) molten salt tritium breeding setup, we not only simulated, but also directly measured a TBR ( 3.57 × 10 − 4 ). This innovative approach provides crucial experimental validation, offering insights unattainable through simulation alone. Moreover, our findings reveal a surprising outcome: tritium was predominantly collected as HT, contrary to the expected TF. This underscores the complexity of tritium behavior in molten salts, highlighting the need for further investigation. This work lays the foundation for a more sophisticated experimental setup, including increasing the volume of the breeder, enhancing neutron detection, and refining tritium collection systems. Such improvements are crucial for advancing our understanding of fusion reactor feasibility and paving the way for future experiments.
- 10 January 2025
- Published by IOP Publishing in Nuclear Fusion
- Vol. 65 (2) , 026037
Open AccessAdvancing tritium self-sufficiency in fusion power plants: insights from the BABY experiment
In the pursuit of fusion power, achieving tritium self-sufficiency stands as a pivotal challenge. Tritium breeding within molten salts is a critical aspect of next-generation fusion reactors, yet experimental measurements of Tritium Breeding Ratio (TBR) have remained elusive. Here we present the results of the Build A Better Yield blanket experiment, which represents a pioneering effort in tritium research by utilizing high-energy (14 MeV) neutron irradiation of molten salts, a departure from conventional low-energy neutron approaches. Using a small-scale (100 ml) molten salt tritium breeding setup, we not only simulated, but also directly measured a TBR ( 3.57 × 10 − 4 ). This innovative approach provides crucial experimental validation, offering insights unattainable through simulation alone. Moreover, our findings reveal a surprising outcome: tritium was predominantly collected as HT, contrary to the expected TF. This underscores the complexity of tritium behavior in molten salts, highlighting the need for further investigation. This work lays the foundation for a more sophisticated experimental setup, including increasing the volume of the breeder, enhancing neutron detection, and refining tritium collection systems. Such improvements are crucial for advancing our understanding of fusion reactor feasibility and paving the way for future experiments.
- Open Access
- 1 December 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (12)
Evaluating deuterated-xylene for use as a fusion neutron spectrometer
The spectrum of neutrons emitted by thermonuclear plasmas encodes information about the fuel ion distribution function. Measuring these fast neutron spectra with sufficient resolution allows for the measurement of plasma properties such as the ion temperature and strength and energy of fast ion populations. Liquid organic scintillators are a commonly used fast neutron detection technology because of their high detection efficiency and ability to discriminate between neutrons and gammas. However, performing detailed spectroscopy with these detectors is difficult because of the isotropic nature of neutron scattering on protons, the dominant mechanism of interaction. Deuterium-based scintillators have shown promise as a superior spectrometer technology because of the anisotropic nature of neutron scattering on deuterium, which significantly improves the condition number of the detector response matrix [Lawrence et al., Nucl. Instrum. Methods Phys. Res., Sect. A 729, 924 (2013)]. Deuterated-xylene, now available commercially, has advantages in light output and safety over benzene-based deuterated scintillators [Becchetti et al., Nucl. Instrum. Methods Phys. Res., Sect. A 820, 112 (2016)]. We present experimental spectrum unfoldings made by 2 in. right cylindrical protiated-xylene and deuterated-xylene detectors with response matrices generated with Geant4 and additional data from the literature. We compare their performance by measuring the neutron spectrum produced by an AmBe source and deuterium–tritium (DT) neutron generators. We find that the deuterated scintillator outperforms the protiated one for AmBe and DT spectra, suggesting deuterated-xylene should be considered for future fusion neutron spectrometry applications.
- 1 December 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (12)
Open AccessEvaluating deuterated-xylene for use as a fusion neutron spectrometer
The spectrum of neutrons emitted by thermonuclear plasmas encodes information about the fuel ion distribution function. Measuring these fast neutron spectra with sufficient resolution allows for the measurement of plasma properties such as the ion temperature and strength and energy of fast ion populations. Liquid organic scintillators are a commonly used fast neutron detection technology because of their high detection efficiency and ability to discriminate between neutrons and gammas. However, performing detailed spectroscopy with these detectors is difficult because of the isotropic nature of neutron scattering on protons, the dominant mechanism of interaction. Deuterium-based scintillators have shown promise as a superior spectrometer technology because of the anisotropic nature of neutron scattering on deuterium, which significantly improves the condition number of the detector response matrix [Lawrence et al., Nucl. Instrum. Methods Phys. Res., Sect. A 729, 924 (2013)]. Deuterated-xylene, now available commercially, has advantages in light output and safety over benzene-based deuterated scintillators [Becchetti et al., Nucl. Instrum. Methods Phys. Res., Sect. A 820, 112 (2016)]. We present experimental spectrum unfoldings made by 2 in. right cylindrical protiated-xylene and deuterated-xylene detectors with response matrices generated with Geant4 and additional data from the literature. We compare their performance by measuring the neutron spectrum produced by an AmBe source and deuterium–tritium (DT) neutron generators. We find that the deuterated scintillator outperforms the protiated one for AmBe and DT spectra, suggesting deuterated-xylene should be considered for future fusion neutron spectrometry applications.
- Open Access
- 1 November 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (11)
Publisher’s Note: “Ion optical design of the magnetic proton recoil neutron spectrometer for the SPARC tokamak” [Rev. Sci. Instrum. 95, 103502 (2024)]
This article was originally published online on 1 October 2024 with incorrect information in Ref. 13. The reference appears correctly below. AIP Publishing apol This article was originally published online on 1 October 2024 with incorrect information in Ref. 13. The reference appears correctly below. AIP Publishing apol
- 1 November 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (11)
Open AccessPublisher’s Note: “Ion optical design of the magnetic proton recoil neutron spectrometer for the SPARC tokamak” [Rev. Sci. Instrum. 95, 103502 (2024)]
This article was originally published online on 1 October 2024 with incorrect information in Ref. 13. The reference appears correctly below. AIP Publishing apol This article was originally published online on 1 October 2024 with incorrect information in Ref. 13. The reference appears correctly below. AIP Publishing apol