Zeenat Khadim Hussain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zeenat Khadim Hussain has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
Bocai Liu
Wuhan University
2 shared publicationsChaopeng Li
Wuhan University
2 shared publications- Congshi Jiang
School of Remote Sensing and Information Engineering, Wuhan University, Wuhan 430079, China
2 shared publications Huamin Wang
School of Remote Sensing and Information Engineering Wuhan University Wuhan China
2 shared publications- Xicheng Tan
Wuhan University
2 shared publications Zhiyuan Mei
Wuhan University
2 shared publications
Latest Publications
- Open Access
- 23 December 2025
- Published by MDPI AG in Remote Sensing
- Vol. 18 (1) , 33
Multi-Sensor Hybrid Modeling of Urban Solar Irradiance via Perez–Ineichen and Deep Neural Networks
An accurate estimate of sun irradiance is important for solar energy management in urban areas with complicated atmospheric conditions. The urban solar irradiance (USI) can be predictively researched with a variety of models; however, basing this entirely on one model often leads to other important conditions being omitted. A hybrid framework is suggested in this study, integrating the Perez–Ineichen PI model with a Deep Neural Network (DNN) model for predicting USI in Wuhan, China. The PI model predicts clear-sky irradiance labels based on atmospheric parameters normalized against the National Solar Radiation Database for greater accuracy. The model is trained on the Clear Sky Index with real-time atmospheric parameters gained from ground station measurements and satellite images. Following correlation analysis using bands from Sentinel-2 to find suitable bands for the model, the algorithm was prepared for atmospheric parameters, including cloud cover, aerosol concentration, and surface reflectance, all of which impact solar radiation. The architecture incorporates attention methods for important atmospheric parameters and skip connections for greater training stability. Results from the Deep Neural Network-Selected bands (DNN-S) and Deep Neural Network-All bands (DNN-A) models gave different performances, with the DNN-S model yielding better accuracy with a RMSE of 69.49 W/m2 clear-sky, 87.60 W/m2 cloudy-sky, and 72.57 W/m2 all-sky. The results were validated using hyperspectral imagery, along with cloud mask, solar area, and surface albedo-derived products, confirming that the USI estimates are supported by the high precision and consistency of Sentinel-2-derived irradiance estimates.
- 23 December 2025
- Published by MDPI AG in Remote Sensing
- Vol. 18 (1) , 33
Open AccessMulti-Sensor Hybrid Modeling of Urban Solar Irradiance via Perez–Ineichen and Deep Neural Networks
An accurate estimate of sun irradiance is important for solar energy management in urban areas with complicated atmospheric conditions. The urban solar irradiance (USI) can be predictively researched with a variety of models; however, basing this entirely on one model often leads to other important conditions being omitted. A hybrid framework is suggested in this study, integrating the Perez–Ineichen PI model with a Deep Neural Network (DNN) model for predicting USI in Wuhan, China. The PI model predicts clear-sky irradiance labels based on atmospheric parameters normalized against the National Solar Radiation Database for greater accuracy. The model is trained on the Clear Sky Index with real-time atmospheric parameters gained from ground station measurements and satellite images. Following correlation analysis using bands from Sentinel-2 to find suitable bands for the model, the algorithm was prepared for atmospheric parameters, including cloud cover, aerosol concentration, and surface reflectance, all of which impact solar radiation. The architecture incorporates attention methods for important atmospheric parameters and skip connections for greater training stability. Results from the Deep Neural Network-Selected bands (DNN-S) and Deep Neural Network-All bands (DNN-A) models gave different performances, with the DNN-S model yielding better accuracy with a RMSE of 69.49 W/m2 clear-sky, 87.60 W/m2 cloudy-sky, and 72.57 W/m2 all-sky. The results were validated using hyperspectral imagery, along with cloud mask, solar area, and surface albedo-derived products, confirming that the USI estimates are supported by the high precision and consistency of Sentinel-2-derived irradiance estimates.
- Open Access
- 7 March 2025
- Published by Taylor & Francis in International Journal of Digital Earth
- Vol. 18 (1)
Spatiotemporal optimization for communication-navigation-sensing collaborated emergency monitoring
- 7 March 2025
- Published by Taylor & Francis in International Journal of Digital Earth
- Vol. 18 (1)
Open AccessSpatiotemporal optimization for communication-navigation-sensing collaborated emergency monitoring
- Top Cited Papers
- 30 October 2024
- Published by Elsevier in Rangeland Ecology & Management
- Vol. 98, 377-388
Exploring Rangeland Dynamics in Punjab, Pakistan: Integrating LULC, LST, and Remote Sensing for Ecosystem Analysis (2000–2020)
- 30 October 2024
- Published by Elsevier in Rangeland Ecology & Management
- Vol. 98, 377-388
Top Cited PapersExploring Rangeland Dynamics in Punjab, Pakistan: Integrating LULC, LST, and Remote Sensing for Ecosystem Analysis (2000–2020)
- 7 June 2024
- Published by Wiley in Transactions in GIS
- Vol. 28 (5) , 1439-1461
LCEVES: A locally constrained evolutionary algorithm for vehicle evacuation scheduling under urban waterlogging risk
The global rising level of climate change has caused significant disruptions in city traffic patterns due to intense heavy rains causing urban waterlogging disasters worldwide. These disasters have also resulted in massive economic losses and casualties. In consideration of these issues, the current challenge for urban disaster emergency response is to determine strategies to arrange for emergency vehicle scheduling as soon as urban waterlogging expands in a way that minimizes casualties and financial losses. This article proposes the Locally Constraint Evolutionary algorithm for Vehicle Evacuation Scheduling (LCEVES), which includes the following features to address the vehicle emergency evacuation problems in urban waterlogging zones specifically for regulated vehicles (e.g., buses, vehicles transporting hazardous materials, etc.). Firstly, a general technical route for vehicle emergency evacuation under urban waterlogging risk, secondly an optional routes search mechanism for vehicle evacuation in the waterlogging area and thirdly a locally constraint evolutionary algorithm for vehicle evacuation in the waterlogging area. The experiments show that LCEVES improves vehicle evacuation efficiency and reduces the risk of affected vehicles, providing an effective means for vehicle evacuation in the waterlogging zone. This research provides an effective method for solving vehicle evacuation scheduling challenges during urban waterlogging and also has significance for vehicle scheduling in other types of disasters.
- 7 June 2024
- Published by Wiley in Transactions in GIS
- Vol. 28 (5) , 1439-1461
LCEVES: A locally constrained evolutionary algorithm for vehicle evacuation scheduling under urban waterlogging risk
The global rising level of climate change has caused significant disruptions in city traffic patterns due to intense heavy rains causing urban waterlogging disasters worldwide. These disasters have also resulted in massive economic losses and casualties. In consideration of these issues, the current challenge for urban disaster emergency response is to determine strategies to arrange for emergency vehicle scheduling as soon as urban waterlogging expands in a way that minimizes casualties and financial losses. This article proposes the Locally Constraint Evolutionary algorithm for Vehicle Evacuation Scheduling (LCEVES), which includes the following features to address the vehicle emergency evacuation problems in urban waterlogging zones specifically for regulated vehicles (e.g., buses, vehicles transporting hazardous materials, etc.). Firstly, a general technical route for vehicle emergency evacuation under urban waterlogging risk, secondly an optional routes search mechanism for vehicle evacuation in the waterlogging area and thirdly a locally constraint evolutionary algorithm for vehicle evacuation in the waterlogging area. The experiments show that LCEVES improves vehicle evacuation efficiency and reduces the risk of affected vehicles, providing an effective means for vehicle evacuation in the waterlogging zone. This research provides an effective method for solving vehicle evacuation scheduling challenges during urban waterlogging and also has significance for vehicle scheduling in other types of disasters.
- Open Access
- 10 April 2024
- Published by MDPI AG in Preprints.org
A Comparative Study of PP-LiteSeg, Dual Attention Network, DeeplabV3p and Asymmetric Neural Network for Rooftop Detection in UAV Images
Remote sensing technology is crucial for accurate rooftop detection, benefiting urban planning, disaster management, and solar resource estimation. This study employs Efficient Interactive Segmentation (EISEG) to enhance the efficiency of remote sensing image labeling, with a particular focus on rooftop detection. It is necessary to use modern technology because traditional manual labelling methods are labor-intensive and complicated. The study introduces a novel framework on deep learning semantic segmentation models, facilitating an efficient approach to rooftop identification using high-resolution UAV remote sensing datasets. Large dataset of labeled UAV rooftop building images, in which each superpixel region is assigned a binary label indicating rooftop presence. Advanced methods including Asymmetric Neural Network (ANN), Dual At-tention Network (DANet), PP-LiteSeg, and Deeplab3 are implemented for automatic rooftop detection due to their higher performance and advanced architectures. These models are executed on the Baidu deep learning platform PaddlePaddle, generating initial rooftop segmentation maps crucial for estimating photovoltaic resources. The ANN model emerges with the highest accuracy at 96%, followed by DANet at 95.09%, PP-LiteSeg at 94.54%, and Deeplab3 at 81.61%. The outcomes presenting efficient models for automated rooftop identification, and demonstrating the continuous need for improving deep learning techniques in smart and sustainable cities.
- 10 April 2024
- Published by MDPI AG in Preprints.org
Open AccessA Comparative Study of PP-LiteSeg, Dual Attention Network, DeeplabV3p and Asymmetric Neural Network for Rooftop Detection in UAV Images
Remote sensing technology is crucial for accurate rooftop detection, benefiting urban planning, disaster management, and solar resource estimation. This study employs Efficient Interactive Segmentation (EISEG) to enhance the efficiency of remote sensing image labeling, with a particular focus on rooftop detection. It is necessary to use modern technology because traditional manual labelling methods are labor-intensive and complicated. The study introduces a novel framework on deep learning semantic segmentation models, facilitating an efficient approach to rooftop identification using high-resolution UAV remote sensing datasets. Large dataset of labeled UAV rooftop building images, in which each superpixel region is assigned a binary label indicating rooftop presence. Advanced methods including Asymmetric Neural Network (ANN), Dual At-tention Network (DANet), PP-LiteSeg, and Deeplab3 are implemented for automatic rooftop detection due to their higher performance and advanced architectures. These models are executed on the Baidu deep learning platform PaddlePaddle, generating initial rooftop segmentation maps crucial for estimating photovoltaic resources. The ANN model emerges with the highest accuracy at 96%, followed by DANet at 95.09%, PP-LiteSeg at 94.54%, and Deeplab3 at 81.61%. The outcomes presenting efficient models for automated rooftop identification, and demonstrating the continuous need for improving deep learning techniques in smart and sustainable cities.
- Open Access
- 19 February 2024
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 128
The study of DDPG based spatiotemporal dynamic deployment optimization of Air-Ground ad hoc network for disaster emergency response
- 19 February 2024
- Published by Elsevier in International Journal of Applied Earth Observation and Geoinformation
- Vol. 128
Open AccessThe study of DDPG based spatiotemporal dynamic deployment optimization of Air-Ground ad hoc network for disaster emergency response
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 70-76
A Fast Rooftop Extraction Deep Learning Method based on PP-LiteSeg for UAV Imaginary
Rapid and accurate extraction of rooftops from unmanned aerial vehicle images plays a vital role in many applications, such as automatic photovoltaic resources, urban planning, disaster Risk management, and infrastructure monitoring. A new fast rooftop extraction method based on PP-LiteSeg for UAV images was proposed. Primarily, the input UAV image is preprocessed to enhance the contrast and normalized the images into two classification one is roof top extraction and second background of the image. Then, a deep learning super pixel segmentation algorithm called PP-LiteSeg is employed to generate super pixel regions, which group pixels with similar characteristics and facilitate subsequent processing steps. Next, PaddlePaddle-based classification model EISeg(Efficient Interactive Segmentation) is trained using a large dataset of labeled UAV roof top buildings images which include building and rooftop of building, where each super pixel region is assigned, a binary label indicating whether it belongs to a rooftop or not. Finally, experimental evaluations on a wide-ranging dataset of UAV images prove the effectiveness and efficiency of the proposed method. The results show that the proposed method achieves high accuracy in rooftop extraction, while significantly reducing computational time compared to existing methods. In conclusion, the proposed fast rooftop extraction method based on PP-LiteSeg for UAV images offers a valuable solution for rapid and reliable rooftop of building identification in Shaoguan area. Its combination of super pixel segmentation and PaddleSeg-based image segmentation provides accurate results while minimizing computational complexity. The method's usefulness, effectiveness, and robustness make it a promising implement for applications needful rooftop extraction from UAV imagery.
- 17 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 70-76
A Fast Rooftop Extraction Deep Learning Method based on PP-LiteSeg for UAV Imaginary
Rapid and accurate extraction of rooftops from unmanned aerial vehicle images plays a vital role in many applications, such as automatic photovoltaic resources, urban planning, disaster Risk management, and infrastructure monitoring. A new fast rooftop extraction method based on PP-LiteSeg for UAV images was proposed. Primarily, the input UAV image is preprocessed to enhance the contrast and normalized the images into two classification one is roof top extraction and second background of the image. Then, a deep learning super pixel segmentation algorithm called PP-LiteSeg is employed to generate super pixel regions, which group pixels with similar characteristics and facilitate subsequent processing steps. Next, PaddlePaddle-based classification model EISeg(Efficient Interactive Segmentation) is trained using a large dataset of labeled UAV roof top buildings images which include building and rooftop of building, where each super pixel region is assigned, a binary label indicating whether it belongs to a rooftop or not. Finally, experimental evaluations on a wide-ranging dataset of UAV images prove the effectiveness and efficiency of the proposed method. The results show that the proposed method achieves high accuracy in rooftop extraction, while significantly reducing computational time compared to existing methods. In conclusion, the proposed fast rooftop extraction method based on PP-LiteSeg for UAV images offers a valuable solution for rapid and reliable rooftop of building identification in Shaoguan area. Its combination of super pixel segmentation and PaddleSeg-based image segmentation provides accurate results while minimizing computational complexity. The method's usefulness, effectiveness, and robustness make it a promising implement for applications needful rooftop extraction from UAV imagery.