Xiaoli Zhang
Xiaoli Zhang has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Jinyou Duan
College of Chemistry & Pharmacy, Northwest A&F University, Yangling 712100, Shaanxi, China
2 shared publications - Qin Tu
College of Chemistry and Pharmacy, Northwest A&F University, Yangling, Shaanxi 712100, PR China
2 shared publications Fang Liu
Department of Clinical Laboratory, Chongqing Red Cross Hospital, People’s Hospital of Jiangbei District, Chongqing 400020, China
1 shared publication- Haibo Mu
Shaanxi Key Laboratory of Natural Products & Chemical Biology, College of Chemistry & Pharmacy, Northwest A&F University, Yangling, 712100 Shaanxi, China
1 shared publication - Huiling Qing
Henan Eye Hospital, Henan Provincial People’s Hospital, People’s Hospital of Zhengzhou University, Zhengzhou 450003, P. R. China
1 shared publication - Jianguo He
Department of Neurosurgery, Chongqing Red Cross Hospital, People’s Hospital of Jiangbei District, Chongqing 400020, China
1 shared publication
Latest Publications
- 8 August 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (33) , 13718
Correction of “Preparation of a Multifunctional Wound Dressing Based on a Natural Deep Eutectic Solvent”
- 8 August 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (33) , 13718
Correction of “Preparation of a Multifunctional Wound Dressing Based on a Natural Deep Eutectic Solvent”
- 5 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (15) , 18400-18410
pH-Responsive Co-Assembled Peptide Hydrogel to Inhibit Drug-Resistant Bacterial Infection and Promote Wound Healing
Drug-resistant bacterial infection and biofilm formation are the key inhibitors of wound healing, and new strategies are urgently needed to address these issues. In this study, we designed a pH-responsive co-assembled peptide hydrogel to inhibit Methicillin-resistant Staphylococcus aureus (MRSA) infection and promote wound healing. We synthesized a cationic short peptide (Nap-FFKKK) and a co-assembled hydrogel with curcumin at pH ∼ 7.8. The loaded curcumin was continuously released in a weak acid environment (pH ∼ 5.5). The lysine-rich cationic peptide inhibited biofilm formation in MRSA via electrostatic interaction with the negatively charged bacterial cell surface and, thus, provided a reinforcing antibacterial effect with curcumin. In vitro antibacterial experiments showed that the co-assembled system considerably reduced the minimum inhibitory concentration of curcumin against MRSA by 10-fold and promoted wound healing in a mouse model of MRSA-infected wounds. This study provides a simple and promising strategy to treat drug-resistant bacterial infections in wounds.
- 5 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (15) , 18400-18410
pH-Responsive Co-Assembled Peptide Hydrogel to Inhibit Drug-Resistant Bacterial Infection and Promote Wound Healing
Drug-resistant bacterial infection and biofilm formation are the key inhibitors of wound healing, and new strategies are urgently needed to address these issues. In this study, we designed a pH-responsive co-assembled peptide hydrogel to inhibit Methicillin-resistant Staphylococcus aureus (MRSA) infection and promote wound healing. We synthesized a cationic short peptide (Nap-FFKKK) and a co-assembled hydrogel with curcumin at pH ∼ 7.8. The loaded curcumin was continuously released in a weak acid environment (pH ∼ 5.5). The lysine-rich cationic peptide inhibited biofilm formation in MRSA via electrostatic interaction with the negatively charged bacterial cell surface and, thus, provided a reinforcing antibacterial effect with curcumin. In vitro antibacterial experiments showed that the co-assembled system considerably reduced the minimum inhibitory concentration of curcumin against MRSA by 10-fold and promoted wound healing in a mouse model of MRSA-infected wounds. This study provides a simple and promising strategy to treat drug-resistant bacterial infections in wounds.
- RetractedOpen Access
- 10 August 2022
- Published by Wiley in Computational and Mathematical Methods in Medicine
- Vol. 2022, 1-10
The In Vitro Antimicrobial and Antibiofilm Activities of Lysozyme against Gram-Positive Bacteria
Objective. To analyze the in vitro antibacterial and antibiofilm activities of lysozyme (LYS) and its combination with various drugs against Gram-positive bacteria (GPB, ), thus to provide an exploration direction for drug development. Methods. The minimum inhibitory concentrations (MICs) of linezolid (LZD), amikacin (AMK), ceftriaxone/sulbactam (CRO/SBT), cefotaxime/sulbactam (CTX/SBT), piperacillin/sulbactam (PIP/SBT), doxycycline (DOX), levofloxacin (LVX), amoxicillin/clavulanate potassium (7 : 1, AK71), imipenem (IPM), azithromycin (AZM), and their combinations with LYS were determined with tuber twice dilution. The antimicrobial and antibiofilm activities of LYS, AZM, LVX, and their combinations with others were evaluated through MTT and crystal violet assay. Results. High-dose LYS (30 μg/mL) combined with PIP/SBT and AK71, respectively, showed synergistic antibacterial activities against methicillin-resistant Staphylococcus aureus (MRSA), while it showed no synergistic activities when combined with other drugs. LYS and AZM inhibited the biofilm formation of one MRSA strain, but they and LVX had no similar activities against methicillin-resistant Staphylococcus epidermidis (MRSE) or vancomycin-resistant Enterococcus faecium (VREF). Particularly, LYS increased the permeability of biofilms of MRSA 33 and exhibited antibiofilm activities against MRSA 31 ( ) and MRSE 61 ( ). The combinations of PIP/SBT+LYS, AMK+LYS, and LZD+LYS showed stronger antibiofilm activities against MRSA 62, MRSE 62, MRSE 63, and VREF 11. Conclusion. The antimicrobial and antibiofilm activities of LYS against MRSA were better than AZM, while that of LYS against MRSE and VREF, respectively, was similar with AZM and LVX.
- 10 August 2022
- Published by Wiley in Computational and Mathematical Methods in Medicine
- Vol. 2022, 1-10
RetractedOpen AccessThe In Vitro Antimicrobial and Antibiofilm Activities of Lysozyme against Gram-Positive Bacteria
Objective. To analyze the in vitro antibacterial and antibiofilm activities of lysozyme (LYS) and its combination with various drugs against Gram-positive bacteria (GPB, ), thus to provide an exploration direction for drug development. Methods. The minimum inhibitory concentrations (MICs) of linezolid (LZD), amikacin (AMK), ceftriaxone/sulbactam (CRO/SBT), cefotaxime/sulbactam (CTX/SBT), piperacillin/sulbactam (PIP/SBT), doxycycline (DOX), levofloxacin (LVX), amoxicillin/clavulanate potassium (7 : 1, AK71), imipenem (IPM), azithromycin (AZM), and their combinations with LYS were determined with tuber twice dilution. The antimicrobial and antibiofilm activities of LYS, AZM, LVX, and their combinations with others were evaluated through MTT and crystal violet assay. Results. High-dose LYS (30 μg/mL) combined with PIP/SBT and AK71, respectively, showed synergistic antibacterial activities against methicillin-resistant Staphylococcus aureus (MRSA), while it showed no synergistic activities when combined with other drugs. LYS and AZM inhibited the biofilm formation of one MRSA strain, but they and LVX had no similar activities against methicillin-resistant Staphylococcus epidermidis (MRSE) or vancomycin-resistant Enterococcus faecium (VREF). Particularly, LYS increased the permeability of biofilms of MRSA 33 and exhibited antibiofilm activities against MRSA 31 ( ) and MRSE 61 ( ). The combinations of PIP/SBT+LYS, AMK+LYS, and LZD+LYS showed stronger antibiofilm activities against MRSA 62, MRSE 62, MRSE 63, and VREF 11. Conclusion. The antimicrobial and antibiofilm activities of LYS against MRSA were better than AZM, while that of LYS against MRSE and VREF, respectively, was similar with AZM and LVX.
- Open Access
- 4 January 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (2) , 1012-1021
Fabrication of green poly(vinyl alcohol) nanofibers using natural deep eutectic solvent for fast-dissolving drug delivery
Fast-dissolving drug delivery systems are essential to drug delivery owing to the enhanced drug solubility, controlled drug concentration, target and rapid drug delivery. In this study, we developed fast-dissolving drug delivery systems using honey and acetylsalicylic acid-embedded poly(vinyl alcohol) (PVA) nanofibers based on natural deep eutectic solvent (DES). The efficacy of our fast-dissolving drug delivery system was tested by incorporating honey and acetylsalicylic acid in the PVA nanofibers. Firstly, the morphology and structure of the functional PVA–DES nanofibers (PVA–DES–honey and PVA–DES–ASA) were observed and analyzed, which proved the successful preparation of functional PVA–DES nanofibers. NIH/3T3 and HepG2 cells incubated on the nanofiber had more than 90% of cell viability, suggesting our materials were biocompatible and non-toxic. The nanofiber materials dissolved rapidly in artificial saliva solutions, suggesting potential use of our materials for fast dissolving drug delivery in oral cavities. The honey incorporated PVA nanofiber (PVA–DES–honey) showed a total bacterial reduction of 37.0% and 37.9% against E. coli and S. aureus, respectively, after 6 hour incubation in bacterial cultures. Furthermore, in vivo study proved that the PVA–DES–honey nanofibers accelerated the wound healing process, and they improved the wound healing rate on rat skin to 85.2% after 6 days of surgery, when compared to the control PVA (68.2%) and PVA–DES (76.3%) nanofibers. Overall, the nanofiber materials reported in our study showed potential as a green and biocompatible fast-dissolving drug delivery system and can be used for pharmaceutical fields, such as antibacterial wound dressing and oral ulcer stickers.
- 4 January 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (2) , 1012-1021
Open AccessFabrication of green poly(vinyl alcohol) nanofibers using natural deep eutectic solvent for fast-dissolving drug delivery
Fast-dissolving drug delivery systems are essential to drug delivery owing to the enhanced drug solubility, controlled drug concentration, target and rapid drug delivery. In this study, we developed fast-dissolving drug delivery systems using honey and acetylsalicylic acid-embedded poly(vinyl alcohol) (PVA) nanofibers based on natural deep eutectic solvent (DES). The efficacy of our fast-dissolving drug delivery system was tested by incorporating honey and acetylsalicylic acid in the PVA nanofibers. Firstly, the morphology and structure of the functional PVA–DES nanofibers (PVA–DES–honey and PVA–DES–ASA) were observed and analyzed, which proved the successful preparation of functional PVA–DES nanofibers. NIH/3T3 and HepG2 cells incubated on the nanofiber had more than 90% of cell viability, suggesting our materials were biocompatible and non-toxic. The nanofiber materials dissolved rapidly in artificial saliva solutions, suggesting potential use of our materials for fast dissolving drug delivery in oral cavities. The honey incorporated PVA nanofiber (PVA–DES–honey) showed a total bacterial reduction of 37.0% and 37.9% against E. coli and S. aureus, respectively, after 6 hour incubation in bacterial cultures. Furthermore, in vivo study proved that the PVA–DES–honey nanofibers accelerated the wound healing process, and they improved the wound healing rate on rat skin to 85.2% after 6 days of surgery, when compared to the control PVA (68.2%) and PVA–DES (76.3%) nanofibers. Overall, the nanofiber materials reported in our study showed potential as a green and biocompatible fast-dissolving drug delivery system and can be used for pharmaceutical fields, such as antibacterial wound dressing and oral ulcer stickers.
- Open Access
Fabrication of Hollow Silica Nanospheres with Ultra-High Acid Density for Efficient Heterogeneous Catalysis
Hollow silica nanospheres with ultra-high acid density were fabricated successfully via sulfonation of phenyl-functionalized hollow silica nanospheres, which were synthesized through a single micelle (F127 (EO106PO70EO106))-templated method, with phenyltrimethoxysilane and tetramethoxysilane (TMOS) as silane precursors under neutral conditions. The density of sulfonic acid reached as high as 1.97 mmol/g. The characterization results of 31P-NMR using triethylphosphine oxide as a probe molecule suggested that the acid strength of hybrid solid acids could be systematically tuned by tuning the content of sulfonic acid and higher acid density results in stronger acid strength. Attributed to the unique hollow structure and high-acid density, the sulfonic acid-functionalized hollow silica nanospheres exhibited good catalytic performance in the condensation reaction of benzaldehyde with ethylene glycol. Notably, this study found that the catalytic activity was significantly influenced by the acid density and the ultra-high acid loading was beneficial for the activity due to the enhanced acid strength. This novel solid-acid catalyst also showed good recyclability and could be reused for at least 11 runs.
Open AccessFabrication of Hollow Silica Nanospheres with Ultra-High Acid Density for Efficient Heterogeneous Catalysis
Hollow silica nanospheres with ultra-high acid density were fabricated successfully via sulfonation of phenyl-functionalized hollow silica nanospheres, which were synthesized through a single micelle (F127 (EO106PO70EO106))-templated method, with phenyltrimethoxysilane and tetramethoxysilane (TMOS) as silane precursors under neutral conditions. The density of sulfonic acid reached as high as 1.97 mmol/g. The characterization results of 31P-NMR using triethylphosphine oxide as a probe molecule suggested that the acid strength of hybrid solid acids could be systematically tuned by tuning the content of sulfonic acid and higher acid density results in stronger acid strength. Attributed to the unique hollow structure and high-acid density, the sulfonic acid-functionalized hollow silica nanospheres exhibited good catalytic performance in the condensation reaction of benzaldehyde with ethylene glycol. Notably, this study found that the catalytic activity was significantly influenced by the acid density and the ultra-high acid loading was beneficial for the activity due to the enhanced acid strength. This novel solid-acid catalyst also showed good recyclability and could be reused for at least 11 runs.