MLMusong Li

Musong Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Musong Li has a total of 32 co-authors. Here are the top co-authors by number of shared publications:

  • Xian Zhang

    Hebei university of Technology

    9 shared publications
  • Zhixin Chen

    Hebei university of Technology

    5 shared publications
  • Zhongyu Dai

    State Key Laboratory of Smart Power Distribution Equipment and System, Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Key Laboratory of Flexible DC Transmission Equipment and Technology Demonstration of Hebei Province, Hebei University of Technology, Tianjin, China

    5 shared publications
  • Fei Xu

    Hebei university of Technology

    4 shared publications
  • Xian Zhang

    State Key Laboratory of Intelligent Power Distribution Equipment and System, Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Key Laboratory of Flexible DC Transmission Equipment and Technology Demonstration of Hebei Province Hebei University of Technology Tianjin China

    4 shared publications
  • Zhongyu Dai

    State Key Laboratory of Intelligent Power Distribution Equipment and System, Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province, Key Laboratory of Flexible DC Transmission Equipment and Technology Demonstration of Hebei Province Hebei University of Technology Tianjin China

    4 shared publications

Latest Publications

  • An Effective Magnetothermal Mitigation Method for High-Power Wireless Power Transfer Systems

    by Yize Wei, Xian Zhang, Fei Xu, Yaxin Li, Zhixin Chen, Musong Li

    The magnetic thermal problem is a crucial factor for the reliability of high-power wireless power transfer (WPT) systems. However, local overheating in the junctions of ferrite blocks often happens, posing potential risks to system reliability. To tackle this problem, a magnetic flux bridge (MFB) method is proposed by filling the air gaps with magnetic conductive powder, which has merits of enhancing magnetic flux confinement and reducing temperature rise at ferrite block joints simultaneously. The effectiveness of the MFB method is judged through a comprehensive evaluation formula considering temperature, leakage flux and efficiency. An 11.1-kW experimental prototype is built to verify the practicability of the proposed method. The measured experimental results show that the proposed MFB method can significantly reduce the ferrite core's maximum temperature by 31.3%, maximum magnetic flux leakage by 8.1%, and improve system efficiency by 2.06%, thus enhancing the safety and reliability of high-power WPT converter systems.

  • A Multilayer Passive Composite Shielding Method for Wireless Power Transfer

    by Weida Xu, Qingxin Yang, Xian Zhang, Shiqi Liu, Ming Xue, Fei Xu, Musong Li

    Wireless power transfer (WPT) is emerging as an efficient contactless power replenishment method for unmanned transport vehicles in intelligent automation, with applications in automated production lines, logistics parks, and port operations. These settings demand high levels of safety and efficiency. For example, AGV charging stations in electromagnetically dense environments must achieve minimal magnetic leakage to avoid interfering with nearby sensors and control systems, while maintaining high transmission efficiency to support rapid charging cycles. Conventional single-layer ferrite shielding often struggles to reconcile the conflicting demands of stringent magnetic leakage suppression and high transmission efficiency. This paper proposes a novel multi-layer passive composite shielding structure based on a functional-grading strategy, where each material is assigned a specific role to optimize performance. This approach achieves omnidirectional leakage suppression while preserving transmission efficiency, delivering an unprecedented balance between electromagnetic compatibility and operational reliability. Theoretical models based on Maxwell’s equations and equivalent circuit theory were established to investigate how shielding parameters affect system performance. Subsequently, structural optimization was guided by finite element simulations. Experimental results demonstrate that the proposed structure reduces backside and lateral leakage magnetic flux densities by 58.78% and 31.85%, respectively, while maintaining relatively high transmission efficiency in a 0.3 kW/85 kHz system. Compared to existing passive shielding methods, the comprehensive performance index shows an improvement exceeding 50%, with minimal impact on coil self-inductance and mutual inductance. This work provides a cost-effective and efficient electromagnetic compatibility solution for WPT systems, particularly suitable for industrial applications demanding stringent safety and efficiency standards.


  • Design of Magnetic Coupling Structure With Wide Rotational Tolerance for Wireless Charging of Electric Bicycles

    by Zhongyu Dai, Yanhu Zhai, Quan Gan, Musong Li, Huihui Wang, Xian Zhang

    Electric bicycles (EBs) have emerged as a significant choice for green transportation due to their environmentally friendly and flexible characteristics. However, traditional wired charging methods have somewhat constrained the development of EBs while existing inductive wireless charging solutions exhibit high sensitivity to rotational misalignment. To tackle this problem, this article proposes a novel magnetic coupling structure (MCS) featuring an asymmetric coil design, which includes a semicircular transmitter and a disc‐shaped receiver with a 60° offset, owing to the merits of complementary field enhancement properties to achieve a wide range of rotational misalignment tolerance (RMT). An experimental prototype with 120 W/85 kHz is built to verify the effectiveness of the proposed RMT‐MCS. Experimental results demonstrate that our proposed MCS has a wide range of RMT ability. The results indicate that the proposed MCS maintains an output power of approximately 120 W across a 360° rotational range, with system efficiencies exceeding 84.5%.

  • Dual‐Frequency Power Distribution Method for Omnidirectional Wireless Power Transfer System

    by Musong Li, Xian Zhang, Ran Wang, Zhaoyang Yuan, Zhongyu Dai, Zhixin Chen, Weida Xu, Yize Wei

    Omnidirectional wireless power transfer (OWPT) systems are widely used in consumer electronic products (CEPs), industrial robots, medical devices, and more. However, the different CEPs usually have different power and frequency requirements to ensure various transmission characteristics. In order to meet the transmission requirements of CEPs with different power and frequency needs, this paper proposes a novel dual‐frequency power allocation method for OWPT. This method achieves independent regulation of output power for loads of different frequencies through the designed SS topology dual‐frequency resonant compensation structure and establishes corresponding parameter design methods. A dual‐frequency OWPT platform operating at 40 kHz/100 kHz was built to verify the correctness and effectiveness of the power allocation method. Experimental results show that when the input voltage corresponding to only one frequency changes, only the output power of the load corresponding to that frequency changes accordingly. Meanwhile, under the condition of dual‐load power supply, when the receiving coil is within a 90° offset range, the system's output power ranges from 49.25 to 57.15 W with a fluctuation rate of 14.8%, and the output efficiency ranges from 76.67% to 78.68% with a fluctuation rate of 2.59%.


  • A Regional Coupling Enhanced Omnidirectional Wireless Power Transfer System With Low-Fluctuation Regulation Strategy

    by Musong Li, Xian Zhang, Zhixin Chen, Zhongyu Dai, Liyuan Zhao

    Omnidirectional wireless power transfer (OWPT) systems can significantly enhance the charging freedom of the receiver (RC). Nevertheless, variations of RC position bring upon nonnegligible output fluctuations, affecting the system stability and efficiency. Existing researches focus on the optimization of magnetic coupling structure (MCS) while being constrained by high control complexity. In this letter, a regional coupling enhanced OWPT system with low-fluctuation regulation strategy is proposed for consumer electronics products (CEP). First, a MCS with self-decoupling multitransmitter coils (TCs) of the OWPT system is discussed in detail. Second, a regulation strategy with high output stability and system efficiency under different working conditions is proposed, which requires only the adjustment of the input phase shift angle on the corresponding TC. Finally, a 100 V/100 kHz experimental prototype is built to validate the regulation strategy of the OWPT system. Experimental results show that the output voltage can be stabilized between 6.31 and 6.67 V within a 90° rotational range, with a maximum fluctuation rate of 4.78% and the system efficiency is all over 76%. Meanwhile, in the planar region, the output voltage remains stable between 28.6 and 29.7 V, with a maximum fluctuation rate of 3.79% and an average system efficiency of 86.9%.


  • Active Adjustable Coil Receiver for Adaptive Output Power Based on Wireless Power Transfer

    by Zhongyu Dai, Huihui Wang, Yayun Ma, Musong Li, Yitong Zhou, Xian Zhang

    The wireless power transfer (WPT) system operates under variable load conditions. During different stages of charging, the power required by the load varies. Therefore, the WPT needs to adjust the voltage and power in real‐time to meet these differing demands. The power transfer power of WPT can be optimized for variable loads. This paper introduces an active adjustable coil receiver with adaptive output power. The end of the sliding rod is connected to the accessible part of each subcoil. The sliding rod can slide outward from the center of the coil or inward toward the center along the accessible part, determining the number of coil turns to be involved in coupling within the circuit. The proposed design can achieve the stabilized output power of ACR in the range of 10 to 30 W with a transmission distance varying from 5 to 10 cm, 10–38 W with a radial offset distance of 0.6–10 cm and 3–21 W with load of 20–40 . The receiver can meet the different power requirements of the load and is not sensitive to factors such as transmission distance and offset. The system can reduce the complexity of charging and power supply system design and effectively promote the application of wireless power transmission in the field of multiload equipment.


  • Regional Coupling Enhanced Self-Decoupling Omnidirectional Wireless Power Transfer Transmitter With Optimal Efficiency Strategy

    by Musong Li, Xian Zhang, Zhongyu Dai, Zhixin Chen, Ran Wang, Yitong Zhou

    Omnidirectional wireless power transfer (OWPT) systems are widely used in consumer electronics products (CEPs), industrial robots, unmanned detection equipment, etc. However, nondirectional electromagnetic energy transfer reduces system transmission efficiency and increases magnetic field leakage in the free working space. Besides, existing control strategies find it difficult to simultaneously ensure system simplicity and efficiency, thereby increasing system development and operating costs. In this article, a novel transmitter structure with high efficiency and low-leakage flux has first proposed, consisting of three square coils placed in an orthogonal position. Moreover, a self-decoupling reconfiguration method can further stimulate the potential of the transmitter, and the space electromagnetic field can be homogenized by the proposed optimal efficiency strategy. An OWPT platform with 100 V/100 kHz is built to prove the effectiveness of our designed transmitter structure. The experiment results show that the system efficiency remains 75.06%–77.17% within a 90° rotation range, with the fluctuation rate reduced to a maximum of 7.81%. The efficiency in the planar range is increased to 86.8%, with a fluctuation rate of only 4.1%.


  • Open Access

    Active Adjustable Coil Receiver for Adaptive Output Power Based on Wireless Power Transfer

    by Zhongyu Dai, Huihui Wang, Yayun Ma, Musong Li, Yitong Zhou, Xian Zhang

    Wireless charging systems typically operate under variable load conditions and the power required by different loads in space varies. The power required by different loads is different in the space. At different stages of charging, the characteristics of the load may also change. WPT needs to adjust the voltage and power in real time to meet the needs of different voltages and different working conditions. The power transfer power of WPT can be optimized for variable loads. This paper introduces an active adjustable coil receiver with adaptive output power. The active adjustment of the output power is achieved by changing the different positions of the sliding rod in the receiving coil. This design allows the receiver power to remain stable in the range of 3-21 W. Receiver can meet the different power requirements of the load, and is not sensitive to factors such as transmission distance and offset. The system can reduce the complexity of charging and power supply system design, effectively promote the application of wireless power transmission in the field of multi-load equipment.

  • Novel Designs of Magnetic Coupled Structure With 360° Rotation Misalignment Tolerance for AUVs’ Wireless Charging System

    by Zhixin Chen, Xian Zhang, Fei Xu, Qingxin Yang, Musong Li, Xiquan Deng

    Rotation misalignments cannot be avoided in an underwater wireless power transfer (UWPT) system of autonomous underwater vehicles (AUVs). However, the existing designs of magnetic coupled structures (MCS) in the AUVs’ wireless charging system can only achieve rotation misalignment tolerance (RMT) in a certain range, which would limit its practical applications because of the dead areas where the coupling coefficients of the MCS have significant variations and may even approach to zero at some rotation angles. In this letter, a novel complementary enhancement MCS with a U-shaped bipolar coil transmitter and an arc-shaped unipolar receiver is first proposed, which can achieve full range of 360° RMT capability, thus keeping stable and highly efficient outputs under any rotation angles (0°–360°). Moreover, the MCS can be reconfigured by optimizing the dimensions and winding density based on simulated results. An experimental UWPT platform with 500 W/85 kHz is built to prove the effectiveness of our designed MCS. The measured results show that output powers can remain stable at 420 W under any rotation ranges, while the system efficiency is all over 87%. Simultaneously, the constant voltage with the maximum fluctuation error of 5.37% can be achieved under load changing from 10 to 50 Ω.


  • Space Electromagnetic Optimization of Three-Coil WPT for Online Monitoring Equipment of High-Voltage Transmission Lines

    by Xian Zhang, Yitong Zhou, Wei Zhou, Zhongyu Dai, Musong Li

    In the context of a smart grid, sensors act as real-time monitoring devices. They enable the continuous assessment of the performance index for high-voltage transmission lines. Compared with the traditional lithium battery energy supply system, wireless power transmission (WPT) systems not only ensure the safety but also reduce the maintenance schedule. In the process of energy transmission, traditional insulator-clamped WPT systems are susceptible to interference from metal connectors. Moreover, electromagnetic energy leakage can pose threats to the safety of personnel working with charged equipment and the stable operation of nearby conductive sensing devices. This study analyzes the general principles of energy flow in multicoil WPT systems based on the Poynting's theorem. We introduce the energy contraction coefficients to analyze the distribution of electromagnetic energy in the three-coil systems Achieving energy confinement in the system by adding the relay coils. Combined with an engineering background, we establish constraints and optimize the relay coil's radius and position. We clarify the relationship between relay coil parameters and system energy confinement. Through simulations and experiments, it is shown that with a constant system output power, the optimized three-coil systems improve the energy contraction coefficient by 20.9% compared to the initial two-coil system and increase the magnetic flux density contraction coefficient by 19.4%. This effectively enhances the stability of energy transfer and the safety of the external electromagnetic environment in insulator-clamped WPT systems.