Xin Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xin Huang has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Ning Deng
Shanghai University
10 shared publications Congcong Ni
School of Environmental and Chemical Engineering
4 shared publications- Congcong Ni
School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China
3 shared publications - Jizhi Zhou
School of Economics, Shanghai University, Shanghai 200444, China
3 shared publications Xiaofan Pan
Shanghai University
3 shared publicationsChangjin Guo
School of Environmental and Chemical Engineering, Shanghai University, Shanghai 200444, China
2 shared publications
Latest Publications
- Top Cited Papers
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 10 (8) , 1928-1937
Oxalate Modulates Cadmium Mobility during Ferrihydrite Transformation: Roles of Dissolution Kinetics and Phase Selection
Cadmium (Cd) mobility is strongly influenced by ferrihydrite (Fh) transformation, and low-molecular-weight organic acids (LMWOAs) can modulate this process and thereby alter the Cd2+ environmental fate. However, the mechanisms by which organic ligands control Fh transformation and consequently influence Cd2+ behavior remain poorly understood. Here, we investigated Fh transformation and the associated fate of Cd2+ in the presence of oxalic acid (Ox), an organic ligand ubiquitous in natural environments. Results showed that Ox significantly increased Cd2+ release kinetics by accelerating Fh dissolution through coupled surface inner-sphere complexation and aqueous Fe3+-oxalate complexation. Ox also reduced the surface energy of hematite (Hm) from ∼340 to ∼183 mJ/m2, which increased the nucleation rate ratio of Hm to goethite (Gt) from ∼1.70 to ∼90.92. This shift promoted the preferential formation of Hm, which reduced the availability of reactive surface sites for Cd2+ readsorption and thereby increased the overall release extent. At growth stage, Ox altered Hm growth pathways from classical ion-by-ion growth to particle-mediated aggregation, facilitating the physical encapsulation of solid-associated Cd2+ and enhancing its stabilization in nonextractable forms. These findings demonstrated that Ox exerted a dual control on Cd2+ environmental behavior by promoting both its release and subsequent sequestration, highlighting the importance of coupling transformation kinetics, phase selection, and growth mechanisms in predicting the heavy metal fate in organic-rich environments.
- 14 July 2026
- Published by American Chemical Society (ACS) in ACS Earth and Space Chemistry
- Vol. 10 (8) , 1928-1937
Top Cited PapersOxalate Modulates Cadmium Mobility during Ferrihydrite Transformation: Roles of Dissolution Kinetics and Phase Selection
Cadmium (Cd) mobility is strongly influenced by ferrihydrite (Fh) transformation, and low-molecular-weight organic acids (LMWOAs) can modulate this process and thereby alter the Cd2+ environmental fate. However, the mechanisms by which organic ligands control Fh transformation and consequently influence Cd2+ behavior remain poorly understood. Here, we investigated Fh transformation and the associated fate of Cd2+ in the presence of oxalic acid (Ox), an organic ligand ubiquitous in natural environments. Results showed that Ox significantly increased Cd2+ release kinetics by accelerating Fh dissolution through coupled surface inner-sphere complexation and aqueous Fe3+-oxalate complexation. Ox also reduced the surface energy of hematite (Hm) from ∼340 to ∼183 mJ/m2, which increased the nucleation rate ratio of Hm to goethite (Gt) from ∼1.70 to ∼90.92. This shift promoted the preferential formation of Hm, which reduced the availability of reactive surface sites for Cd2+ readsorption and thereby increased the overall release extent. At growth stage, Ox altered Hm growth pathways from classical ion-by-ion growth to particle-mediated aggregation, facilitating the physical encapsulation of solid-associated Cd2+ and enhancing its stabilization in nonextractable forms. These findings demonstrated that Ox exerted a dual control on Cd2+ environmental behavior by promoting both its release and subsequent sequestration, highlighting the importance of coupling transformation kinetics, phase selection, and growth mechanisms in predicting the heavy metal fate in organic-rich environments.
- Top Cited Papers
- 14 October 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (42) , 17958-17968
The Role of Solid Electrolytes in Suppressing Joule Heating Effect for Scalable H 2 O 2 Electrosynthesis
- 14 October 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 13 (42) , 17958-17968
Top Cited PapersThe Role of Solid Electrolytes in Suppressing Joule Heating Effect for Scalable H 2 O 2 Electrosynthesis
- Open Access
Practical Algal Control in Lower Yangtze Reservoirs Using Composite Microfiltration Physical Enclosure
Source water reservoirs in the lower reaches of the Yangtze River are increasingly threatened by algal contamination, driven by fluctuations in upstream water quality. To ensure stable reservoir operation and protect downstream drinking water sources, physical enclosures are widely used. However, most algal pollution in reservoirs consists of microalgae (diameters < 100 μm), and conventional algae barriers are effective primarily against visible algal blooms but perform poorly against microscopic algal clusters. To address this limitation, we developed a composite microfiltration physical enclosure system by integrating a microfiltration membrane, supported by a mechanical layer, onto physical enclosures. The algal removal performance of this system was evaluated from lab-scale tests to field-scale applications. Results demonstrated that the composite membrane exhibited excellent interception efficiency against algal aggregates, with algae density in the filtered water reduced by over 80%. The composite enclosure effectively filters multiple algae species, significantly reducing the risk of algae entering downstream water treatment plants, thereby alleviating the burden of traditional processes and reducing operating costs.
Open AccessPractical Algal Control in Lower Yangtze Reservoirs Using Composite Microfiltration Physical Enclosure
Source water reservoirs in the lower reaches of the Yangtze River are increasingly threatened by algal contamination, driven by fluctuations in upstream water quality. To ensure stable reservoir operation and protect downstream drinking water sources, physical enclosures are widely used. However, most algal pollution in reservoirs consists of microalgae (diameters < 100 μm), and conventional algae barriers are effective primarily against visible algal blooms but perform poorly against microscopic algal clusters. To address this limitation, we developed a composite microfiltration physical enclosure system by integrating a microfiltration membrane, supported by a mechanical layer, onto physical enclosures. The algal removal performance of this system was evaluated from lab-scale tests to field-scale applications. Results demonstrated that the composite membrane exhibited excellent interception efficiency against algal aggregates, with algae density in the filtered water reduced by over 80%. The composite enclosure effectively filters multiple algae species, significantly reducing the risk of algae entering downstream water treatment plants, thereby alleviating the burden of traditional processes and reducing operating costs.
- Open Access
- 24 September 2025
- Published by MDPI AG in Separations
- Vol. 12 (10) , 259
Efficient Adsorptive Removal of Phosphonate Antiscalant HEDP by Mg-Al LDH
Phosphonate-based antiscalants such as 1-hydroxyethane-1,1-diphosphonic acid (HEDP) are extensively employed in industrial water treatment but pose significant environmental challenges due to their persistence and phosphorus content. In this study, Mg-Al layered double hydroxide (Mg-Al LDH) was synthesized and evaluated for its capacity to adsorb and remove HEDP. Mg-Al LDH showed a pronounced adsorption affinity and an exceptionally high capacity of 276.0 mg g−1 at pH 7.0. The adsorption process was remarkably fast, attaining 97% of equilibrium uptake within 45 min at 298 K. The adsorption data fit well to the Elovich kinetic model and the Langmuir isotherm, indicating that the adsorption process is dominated by chemisorption. Thermodynamic analysis further confirmed its spontaneous nature. Additionally, Mg-Al LDH demonstrated strong tolerance to environmental fluctuations. Characterization techniques, including XRD, FTIR, and zeta potential measurements, confirmed that HEDP adsorption onto Mg-Al LDH primarily occurs via surface complexation with metal sites and electrostatic attraction. These findings demonstrate that Mg-Al LDH is a highly effective adsorbent for removing persistent phosphonate pollutants from wastewater streams.
- 24 September 2025
- Published by MDPI AG in Separations
- Vol. 12 (10) , 259
Open AccessEfficient Adsorptive Removal of Phosphonate Antiscalant HEDP by Mg-Al LDH
Phosphonate-based antiscalants such as 1-hydroxyethane-1,1-diphosphonic acid (HEDP) are extensively employed in industrial water treatment but pose significant environmental challenges due to their persistence and phosphorus content. In this study, Mg-Al layered double hydroxide (Mg-Al LDH) was synthesized and evaluated for its capacity to adsorb and remove HEDP. Mg-Al LDH showed a pronounced adsorption affinity and an exceptionally high capacity of 276.0 mg g−1 at pH 7.0. The adsorption process was remarkably fast, attaining 97% of equilibrium uptake within 45 min at 298 K. The adsorption data fit well to the Elovich kinetic model and the Langmuir isotherm, indicating that the adsorption process is dominated by chemisorption. Thermodynamic analysis further confirmed its spontaneous nature. Additionally, Mg-Al LDH demonstrated strong tolerance to environmental fluctuations. Characterization techniques, including XRD, FTIR, and zeta potential measurements, confirmed that HEDP adsorption onto Mg-Al LDH primarily occurs via surface complexation with metal sites and electrostatic attraction. These findings demonstrate that Mg-Al LDH is a highly effective adsorbent for removing persistent phosphonate pollutants from wastewater streams.
- Top Cited Papers
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12910-12919
Short-Chain Carboxylic Acids Influencing Mineralization Mechanisms of Ferrihydrite Transformation to Hematite and Goethite
Transformation of poorly ordered ferrihydrite (Fh) into crystalline phases controls nutrient and contaminant transport. This process is strongly influenced by organic compounds; however, the mechanism remains unclear due to the structural complexity of organic compounds, particularly carboxylic density. We selected well-defined short-chain organic acids (OAc), i.e., formic acid (FA), oxalic acid (Ox), and citric acid (CA), which commonly occur as components of organic compounds, to examine how carboxylic density influences Fh transformation. Results showed that Fh transformation was mediated by specific organic-mineral/ion interactions. Monocarboxylic FA exhibited minimal binding affinity and thus had negligible influence on Fh transformation. In contrast, dicarboxylic Ox interacted with Fh and dissolved Fe3+, accelerating Fh dissolution by destabilizing Fe-O bonds of Fh and lowering aqueous Fe3+ activity. During subsequent nucleation, Ox preferentially adsorbed onto nascent hematite (Hm) nuclei via bidentate-mononuclear complexation. This interaction reduced Hm surface energy from 330 to 180 mJ·m-2, increasing nucleation rate ∼70-fold compared to goethite (Gt). Moreover, Ox likely guided Hm growth via oriented attachment, probably driven by van der Waals forces and/or patch-charge attraction. Conversely, tricarboxylic CA strongly bound to Fh, stabilizing Fh against transformation. This study offers mineralization perspectives for understanding organic-mediated Fh transformation in environmental and engineered systems.
- 17 June 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (25) , 12910-12919
Top Cited PapersShort-Chain Carboxylic Acids Influencing Mineralization Mechanisms of Ferrihydrite Transformation to Hematite and Goethite
Transformation of poorly ordered ferrihydrite (Fh) into crystalline phases controls nutrient and contaminant transport. This process is strongly influenced by organic compounds; however, the mechanism remains unclear due to the structural complexity of organic compounds, particularly carboxylic density. We selected well-defined short-chain organic acids (OAc), i.e., formic acid (FA), oxalic acid (Ox), and citric acid (CA), which commonly occur as components of organic compounds, to examine how carboxylic density influences Fh transformation. Results showed that Fh transformation was mediated by specific organic-mineral/ion interactions. Monocarboxylic FA exhibited minimal binding affinity and thus had negligible influence on Fh transformation. In contrast, dicarboxylic Ox interacted with Fh and dissolved Fe3+, accelerating Fh dissolution by destabilizing Fe-O bonds of Fh and lowering aqueous Fe3+ activity. During subsequent nucleation, Ox preferentially adsorbed onto nascent hematite (Hm) nuclei via bidentate-mononuclear complexation. This interaction reduced Hm surface energy from 330 to 180 mJ·m-2, increasing nucleation rate ∼70-fold compared to goethite (Gt). Moreover, Ox likely guided Hm growth via oriented attachment, probably driven by van der Waals forces and/or patch-charge attraction. Conversely, tricarboxylic CA strongly bound to Fh, stabilizing Fh against transformation. This study offers mineralization perspectives for understanding organic-mediated Fh transformation in environmental and engineered systems.
- 13 February 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (23)
Tailoring Electronic and Morphology Features of Iron‐Doped Ni2P Nanoflowers for Enhanced Ammonia Electrosynthesis in Solid Electrolyte Reactors
Electrochemical nitrate (NO3−) reduction to ammonia (NH3) presents a promising route for both wastewater treatment and ammonia generation but still suffers from sluggish catalytic activity, insufficient mass transfer, and the reliance on high‐concentration supporting electrolytes. This work reports an innovative and efficient ammonia electrosynthesis reactor by integrating a self‐assembled iron‐doped Ni2P (Fe‐Ni2P/NF) nanoflower cathode with a solid‐electrolyte (SE). The SE design eliminates the need for supporting electrolytes, providing a highly efficient ion‐conducting pathway and enabling the direct production of NH3 from NO3−. Through tailoring the electronic and surface characteristics of Fe‐Ni2P/NF, this reactor achieves complete NO3− reduction, 96.7% NH3 selectivity, and 81.8% faradaic efficiency with a NO3− concentration of 100 mm at a current density of 100 mA m−2. Density functional theory (DFT) calculations reveal that phosphating and Fe doping synergistically enhance NO3− adsorption and increase the availability of active hydrogen, thus favoring NH3 production at a low energy barrier of 0.695 eV. Additionally, the superhydrophilicity of the Fe‐Ni2P/NF nanoflower catalyst promotes mass transfer by facilitating electrolyte access and ensuring rapid gas bubble release. This study provides a sustainable and scalable method for converting NO3−‐laden wastewater into valuable ammonia products.
- 13 February 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (23)
Tailoring Electronic and Morphology Features of Iron‐Doped Ni2P Nanoflowers for Enhanced Ammonia Electrosynthesis in Solid Electrolyte Reactors
Electrochemical nitrate (NO3−) reduction to ammonia (NH3) presents a promising route for both wastewater treatment and ammonia generation but still suffers from sluggish catalytic activity, insufficient mass transfer, and the reliance on high‐concentration supporting electrolytes. This work reports an innovative and efficient ammonia electrosynthesis reactor by integrating a self‐assembled iron‐doped Ni2P (Fe‐Ni2P/NF) nanoflower cathode with a solid‐electrolyte (SE). The SE design eliminates the need for supporting electrolytes, providing a highly efficient ion‐conducting pathway and enabling the direct production of NH3 from NO3−. Through tailoring the electronic and surface characteristics of Fe‐Ni2P/NF, this reactor achieves complete NO3− reduction, 96.7% NH3 selectivity, and 81.8% faradaic efficiency with a NO3− concentration of 100 mm at a current density of 100 mA m−2. Density functional theory (DFT) calculations reveal that phosphating and Fe doping synergistically enhance NO3− adsorption and increase the availability of active hydrogen, thus favoring NH3 production at a low energy barrier of 0.695 eV. Additionally, the superhydrophilicity of the Fe‐Ni2P/NF nanoflower catalyst promotes mass transfer by facilitating electrolyte access and ensuring rapid gas bubble release. This study provides a sustainable and scalable method for converting NO3−‐laden wastewater into valuable ammonia products.
- Open Access
A Combination of UV and Disinfectant for Inactivating Viable but Nonculturable State Pseudomonas aeruginosa: Efficiency and Mechanisms
Conventional disinfection techniques, relying on a single disinfection step, often fail to directly eliminate microorganisms, instead causing them to enter a viable but nonculturable (VBNC) state. However, microorganisms in the VBNC state retain metabolic activity and can reactivate under suitable conditions, representing a “hidden source of contamination” that threatens drinking water safety. This study fundamentally assessed the feasibility of combined disinfection methods by integrating UV254 with disinfectant (NaClO, PAA, and PDS) for inactivating Pseudomonas aeruginosa (P. aeruginosa), an opportunistic pathogen that has been widely detected in water supply systems. The number of culturable cells was determined using the heterotrophic plate counting (HPC) method, and the number of VBNC cells was quantified using our recently developed qPCR approach. Quantitative analyses showed that combined disinfection methods can effectively reduce both culturable and VBNC cells by several orders of magnitude compared to a single disinfection step. Notably, VBNC P. aeruginosa, after 30 min of UV/NaCIO treatment, was below the detection limit (3.191 log CFU/mL) of PMA-qPCR. The reactivation experiment also confirmed that VBNC P. aeruginosa did not reactivate for 16 h after 30 min of UV/NaClO treatment under controlled laboratory conditions. The higher disinfection capacity of combined methods can be attributed to the generation of reactive radicals. This study highlighted combined disinfection as a promising approach for the inactivation of bacteria in the VBNC state, yet further studies are needed before an application can be considered for minimizing VBNC reactivation in city utility water processing or high-risk building water distribution systems.
Open AccessA Combination of UV and Disinfectant for Inactivating Viable but Nonculturable State Pseudomonas aeruginosa: Efficiency and Mechanisms
Conventional disinfection techniques, relying on a single disinfection step, often fail to directly eliminate microorganisms, instead causing them to enter a viable but nonculturable (VBNC) state. However, microorganisms in the VBNC state retain metabolic activity and can reactivate under suitable conditions, representing a “hidden source of contamination” that threatens drinking water safety. This study fundamentally assessed the feasibility of combined disinfection methods by integrating UV254 with disinfectant (NaClO, PAA, and PDS) for inactivating Pseudomonas aeruginosa (P. aeruginosa), an opportunistic pathogen that has been widely detected in water supply systems. The number of culturable cells was determined using the heterotrophic plate counting (HPC) method, and the number of VBNC cells was quantified using our recently developed qPCR approach. Quantitative analyses showed that combined disinfection methods can effectively reduce both culturable and VBNC cells by several orders of magnitude compared to a single disinfection step. Notably, VBNC P. aeruginosa, after 30 min of UV/NaCIO treatment, was below the detection limit (3.191 log CFU/mL) of PMA-qPCR. The reactivation experiment also confirmed that VBNC P. aeruginosa did not reactivate for 16 h after 30 min of UV/NaClO treatment under controlled laboratory conditions. The higher disinfection capacity of combined methods can be attributed to the generation of reactive radicals. This study highlighted combined disinfection as a promising approach for the inactivation of bacteria in the VBNC state, yet further studies are needed before an application can be considered for minimizing VBNC reactivation in city utility water processing or high-risk building water distribution systems.
- 9 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (8) , 3116-3124
Inhibiting Joule Heating to Enhance the Hydrogen Peroxide Electrosynthesis Efficiency at Industrial Level Current Density
- 9 April 2024
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 7 (8) , 3116-3124
Inhibiting Joule Heating to Enhance the Hydrogen Peroxide Electrosynthesis Efficiency at Industrial Level Current Density
- 4 April 2024
- Published by Elsevier in Environmental Research
- Vol. 252 (Pt 3) , 118870
Underestimated role of hydroxyl radicals for bromate formation in persulfate-based advanced oxidation processes
- 4 April 2024
- Published by Elsevier in Environmental Research
- Vol. 252 (Pt 3) , 118870
Underestimated role of hydroxyl radicals for bromate formation in persulfate-based advanced oxidation processes