AŠAndreja Škorjanc

Andreja Škorjanc

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andreja Škorjanc has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Characterization of Torrefied Waste Hops for Bioenergy Applications: Moisture Sorption Kinetics and Thermal Analysis

    by Andreja Škorjanc, Darko Goričanec, Klemen Rola, Aleksandra Petrovič, Danijela Urbancl

    Biomass is a promising renewable energy source; however, its direct use is limited by high hygroscopicity, low energy density, and challenging storage conditions. This study investigated the effect of thermal pretreatment temperature on the moisture sorption behavior and thermal stability of waste hops. Waste hops were torrefied at 250 °C, 350 °C, and 450 °C. Equilibrium moisture content (EMC) was measured at 30 °C under three relative humidity levels (50%, 70%, and 80%). The sorption data were fitted using four empirical models (Henderson, Chung-Pfost, Halsey, and Oswin), and model performance was evaluated using statistical parameters (R2, RMSE, RSS). Structural and compositional changes were analyzed by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and elemental and proximate analyses. For untreated hops, the Halsey and Oswin models described the data almost exactly (R2 ≥ 0.999), while the Halsey model was the most suitable for samples torrefied at 250 °C and 350 °C (R2 = 0.991 and 0.951, respectively). For the sample torrefied at 450 °C, none of the models provided an adequate fit. As the material became less hygroscopic, the agreement of all four models decreased (R2 of the best model from 1.000 for WH-raw to < 0.77 for WH-450). Because only three relative humidity levels were measured, the model ranking should be regarded as indicative. At 80% RH, torrefaction at 250 °C, 350 °C and 450 °C reduced the EMC by 30%, 50% and 64%, respectively, compared with that of the untreated material. With increasing torrefaction temperature, the onset decomposition temperature increased from 212.5 °C (WH-raw) to 412.3 °C (WH-450), and the final decomposition temperature from 512.9 °C to 581.4 °C. The improvement in hygroscopic and thermal stability with torrefaction temperature was not linear: the additional reduction in EMC became smaller at higher temperatures, and the higher heating value increased mainly between 250 and 350 °C, with only a marginal further gain at 450 °C. Total mass loss decreased from 77.11% to 39.77%, while the solid residue at 900 °C increased from 22.89% to 60.23%. FTIR spectra indicated degradation of hydrophilic functional groups. Thermal pretreatment improved the hydrophobicity and thermal stability of waste hops. The validated sorption models offer a useful tool for optimizing drying and storage conditions, enhancing the potential of waste hops as a sustainable bioenergy feedstock.

  • Open Access

    Advancing Energy Recovery: Evaluating Torrefaction Temperature Effects on Food Waste Properties from Fruit and Vegetable Processing

    by Andreja Škorjanc, Sven Gruber, Klemen Rola, Darko Goričanec, Danijela Urbancl

    Most organic waste from food production is still not used for energy production. From the perspective of energy production, one option is to valorise the properties of organic waste. The fruit juice industry is growing rapidly and generates large amounts of waste. One of the main wastes in food and fruit juice processing is peach pits and apple peels. The aim of this study was to analyse the influence of torrefaction temperature on the properties of food waste, namely apple peels, peach pits and pea shells, in order to improve their energy value and determine their potential for further use and valorisation as a renewable energy source. The aim was to analyse the influence of different torrefaction temperatures on the heating value (HHV), mass yield (MY) and energy yield (EY) in order to better understand the behavior of the thermal properties of individual selected samples. The torrefaction process was carried out at temperatures of 250 °C, 350 °C and 450 °C. The obtained biomass was compared with dried biomass. For apple peels, HHV after torrefaction was (28 kJ/kg), MY decreased by (66–34%), while EY fell by (97–83%). Peach pits, despite a higher HHV after torrefaction (18 kJ/kg), achieved low MY (38–89%) and EY (59–99%), which reduces their efficiency in biochar production. Pea peels had EY (82–97%) and a lower HHV after torrefaction (11 kJ/kg), but their high ash content limits their wider use. The results confirm that, with increasing temperature, MY and EY for all selected biomasses decrease, which is a consequence of the degradation of hemicellulose and cellulose and the loss of volatile compounds. In most cases, increasing the torrefaction temperature improved the resistance to moisture adsorption, as this is related to the thermal process that causes structural changes. The results showed that the torrefaction process improved the hydrophobic properties of the biomass samples. Temperature was seen to have a great impact on mass energy efficiency. Apple peels generally had the highest mass and energy yield.


  • Open Access

    Assessing Energy Potential and Chemical Composition of Food Waste Thermodynamic Conversion Products: A Literature Review

    by Andreja Škorjanc, Darko Goričanec, Danijela Urbancl

    This study examines the considerable volume of food waste generated annually in Slovenia, which amounted to over 143,000 tons in 2020. The analysis shows that 40% of food waste consists of edible parts, highlighting the potential for reduction through increased consumer awareness and attitudes towards food consumption. The study shows that the consumption phase contributes the most to waste food (46%), followed by primary production (25%) and processing/manufacture (24%). The study addresses various thermodynamic processes, in particular, thermal conversion methods, such as torrefaction pyrolysis and hydrothermal carbonization, which optimize energy potential by reducing the atomic ratio (H/C) and (O/C), thereby increasing calorific value and facilitating the production of solid fuels. The main results show the effectiveness of torrefaction, pyrolysis and hydrothermal carbonization (HTC) in increasing the energy potential of food waste.