Andreas Frehn
Research Subjects
Andreas Frehn has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Andrew Tarrant
Materion UK Ltd., Farnborough GU14 6XE, UK
2 shared publications - Fritz Grensing
Materion Corporation, Mayfield Heights, OH 44124, USA
2 shared publications - James Nicholson
Materion UK Ltd., Farnborough GU14 6XE, UK
2 shared publications - Martyn Acreman
Materion Corporation, Mayfield Heights, OH 44124, USA
2 shared publications - Nick Farrah
Materion Corporation, Mayfield Heights, OH 44124, USA
2 shared publications - Peter Lewis
Materion UK Ltd
2 shared publications
Latest Publications
- Open Access
Effect of Hydrogen Charging on the Mechanical Properties of High-Strength Copper-Base Alloys, Austenitic Stainless Steel AISI 321, Inconel 625 and Ferritic Steel 1.4511
Hydrogen embrittlement (HE) poses the risk of premature failure for many metals, especially high-strength steels. Due to the utilization of hydrogen as an environmentally friendly energy source, efforts are made to improve the resistance to HE at elevated pressures and temperatures. In addition, applications in hydrogen environments might require specific material properties in terms of thermal and electrical conductivity, magnetic properties as well as corrosion resistance. In the present study, three high-strength Cu-base alloys (Alloy 25, PerforMet® and ToughMet® 3) as well as austenitic stainless AISI 321, Ni-base alloy IN 625 and ferritic steel 1.4511 are charged in pressurized hydrogen and subsequently tested by means of Slow Strain Rate Testing (SSRT). The results show that high-strength Cu-base alloys exhibit a great resistance to HE and could prove to be suitable for materials for a variety of hydrogen applications with rough conditions such as high pressure, elevated temperature and corrosive environments.
Open AccessEffect of Hydrogen Charging on the Mechanical Properties of High-Strength Copper-Base Alloys, Austenitic Stainless Steel AISI 321, Inconel 625 and Ferritic Steel 1.4511
Hydrogen embrittlement (HE) poses the risk of premature failure for many metals, especially high-strength steels. Due to the utilization of hydrogen as an environmentally friendly energy source, efforts are made to improve the resistance to HE at elevated pressures and temperatures. In addition, applications in hydrogen environments might require specific material properties in terms of thermal and electrical conductivity, magnetic properties as well as corrosion resistance. In the present study, three high-strength Cu-base alloys (Alloy 25, PerforMet® and ToughMet® 3) as well as austenitic stainless AISI 321, Ni-base alloy IN 625 and ferritic steel 1.4511 are charged in pressurized hydrogen and subsequently tested by means of Slow Strain Rate Testing (SSRT). The results show that high-strength Cu-base alloys exhibit a great resistance to HE and could prove to be suitable for materials for a variety of hydrogen applications with rough conditions such as high pressure, elevated temperature and corrosive environments.
- Open Access
Aluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion
With the ever-growing emphasis on global decarbonization and rapid increases in the power densities of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with coefficient of thermal expansion (CTE) mismatches between components. The Al–Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as the aerospace, automotive, consumer electronics, defense, EV, and space sectors. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al–Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17 μm/(m·°C)), as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13 μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructural, physical, and mechanical properties of these Al–Si alloys.
Open AccessAluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion
With the ever-growing emphasis on global decarbonization and rapid increases in the power densities of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with coefficient of thermal expansion (CTE) mismatches between components. The Al–Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as the aerospace, automotive, consumer electronics, defense, EV, and space sectors. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al–Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17 μm/(m·°C)), as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13 μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructural, physical, and mechanical properties of these Al–Si alloys.
- Open Access
- 17 April 2024
- Published by MDPI AG in Preprints.org
Aluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion
With the ever-growing emphasis on global decarbonization and rapid increases in the power density of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with Coefficient of Thermal Expansion (CTE) mismatch between components. The Al-Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as aerospace, automotive, consumer electronics, defense, EV and space. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al-Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17μm/(m·°C)) as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructure, physical and mechanical properties of these Al-Si alloys.
- 17 April 2024
- Published by MDPI AG in Preprints.org
Open AccessAluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion
With the ever-growing emphasis on global decarbonization and rapid increases in the power density of electronics equipment in recent years, new methods and lightweight materials have been developed to manage heat load as well as interfacial stresses associated with Coefficient of Thermal Expansion (CTE) mismatch between components. The Al-Si system provides an attractive combination of CTE performance and high thermal conductivity whilst being a very lightweight option. Such materials are of interest to industries where thermal management is a key design criterion, such as aerospace, automotive, consumer electronics, defense, EV and space. This paper will describe the development and manufacture of a family of high-performance hypereutectic Al-Si alloys (AyontEX™) by a powder metallurgy method. These alloys are of particular interest for structural heat sink applications that require high reliability under thermal cycling (CTE of 17μm/(m·°C)) as well as reflective optics and instrument assemblies that require good thermal and mechanical stability (CTE of 13μm/(m·°C)). Critical performance relationships are presented, coupled with the microstructure, physical and mechanical properties of these Al-Si alloys.