Max Tabak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Max Tabak has a total of 139 co-authors. Here are the top co-authors by number of shared publications:
- E. Michael Campbell
Laboratory for Laser Energetics, University of Rochester 1 , Rochester, New York 14623-1299, USA
4 shared publications - Adam B. Sefkow
University of Rochester
3 shared publications - Andreas J. Kemp
Lawrence Livermore National Laboratory , Livermore, California 94550
3 shared publications - Cliff A. Thomas
University of Rochester
3 shared publications - Neil Alexander
General Atomics 2 , San Diego, California 92121
3 shared publications - A. R. Christopherson
Laboratory for Laser Energetics, University of Rochester , Rochester, New York 14623-1299
2 shared publications
Latest Publications
- Open Access
- 8 April 2026
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (7) , 1-14
The Development of Kinetic and Radiation Hydrodynamics Modeling of Thermonuclear Burn Propagation in Isochoric p - 11 B Through the Support of the INFUSE Program
- 8 April 2026
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 82 (7) , 1-14
Open AccessThe Development of Kinetic and Radiation Hydrodynamics Modeling of Thermonuclear Burn Propagation in Isochoric p - 11 B Through the Support of the INFUSE Program
- Open Access
- 1 April 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (4)
Insufficient energy gain of pure proton–boron fuel for IFE: 1D radiation–hydrodynamic simulations
Deuterium–tritium has the highest reactivity and lowest ideal ignition temperature of the fusion reactions, but it poses engineering challenges in inertial fusion energy (IFE) applications associated with tritium supply and cryogenic target handling, as well as heat-transfer flow activation and reactor first-wall material damage by 14 MeV neutrons. Aneutronic fuel cycles, such as proton–boron (p11B) fusion, may have reduced engineering issues but have significantly more demanding conditions to ignite and burn. Recent favorable updates to reactivity and the inclusion of suprathermal effects and non-equilibrium burn have prompted this reevaluation of ignition and gain of p11B fuel for IFE. We have studied thermonuclear burn wave propagation in highly compressed BH5 and B2H6 fuels using the HELIOS-CR 1D radiation–hydrodynamics code, which has been updated to use the latest p11B reactivity, a multiplier to approximate suprathermal effects, and temperature-dependent alpha particle transport. Starting from fast ignition-like isochoric initial configurations, we have identified the hot spot requirements for self-sustained burn wave propagation: at the density of 4000 g/cm3 and the hot spot temperature Ths=400 keV, the ignition of BH5 requires the hot spot areal density of 25 g/cm2 and energy over 200 MJ, while the ignition of B2H6 requires at least 70 g/cm2. At Ths<200 keV, achieving ignition is hardly possible. We have estimated the maximal fuel gain for pure p11B fuel as a function of the cold fuel adiabat for fusion yields up to 3–5 GJ and found that they are insufficient for IFE power plant operation.
- 1 April 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (4)
Open AccessInsufficient energy gain of pure proton–boron fuel for IFE: 1D radiation–hydrodynamic simulations
Deuterium–tritium has the highest reactivity and lowest ideal ignition temperature of the fusion reactions, but it poses engineering challenges in inertial fusion energy (IFE) applications associated with tritium supply and cryogenic target handling, as well as heat-transfer flow activation and reactor first-wall material damage by 14 MeV neutrons. Aneutronic fuel cycles, such as proton–boron (p11B) fusion, may have reduced engineering issues but have significantly more demanding conditions to ignite and burn. Recent favorable updates to reactivity and the inclusion of suprathermal effects and non-equilibrium burn have prompted this reevaluation of ignition and gain of p11B fuel for IFE. We have studied thermonuclear burn wave propagation in highly compressed BH5 and B2H6 fuels using the HELIOS-CR 1D radiation–hydrodynamics code, which has been updated to use the latest p11B reactivity, a multiplier to approximate suprathermal effects, and temperature-dependent alpha particle transport. Starting from fast ignition-like isochoric initial configurations, we have identified the hot spot requirements for self-sustained burn wave propagation: at the density of 4000 g/cm3 and the hot spot temperature Ths=400 keV, the ignition of BH5 requires the hot spot areal density of 25 g/cm2 and energy over 200 MJ, while the ignition of B2H6 requires at least 70 g/cm2. At Ths<200 keV, achieving ignition is hardly possible. We have estimated the maximal fuel gain for pure p11B fuel as a function of the cold fuel adiabat for fusion yields up to 3–5 GJ and found that they are insufficient for IFE power plant operation.
- 26 January 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (4) , 045101
Enhancements in Laser-Direct-Drive Nuclear Performance with Target Radius
Inertial confinement fusion is likely to require significant improvements in technology and design for large targets to implode at high driver energies. To assess the potential for benefits, we report on nuclear performance as a function of target radius R_{t} in direct-drive cryogenic implosions as performed on the OMEGA laser. The neutron yield and areal density are found to increase as R_{t}^{5.0±0.2} and R_{t}^{1.8±0.2}, respectively, and exhibit a much stronger dependence on target radius than previous studies have assumed. As this Letter demonstrates, these types of sensitivities should be expected when implosions are unstable, and have been degraded by a range of multidimensional effects in 3D. If the imperfections in a target and laser system are fixed in magnitude, it follows that larger implosions have higher relative quality, and approach criteria to ignite much more quickly than commonly appreciated.
- 26 January 2026
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 136 (4) , 045101
Enhancements in Laser-Direct-Drive Nuclear Performance with Target Radius
Inertial confinement fusion is likely to require significant improvements in technology and design for large targets to implode at high driver energies. To assess the potential for benefits, we report on nuclear performance as a function of target radius R_{t} in direct-drive cryogenic implosions as performed on the OMEGA laser. The neutron yield and areal density are found to increase as R_{t}^{5.0±0.2} and R_{t}^{1.8±0.2}, respectively, and exhibit a much stronger dependence on target radius than previous studies have assumed. As this Letter demonstrates, these types of sensitivities should be expected when implosions are unstable, and have been degraded by a range of multidimensional effects in 3D. If the imperfections in a target and laser system are fixed in magnitude, it follows that larger implosions have higher relative quality, and approach criteria to ignite much more quickly than commonly appreciated.
- Open Access
- 1 January 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (1)
Focusing of laser-accelerated ions with spherically curved targets
A theoretical model for laser-accelerated ion focusing from spherically curved targets using a Gaussian self-similar solution is presented. This model describes the evolution of the focal location and focal radius with final ion energy and the initial radial boundary of the ions, the latter being a function of both target geometry and the ion acceleration radius for a given ion energy. The theory is supported by particle-in-cell simulations of a variety of target shapes with varying radii of curvature and target opening angles, as well as variations in the injected electron beam radius and energy spectrum. The theory and simulations suggest that the focal location varies linearly with the radius of curvature, with the square root of the ratio of ion energy to effective electron temperature, and monotonically increases with the energy-dependent ratio of the initial ion radial boundary to the radius of curvature. Considering ponderomotive acceleration, this suggests that the focal length should scale inversely with intensity, (ILλL2)−1/4, suggesting a 10× increase in intensity will reduce the focal distance by ̃1.8× for a given ion energy.
- 1 January 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (1)
Open AccessFocusing of laser-accelerated ions with spherically curved targets
A theoretical model for laser-accelerated ion focusing from spherically curved targets using a Gaussian self-similar solution is presented. This model describes the evolution of the focal location and focal radius with final ion energy and the initial radial boundary of the ions, the latter being a function of both target geometry and the ion acceleration radius for a given ion energy. The theory is supported by particle-in-cell simulations of a variety of target shapes with varying radii of curvature and target opening angles, as well as variations in the injected electron beam radius and energy spectrum. The theory and simulations suggest that the focal location varies linearly with the radius of curvature, with the square root of the ratio of ion energy to effective electron temperature, and monotonically increases with the energy-dependent ratio of the initial ion radial boundary to the radius of curvature. Considering ponderomotive acceleration, this suggests that the focal length should scale inversely with intensity, (ILλL2)−1/4, suggesting a 10× increase in intensity will reduce the focal distance by ̃1.8× for a given ion energy.
- Open Access
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
On the role of self-generated magnetic fields in focused ion beams driven by intense picosecond laser pulses
We investigate the physics of ion beam focusing in the interaction of intense picosecond laser pulses with concave foils, using two-dimensional particle-in-cell simulations. Curved targets have been observed to deliver brighter multi-MeV ion beams than flat targets, and they could be used to ignite pre-compressed ICF fusion capsules in a scheme called ion fast ignition. Focusing is achieved by shaping the target and relying on an ion acceleration mechanism in which the ions are accelerated normal to the target surface; subsequently, the plasma expansion grows magnetic fields that advect with the plasma and deflect ions away from the target symmetry axis, causing the focal spot to shift downstream from its geometric location. The drop in both electric and magnetic field strengths in the expanding plasma makes the ion beam envelope asymmetric with respect to the focusing plane.
- 1 September 2025
- Published by AIP Publishing in Physics of Plasmas
- Vol. 32 (9)
Open AccessOn the role of self-generated magnetic fields in focused ion beams driven by intense picosecond laser pulses
We investigate the physics of ion beam focusing in the interaction of intense picosecond laser pulses with concave foils, using two-dimensional particle-in-cell simulations. Curved targets have been observed to deliver brighter multi-MeV ion beams than flat targets, and they could be used to ignite pre-compressed ICF fusion capsules in a scheme called ion fast ignition. Focusing is achieved by shaping the target and relying on an ion acceleration mechanism in which the ions are accelerated normal to the target surface; subsequently, the plasma expansion grows magnetic fields that advect with the plasma and deflect ions away from the target symmetry axis, causing the focal spot to shift downstream from its geometric location. The drop in both electric and magnetic field strengths in the expanding plasma makes the ion beam envelope asymmetric with respect to the focusing plane.
- Open Access
- 27 November 2024
- Published by Office of Scientific and Technical Information (OSTI)
Simulation of Direct-Drive Hybrid Using Two Opposed Beams for Inertial Fusion Energy
Xcimer Energy is working to deliver high levels of laser light at the costs required for applications in fusion energy. The architecture of their integrated laser system is unique, in that it naturally supports a target which is illuminated by two opposed beams, and in a manner that can readily complement a reactor. This INFUSE proposal was submitted to investigate a target concept termed the Direct-Drive Hybrid or DDH, and make special use of radiation hydrodynamic simulations and expertise available to the Laboratory for Laser Energetics. The associated capabilities are unique to the field, and take great advantage of investments and advances made by the DOE and DOD over many decades. The primary goals were to stand up the DDH design in calculations for the first time, study and refine the concept, and provide the scientific basis for understanding and projecting proposals by Xcimer Energy. The main accomplishments have been summarized below.
- 27 November 2024
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessSimulation of Direct-Drive Hybrid Using Two Opposed Beams for Inertial Fusion Energy
Xcimer Energy is working to deliver high levels of laser light at the costs required for applications in fusion energy. The architecture of their integrated laser system is unique, in that it naturally supports a target which is illuminated by two opposed beams, and in a manner that can readily complement a reactor. This INFUSE proposal was submitted to investigate a target concept termed the Direct-Drive Hybrid or DDH, and make special use of radiation hydrodynamic simulations and expertise available to the Laboratory for Laser Energetics. The associated capabilities are unique to the field, and take great advantage of investments and advances made by the DOE and DOD over many decades. The primary goals were to stand up the DDH design in calculations for the first time, study and refine the concept, and provide the scientific basis for understanding and projecting proposals by Xcimer Energy. The main accomplishments have been summarized below.
- Open Access
- 1 November 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (11)
Hybrid direct drive with a two-sided ultraviolet laser
This paper presents a “hybrid” approach to direct drive inertial confinement fusion that can exploit a high-energy gas laser with two opposed beams. The target and driver are asymmetric, much like experiments performed on the National Ignition Facility, but have been designed to benefit from scale and their particular compatibility with a fusion power plant. The imploded masses (and areal densities) are increased by a factor of 12 (3) relative to findings by Abu-Shawareb et al. [Phys. Rev. Lett. 129, 075001 (2022)] and provide a path to high-gain implosions that robustly ignite. The design also mitigates common concerns such as laser imprint and cross-beam energy transfer. We discuss the rationales for a hybrid target, the methods used to control implosion symmetry, and the implication(s) for inertial fusion energy.
- 1 November 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (11)
Open AccessHybrid direct drive with a two-sided ultraviolet laser
This paper presents a “hybrid” approach to direct drive inertial confinement fusion that can exploit a high-energy gas laser with two opposed beams. The target and driver are asymmetric, much like experiments performed on the National Ignition Facility, but have been designed to benefit from scale and their particular compatibility with a fusion power plant. The imploded masses (and areal densities) are increased by a factor of 12 (3) relative to findings by Abu-Shawareb et al. [Phys. Rev. Lett. 129, 075001 (2022)] and provide a path to high-gain implosions that robustly ignite. The design also mitigates common concerns such as laser imprint and cross-beam energy transfer. We discuss the rationales for a hybrid target, the methods used to control implosion symmetry, and the implication(s) for inertial fusion energy.
- Open Access
- 1 May 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (5)
Directly driven magnetized fast-ignition targets with steep density gradients for inertial fusion energy
The development of advanced targets capable of achieving ignition with improved energy gain at lower driver energies is one of four key technical challenges to be solved in order to realize economical inertial fusion energy. We report the minimum energy necessary for a small hemispherical mass of fast-ignited high-density deuterium–tritium fuel to explosively ignite a significantly larger hemispherical mass of assembled cold fuel with much lower mass density, both with and without a flux-compressed magnetic field connecting the two regions. With the magnetic field, the burn rate improves, and lower energy states become more effective. The imploded fuel reservoir available in the lower-density, larger-mass region of the steep density gradient determines whether the fusion yield is several hundred MJ or up to a few GJ. We report a case wherein the cold reservoir ignited and produced high gain with the assistance of only ∼700 kJ of hotspot yield, an amount that has already been demonstrated as feasible in laboratory experiments using indirect-drive targets.
- 1 May 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (5)
Open AccessDirectly driven magnetized fast-ignition targets with steep density gradients for inertial fusion energy
The development of advanced targets capable of achieving ignition with improved energy gain at lower driver energies is one of four key technical challenges to be solved in order to realize economical inertial fusion energy. We report the minimum energy necessary for a small hemispherical mass of fast-ignited high-density deuterium–tritium fuel to explosively ignite a significantly larger hemispherical mass of assembled cold fuel with much lower mass density, both with and without a flux-compressed magnetic field connecting the two regions. With the magnetic field, the burn rate improves, and lower energy states become more effective. The imploded fuel reservoir available in the lower-density, larger-mass region of the steep density gradient determines whether the fusion yield is several hundred MJ or up to a few GJ. We report a case wherein the cold reservoir ignited and produced high gain with the assistance of only ∼700 kJ of hotspot yield, an amount that has already been demonstrated as feasible in laboratory experiments using indirect-drive targets.
- Open Access
- 1 April 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (4)
Laser-to-proton conversion efficiency studies for proton fast ignition
We assess the conversion efficiency from intense picosecond laser pulses to multi-MeV ion beams for a wide range of laser and target parameters, using 2D kinetic particle-in-cell simulations. Scalings are addressed in a quasi-one-dimensional geometry, leaving out beam divergence. Then, we study the conversion efficiency into a narrow spatial band along the laser axis for flat and hemispherical targets in large-scale 2D simulations. Combining these findings allows us to calculate the energy requirements for ignition of a compressed ICF target with an intense proton beam in a fast-ignition scenario.
- 1 April 2024
- Published by AIP Publishing in Physics of Plasmas
- Vol. 31 (4)
Open AccessLaser-to-proton conversion efficiency studies for proton fast ignition
We assess the conversion efficiency from intense picosecond laser pulses to multi-MeV ion beams for a wide range of laser and target parameters, using 2D kinetic particle-in-cell simulations. Scalings are addressed in a quasi-one-dimensional geometry, leaving out beam divergence. Then, we study the conversion efficiency into a narrow spatial band along the laser axis for flat and hemispherical targets in large-scale 2D simulations. Combining these findings allows us to calculate the energy requirements for ignition of a compressed ICF target with an intense proton beam in a fast-ignition scenario.
- Open Access
- 1 July 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (7) , 073507
Converting existing optical detectors into fast x-ray detectors
The very short burn time and small size of burning plasmas created at advanced laser-fusion facilities will require high-spatial-resolution imaging diagnostics with fast time resolution. These instruments will need to function in an environment of extremely large neutron fluxes that will cause conventional diagnostics to fail because of radiation damage and induced background levels. One solution to this challenge is to perform an ultrafast conversion of the x-ray signals into the optical regime before the neutrons are able to reach the detector and then to relay image the signal out of the chamber and into a shielded bunker, protected from the effects of these neutrons. With this goal in mind, the OMEGA laser was used to demonstrate high-temporal-resolution x-ray imaging by using an x-ray snout to image an imploding backlighter capsule onto a semiconductor. The semiconductor was simultaneously probed with the existing velocity interferometry system for any surface reflector (VISAR) diagnostic, which uses an optical streak camera and provided a one-dimensional image of the phase in the semiconductor as a function of time. The phase induced in the semiconductor was linearly proportional to the x-ray emission from the backlighter capsule. This approach would then allow a sacrificial semiconductor to be attached at the end of an optical train with the VISAR and optical streak camera placed in a shielded bunker to operate in a high neutron environment and obtain time-dependent one-dimensional x-ray images or time-dependent x-ray spectra from a burning plasma.
- 1 July 2021
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 92 (7) , 073507
Open AccessConverting existing optical detectors into fast x-ray detectors
The very short burn time and small size of burning plasmas created at advanced laser-fusion facilities will require high-spatial-resolution imaging diagnostics with fast time resolution. These instruments will need to function in an environment of extremely large neutron fluxes that will cause conventional diagnostics to fail because of radiation damage and induced background levels. One solution to this challenge is to perform an ultrafast conversion of the x-ray signals into the optical regime before the neutrons are able to reach the detector and then to relay image the signal out of the chamber and into a shielded bunker, protected from the effects of these neutrons. With this goal in mind, the OMEGA laser was used to demonstrate high-temporal-resolution x-ray imaging by using an x-ray snout to image an imploding backlighter capsule onto a semiconductor. The semiconductor was simultaneously probed with the existing velocity interferometry system for any surface reflector (VISAR) diagnostic, which uses an optical streak camera and provided a one-dimensional image of the phase in the semiconductor as a function of time. The phase induced in the semiconductor was linearly proportional to the x-ray emission from the backlighter capsule. This approach would then allow a sacrificial semiconductor to be attached at the end of an optical train with the VISAR and optical streak camera placed in a shielded bunker to operate in a high neutron environment and obtain time-dependent one-dimensional x-ray images or time-dependent x-ray spectra from a burning plasma.