Dmitry V. Kolyada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dmitry V. Kolyada has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Dmitrii D. Firsov
Micro- and Nanoelectronics Department, Saint Petersburg Electrotechnical University “LETI”, 197022 Saint Petersburg, Russia
6 shared publications - Oleg Sergeyevich Komkov
Санкт-Петербургский государственный электротехнический университет "ЛЭТИ" им. В.И. Ульянова (Ленина), Санкт-Петербург, Россия
4 shared publications - Vladimir Ivanovich Mashanov
A.V. Rzhanov Institute of Semiconductor Physics SB RAS, pr. Lavrentieva 13, Novosibirsk, 630090, RUSSIAN FEDERATION
4 shared publications - Vyacheslav Alexeyevich Timofeev
A.V. Rzhanov Institute of Semiconductor Physics SB RAS, pr. Lavrentieva 13, Novosibirsk, 630090, RUSSIAN FEDERATION
4 shared publications - Alexander I. Nikiforov
Russian Academy of Sciences
3 shared publications - Ilya Skvortsov
A.V. Rzhanov Institute of Semiconductor Physics SB RAS, pr. Lavrentieva 13, Novosibirsk, 630090, RUSSIAN FEDERATION
2 shared publications
Latest Publications
- Open Access
- 25 October 2025
- Published by Elsevier in Next Materials
- Vol. 9
Multiple quantum wells with ultrathin high-Sn fraction GeSn layers: Structural and optical properties
- 25 October 2025
- Published by Elsevier in Next Materials
- Vol. 9
Open AccessMultiple quantum wells with ultrathin high-Sn fraction GeSn layers: Structural and optical properties
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Microelectronics
- Vol. 53 (8) , 845-849
Impact of Sulphide Passivation of the Substrate on the Photoluminescent Properties of InAs Autoepitaxial Layers
The photoluminescent properties of autoepitaxial layers of indium arsenide are studied using low-temperature Fourier-transform infrared spectroscopy. The structures are grown by the method of chlorine hydride vapour-phase epitaxy on heavily doped n+-InAs substrates. Sulfide passivation of the substrates is carried out in a unimolar aqueous solution of sodium sulfide at room temperature, which leads to the removal of the natural oxide layer and the formation of a sulfur layer protecting the substrate surface. Three separate peaks are detected in the photoluminescence spectra of the structures, measured with a Fourier-transform infrared spectrometer at a temperature of 8 K. The peak with an energy of 415 meV is attributed to a direct interband transition in indium arsenide. The power dependence of the second peak, with an energy of 400 meV, is sublinear, which makes it possible to attribute it to the emission of bound excitons. In the PL line of the third peak with a maximum at an energy of 388 meV, a fine structure with a series of closely spaced peaks is observed, which allows us to attribute this signal to the emission of donor-acceptor pairs. The influence of substrate sulfidization on the quality of InAs epitaxial layers is assessed by comparing the relative area of the PL peak of bound excitons for sulfidized and nonsulfidized structures. It is shown that the decrease in the relative peak area of bound excitons after sulfidization of the substrate is due to a decrease in the number of defects in the autoepitaxial InAs layers.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Russian Microelectronics
- Vol. 53 (8) , 845-849
Impact of Sulphide Passivation of the Substrate on the Photoluminescent Properties of InAs Autoepitaxial Layers
The photoluminescent properties of autoepitaxial layers of indium arsenide are studied using low-temperature Fourier-transform infrared spectroscopy. The structures are grown by the method of chlorine hydride vapour-phase epitaxy on heavily doped n+-InAs substrates. Sulfide passivation of the substrates is carried out in a unimolar aqueous solution of sodium sulfide at room temperature, which leads to the removal of the natural oxide layer and the formation of a sulfur layer protecting the substrate surface. Three separate peaks are detected in the photoluminescence spectra of the structures, measured with a Fourier-transform infrared spectrometer at a temperature of 8 K. The peak with an energy of 415 meV is attributed to a direct interband transition in indium arsenide. The power dependence of the second peak, with an energy of 400 meV, is sublinear, which makes it possible to attribute it to the emission of bound excitons. In the PL line of the third peak with a maximum at an energy of 388 meV, a fine structure with a series of closely spaced peaks is observed, which allows us to attribute this signal to the emission of donor-acceptor pairs. The influence of substrate sulfidization on the quality of InAs epitaxial layers is assessed by comparing the relative area of the PL peak of bound excitons for sulfidized and nonsulfidized structures. It is shown that the decrease in the relative peak area of bound excitons after sulfidization of the substrate is due to a decrease in the number of defects in the autoepitaxial InAs layers.
- Open Access
- 6 October 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (3) , 271-277
Impact of substrate sulphide passivation on photoluminescent properties of InAs autoepitaxial layers
Photoluminescent properties of indium arsenide autoepitaxial layers have been investigated by low-temperature Fourier-transform infrared spectroscopy. The structures were grown by hydride vapour-phase epitaxy on heavily doped n+-InAs substrates. Sulfide passivation of the substrates was carried out in a unimolar aqueous solution of sodium sulfide at room temperature, which leads to the removal of the natural oxide layer and the formation of a sulfur layer protecting the substrate surface. Three distinct peaks were detected in the photoluminescence spectra of the structures measured on a Fourier-transform infrared spectrometer at 8 K. The peak with an energy of 415 meV corresponds to the direct interband transition in indium arsenide. The power dependence of the second peak, with an energy of 400 meV, has a sublinear character, which allowed us to attribute it to the emission of bound excitons. A structure with a series of closely spaced peaks was observed in the PL line of the third peak with a maximum at an energy of 388 meV, which allows us to attribute this signal to the emission of donor-acceptor pairs. The effect of substrate sulfidisation on the quality of InAs epitaxial layers was assessed by comparing the relative area of the PL peak of bound excitons for sulfidised and non-sulfidised structures. It is shown that the decrease in the relative peak area of bound excitons after substrate sulfidisation is due to a decrease in the number of defects in the InAs autoepitaxial layers.
- 6 October 2024
- Published by National University of Science and Technology MISiS in Materials of Electronics Engineering
- Vol. 27 (3) , 271-277
Open AccessImpact of substrate sulphide passivation on photoluminescent properties of InAs autoepitaxial layers
Photoluminescent properties of indium arsenide autoepitaxial layers have been investigated by low-temperature Fourier-transform infrared spectroscopy. The structures were grown by hydride vapour-phase epitaxy on heavily doped n+-InAs substrates. Sulfide passivation of the substrates was carried out in a unimolar aqueous solution of sodium sulfide at room temperature, which leads to the removal of the natural oxide layer and the formation of a sulfur layer protecting the substrate surface. Three distinct peaks were detected in the photoluminescence spectra of the structures measured on a Fourier-transform infrared spectrometer at 8 K. The peak with an energy of 415 meV corresponds to the direct interband transition in indium arsenide. The power dependence of the second peak, with an energy of 400 meV, has a sublinear character, which allowed us to attribute it to the emission of bound excitons. A structure with a series of closely spaced peaks was observed in the PL line of the third peak with a maximum at an energy of 388 meV, which allows us to attribute this signal to the emission of donor-acceptor pairs. The effect of substrate sulfidisation on the quality of InAs epitaxial layers was assessed by comparing the relative area of the PL peak of bound excitons for sulfidised and non-sulfidised structures. It is shown that the decrease in the relative peak area of bound excitons after substrate sulfidisation is due to a decrease in the number of defects in the InAs autoepitaxial layers.
- 6 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 31 (1: SiGeSn ) , 1-8
Structural, Optical and Electrophysical Properties of MBE-Based Multistacked GeSiSn Quantum Dots
Multistacked GeSiSn/Si quantum dot (MQD) structures of different compositions were obtained by molecular-beam epitaxy. The elastically strained state of GeSiSn/Si MQD structures was confirmed by the presence of diffraction maxima on x-ray rocking curves. The optical properties of GeSiSn/Si MQD structures were studied by Fourier transform infrared (FTIR) photoluminescence spectroscopy. The structures exhibited photoluminescence peaks in the 0.6 – 0.8 eV range originating from the QD region. The calculations showed that the observed peaks correspond to the radiative transition between the Δ 4 conduction band in Si and the energy level of heavy holes in the QDs. The peak positions in the PL spectra are in good correlation with the calculation results. It was demonstrated that the transition energy depends strongly on the composition and size of GeSiSn/Si QDs. The p-i-n photodiodes were developed based on the GeSiSn/Si MQD structures. The cutoff wavelength maximum reached the value of 2.65 μm for Ge 0.80 Si 0.11 Sn 0.09 /Si MQD p-i-n photodiodes.
- 6 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 31 (1: SiGeSn ) , 1-8
Structural, Optical and Electrophysical Properties of MBE-Based Multistacked GeSiSn Quantum Dots
Multistacked GeSiSn/Si quantum dot (MQD) structures of different compositions were obtained by molecular-beam epitaxy. The elastically strained state of GeSiSn/Si MQD structures was confirmed by the presence of diffraction maxima on x-ray rocking curves. The optical properties of GeSiSn/Si MQD structures were studied by Fourier transform infrared (FTIR) photoluminescence spectroscopy. The structures exhibited photoluminescence peaks in the 0.6 – 0.8 eV range originating from the QD region. The calculations showed that the observed peaks correspond to the radiative transition between the Δ 4 conduction band in Si and the energy level of heavy holes in the QDs. The peak positions in the PL spectra are in good correlation with the calculation results. It was demonstrated that the transition energy depends strongly on the composition and size of GeSiSn/Si QDs. The p-i-n photodiodes were developed based on the GeSiSn/Si MQD structures. The cutoff wavelength maximum reached the value of 2.65 μm for Ge 0.80 Si 0.11 Sn 0.09 /Si MQD p-i-n photodiodes.
- 17 April 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (3)
Effects of high-temperature annealing on vacancy complexes and luminescence properties in multilayer periodic structures with elastically strained GeSiSn layers
Effects of postgrowth high-temperature annealing on vacancy complexes and photoluminescence (PL) from GeSiSn/Si multiple quantum wells (MQWs) are studied. The series of PL peaks related to the vacancy-tin complexes was observed for as-grown samples including different structures, such as GeSiSn/Si MQWs, multilayer periodic structure with GeSiSn quantum dots (QDs), GeSn cross-structures upon GeSiSn/Si MQWs, and thick GeSiSn layers. The PL band intensity is significantly reduced after annealing at 700 °C corresponding to the reduction in vacancy density, as demonstrated by the positron annihilation spectroscopy (PAS) data. Such annealing also results in the appearance of the PL signal related to the interband optical transitions in GeSiSn/Si MQWs. However, the high temperature could negatively impact the sharpness of heterointerfaces due to Sn diffusion, thus limiting the PL efficiency. To improve the luminescence properties of GeSiSn/Si structures, we proposed a two-stage technique combining both the annealing and subsequent treatment of samples in a hydrogen plasma at 200 °C. The plasma treatment significantly reduces the PL band of vacancy-related defects, whereas annealing at a moderate temperature of ∼600 °C prevents the blurring of heterointerfaces. As a result, we demonstrate an increase in the relative efficiency of interband PL of type II GeSiSn/Si MQW structures emitting in the range of 1.5–2 μm.
- 17 April 2024
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 42 (3)
Effects of high-temperature annealing on vacancy complexes and luminescence properties in multilayer periodic structures with elastically strained GeSiSn layers
Effects of postgrowth high-temperature annealing on vacancy complexes and photoluminescence (PL) from GeSiSn/Si multiple quantum wells (MQWs) are studied. The series of PL peaks related to the vacancy-tin complexes was observed for as-grown samples including different structures, such as GeSiSn/Si MQWs, multilayer periodic structure with GeSiSn quantum dots (QDs), GeSn cross-structures upon GeSiSn/Si MQWs, and thick GeSiSn layers. The PL band intensity is significantly reduced after annealing at 700 °C corresponding to the reduction in vacancy density, as demonstrated by the positron annihilation spectroscopy (PAS) data. Such annealing also results in the appearance of the PL signal related to the interband optical transitions in GeSiSn/Si MQWs. However, the high temperature could negatively impact the sharpness of heterointerfaces due to Sn diffusion, thus limiting the PL efficiency. To improve the luminescence properties of GeSiSn/Si structures, we proposed a two-stage technique combining both the annealing and subsequent treatment of samples in a hydrogen plasma at 200 °C. The plasma treatment significantly reduces the PL band of vacancy-related defects, whereas annealing at a moderate temperature of ∼600 °C prevents the blurring of heterointerfaces. As a result, we demonstrate an increase in the relative efficiency of interband PL of type II GeSiSn/Si MQW structures emitting in the range of 1.5–2 μm.
- Open Access
- 1 March 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2227 (1) , 012009
Investigation of infrared photoluminescence spectra of Ge1-x-y Si x Sn y /Si nanostructures
This work investigates the luminescence properties of pseudomorphic nanostructures with Ge1-x-y Si x Sn y /Si superlattices (SL) grown on silicon substrates by molecular beam epitaxy. It was shown that the addition of Sn (y = 0.07) to the alloy layers within the structures results in a significant shift of the photoluminescence (PL) spectra towards longer wavelengths (2.0-3.5 μm) compared to similar Ge0.7Si0.3/Si superlattices. A series of experiments involving etching the structures to different depths have shown that the observed photoluminescence occurs exactly in the Ge1-x-y Si x Sn y /Si SL region, with the sublinear nature of the PL power dependence indicating the probable participation of defects in radiative recombination. A significant increase in low-temperature PL was observed with a decrease in the thickness of narrow-gap SL layers from 6 to 2 nm, as well as with an increase in the number of superlattice periods from 10 to 30. The obtained structures exhibit relatively good temperature stability of luminescence, which is preserved up to 160 K. Thus, the current work demonstrates the possibility of creating mid-wave IR emitting epitaxial structures on silicon substrates.
- 1 March 2022
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2227 (1) , 012009
Open AccessInvestigation of infrared photoluminescence spectra of Ge1-x-y Si x Sn y /Si nanostructures
This work investigates the luminescence properties of pseudomorphic nanostructures with Ge1-x-y Si x Sn y /Si superlattices (SL) grown on silicon substrates by molecular beam epitaxy. It was shown that the addition of Sn (y = 0.07) to the alloy layers within the structures results in a significant shift of the photoluminescence (PL) spectra towards longer wavelengths (2.0-3.5 μm) compared to similar Ge0.7Si0.3/Si superlattices. A series of experiments involving etching the structures to different depths have shown that the observed photoluminescence occurs exactly in the Ge1-x-y Si x Sn y /Si SL region, with the sublinear nature of the PL power dependence indicating the probable participation of defects in radiative recombination. A significant increase in low-temperature PL was observed with a decrease in the thickness of narrow-gap SL layers from 6 to 2 nm, as well as with an increase in the number of superlattice periods from 10 to 30. The obtained structures exhibit relatively good temperature stability of luminescence, which is preserved up to 160 K. Thus, the current work demonstrates the possibility of creating mid-wave IR emitting epitaxial structures on silicon substrates.
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Semiconductors
- Vol. 56 (8) , 547
Investigation of the effect of annealing and composition on infrared photoluminescence of GeSiSn/Si multiple quantum well nanoheterostructures
The results of studying the photoluminescence of nanoheterostructures with multiple Ge1-x-ySixSny/Si quantum wells grown by molecular beam epitaxy on silicon substrates and annealed at different temperatures are presented. As a result of the annealing of the structures, a multifold increase in the intensity of the luminescence peak close in energy to the optical transitions within the multiple quantum wells is observed. The optimal annealing temperature and duration are determined in terms of the intensity of photoluminescence. The luminescent properties of a series of annealed Ge0.93-xSixSn0.07/Si structures with different Ge compositions are investigated. As a result, a shift of the low-temperature photoluminescence peak towards lower energies with an increase in the fraction of germanium in the alloy composition is shown. Thus, the possibility of controlling the luminescence spectrum of Ge0.93-xSixSn0.07/Si nanoheterostructures in the wavelength range of 1.3-2.0 μm is demonstrated. Keywords: nanoheterostructures, photoluminescence, molecular beam epitaxy, infrared emitters.
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Semiconductors
- Vol. 56 (8) , 547
Investigation of the effect of annealing and composition on infrared photoluminescence of GeSiSn/Si multiple quantum well nanoheterostructures
The results of studying the photoluminescence of nanoheterostructures with multiple Ge1-x-ySixSny/Si quantum wells grown by molecular beam epitaxy on silicon substrates and annealed at different temperatures are presented. As a result of the annealing of the structures, a multifold increase in the intensity of the luminescence peak close in energy to the optical transitions within the multiple quantum wells is observed. The optimal annealing temperature and duration are determined in terms of the intensity of photoluminescence. The luminescent properties of a series of annealed Ge0.93-xSixSn0.07/Si structures with different Ge compositions are investigated. As a result, a shift of the low-temperature photoluminescence peak towards lower energies with an increase in the fraction of germanium in the alloy composition is shown. Thus, the possibility of controlling the luminescence spectrum of Ge0.93-xSixSn0.07/Si nanoheterostructures in the wavelength range of 1.3-2.0 μm is demonstrated. Keywords: nanoheterostructures, photoluminescence, molecular beam epitaxy, infrared emitters.
- Open Access
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Физика и техника полупроводников
- Vol. 56 (8) , 765
Исследование влияния отжига и состава на инфракрасную фотолюминесценцию наногетероструктур GeSiSn/Si с множественными квантовыми ямами
Исследование влияния отжига и состава на инфракрасную фотолюминесценцию наногетероструктур GeSiSn/Si с множественными квантовыми ямами
- 1 January 2022
- Published by Ioffe Institute Russian Academy of Sciences in Физика и техника полупроводников
- Vol. 56 (8) , 765
Open AccessИсследование влияния отжига и состава на инфракрасную фотолюминесценцию наногетероструктур GeSiSn/Si с множественными квантовыми ямами
Исследование влияния отжига и состава на инфракрасную фотолюминесценцию наногетероструктур GeSiSn/Si с множественными квантовыми ямами
- 3 December 2021
- Published by Springer Nature in Russian Physics Journal
- Vol. 64 (8) , 1505-1512
Structural and Optical Properties of a Hybrid Material Based on Tin Oxides and Multilayer Periodic Structures with Pseudomorphic GeSiSn Layers
- 3 December 2021
- Published by Springer Nature in Russian Physics Journal
- Vol. 64 (8) , 1505-1512
Structural and Optical Properties of a Hybrid Material Based on Tin Oxides and Multilayer Periodic Structures with Pseudomorphic GeSiSn Layers