Hu Ni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hu Ni has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Bin Yang
University of Shanghai for Science and Technology
4 shared publications Hua Yan
School of Energy and Power Engineering/Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, University of Shanghai for Science and Technology
2 shared publications- Yang Yang
School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China
2 shared publications Zhinxin Wang
Shanghai Space Propulsion Technology Research Institute
2 shared publications- Zhiquan Shi
Shanghai Space Propulsion Technology Research Institute
2 shared publications Bin Yang
1 shared publication
Latest Publications
- Open Access
- 21 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Generation, ignition and combustion of molten aluminum spray towards energy conversion
- 21 July 2026
- Published by Elsevier in Proceedings of the Combustion Institute
- Vol. 42
Open AccessGeneration, ignition and combustion of molten aluminum spray towards energy conversion
- 20 January 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (3) , 544-547
Research on color image-based multispectral reconstruction methods for candle flames
A multispectral reconstruction method for flame color images based on K-means clustering and backpropagation neural networks (BPNN) is proposed to overcome the low spectral resolution of temperature measurement using color RGB three-band radiation images. A synchronized imaging system with an RGB camera and a 25-band multispectral camera was built to capture candle flame images. Image partitioning created a training set linking the three-band RGB and 25-band multi-spectral responses. Neural network training established a mapping between them. Spectral reconstruction of the candle flame images achieved an average relative error below 5%. The temperature inversion yielded an average error of 31.5 K, with a mean error of 1.79% in the error distribution, respectively, with test set R 2 values of 0.97–0.99, confirming high model accuracy. This work demonstrates the feasibility of merging the spatial advantages of RGB images with the spectral advantages of multispectral data, offering a new approach for dynamic flame temperature field monitoring.
- 20 January 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (3) , 544-547
Research on color image-based multispectral reconstruction methods for candle flames
A multispectral reconstruction method for flame color images based on K-means clustering and backpropagation neural networks (BPNN) is proposed to overcome the low spectral resolution of temperature measurement using color RGB three-band radiation images. A synchronized imaging system with an RGB camera and a 25-band multispectral camera was built to capture candle flame images. Image partitioning created a training set linking the three-band RGB and 25-band multi-spectral responses. Neural network training established a mapping between them. Spectral reconstruction of the candle flame images achieved an average relative error below 5%. The temperature inversion yielded an average error of 31.5 K, with a mean error of 1.79% in the error distribution, respectively, with test set R 2 values of 0.97–0.99, confirming high model accuracy. This work demonstrates the feasibility of merging the spatial advantages of RGB images with the spectral advantages of multispectral data, offering a new approach for dynamic flame temperature field monitoring.
- 24 October 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (21) , 6161-6164
Flame temperature and emissivity distribution measurement of solid propellant based on clustering analysis of multispectral radiation images
To measure the combustion parameters of a solid propellant, this Letter researches the fitting method for flame temperature and emissivity based on multispectral images and proposes the particle swarm optimization–K-means (PSO–K-means) clustering optimization algorithm of a flame multispectral image. Considering the difference in flame radiation characteristics in different regions, the flame multispectral image is clustered, and spectra in different regions are analyzed and selected in different fitting bands to inverse temperature and emissivity. On this basis, the method is applied to measure solid propellant combustion parameters with different formulations. The measurement shows that the flame temperature is between 1700 and 2100 K, and the emissivity is concentrated in 0.1–0.5. Compared with temperature measurements obtained from tungsten–rhenium thermocouples, the relative deviation of multispectral imaging thermometry is less than 5%. The distribution characteristics of solid propellant combustion parameters with different formulations were analyzed, which provided important data support for evaluating combustion conditions and optimizing solid propellant formulations.
- 24 October 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (21) , 6161-6164
Flame temperature and emissivity distribution measurement of solid propellant based on clustering analysis of multispectral radiation images
To measure the combustion parameters of a solid propellant, this Letter researches the fitting method for flame temperature and emissivity based on multispectral images and proposes the particle swarm optimization–K-means (PSO–K-means) clustering optimization algorithm of a flame multispectral image. Considering the difference in flame radiation characteristics in different regions, the flame multispectral image is clustered, and spectra in different regions are analyzed and selected in different fitting bands to inverse temperature and emissivity. On this basis, the method is applied to measure solid propellant combustion parameters with different formulations. The measurement shows that the flame temperature is between 1700 and 2100 K, and the emissivity is concentrated in 0.1–0.5. Compared with temperature measurements obtained from tungsten–rhenium thermocouples, the relative deviation of multispectral imaging thermometry is less than 5%. The distribution characteristics of solid propellant combustion parameters with different formulations were analyzed, which provided important data support for evaluating combustion conditions and optimizing solid propellant formulations.
- 22 April 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (13) , 3420-3429
Synchronized measurement method of burning rate and combustion temperature of a solid propellant specimen
To characterize the combustion properties of solid propellants, the synchronized measurement method of burning rate and combustion temperature is proposed combined shadow imaging and radiation imaging. Using spectroscopic and filtering imaging, shadow and radiation images of a solid propellant specimen are obtained synchronously. Burning rate is calculated by burning surface movement velocity of shadow images, and combustion temperature is calculated by radiation image thermometry. Measurement accuracies of burning rate and combustion temperature of the solid propellant specimen are validated by other independent measurement methods. On this basis, the synchronized measurements of burning rate and combustion temperature of different formulations of solid propellant specimens under different working conditions are carried out. The results show that the influence on burning rate and combustion temperature of pressure and formulas is different. Therefore, the synchronized measurement of burning rate and combustion temperature can provide more direct data support for the evaluation of solid propellant combustion performance.
- 22 April 2024
- Published by Optica Publishing Group in Applied Optics
- Vol. 63 (13) , 3420-3429
Synchronized measurement method of burning rate and combustion temperature of a solid propellant specimen
To characterize the combustion properties of solid propellants, the synchronized measurement method of burning rate and combustion temperature is proposed combined shadow imaging and radiation imaging. Using spectroscopic and filtering imaging, shadow and radiation images of a solid propellant specimen are obtained synchronously. Burning rate is calculated by burning surface movement velocity of shadow images, and combustion temperature is calculated by radiation image thermometry. Measurement accuracies of burning rate and combustion temperature of the solid propellant specimen are validated by other independent measurement methods. On this basis, the synchronized measurements of burning rate and combustion temperature of different formulations of solid propellant specimens under different working conditions are carried out. The results show that the influence on burning rate and combustion temperature of pressure and formulas is different. Therefore, the synchronized measurement of burning rate and combustion temperature can provide more direct data support for the evaluation of solid propellant combustion performance.
- Open Access
- 17 April 2024
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 19 (4) , e0301349
Short-term forecasting approach of single well production based on multi-intelligent agent hybrid model
The short-term prediction of single well production can provide direct data support for timely guiding the optimization and adjustment of oil well production parameters and studying and judging oil well production conditions. In view of the coupling effect of complex factors on the daily output of a single well, a short-term prediction method based on a multi-agent hybrid model is proposed, and a short-term prediction process of single well output is constructed. First, CEEMDAN method is used to decompose and reconstruct the original data set, and the sliding window method is used to compose the data set with the obtained components. Features of components by decomposition are described as feature vectors based on values of fuzzy entropy and autocorrelation coefficient, through which those components are divided into two groups using cluster algorithm for prediction with two sub models. Optimized online sequential extreme learning machine and the deep learning model based on encoder-decoder structure using self-attention are developed as sub models to predict the grouped data, and the final predicted production comes from the sum of prediction values by sub models. The validity of this method for short-term production prediction of single well daily oil production is verified. The statistical value of data deviation and statistical test methods are introduced as the basis for comparative evaluation, and comparative models are used as the reference model to evaluate the prediction effect of the above multi-agent hybrid model. Results indicated that the proposed hybrid model has performed better with MAE value of 0.0935, 0.0694 and 0.0593 in three cases, respectively. By comparison, the short-term prediction method of single well production based on multi-agent hybrid model has considerably improved the statistical value of prediction deviation of selected oil well data in different periods. Through statistical test, the multi-agent hybrid model is superior to the comparative models. Therefore, the short-term prediction method of single well production based on a multi-agent hybrid model can effectively optimize oilfield production parameters and study and judge oil well production conditions.
- 17 April 2024
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 19 (4) , e0301349
Open AccessShort-term forecasting approach of single well production based on multi-intelligent agent hybrid model
The short-term prediction of single well production can provide direct data support for timely guiding the optimization and adjustment of oil well production parameters and studying and judging oil well production conditions. In view of the coupling effect of complex factors on the daily output of a single well, a short-term prediction method based on a multi-agent hybrid model is proposed, and a short-term prediction process of single well output is constructed. First, CEEMDAN method is used to decompose and reconstruct the original data set, and the sliding window method is used to compose the data set with the obtained components. Features of components by decomposition are described as feature vectors based on values of fuzzy entropy and autocorrelation coefficient, through which those components are divided into two groups using cluster algorithm for prediction with two sub models. Optimized online sequential extreme learning machine and the deep learning model based on encoder-decoder structure using self-attention are developed as sub models to predict the grouped data, and the final predicted production comes from the sum of prediction values by sub models. The validity of this method for short-term production prediction of single well daily oil production is verified. The statistical value of data deviation and statistical test methods are introduced as the basis for comparative evaluation, and comparative models are used as the reference model to evaluate the prediction effect of the above multi-agent hybrid model. Results indicated that the proposed hybrid model has performed better with MAE value of 0.0935, 0.0694 and 0.0593 in three cases, respectively. By comparison, the short-term prediction method of single well production based on multi-agent hybrid model has considerably improved the statistical value of prediction deviation of selected oil well data in different periods. Through statistical test, the multi-agent hybrid model is superior to the comparative models. Therefore, the short-term prediction method of single well production based on a multi-agent hybrid model can effectively optimize oilfield production parameters and study and judge oil well production conditions.