Utkir Uljayev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Utkir Uljayev has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ishmumin D. Yadgarov
Institute of Ion-Plasma and Laser Technologies named after U.A. Arifov Uzbekistan Academy Sciences 100125 Tashkent Uzbekistan
2 shared publications Shahnozakhon Muminova
Denov Institute of Entrepreneurship and Pedagogy 360 Denov City 190507 Surkhandarya Region Uzbekistan
2 shared publicationsAbror Ulukmuradov
Tashkent Institute of Textile and Light Industry 5 Shakhdjakhon Str. 100100 Tashkent Uzbekistan
1 shared publication- Abror Ulukmuradov
Tashkent Institute of Textile and Light Industry 100100 Tashkent Uzbekistan
1 shared publication - Ahlem Guesmi
Chemistry Department, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), P.O. Box 5701, Riyadh 11432, Saudi Arabia
1 shared publication - Bakhodir Saydullaev
Alfraganus University, Tashkent, Uzbekistan
1 shared publication
Latest Publications
- Open Access
Enhancing Photocatalytic Degradation Using Cu-CoS2 Nanoparticles for Solar-Driven Decolorization of Textile Dye Contaminants in Wastewater
Copper cobalt sulfide (Cu-CoS2) nanoparticles (NPs) were synthesized via the co-precipitation method in the present study. The synthesized nanoparticles were employed as photocatalysts for the degradation of two hazardous dyes, Eosin B (EB) and Rhodamine B (RB), under sunlight irradiation. The synthesized nanoparticles were characterized using Energy Dispersive X-ray spectroscopy, Scanning Electron Microscopy, UV-Visible spectroscopy, Fourier Transform Infrared spectroscopy, and X-ray Diffraction analysis. The calculated optical band gap of Cu-CoS2 was 2.06 eV, while the point of zero charge (PZC) was determined to be 7. The XRD results confirmed the crystalline nature of the Cu-CoS2 nanoparticles with an average crystallite size of 28.23 nm. The catalyst exhibited higher photocatalytic degradation efficiency for EB than for RB in single-dye solutions. In contrast, the presence of EB in the binary dye mixture did not significantly influence the degradation of RB. The effects of various operational parameters, including dye concentration, pH, temperature, and catalyst dosage, were systematically investigated. The photocatalytic degradation efficiency of both dyes decreased with increasing initial dye concentration. Optimum degradation conditions for both single and binary dye systems were obtained at dye concentrations of 40:20 μM, pH 5 for EB, pH 9 for RB, and a temperature of 50 °C. The maximum degradation efficiencies achieved in single-dye solutions were 97% for RB and 92% for EB, whereas degradation efficiencies of 98% for RB and 82% for EB were observed in binary dye systems. Furthermore, first-order and second-order kinetic models were applied to evaluate the photodegradation process, and the experimental data showed better agreement with the second-order kinetic model.
Open AccessEnhancing Photocatalytic Degradation Using Cu-CoS2 Nanoparticles for Solar-Driven Decolorization of Textile Dye Contaminants in Wastewater
Copper cobalt sulfide (Cu-CoS2) nanoparticles (NPs) were synthesized via the co-precipitation method in the present study. The synthesized nanoparticles were employed as photocatalysts for the degradation of two hazardous dyes, Eosin B (EB) and Rhodamine B (RB), under sunlight irradiation. The synthesized nanoparticles were characterized using Energy Dispersive X-ray spectroscopy, Scanning Electron Microscopy, UV-Visible spectroscopy, Fourier Transform Infrared spectroscopy, and X-ray Diffraction analysis. The calculated optical band gap of Cu-CoS2 was 2.06 eV, while the point of zero charge (PZC) was determined to be 7. The XRD results confirmed the crystalline nature of the Cu-CoS2 nanoparticles with an average crystallite size of 28.23 nm. The catalyst exhibited higher photocatalytic degradation efficiency for EB than for RB in single-dye solutions. In contrast, the presence of EB in the binary dye mixture did not significantly influence the degradation of RB. The effects of various operational parameters, including dye concentration, pH, temperature, and catalyst dosage, were systematically investigated. The photocatalytic degradation efficiency of both dyes decreased with increasing initial dye concentration. Optimum degradation conditions for both single and binary dye systems were obtained at dye concentrations of 40:20 μM, pH 5 for EB, pH 9 for RB, and a temperature of 50 °C. The maximum degradation efficiencies achieved in single-dye solutions were 97% for RB and 92% for EB, whereas degradation efficiencies of 98% for RB and 82% for EB were observed in binary dye systems. Furthermore, first-order and second-order kinetic models were applied to evaluate the photodegradation process, and the experimental data showed better agreement with the second-order kinetic model.
- 30 April 2026
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 32 (5)
Atomistic insights into charge transfer and lattice thermal transport in boron-functionalized DWCNT
This study investigates the influence of boron (B) doping on the electrical and thermal transport properties of double-walled carbon nanotubes (DWCNT) with chiral indices (8,0) @ (17,0) over a wide temperature range. Boron incorporation modulates the partial charge distribution, enhancing p-type semiconducting behavior at low doping concentrations, while higher doping levels induce substitutional disorder and defect formation, leading to reduced electrical conductivity. Thermal transport is also affected, as defect-induced phonon scattering and mass-difference effects suppress phonon propagation at elevated doping levels. The results highlight the critical role of both dopant concentration and temperature in controlling charge redistribution, phonon scattering, and overall transport efficiency in DWCNT. All simulations were performed using classical molecular dynamics (MD) techniques. Double-walled carbon nanotube structures with chiral indices (8,0)@(17,0) were constructed and doped with boron at concentrations ranging from 0 to 9.65%. Partial atomic charges were analyzed to study charge redistribution, and non-equilibrium MD simulations were employed to compute thermal conductivity. Temperature-dependent behavior was evaluated by performing simulations across a broad temperature range. The interactions between carbon and boron atoms were modeled using validated force fields suitable for covalent systems, and phonon scattering effects were analyzed to quantify the impact of doping on thermal transport.
- 30 April 2026
- Published by Springer Nature in Journal of Molecular Modeling
- Vol. 32 (5)
Atomistic insights into charge transfer and lattice thermal transport in boron-functionalized DWCNT
This study investigates the influence of boron (B) doping on the electrical and thermal transport properties of double-walled carbon nanotubes (DWCNT) with chiral indices (8,0) @ (17,0) over a wide temperature range. Boron incorporation modulates the partial charge distribution, enhancing p-type semiconducting behavior at low doping concentrations, while higher doping levels induce substitutional disorder and defect formation, leading to reduced electrical conductivity. Thermal transport is also affected, as defect-induced phonon scattering and mass-difference effects suppress phonon propagation at elevated doping levels. The results highlight the critical role of both dopant concentration and temperature in controlling charge redistribution, phonon scattering, and overall transport efficiency in DWCNT. All simulations were performed using classical molecular dynamics (MD) techniques. Double-walled carbon nanotube structures with chiral indices (8,0)@(17,0) were constructed and doped with boron at concentrations ranging from 0 to 9.65%. Partial atomic charges were analyzed to study charge redistribution, and non-equilibrium MD simulations were employed to compute thermal conductivity. Temperature-dependent behavior was evaluated by performing simulations across a broad temperature range. The interactions between carbon and boron atoms were modeled using validated force fields suitable for covalent systems, and phonon scattering effects were analyzed to quantify the impact of doping on thermal transport.
- Open Access
- 14 March 2026
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 1,p. 351-356
Radiation-Induced Phase Transformations, Point Defect Aggregation, and Nanoparticle Formation in Gamma-Irradiated NaCl Crystals
For the first time, the influence of growth Na/Cl non-stoichiometry at the surface of a NaCl single crystal on its phase composition, gamma-irradiation-induced point-defect aggregation in both sublattices, and nanoparticle growth was studied using a combination of experimental methods and modern analytical instruments. It was found that under irradiation with doses <1 MR, the initial impurity nanophases NaClO3 and Na2O on the surface are ruptured, and instead Na2Cl, NaCl, NaOH, and metallic Na and NaH are formed.
- 14 March 2026
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 1,p. 351-356
Open AccessRadiation-Induced Phase Transformations, Point Defect Aggregation, and Nanoparticle Formation in Gamma-Irradiated NaCl Crystals
For the first time, the influence of growth Na/Cl non-stoichiometry at the surface of a NaCl single crystal on its phase composition, gamma-irradiation-induced point-defect aggregation in both sublattices, and nanoparticle growth was studied using a combination of experimental methods and modern analytical instruments. It was found that under irradiation with doses <1 MR, the initial impurity nanophases NaClO3 and Na2O on the surface are ruptured, and instead Na2Cl, NaCl, NaOH, and metallic Na and NaH are formed.
- Open Access
- 8 September 2025
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 3,p. 390-397
Impact of Boron Doping on Charge Distribution and Thermal Conductivity in Double-Walled Carbon Nanotubes
This study investigates the effect of boron (B) doping on the electrical and thermal conductivity properties of single-walled carbon nanotubes (DWNTs) at various temperatures (300 K to 1500 K). The incorporation of boron atoms into DWNTs (5,5)@(10,10) was analyzed to explore how different doping levels (ρ%) influence the partial charge distribution and thermal conductivity. Our findings show that boron doping increases the partial charge within the nanotube structure, with a nonlinear increase in charge as the doping concentration rises from 0% to 10%. This is due to the lower electronegativity of boron, which introduces hole carriers and enhances p-type semiconductor behavior. However, at higher doping concentrations (above 5%), defects disrupt the π-electron network, reducing electrical conductivity. Thermal conductivity experiments indicate that the presence of boron leads to a decrease in heat transfer efficiency, especially at higher doping levels (>6%), where defect-induced phonon scattering significantly reduces the thermal conductivity. The results demonstrate that boron doping has a complex impact on the structural, electronic, and thermal properties of DWNTs, with temperature and doping concentration playing critical roles in determining performance.
- 8 September 2025
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 3,p. 390-397
Open AccessImpact of Boron Doping on Charge Distribution and Thermal Conductivity in Double-Walled Carbon Nanotubes
This study investigates the effect of boron (B) doping on the electrical and thermal conductivity properties of single-walled carbon nanotubes (DWNTs) at various temperatures (300 K to 1500 K). The incorporation of boron atoms into DWNTs (5,5)@(10,10) was analyzed to explore how different doping levels (ρ%) influence the partial charge distribution and thermal conductivity. Our findings show that boron doping increases the partial charge within the nanotube structure, with a nonlinear increase in charge as the doping concentration rises from 0% to 10%. This is due to the lower electronegativity of boron, which introduces hole carriers and enhances p-type semiconductor behavior. However, at higher doping concentrations (above 5%), defects disrupt the π-electron network, reducing electrical conductivity. Thermal conductivity experiments indicate that the presence of boron leads to a decrease in heat transfer efficiency, especially at higher doping levels (>6%), where defect-induced phonon scattering significantly reduces the thermal conductivity. The results demonstrate that boron doping has a complex impact on the structural, electronic, and thermal properties of DWNTs, with temperature and doping concentration playing critical roles in determining performance.
- Open Access
- 9 October 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (3) , 145-152
Boron interaction with double-walled carbon nanotubes across temperature ranges
Boron-adsorbing carbon nanotubes receive considerable attention in materials science due to their unique properties and potential applications. In particular, boron-adsorbing double-walled carbon nanotubes (DWNTs) exhibit a wide range of tunable electronic and optoelectronic properties. This study explores the influence of boron atoms on metallic (5,5@10,10) and semiconducting (8,0@17,0) DWNTs. We examine alterations in partial charge depending on the quantity of boron atoms adsorbed and affixed to the DWNT surface across temperatures from 300 K to 900 K. The results show that in both DWNTs, with the increase of energy corresponding to the temperature, the adsorption index of boron atoms (adsorbed to the first layer of DWNT) and the positive partial charge increase. Specifically, the maximum partial charge of DWNT(8,0)@(17,0) and DWNT(5,5)@(10,10) is 1.94e and 1.30e (at 300 K), 4.87e and 3.66e (at 600 K), 6.97e and 6.16e (at 900 K). Increasing boron concentration leads to heightened positive partial charge of DWNTs. This, in turn, affects the conductivity of the nanotube.
- 9 October 2024
- Published by Pensoft Publishers in Modern Electronic Materials
- Vol. 10 (3) , 145-152
Open AccessBoron interaction with double-walled carbon nanotubes across temperature ranges
Boron-adsorbing carbon nanotubes receive considerable attention in materials science due to their unique properties and potential applications. In particular, boron-adsorbing double-walled carbon nanotubes (DWNTs) exhibit a wide range of tunable electronic and optoelectronic properties. This study explores the influence of boron atoms on metallic (5,5@10,10) and semiconducting (8,0@17,0) DWNTs. We examine alterations in partial charge depending on the quantity of boron atoms adsorbed and affixed to the DWNT surface across temperatures from 300 K to 900 K. The results show that in both DWNTs, with the increase of energy corresponding to the temperature, the adsorption index of boron atoms (adsorbed to the first layer of DWNT) and the positive partial charge increase. Specifically, the maximum partial charge of DWNT(8,0)@(17,0) and DWNT(5,5)@(10,10) is 1.94e and 1.30e (at 300 K), 4.87e and 3.66e (at 600 K), 6.97e and 6.16e (at 900 K). Increasing boron concentration leads to heightened positive partial charge of DWNTs. This, in turn, affects the conductivity of the nanotube.
- Open Access
- 5 March 2024
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 1,p. 361-365
Nitrogen Adsorption on Double-Walled Carbon Nanotube at Different Temperatures: Mechanistic Insights from Molecular Dynamics Simulations
Nitrogen-adsorbing carbon nanotubes have received considerable attention in the field of materials science due to their unique properties and potential applications. In particular, nitrogen-adsorbed double-walled carbon nanotubes (DWNTs) can exhibit a wide range of tunable electronic and optoelectronic properties. In this study, the effect of different temperatures (i.e., 300, 600, and 900 K) of DWNT on nitrogen adsorption is investigated through molecular dynamics simulations using the ReaxFF potential. The simulation results show a good nitrogen storage capacity of DWNT, particularly at 600 K, reaching a maximum gravimetric density of 12.4 wt%. This study contributes to a better understanding of the mechanisms governing nitrogen adsorption onto DWNTs at different temperatures. Вуглецеві нанотрубки, що адсорбують азот, привернули значну увагу в галузі матеріалознавства завдяки своїм унікальним властивостям і можливому застосуванню. Зокрема, адсорбовані азотом подвійні стінкові вуглецеві нанотрубки (DWNTs) можуть демонструвати широкий спектр регульованих електронних і оптоелектронних властивостей. У статті досліджується вплив різних температур (300, 600 і 900 K) DWNT на адсорбцію азоту за допомогою моделювання молекулярної динаміки з використанням потенціалу ReaxFF. Результати моделювання показують хорошу здатність DWNT зберігати азот, особливо при 600 K, досягаючи максимальної ваговій щільності 12,4% мас. Це дослідження сприяє кращому розумінню механізмів адсорбції азоту на DWNT при різних температурах.
- 5 March 2024
- Published by V. N. Karazin Kharkiv National University in East European Journal of Physics
- No. 1,p. 361-365
Open AccessNitrogen Adsorption on Double-Walled Carbon Nanotube at Different Temperatures: Mechanistic Insights from Molecular Dynamics Simulations
Nitrogen-adsorbing carbon nanotubes have received considerable attention in the field of materials science due to their unique properties and potential applications. In particular, nitrogen-adsorbed double-walled carbon nanotubes (DWNTs) can exhibit a wide range of tunable electronic and optoelectronic properties. In this study, the effect of different temperatures (i.e., 300, 600, and 900 K) of DWNT on nitrogen adsorption is investigated through molecular dynamics simulations using the ReaxFF potential. The simulation results show a good nitrogen storage capacity of DWNT, particularly at 600 K, reaching a maximum gravimetric density of 12.4 wt%. This study contributes to a better understanding of the mechanisms governing nitrogen adsorption onto DWNTs at different temperatures. Вуглецеві нанотрубки, що адсорбують азот, привернули значну увагу в галузі матеріалознавства завдяки своїм унікальним властивостям і можливому застосуванню. Зокрема, адсорбовані азотом подвійні стінкові вуглецеві нанотрубки (DWNTs) можуть демонструвати широкий спектр регульованих електронних і оптоелектронних властивостей. У статті досліджується вплив різних температур (300, 600 і 900 K) DWNT на адсорбцію азоту за допомогою моделювання молекулярної динаміки з використанням потенціалу ReaxFF. Результати моделювання показують хорошу здатність DWNT зберігати азот, особливо при 600 K, досягаючи максимальної ваговій щільності 12,4% мас. Це дослідження сприяє кращому розумінню механізмів адсорбції азоту на DWNT при різних температурах.