Alicia Ng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alicia Ng has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Shu Yang
Department of Materials Science and Engineering University of Pennsylvania Philadelphia Pennsylvania USA
3 shared publications - Antonio Proctor Martinez
Department of Materials Science and Engineering University of Pennsylvania 3231 Walnut Street Philadelphia PA 19104 USA
1 shared publication - Caitlyn C. Cook
Lawrence Livermore National Laboratory Livermore CA 94550 USA
1 shared publication - Elaine Lee
Lawrence Livermore National Laboratory Livermore CA 94550 USA
1 shared publication Guanda Qiao
Department of Diagnostic Radiology and Nuclear Medicine University of Maryland School of Medicine Baltimore Maryland USA
1 shared publicationHonglin Tan
Department of Diagnostic Radiology and Nuclear Medicine University of Maryland School of Medicine Baltimore Maryland USA
1 shared publication
Latest Publications
- Open Access
- 21 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (30) , e18525
Elastomeric Micro‐Balloons for Remote Control of Cerebral Blood Flow and Real‐Time In vivo Imaging of Rodent Brain Response to Hypoperfusion
Current preclinical models of ischemic stroke in mice do not permit simultaneous and continuous in vivo brain imaging during the peri‐stroke period, therefore missing critical pathophysiological events that could be pivotal for stroke management at early stages. Here, we report the fabrication of micro‐balloons using yield‐stress fluids, in which the monolithic elastomeric wall has selectively stiffened regions for controlled inflation and elasticity, depending on the target vessels. A multi‐step bubble‐casting process successfully creates an inner layer in a channel with a diameter of <300 µm, despite the yield stress defying surface‐tension‐induced instability. The micro‐balloon can expand up to four times its initial diameter, enabling remote control of the blood flow in cerebral arteries in live mice. By allowing continuous control of the common carotid artery diameter across different states to induce stroke in a precise, reliable, and reversible manner, the micro‐balloon recapitulates clinically relevant hemodynamics in a mouse model of global brain ischemia, as evidenced by real‐time intravital microscopy and magnetic resonance imaging. The presented micro‐balloons hold significant potential to improve the treatment of stroke patients through minimally invasive interventions and in vivo imaging of pathophysiological events during the peri‐stroke phase.
- 21 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (30) , e18525
Open AccessElastomeric Micro‐Balloons for Remote Control of Cerebral Blood Flow and Real‐Time In vivo Imaging of Rodent Brain Response to Hypoperfusion
Current preclinical models of ischemic stroke in mice do not permit simultaneous and continuous in vivo brain imaging during the peri‐stroke period, therefore missing critical pathophysiological events that could be pivotal for stroke management at early stages. Here, we report the fabrication of micro‐balloons using yield‐stress fluids, in which the monolithic elastomeric wall has selectively stiffened regions for controlled inflation and elasticity, depending on the target vessels. A multi‐step bubble‐casting process successfully creates an inner layer in a channel with a diameter of <300 µm, despite the yield stress defying surface‐tension‐induced instability. The micro‐balloon can expand up to four times its initial diameter, enabling remote control of the blood flow in cerebral arteries in live mice. By allowing continuous control of the common carotid artery diameter across different states to induce stroke in a precise, reliable, and reversible manner, the micro‐balloon recapitulates clinically relevant hemodynamics in a mouse model of global brain ischemia, as evidenced by real‐time intravital microscopy and magnetic resonance imaging. The presented micro‐balloons hold significant potential to improve the treatment of stroke patients through minimally invasive interventions and in vivo imaging of pathophysiological events during the peri‐stroke phase.
- Top Cited PapersOpen Access
- 26 January 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (10) , e2416621
Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures
Cholesteric liquid crystal elastomers (CLCEs) hold great promise for mechanochromic applications in anti‐counterfeiting, smart textiles, and soft robotics, thanks to the structural color and elasticity. While CLCEs are printed via direct ink writing (DIW) to fabricate free‐standing films, complex 3D structures are not fabricated due to the opposing rheological properties necessary for cholesteric alignment and multilayer stacking. Here, 3D CLCE structures are realized by utilizing coaxial DIW to print a CLC ink within a silicone ink. By tailoring the ink compositions, and thus, the rheological properties, the cholesteric phase rapidly forms without an annealing step, while the silicone shell provides encapsulation and support to the CLCE core, allowing for layer‐by‐layer printing of self‐supported 3D structures. As a demonstration, free‐standing bistable thin‐shell domes are printed. Color changes due to compressive and tensile stresses can be witnessed from the top and bottom of the inverted domes, respectively. When the domes are arranged in an array and inverted, they can snap back to their base state by uniaxial stretching, thereby functioning as mechanical sensors with memory. The additive manufacturing platform enables the rapid fabrication of 3D mechanochromic sensors thereby expanding the realm of potential applications for CLCEs.
- 26 January 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (10) , e2416621
Top Cited PapersOpen AccessCoaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures
Cholesteric liquid crystal elastomers (CLCEs) hold great promise for mechanochromic applications in anti‐counterfeiting, smart textiles, and soft robotics, thanks to the structural color and elasticity. While CLCEs are printed via direct ink writing (DIW) to fabricate free‐standing films, complex 3D structures are not fabricated due to the opposing rheological properties necessary for cholesteric alignment and multilayer stacking. Here, 3D CLCE structures are realized by utilizing coaxial DIW to print a CLC ink within a silicone ink. By tailoring the ink compositions, and thus, the rheological properties, the cholesteric phase rapidly forms without an annealing step, while the silicone shell provides encapsulation and support to the CLCE core, allowing for layer‐by‐layer printing of self‐supported 3D structures. As a demonstration, free‐standing bistable thin‐shell domes are printed. Color changes due to compressive and tensile stresses can be witnessed from the top and bottom of the inverted domes, respectively. When the domes are arranged in an array and inverted, they can snap back to their base state by uniaxial stretching, thereby functioning as mechanical sensors with memory. The additive manufacturing platform enables the rapid fabrication of 3D mechanochromic sensors thereby expanding the realm of potential applications for CLCEs.
- Open Access
- 11 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (34)
Active‐Textile Yarns and Embroidery Enabled by Wet‐Spun Liquid Crystalline Elastomer Filaments
Liquid crystal elastomers (LCEs) are promising candidates for creating adaptive textile‐based devices that can actively and reversibly respond to the environment for sensing and communication. Despite recent advances in scalable manufacturing of LCE filaments for textile engineering, the actuation modes of various LCE filaments focus on contractual deformations. In this study, manufacture of polydomain LCE filaments with potential scalability by wet‐spinning is studied, followed by mechanical exploitation to program liquid crystal mesogen alignments, demonstrating both contractual and twisting actuation profiles. By plying these LCE filaments into yarns with different twist concentrations, yarn actuation, and mechanical performance is tuned. Yarns plied at 4 twists per cm can generate up to a seven‐fold increase in elastic modulus while maintaining 90% of actuation strain performance from their native filament. The contractual and twisting LCE filaments are then embroidered with varying stitch types to spatially program complex 2D‐to‐3D transformations in “inactive” fabrics. It is shown that a running stitch can actuate up to 15% in strain and create angular displacements in fabric with twisted mesogen alignments. It is envisioned that the wet‐spun polydomain LCE filaments for diverse plied yarn production together with textile engineering will open new opportunities to design smart textiles and soft robotics.
- 11 April 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (34)
Open AccessActive‐Textile Yarns and Embroidery Enabled by Wet‐Spun Liquid Crystalline Elastomer Filaments
Liquid crystal elastomers (LCEs) are promising candidates for creating adaptive textile‐based devices that can actively and reversibly respond to the environment for sensing and communication. Despite recent advances in scalable manufacturing of LCE filaments for textile engineering, the actuation modes of various LCE filaments focus on contractual deformations. In this study, manufacture of polydomain LCE filaments with potential scalability by wet‐spinning is studied, followed by mechanical exploitation to program liquid crystal mesogen alignments, demonstrating both contractual and twisting actuation profiles. By plying these LCE filaments into yarns with different twist concentrations, yarn actuation, and mechanical performance is tuned. Yarns plied at 4 twists per cm can generate up to a seven‐fold increase in elastic modulus while maintaining 90% of actuation strain performance from their native filament. The contractual and twisting LCE filaments are then embroidered with varying stitch types to spatially program complex 2D‐to‐3D transformations in “inactive” fabrics. It is shown that a running stitch can actuate up to 15% in strain and create angular displacements in fabric with twisted mesogen alignments. It is envisioned that the wet‐spun polydomain LCE filaments for diverse plied yarn production together with textile engineering will open new opportunities to design smart textiles and soft robotics.