KBKyung-Eun Byun

Kyung-Eun Byun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kyung-Eun Byun has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Promoter-driven recrystallization affording highly textured ruthenium

    by Youngchul Leem, Yoonhoo Ha, Young-Min Lee, Yong-Ryun Jo, Jeong Yub Lee, Eun-Hyoung Cho, Byeong-Gyu Chae, Jaewoo Lee, Gi-Young Jo, Seong Yong Park, et al.

    The electrical properties of polycrystalline materials are governed by crystallite characteristics and spatial arrangement. We grew ruthenium polycrystals with a near-complete out-of-plane preferred orientation and predominantly low-energy grain boundaries on amorphous dielectric substrates, without relying on epitaxial growth or lattice-matched conditions. Whereas prior studies used high-density, high-quality polycrystalline materials derived from high-purity sources, we exploited trace carbon as a transient promoter at grain boundaries, revealing that it generated transient free volume during recrystallization and thus facilitated atomic migration, driving the dynamic vertical and horizontal orientation of grains. Our findings provide microscopic insights into the engineering of grain boundary kinetics through controlled trace element incorporation. The developed strategy is applicable to other polycrystalline materials, offering versatility for advanced material design and applications.

  • Open Access

    Orientation-controlled area-selective deposition of near-single-grain ruthenium interconnects

    by Kyung-Eun Byun, Eun-Hyoung Cho, Dongmin Kim, Iaan Cho, Yu Jin Han, Taewon Jeong, Jung Yeon Won, Young Min Lee, Kyeongmin Min, Jeong Yub Lee, et al.

    As interconnects shrink to nanoscale dimensions, crystallographic disorder and grain boundaries generated during conventional conformal metal deposition increasingly dominate electron scattering. Here, we report an orientation-controlled area-selective deposition (OC-ASD) strategy that combines preferential Ru growth on a bottom metal template with periodic ozone exposure to remove Ru nuclei from SiO2 sidewalls, thereby promoting bottom-up growth from a crystalline template. This approach seamlessly fills ~25 nm vias with near-single-grain ruthenium exhibiting strong (0001) alignment, resulting in ~64% lower resistance and < 4% electrical variability compared with conventional deposition. Beyond confined geometries, this mechanism also reduces lateral overgrowth on exposed Ru patterns, providing a route towards mould-less anisotropic metal growth. These findings demonstrate that kinetic control of selective nucleation and growth can preserve crystallographic order in nanoscale interconnects, advancing strategies beyond the limitations of conventional metallization.

  • Gate structuring on n-type bilayer MoS2 field-effect transistors for ultrahigh current density

    by Junyoung Kwon, Kyoung Yeon Kim, Dongwon Jang, Min Seok Yoo, Alum Jung, Dong-Su Ko, Yoonhoo Ha, Huije Ryu, Woon Ih Choi, Yeonchoo Cho, et al.

    The foundry industry and academia are confronting the limits of Moore’s Law scaling for logic transistors. Silicon field‑effect transistors (FETs) now rely on gate‑all‑around structures and ultrathin channels, even at the cost of decreased carrier mobility and complex fabrication processes. Two‑dimensional (2D) semiconductors offer a promising alternative because they retain their crystalline quality at atomic thicknesses. Nonetheless, whether they truly exhibit higher performance than silicon remains questionable. Here, by implementing a dual‑gate structure on bilayer MoS2 FETs, we mitigate the fringing‑field barrier created by the elevated top contact and achieve high carrier densities without increasing fabrication complexity. Simulations and statistical analysis confirm that the dual‑gate compensates the fringe field, enabling a drain current of 1.55 mA µm−1 even with conventional gold contacts. Quantum‑transport simulation indicates that, with further gate‑length and equivalent‑oxide‑thickness scaling, the on-state current can reach levels comparable to silicon FETs at the 3-nm node, and monolithic 3D integration can extend the applicability of dual‑gate 2D transistors to future logic technologies.


  • Top Cited Papers

    200-mm-wafer-scale integration of polycrystalline molybdenum disulfide transistors

    by Junyoung Kwon, Minsu Seol, Joungeun Yoo, Huije Ryu, Dong-Su Ko, Min-Hyun Lee, Eun Kyu Lee, Min Seok Yoo, Gwan-Hyoung Lee, Hyeon-Jin Shin, et al.


  • Low-temperature growth of nanocrystalline graphene on metal thin films

    by Keun Wook Shin, Chang-Seok Lee, Eun-Kyu Lee, Eunji Yang, Hyangsook Lee, Junyoung Kwon, Kyung-Eun Byun


  • Open Access

    200-mm wafer scale integration of high performance polycrystalline MoS2 thin film transistors

    by Kyung-Eun Byun, Junyoung Kwon, Minsu Seol, Joungeun Yoo, Huije Ryu, Dong-Su Ko, Min-Hyun Lee, Min Seok Yoo, Gwan-Hyoung Lee, Hyeon-Jin Shin, et al.

    The demand for high-performance thin-film transistors (TFTs) has increased significantly due to the increasing functionalities of electronic devices, such as displays, sensors, and computing platforms. The requirements for TFTs have also become more stringent because future electronic products necessitate denser device arrays, lower power consumption, higher mechanical flexibility, and lower-temperature processing without compromising their performance. To meet these demands, two-dimensional (2D) semiconductors are an ideal solution due to their excellent scalability, transferability, atomically thin thickness, and relatively high carrier mobility. Nevertheless, studies on 2D materials have been limited to small laboratory-scale demonstrations, focusing on proof-of-concept devices with single-crystalline 2D films. In this study, we present industrialization strategies specifically designed for polycrystalline MoS2 TFTs on a 200-mm wafer scale. We achieved nearly 100% device yield across the wafer by processing it in one of the Samsung's 200-mm fabrication facilities. We find that the metal-semiconductor junction in polycrystalline 2D MoS2 is fundamentally different from that in its single-crystalline counterpart. Thus, we redesigned the process flow to nearly eliminate the Schottky barrier height at the MoS2-metal contact, yielding excellent FET performance equivalent to that of state-of-the-art FETs fabricated from single-crystalline flakes.