Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Behzad Farhang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In Situ Microstructure Modification Using a Layerwise Surface-Preheating Laser Scan of Ti-6Al-4V during Laser Powder Bed Fusion

    by Ahmet Alptug Tanrikulu, Behzad Farhang, Aditya Ganesh-Ram, Hamidreza Hekmatjou, Sadman Hafiz Durlov, Amirhesam Amerinatanzi

    An innovative in situ thermal approach in the domain of LPBF for Ti-6Al-4V fabrication has been carried out with results directing towards an improved fatigue life without the need for post-processing. The thermal process involves an additional laser scan with different process parameters to preheat the selected regions of each layer of the powder bed prior to their full melting. This preheating step influences the cooling rate, which in turn affects surface characteristics and subsurface microstructure, both of which are directly correlated with fatigue properties. A thorough analysis has been conducted by comparing the preheated samples with reference samples with no preheating. Without any additional thermal processing, the preheated samples showed a significant improvement over their reference counterparts. The optimized preheated sample showed an improved prior β-grain distribution with a circular morphology and thicker α laths within the even finer prior β-grain boundaries. Also, an overall increment of the c/a ratio of the HCP α has been observed, which yielded lattice strain relaxation in the localized grain structure. Furthermore, a less-profound surface roughness was observed in the preheated sample. The obtained microstructure with all these factors delivered a 10% improvement in its fatigue life with better mechanical strength overall.


  • Microstructure Evaluation of Magnetic Field–Assisted Dissimilar Laser Welding of NiTi to Stainless Steel

    by Ahmet Alptug Tanrikulu, Behzad Farhang, Aditya Krishna Ganesh-Ram, Hamidreza Hekmatjou, Amirhesam Amerinatanzi

    Significant attention has been directed to the need for a strong and lightweight welding technology for joining the NiTi shape memory alloys (SMAs) to stainless steel (SS). Dissimilar NiTi/SS joints suffer from the brittle and inevitable intermetallic components (IMCs) like TiFe, TiFe2 and FeNi that are formed during the welding process. To tackle this challenge, this study explores the use of an engineered magnetic field during the dissimilar laser welding of NiTi to SS. The presence of a magnetic field delivered a remarkable improvement in tensile strength (over 452 MPa) of the joint with a notable difference in microstructure. The effect of the magnetic field on microstructure was investigated; material characterizations showed brittle IMC-free microstructure and a change in grain growth mechanism from columnar to cellular growth during the solidification. Further, fractography analysis proved a ductile failure mode at the joint.


  • Open Access

    Innovative Fabrication Design for In Situ Martensite Decomposition and Enhanced Mechanical Properties in Laser Powder Bed Fused Ti6Al4V Alloy

    by Behzad Farhang, Ahmet Alptug Tanrikulu, Aditya Ganesh-Ram, Sadman Hafiz Durlov, Narges Shayesteh Moghaddam

    Ti6Al4V alloy (Ti64) is a popular material used in the aerospace, medical, and automotive industries due to its excellent mechanical properties. Laser Powder Bed Fusion (LPBF) is a promising manufacturing technique that can produce complex and net-shaped components with comparable mechanical properties to those produced using conventional manufacturing techniques. However, during LPBF, the rapid cooling of the material can limit its ductility, making it difficult to achieve high levels of ductility while maintaining the required tensile strength for critical applications. To address this challenge, this study presents a novel approach to controlling the microstructure of Ti64 during LPBF by using a border design surrounding the main parts. It is hypothesized that the design induces in situ martensitic decomposition at different levels during the fabrication process, which can enhance the ductility of the material without compromising its tensile strength. To achieve this aim, a series of Ti64 samples were fabricated using LPBF with varying border designs, including those without borders and with gaps from 0.5 to 4 mm. The microstructure, composition, and mechanical properties of the Reference sample were compared with those of the samples fabricated with the surrounding border design. It was found that the latter had a more homogenized microstructure, a higher density, and improvements in both ductility and tensile strength. Moreover, it was discovered that the level of property improvement and martensitic transformation can be controlled by adjusting the gap space between the border and the main part, providing flexibility in the fabrication process. Overall, this study presents a promising approach for enhancing the mechanical properties of Ti64 produced via LPBF, making it more suitable for critical applications in various industries.


  • Deep Learning Based Automatic Porosity Detection of Laser Powder Bed Fusion Additive Manufacturing

    by Syed Ibn Mohsin, Behzad Farhang, Peng Wang, Yiran Yang, Narges Shayesteh, Fazleena Badurdeen


  • Open Access

    Cost-Aware Design and Fabrication of New Support Structures in Laser Powder Bed Fusion: Microstructure and Metallurgical Properties

    by Bharath Bhushan Ravichander, Sourabh Thakare, Aditya Ganesh-Ram, Behzad Farhang, Manjunath Hanumantha, Yiran Yang, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi

    This study investigates the effect of support structures on the properties of Inconel 718 (i.e., IN718) parts produced by the laser powder bed fusion (LPBF) additive manufacturing process. Specifically, the effects of support structure shape (i.e., pin-type, angled-type, cone-type) and geometry (i.e., support wall thickness, and gap) on their composition, hardness, microstructure, and material/time consumption are investigated and compared to the conventionally fabricated Inconel 718. From the microstructural analysis, the deepest melt pools appeared to be formed in the sample fabricated on top of the pin-type support structure having a relatively low wall thickness. The XRD results conveyed that a proper selection of geometrical variables for designing support structure results in elevated levels of the strengthening phases of IN718. The sample fabricated on top of the pin-type support structure showed the highest Vickers hardness value of 460.5 HV, which was even higher than what was reported for the heat-treated wrought Inconel 718 (355–385 HV). Moreover, for the thinner support wall thickness, an improvement in the hardness value of the fabricated samples was observed. This study urges a reconsideration of the common approach of selecting supports for additive manufacturing of samples when a higher quality of the as-fabricated parts is desired.


  • Open Access

    A Prediction Model for Additive Manufacturing of Inconel 718 Superalloy

    by Bharath Bhushan Ravichander, Atabak Rahimzadeh, Behzad Farhang, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi, Mehrshad Mehrpouya

    Inconel 718 is a nickel-based superalloy and an excellent candidate for the aerospace, oil, and gas industries due to its high strength and corrosion resistance properties. The machining of IN718 is very challenging; therefore, the application of additive manufacturing (AM) technology is an effective approach to overcoming these difficulties and for the fabrication of complex geometries that cannot be manufactured by the traditional techniques. Selective laser melting (SLM), which is a laser powder bed fusion method, can be applied for the fabrication of IN718 samples with high accuracy. However, the process parameters have a high impact on the properties of the manufactured samples. In this study, a prediction model is developed for obtaining the optimal process parameters, including laser power, hatch spacing, and scanning speed, in the SLM process of the IN718 alloy. For this purpose, artificial neural network (ANN) modeling with various algorithms is employed to estimate the process outputs, namely, sample height and surface hardness. The modeling results fit perfectly with the experimental output, and this consequently proves the benefit of ANN modeling for predicting the optimal process parameters.


  • Study on the influence of post-processing parameters over microstructure and metallurgical properties of NiTi alloy

    by Kiriti Mamidi, Himanth Kumar Talla, Bharath Bhushan Ravichander, Behzad Farhang, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi

    Post-process heat treatments are conventional methods used to minimize porosities and improve the microstructure of metallic parts. It can also increase the hardness value and help tailor the mechanical properties of the part. On the other hand, the heat treatment process includes several steps and can be a costly and time-consuming procedure. The different variables and parameters in heat treatment can make this process even more complicated. Utilizing optimal heat treatment parameters decreases the cost and operation time and results in higher finish quality and better device performance. This study investigates the influence of heat treatment parameters on microstructure and metallurgical properties of NiTi shape memory alloys to find the optimum values for post-processing. The samples were cut in equally sized dimensions, and they were treated using the same equipment. Various ranges of heating duration and temperature were considered for the experiments. It was revealed that, regardless of parameters, the heat treatment process can bring about better compositional characteristics and hardness properties of NiTi. However, some particular sets of heat treatment parameters resulted in higher quality and more favorable final properties.